Re: [RFC v3 1/8] dt-bindings: display: convert ingenic, lcd.txt to ingenic, lcd.yaml

From: "H. Nikolaus Schaller" <hns@goldelico.com>
To: Paul Cercueil <paul@crapouillou.net>
Cc: "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>, Paul Boddie <paul@boddie.org.uk>,
	Kees Cook <keescook@chromium.org>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	David Airlie <airlied@linux.ie>,
	MIPS Creator CI20 Development
	<mips-creator-ci20-dev@googlegroups.com>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	"open list:DRM PANEL DRIVERS" <dri-devel@lists.freedesktop.org>,
	linux-mips@vger.kernel.org,
	"open list:GPIO SUBSYSTEM" <linux-gpio@vger.kernel.org>,
	Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
	"Eric W. Biederman" <ebiederm@xmission.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Discussions about the Letux Kernel <letux-kernel@openphoenux.org>
Subject: Re: [RFC v3 1/8] dt-bindings: display: convert ingenic, lcd.txt to ingenic, lcd.yaml
Date: Mon, 30 Mar 2020 18:33:10 +0200	[thread overview]
Message-ID: <02E5EC5D-1FBB-45E4-907E-10450B449726@goldelico.com> (raw)
In-Reply-To: <20200330154202.GA23233@bogus>

Hi Paul,

> Am 30.03.2020 um 17:42 schrieb Rob Herring <robh@kernel.org>:
> 
> On Sun, 29 Mar 2020 19:35:47 +0200, "H. Nikolaus Schaller" wrote:
>> and add compatible: jz4780-lcd, including an example how to
>> configure both lcd controllers.
>> 
>> Also fix the clock names and examples.
>> 
>> Based on work by Paul Cercueil <paul@crapouillou.net> and
>> Sam Ravnborg <sam@ravnborg.org>
>> 
>> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
>> Cc: Rob Herring <robh@kernel.org>
>> Cc: devicetree@vger.kernel.org
>> ---
>> .../bindings/display/ingenic,lcd.txt          |  45 ------
>> .../bindings/display/ingenic,lcd.yaml         | 128 ++++++++++++++++++
>> 2 files changed, 128 insertions(+), 45 deletions(-)
>> delete mode 100644 Documentation/devicetree/bindings/display/ingenic,lcd.txt
>> create mode 100644 Documentation/devicetree/bindings/display/ingenic,lcd.yaml
>> 
> 
> My bot found errors running 'make dt_binding_check' on your patch:
> 
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/ingenic,lcd.example.dt.yaml: lcd-controller@13050000: clocks: [[4294967295, 9]] is too short
> 
> See https://patchwork.ozlabs.org/patch/1263508

If I read the message correctly, I think there should be 2 clocks specified in
the jz4725b-lcd example and not just

	clocks = <&cgu JZ4725B_CLK_LCD>;

Unfortunately the jz4725b.dtsi does not seem to be upstream or in linux-next so
I don't know if it works without lcd_pclk or not.

If there is really just one clock, we need to modify the clocks and clock-names
schema and add minItems: 1 and maxItems: 2 to allow for this flexibility.

Otherwise we have to fix the example. Do you have some git with an up-to-date
jz4725b.dtsi to look at?

> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure dt-schema is up to date:
> 
> pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

+++ :)

> 
> Please check and re-submit.

Sure, since it is a RFC.

BR and thanks,
Nikolaus

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel