DPDK-dev Archive on lore.kernel.org
 help / color / Atom feed
From: Aaron Conole <aconole@redhat.com>
To: <jerinj@marvell.com>
Cc: <dev@dpdk.org>, <thomas@monjalon.net>,
	Pavan Nikhilesh <pbhagavatula@marvell.com>,
	"Olivier Matz" <olivier.matz@6wind.com>,
	"Vamsi Attunuru" <vattunuru@marvell.com>
Subject: Re: [dpdk-dev] [PATCH v1 25/27] mempool/octeontx2: add optimized dequeue operation for arm64
Date: Fri, 24 May 2019 09:32:44 -0400
Message-ID: <f7t8suw0ygz.fsf@dhcp-25.97.bos.redhat.com> (raw)
In-Reply-To: <20190523081339.56348-26-jerinj@marvell.com>

<jerinj@marvell.com> writes:

> From: Pavan Nikhilesh <pbhagavatula@marvell.com>
>
> This patch adds an optimized arm64 instruction based routine to leverage
> CPU pipeline characteristics of octeontx2. The theme is to fill the
> pipeline with CASP operations as much HW can do so that HW can do alloc()
> HW ops in full throttle.
>
> Cc: Olivier Matz <olivier.matz@6wind.com>
>
> Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
> Signed-off-by: Jerin Jacob <jerinj@marvell.com>
> Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
> ---
>  drivers/mempool/octeontx2/otx2_mempool_ops.c | 291 +++++++++++++++++++
>  1 file changed, 291 insertions(+)
>
> diff --git a/drivers/mempool/octeontx2/otx2_mempool_ops.c b/drivers/mempool/octeontx2/otx2_mempool_ops.c
> index c59bd73c0..ebe90d122 100644
> --- a/drivers/mempool/octeontx2/otx2_mempool_ops.c
> +++ b/drivers/mempool/octeontx2/otx2_mempool_ops.c
> @@ -37,6 +37,293 @@ npa_lf_aura_op_alloc_one(const int64_t wdata, int64_t * const addr,
>  	return -ENOENT;
>  }
>  
> +#if defined(RTE_ARCH_ARM64)
> +static __rte_noinline int
> +npa_lf_aura_op_search_alloc(const int64_t wdata, int64_t * const addr,
> +		void **obj_table, unsigned int n)
> +{
> +	uint8_t i;
> +
> +	for (i = 0; i < n; i++) {
> +		if (obj_table[i] != NULL)
> +			continue;
> +		if (npa_lf_aura_op_alloc_one(wdata, addr, obj_table, i))
> +			return -ENOENT;
> +	}
> +
> +	return 0;
> +}
> +
> +static  __attribute__((optimize("-O3"))) __rte_noinline int __hot
> +npa_lf_aura_op_alloc_bulk(const int64_t wdata, int64_t * const addr,
> +			  unsigned int n, void **obj_table)
> +{
> +	const __uint128_t wdata128 = ((__uint128_t)wdata << 64) | wdata;
> +	uint64x2_t failed = vdupq_n_u64(~0);
> +
> +	switch (n) {
> +	case 32:
> +	{
> +		__uint128_t t0, t1, t2, t3, t4, t5, t6, t7, t8, t9;
> +		__uint128_t t10, t11;
> +
> +		asm volatile (
> +		".cpu  generic+lse\n"
> +		"casp %[t0], %H[t0], %[wdata], %H[wdata], [%[loc]]\n"
> +		"casp %[t1], %H[t1], %[wdata], %H[wdata], [%[loc]]\n"
> +		"casp %[t2], %H[t2], %[wdata], %H[wdata], [%[loc]]\n"
> +		"casp %[t3], %H[t3], %[wdata], %H[wdata], [%[loc]]\n"
> +		"casp %[t4], %H[t4], %[wdata], %H[wdata], [%[loc]]\n"
> +		"casp %[t5], %H[t5], %[wdata], %H[wdata], [%[loc]]\n"
> +		"casp %[t6], %H[t6], %[wdata], %H[wdata], [%[loc]]\n"
> +		"casp %[t7], %H[t7], %[wdata], %H[wdata], [%[loc]]\n"
> +		"casp %[t8], %H[t8], %[wdata], %H[wdata], [%[loc]]\n"
> +		"casp %[t9], %H[t9], %[wdata], %H[wdata], [%[loc]]\n"
> +		"casp %[t10], %H[t10], %[wdata], %H[wdata], [%[loc]]\n"
> +		"casp %[t11], %H[t11], %[wdata], %H[wdata], [%[loc]]\n"
> +		"fmov d16, %[t0]\n"
> +		"fmov v16.D[1], %H[t0]\n"
> +		"casp %[t0], %H[t0], %[wdata], %H[wdata], [%[loc]]\n"
> +		"fmov d17, %[t1]\n"
> +		"fmov v17.D[1], %H[t1]\n"
> +		"casp %[t1], %H[t1], %[wdata], %H[wdata], [%[loc]]\n"
> +		"fmov d18, %[t2]\n"
> +		"fmov v18.D[1], %H[t2]\n"
> +		"casp %[t2], %H[t2], %[wdata], %H[wdata], [%[loc]]\n"
> +		"fmov d19, %[t3]\n"
> +		"fmov v19.D[1], %H[t3]\n"
> +		"casp %[t3], %H[t3], %[wdata], %H[wdata], [%[loc]]\n"
> +		"and %[failed].16B, %[failed].16B, v16.16B\n"
> +		"and %[failed].16B, %[failed].16B, v17.16B\n"
> +		"and %[failed].16B, %[failed].16B, v18.16B\n"
> +		"and %[failed].16B, %[failed].16B, v19.16B\n"
> +		"fmov d20, %[t4]\n"
> +		"fmov v20.D[1], %H[t4]\n"
> +		"fmov d21, %[t5]\n"
> +		"fmov v21.D[1], %H[t5]\n"
> +		"fmov d22, %[t6]\n"
> +		"fmov v22.D[1], %H[t6]\n"
> +		"fmov d23, %[t7]\n"
> +		"fmov v23.D[1], %H[t7]\n"
> +		"and %[failed].16B, %[failed].16B, v20.16B\n"
> +		"and %[failed].16B, %[failed].16B, v21.16B\n"
> +		"and %[failed].16B, %[failed].16B, v22.16B\n"
> +		"and %[failed].16B, %[failed].16B, v23.16B\n"
> +		"st1 { v16.2d, v17.2d, v18.2d, v19.2d}, [%[dst]], 64\n"
> +		"st1 { v20.2d, v21.2d, v22.2d, v23.2d}, [%[dst]], 64\n"
> +		"fmov d16, %[t8]\n"
> +		"fmov v16.D[1], %H[t8]\n"
> +		"fmov d17, %[t9]\n"
> +		"fmov v17.D[1], %H[t9]\n"
> +		"fmov d18, %[t10]\n"
> +		"fmov v18.D[1], %H[t10]\n"
> +		"fmov d19, %[t11]\n"
> +		"fmov v19.D[1], %H[t11]\n"
> +		"and %[failed].16B, %[failed].16B, v16.16B\n"
> +		"and %[failed].16B, %[failed].16B, v17.16B\n"
> +		"and %[failed].16B, %[failed].16B, v18.16B\n"
> +		"and %[failed].16B, %[failed].16B, v19.16B\n"
> +		"fmov d20, %[t0]\n"
> +		"fmov v20.D[1], %H[t0]\n"
> +		"fmov d21, %[t1]\n"
> +		"fmov v21.D[1], %H[t1]\n"
> +		"fmov d22, %[t2]\n"
> +		"fmov v22.D[1], %H[t2]\n"
> +		"fmov d23, %[t3]\n"
> +		"fmov v23.D[1], %H[t3]\n"
> +		"and %[failed].16B, %[failed].16B, v20.16B\n"
> +		"and %[failed].16B, %[failed].16B, v21.16B\n"
> +		"and %[failed].16B, %[failed].16B, v22.16B\n"
> +		"and %[failed].16B, %[failed].16B, v23.16B\n"
> +		"st1 { v16.2d, v17.2d, v18.2d, v19.2d}, [%[dst]], 64\n"
> +		"st1 { v20.2d, v21.2d, v22.2d, v23.2d}, [%[dst]], 64\n"
> +		: "+Q" (*addr), [failed] "=&w" (failed),
> +		[t0] "=&r" (t0), [t1] "=&r" (t1), [t2] "=&r" (t2),
> +		[t3] "=&r" (t3), [t4] "=&r" (t4), [t5] "=&r" (t5),
> +		[t6] "=&r" (t6), [t7] "=&r" (t7), [t8] "=&r" (t8),
> +		[t9] "=&r" (t9), [t10] "=&r" (t10), [t11] "=&r" (t11)
> +		: [wdata] "r" (wdata128), [dst] "r" (obj_table),
> +		[loc] "r" (addr)
> +		: "memory", "v16", "v17", "v18",
> +		"v19", "v20", "v21", "v22", "v23"
> +		);
> +		break;
> +	}
> +	case 16:
> +	{
> +		__uint128_t t0, t1, t2, t3, t4, t5, t6, t7;
> +
> +		asm volatile (
> +		".cpu  generic+lse\n"
> +		"casp %[t0], %H[t0], %[wdata], %H[wdata], [%[loc]]\n"
> +		"casp %[t1], %H[t1], %[wdata], %H[wdata], [%[loc]]\n"
> +		"casp %[t2], %H[t2], %[wdata], %H[wdata], [%[loc]]\n"
> +		"casp %[t3], %H[t3], %[wdata], %H[wdata], [%[loc]]\n"
> +		"casp %[t4], %H[t4], %[wdata], %H[wdata], [%[loc]]\n"
> +		"casp %[t5], %H[t5], %[wdata], %H[wdata], [%[loc]]\n"
> +		"casp %[t6], %H[t6], %[wdata], %H[wdata], [%[loc]]\n"
> +		"casp %[t7], %H[t7], %[wdata], %H[wdata], [%[loc]]\n"
> +		"fmov d16, %[t0]\n"
> +		"fmov v16.D[1], %H[t0]\n"
> +		"fmov d17, %[t1]\n"
> +		"fmov v17.D[1], %H[t1]\n"
> +		"fmov d18, %[t2]\n"
> +		"fmov v18.D[1], %H[t2]\n"
> +		"fmov d19, %[t3]\n"
> +		"fmov v19.D[1], %H[t3]\n"
> +		"and %[failed].16B, %[failed].16B, v16.16B\n"
> +		"and %[failed].16B, %[failed].16B, v17.16B\n"
> +		"and %[failed].16B, %[failed].16B, v18.16B\n"
> +		"and %[failed].16B, %[failed].16B, v19.16B\n"
> +		"fmov d20, %[t4]\n"
> +		"fmov v20.D[1], %H[t4]\n"
> +		"fmov d21, %[t5]\n"
> +		"fmov v21.D[1], %H[t5]\n"
> +		"fmov d22, %[t6]\n"
> +		"fmov v22.D[1], %H[t6]\n"
> +		"fmov d23, %[t7]\n"
> +		"fmov v23.D[1], %H[t7]\n"
> +		"and %[failed].16B, %[failed].16B, v20.16B\n"
> +		"and %[failed].16B, %[failed].16B, v21.16B\n"
> +		"and %[failed].16B, %[failed].16B, v22.16B\n"
> +		"and %[failed].16B, %[failed].16B, v23.16B\n"
> +		"st1 { v16.2d, v17.2d, v18.2d, v19.2d}, [%[dst]], 64\n"
> +		"st1 { v20.2d, v21.2d, v22.2d, v23.2d}, [%[dst]], 64\n"
> +		: "+Q" (*addr), [failed] "=&w" (failed),
> +		[t0] "=&r" (t0), [t1] "=&r" (t1), [t2] "=&r" (t2),
> +		[t3] "=&r" (t3), [t4] "=&r" (t4), [t5] "=&r" (t5),
> +		[t6] "=&r" (t6), [t7] "=&r" (t7)
> +		: [wdata] "r" (wdata128), [dst] "r" (obj_table),
> +		[loc] "r" (addr)
> +		: "memory", "v16", "v17", "v18", "v19",
> +		  "v20", "v21", "v22", "v23"
> +		);
> +		break;
> +	}
> +	case 8:
> +	{
> +		__uint128_t t0, t1, t2, t3;
> +
> +		asm volatile (
> +		".cpu  generic+lse\n"
> +		"casp %[t0], %H[t0], %[wdata], %H[wdata], [%[loc]]\n"
> +		"casp %[t1], %H[t1], %[wdata], %H[wdata], [%[loc]]\n"
> +		"casp %[t2], %H[t2], %[wdata], %H[wdata], [%[loc]]\n"
> +		"casp %[t3], %H[t3], %[wdata], %H[wdata], [%[loc]]\n"
> +		"fmov d16, %[t0]\n"
> +		"fmov v16.D[1], %H[t0]\n"
> +		"fmov d17, %[t1]\n"
> +		"fmov v17.D[1], %H[t1]\n"
> +		"fmov d18, %[t2]\n"
> +		"fmov v18.D[1], %H[t2]\n"
> +		"fmov d19, %[t3]\n"
> +		"fmov v19.D[1], %H[t3]\n"
> +		"and %[failed].16B, %[failed].16B, v16.16B\n"
> +		"and %[failed].16B, %[failed].16B, v17.16B\n"
> +		"and %[failed].16B, %[failed].16B, v18.16B\n"
> +		"and %[failed].16B, %[failed].16B, v19.16B\n"
> +		"st1 { v16.2d, v17.2d, v18.2d, v19.2d}, [%[dst]], 64\n"
> +		: "+Q" (*addr), [failed] "=&w" (failed),
> +		[t0] "=&r" (t0), [t1] "=&r" (t1), [t2] "=&r" (t2),
> +		[t3] "=&r" (t3)
> +		: [wdata] "r" (wdata128), [dst] "r" (obj_table),
> +		[loc] "r" (addr)
> +		: "memory", "v16", "v17", "v18", "v19"
> +		);
> +		break;
> +	}
> +	case 4:
> +	{
> +		__uint128_t t0, t1;
> +
> +		asm volatile (
> +		".cpu  generic+lse\n"
> +		"casp %[t0], %H[t0], %[wdata], %H[wdata], [%[loc]]\n"
> +		"casp %[t1], %H[t1], %[wdata], %H[wdata], [%[loc]]\n"
> +		"fmov d16, %[t0]\n"
> +		"fmov v16.D[1], %H[t0]\n"
> +		"fmov d17, %[t1]\n"
> +		"fmov v17.D[1], %H[t1]\n"
> +		"and %[failed].16B, %[failed].16B, v16.16B\n"
> +		"and %[failed].16B, %[failed].16B, v17.16B\n"
> +		"st1 { v16.2d, v17.2d}, [%[dst]], 32\n"
> +		: "+Q" (*addr), [failed] "=&w" (failed),
> +		[t0] "=&r" (t0), [t1] "=&r" (t1)
> +		: [wdata] "r" (wdata128), [dst] "r" (obj_table),
> +		[loc] "r" (addr)
> +		: "memory", "v16", "v17"
> +		);
> +		break;
> +	}
> +	case 2:
> +	{
> +		__uint128_t t0;
> +
> +		asm volatile (
> +		".cpu  generic+lse\n"
> +		"casp %[t0], %H[t0], %[wdata], %H[wdata], [%[loc]]\n"
> +		"fmov d16, %[t0]\n"
> +		"fmov v16.D[1], %H[t0]\n"
> +		"and %[failed].16B, %[failed].16B, v16.16B\n"
> +		"st1 { v16.2d}, [%[dst]], 16\n"
> +		: "+Q" (*addr), [failed] "=&w" (failed),
> +		[t0] "=&r" (t0)
> +		: [wdata] "r" (wdata128), [dst] "r" (obj_table),
> +		[loc] "r" (addr)
> +		: "memory", "v16"
> +		);
> +		break;
> +	}
> +	case 1:
> +		return npa_lf_aura_op_alloc_one(wdata, addr, obj_table, 0);
> +	}
> +
> +	if (unlikely(!(((uint64_t *) &failed)[0] & ((uint64_t *) &failed)[1])))
> +		return npa_lf_aura_op_search_alloc(wdata, addr, (void **)
> +			((char *)obj_table - (sizeof(uint64_t) * n)), n);

I think this is causing an error for some arm64 builds with the
following warning;

../drivers/mempool/octeontx2/otx2_mempool_ops.c: In function ‘npa_lf_aura_op_alloc_bulk’:
../drivers/mempool/octeontx2/otx2_mempool_ops.c:281:2: error: dereferencing type-punned pointer will break strict-aliasing rules [-Werror=strict-aliasing]
  if (unlikely(!(((uint64_t *) &failed)[0] & ((uint64_t *) &failed)[1])))
  ^

This is only tested with gcc, though.

See example travis build here:

https://travis-ci.com/ovsrobot/dpdk/builds/112894377

Thanks!

> +
> +	return 0;
> +}
> +
> +static __rte_noinline void
> +otx2_npa_clear_alloc(struct rte_mempool *mp, void **obj_table, unsigned int n)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < n; i++) {
> +		if (obj_table[i] != NULL) {
> +			otx2_npa_enq(mp, &obj_table[i], 1);
> +			obj_table[i] = NULL;
> +		}
> +	}
> +}
> +
> +static inline int __hot
> +otx2_npa_deq_arm64(struct rte_mempool *mp, void **obj_table, unsigned int n)
> +{
> +	const int64_t wdata = npa_lf_aura_handle_to_aura(mp->pool_id);
> +	void **obj_table_bak = obj_table;
> +	const unsigned int nfree = n;
> +	unsigned int parts;
> +
> +	int64_t * const addr = (int64_t * const)
> +			(npa_lf_aura_handle_to_base(mp->pool_id) +
> +				NPA_LF_AURA_OP_ALLOCX(0));
> +	while (n) {
> +		parts = n > 31 ? 32 : rte_align32prevpow2(n);
> +		n -= parts;
> +		if (unlikely(npa_lf_aura_op_alloc_bulk(wdata, addr,
> +				parts, obj_table))) {
> +			otx2_npa_clear_alloc(mp, obj_table_bak, nfree - n);
> +			return -ENOENT;
> +		}
> +		obj_table += parts;
> +	}
> +
> +	return 0;
> +}
> +#endif
> +
>  static inline int __hot
>  otx2_npa_deq(struct rte_mempool *mp, void **obj_table, unsigned int n)
>  {
> @@ -463,7 +750,11 @@ static struct rte_mempool_ops otx2_npa_ops = {
>  	.get_count = otx2_npa_get_count,
>  	.calc_mem_size = otx2_npa_calc_mem_size,
>  	.populate = otx2_npa_populate,
> +#if defined(RTE_ARCH_ARM64)
> +	.dequeue = otx2_npa_deq_arm64,
> +#else
>  	.dequeue = otx2_npa_deq,
> +#endif
>  };
>  
>  MEMPOOL_REGISTER_OPS(otx2_npa_ops);

  reply index

Thread overview: 122+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-23  8:13 [dpdk-dev] [PATCH v1 00/27] OCTEON TX2 common and mempool driver jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 01/27] common/octeontx2: add build infrastructure and HW definition jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 02/27] common/octeontx2: add IO handling APIs jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 03/27] common/octeontx2: add mbox request and response definition jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 04/27] common/octeontx2: add mailbox base support infra jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 05/27] common/octeontx2: add runtime log infra jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 06/27] common/octeontx2: add mailbox send and receive support jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 07/27] common/octeontx2: introduce common device class jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 08/27] common/octeontx2: introduce irq handling functions jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 09/27] common/octeontx2: handle intra device operations jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 10/27] common/octeontx2: add AF to PF mailbox IRQ and msg handlers jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 11/27] common/octeontx2: add PF to VF " jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 12/27] common/octeontx2: add VF mailbox IRQ and msg handler jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 13/27] common/octeontx2: add uplink message support jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 14/27] common/octeontx2: add FLR IRQ handler jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 15/27] doc: add Marvell OCTEON TX2 platform guide jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 16/27] mempool/octeontx2: add build infra and device probe jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 17/27] drivers: add init and fini on octeontx2 NPA object jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 18/27] mempool/octeontx2: add NPA HW operations jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 19/27] mempool/octeontx2: add NPA IRQ handler jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 20/27] mempool/octeontx2: add context dump support jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 21/27] mempool/octeontx2: add mempool alloc op jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 22/27] mempool/octeontx2: add mempool free op jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 23/27] mempool/octeontx2: add remaining slow path ops jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 24/27] mempool/octeontx2: add fast path mempool ops jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 25/27] mempool/octeontx2: add optimized dequeue operation for arm64 jerinj
2019-05-24 13:32   ` Aaron Conole [this message]
2019-05-27  9:20     ` Jerin Jacob Kollanukkaran
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 26/27] mempool/octeontx2: add devargs for max pool selection jerinj
2019-05-23  8:13 ` [dpdk-dev] [PATCH v1 27/27] doc: add Marvell OCTEON TX2 mempool documentation jerinj
2019-06-01  1:48 ` [dpdk-dev] [PATCH v2 00/27] OCTEON TX2 common and mempool driver jerinj
2019-06-01  1:48   ` [dpdk-dev] [PATCH v2 01/27] common/octeontx2: add build infrastructure and HW definition jerinj
2019-06-01  1:48   ` [dpdk-dev] [PATCH v2 02/27] common/octeontx2: add IO handling APIs jerinj
2019-06-01  1:48   ` [dpdk-dev] [PATCH v2 03/27] common/octeontx2: add mbox request and response definition jerinj
2019-06-01  1:48   ` [dpdk-dev] [PATCH v2 04/27] common/octeontx2: add mailbox base support infra jerinj
2019-06-01  1:48   ` [dpdk-dev] [PATCH v2 05/27] common/octeontx2: add runtime log infra jerinj
2019-06-01  1:48   ` [dpdk-dev] [PATCH v2 06/27] common/octeontx2: add mailbox send and receive support jerinj
2019-06-01  1:48   ` [dpdk-dev] [PATCH v2 07/27] common/octeontx2: introduce common device class jerinj
2019-06-01  1:48   ` [dpdk-dev] [PATCH v2 08/27] common/octeontx2: introduce irq handling functions jerinj
2019-06-01  1:48   ` [dpdk-dev] [PATCH v2 09/27] common/octeontx2: handle intra device operations jerinj
2019-06-01  1:48   ` [dpdk-dev] [PATCH v2 10/27] common/octeontx2: add AF to PF mailbox IRQ and msg handlers jerinj
2019-06-01  1:48   ` [dpdk-dev] [PATCH v2 11/27] common/octeontx2: add PF to VF " jerinj
2019-06-01  1:48   ` [dpdk-dev] [PATCH v2 12/27] common/octeontx2: add VF mailbox IRQ and msg handler jerinj
2019-06-01  1:48   ` [dpdk-dev] [PATCH v2 13/27] common/octeontx2: add uplink message support jerinj
2019-06-01  1:48   ` [dpdk-dev] [PATCH v2 14/27] common/octeontx2: add FLR IRQ handler jerinj
2019-06-01  1:48   ` [dpdk-dev] [PATCH v2 15/27] doc: add Marvell OCTEON TX2 platform guide jerinj
2019-06-01  1:48   ` [dpdk-dev] [PATCH v2 16/27] mempool/octeontx2: add build infra and device probe jerinj
2019-06-01  1:48   ` [dpdk-dev] [PATCH v2 17/27] drivers: add init and fini on octeontx2 NPA object jerinj
2019-06-01  1:48   ` [dpdk-dev] [PATCH v2 18/27] mempool/octeontx2: add NPA HW operations jerinj
2019-06-01  1:48   ` [dpdk-dev] [PATCH v2 19/27] mempool/octeontx2: add NPA IRQ handler jerinj
2019-06-01  1:48   ` [dpdk-dev] [PATCH v2 20/27] mempool/octeontx2: add context dump support jerinj
2019-06-01  1:48   ` [dpdk-dev] [PATCH v2 21/27] mempool/octeontx2: add mempool alloc op jerinj
2019-06-01  1:49   ` [dpdk-dev] [PATCH v2 22/27] mempool/octeontx2: add mempool free op jerinj
2019-06-01  1:49   ` [dpdk-dev] [PATCH v2 23/27] mempool/octeontx2: add remaining slow path ops jerinj
2019-06-01  1:49   ` [dpdk-dev] [PATCH v2 24/27] mempool/octeontx2: add fast path mempool ops jerinj
2019-06-01  1:49   ` [dpdk-dev] [PATCH v2 25/27] mempool/octeontx2: add optimized dequeue operation for arm64 jerinj
2019-06-01  1:49   ` [dpdk-dev] [PATCH v2 26/27] mempool/octeontx2: add devargs for max pool selection jerinj
2019-06-01  1:49   ` [dpdk-dev] [PATCH v2 27/27] doc: add Marvell OCTEON TX2 mempool documentation jerinj
2019-06-17 15:55   ` [dpdk-dev] [PATCH v3 00/27] OCTEON TX2 common and mempool driver jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 01/27] common/octeontx2: add build infrastructure and HW definition jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 02/27] common/octeontx2: add IO handling APIs jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 03/27] common/octeontx2: add mbox request and response definition jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 04/27] common/octeontx2: add mailbox base support infra jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 05/27] common/octeontx2: add runtime log infra jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 06/27] common/octeontx2: add mailbox send and receive support jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 07/27] common/octeontx2: introduce common device class jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 08/27] common/octeontx2: introduce irq handling functions jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 09/27] common/octeontx2: handle intra device operations jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 10/27] common/octeontx2: add AF to PF mailbox IRQ and msg handlers jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 11/27] common/octeontx2: add PF to VF " jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 12/27] common/octeontx2: add VF mailbox IRQ and msg handler jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 13/27] common/octeontx2: add uplink message support jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 14/27] common/octeontx2: add FLR IRQ handler jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 15/27] doc: add Marvell OCTEON TX2 platform guide jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 16/27] mempool/octeontx2: add build infra and device probe jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 17/27] drivers: add init and fini on octeontx2 NPA object jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 18/27] mempool/octeontx2: add NPA HW operations jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 19/27] mempool/octeontx2: add NPA IRQ handler jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 20/27] mempool/octeontx2: add context dump support jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 21/27] mempool/octeontx2: add mempool alloc op jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 22/27] mempool/octeontx2: add mempool free op jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 23/27] mempool/octeontx2: add remaining slow path ops jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 24/27] mempool/octeontx2: add fast path mempool ops jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 25/27] mempool/octeontx2: add optimized dequeue operation for arm64 jerinj
2019-06-17 21:25       ` Aaron Conole
2019-06-18  7:39         ` [dpdk-dev] [EXT] " Pavan Nikhilesh Bhagavatula
2019-06-21 19:26           ` Aaron Conole
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 26/27] mempool/octeontx2: add devargs for max pool selection jerinj
2019-06-17 15:55     ` [dpdk-dev] [PATCH v3 27/27] doc: add Marvell OCTEON TX2 mempool documentation jerinj
2019-06-20  8:39     ` [dpdk-dev] [PATCH v3 00/27] OCTEON TX2 common and mempool driver Jerin Jacob Kollanukkaran
2019-06-22 13:23     ` [dpdk-dev] [PATCH v4 " jerinj
2019-06-22 13:23       ` [dpdk-dev] [PATCH v4 01/27] common/octeontx2: add build infrastructure and HW definition jerinj
2019-06-22 13:23       ` [dpdk-dev] [PATCH v4 02/27] common/octeontx2: add IO handling APIs jerinj
2019-06-22 13:23       ` [dpdk-dev] [PATCH v4 03/27] common/octeontx2: add mbox request and response definition jerinj
2019-06-22 13:23       ` [dpdk-dev] [PATCH v4 04/27] common/octeontx2: add mailbox base support infra jerinj
2019-06-22 13:23       ` [dpdk-dev] [PATCH v4 05/27] common/octeontx2: add runtime log infra jerinj
2019-06-22 13:23       ` [dpdk-dev] [PATCH v4 06/27] common/octeontx2: add mailbox send and receive support jerinj
2019-06-22 13:23       ` [dpdk-dev] [PATCH v4 07/27] common/octeontx2: introduce common device class jerinj
2019-06-22 13:23       ` [dpdk-dev] [PATCH v4 08/27] common/octeontx2: introduce irq handling functions jerinj
2019-06-22 13:23       ` [dpdk-dev] [PATCH v4 09/27] common/octeontx2: handle intra device operations jerinj
2019-06-22 13:24       ` [dpdk-dev] [PATCH v4 10/27] common/octeontx2: add AF to PF mailbox IRQ and msg handlers jerinj
2019-06-22 13:24       ` [dpdk-dev] [PATCH v4 11/27] common/octeontx2: add PF to VF " jerinj
2019-06-22 13:24       ` [dpdk-dev] [PATCH v4 12/27] common/octeontx2: add VF mailbox IRQ and msg handler jerinj
2019-06-22 13:24       ` [dpdk-dev] [PATCH v4 13/27] common/octeontx2: add uplink message support jerinj
2019-06-22 13:24       ` [dpdk-dev] [PATCH v4 14/27] common/octeontx2: add FLR IRQ handler jerinj
2019-06-22 13:24       ` [dpdk-dev] [PATCH v4 15/27] doc: add Marvell OCTEON TX2 platform guide jerinj
2019-06-22 13:24       ` [dpdk-dev] [PATCH v4 16/27] mempool/octeontx2: add build infra and device probe jerinj
2019-06-22 13:24       ` [dpdk-dev] [PATCH v4 17/27] drivers: add init and fini on octeontx2 NPA object jerinj
2019-06-22 13:24       ` [dpdk-dev] [PATCH v4 18/27] mempool/octeontx2: add NPA HW operations jerinj
2019-06-22 13:24       ` [dpdk-dev] [PATCH v4 19/27] mempool/octeontx2: add NPA IRQ handler jerinj
2019-06-22 13:24       ` [dpdk-dev] [PATCH v4 20/27] mempool/octeontx2: add context dump support jerinj
2019-06-22 13:24       ` [dpdk-dev] [PATCH v4 21/27] mempool/octeontx2: add mempool alloc op jerinj
2019-06-22 13:24       ` [dpdk-dev] [PATCH v4 22/27] mempool/octeontx2: add mempool free op jerinj
2019-06-22 13:24       ` [dpdk-dev] [PATCH v4 23/27] mempool/octeontx2: add remaining slow path ops jerinj
2019-06-22 13:24       ` [dpdk-dev] [PATCH v4 24/27] mempool/octeontx2: add fast path mempool ops jerinj
2019-06-22 13:24       ` [dpdk-dev] [PATCH v4 25/27] mempool/octeontx2: add optimized dequeue operation for arm64 jerinj
2019-06-22 13:24       ` [dpdk-dev] [PATCH v4 26/27] mempool/octeontx2: add devargs for max pool selection jerinj
2019-06-22 13:24       ` [dpdk-dev] [PATCH v4 27/27] doc: add Marvell OCTEON TX2 mempool documentation jerinj
2019-06-25 21:25         ` Thomas Monjalon
2019-06-25 21:39       ` [dpdk-dev] [PATCH v4 00/27] OCTEON TX2 common and mempool driver Thomas Monjalon
2019-06-26 23:10         ` Stephen Hemminger
2019-06-26 13:14       ` Ferruh Yigit

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f7t8suw0ygz.fsf@dhcp-25.97.bos.redhat.com \
    --to=aconole@redhat.com \
    --cc=dev@dpdk.org \
    --cc=jerinj@marvell.com \
    --cc=olivier.matz@6wind.com \
    --cc=pbhagavatula@marvell.com \
    --cc=thomas@monjalon.net \
    --cc=vattunuru@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK-dev Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dpdk-dev/0 dpdk-dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dpdk-dev dpdk-dev/ https://lore.kernel.org/dpdk-dev \
		dev@dpdk.org dpdk-dev@archiver.kernel.org
	public-inbox-index dpdk-dev

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox