dri-devel Archive on lore.kernel.org
 help / color / Atom feed
From: Rajendra Nayak <rnayak@codeaurora.org>
To: robdclark@gmail.com, sean@poorly.run, agross@kernel.org,
	bjorn.andersson@linaro.org
Cc: devicetree@vger.kernel.org,
	Rajendra Nayak <rnayak@codeaurora.org>,
	linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	dri-devel@lists.freedesktop.org, mka@chromium.org
Subject: [PATCH v3 2/4] drm/msm: dsi: Use OPP API to set clk/perf state
Date: Thu,  9 Jul 2020 16:34:32 +0530
Message-ID: <1594292674-15632-3-git-send-email-rnayak@codeaurora.org> (raw)
In-Reply-To: <1594292674-15632-1-git-send-email-rnayak@codeaurora.org>

On SDM845 and SC7180 DSI needs to express a performance state
requirement on a power domain depending on the clock rates.
Use OPP table from DT to register with OPP framework and use
dev_pm_opp_set_rate() to set the clk/perf state.

dev_pm_opp_set_rate() is designed to be equivalent to clk_set_rate()
for devices without an OPP table, hence the change works fine
on devices/platforms which only need to set a clock rate.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 27 +++++++++++++++++++++++++--
 1 file changed, 25 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 11ae5b8..0a14c4a 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -14,6 +14,7 @@
 #include <linux/of_graph.h>
 #include <linux/of_irq.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/pm_opp.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/spinlock.h>
@@ -111,6 +112,9 @@ struct msm_dsi_host {
 	struct clk *pixel_clk_src;
 	struct clk *byte_intf_clk;
 
+	struct opp_table *opp_table;
+	bool has_opp_table;
+
 	u32 byte_clk_rate;
 	u32 pixel_clk_rate;
 	u32 esc_clk_rate;
@@ -512,9 +516,10 @@ int dsi_link_clk_set_rate_6g(struct msm_dsi_host *msm_host)
 	DBG("Set clk rates: pclk=%d, byteclk=%d",
 		msm_host->mode->clock, msm_host->byte_clk_rate);
 
-	ret = clk_set_rate(msm_host->byte_clk, msm_host->byte_clk_rate);
+	ret = dev_pm_opp_set_rate(&msm_host->pdev->dev,
+				  msm_host->byte_clk_rate);
 	if (ret) {
-		pr_err("%s: Failed to set rate byte clk, %d\n", __func__, ret);
+		pr_err("%s: dev_pm_opp_set_rate failed %d\n", __func__, ret);
 		return ret;
 	}
 
@@ -658,6 +663,8 @@ int dsi_link_clk_enable_v2(struct msm_dsi_host *msm_host)
 
 void dsi_link_clk_disable_6g(struct msm_dsi_host *msm_host)
 {
+	/* Drop the performance state vote */
+	dev_pm_opp_set_rate(&msm_host->pdev->dev, 0);
 	clk_disable_unprepare(msm_host->esc_clk);
 	clk_disable_unprepare(msm_host->pixel_clk);
 	if (msm_host->byte_intf_clk)
@@ -1879,6 +1886,19 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)
 		goto fail;
 	}
 
+	msm_host->opp_table = dev_pm_opp_set_clkname(&pdev->dev, "byte");
+	if (IS_ERR(msm_host->opp_table))
+		return PTR_ERR(msm_host->opp_table);
+	/* OPP table is optional */
+	ret = dev_pm_opp_of_add_table(&pdev->dev);
+	if (!ret) {
+		msm_host->has_opp_table = true;
+	} else if (ret != -ENODEV) {
+		dev_err(&pdev->dev, "invalid OPP table in device tree\n");
+		dev_pm_opp_put_clkname(msm_host->opp_table);
+		return ret;
+	}
+
 	init_completion(&msm_host->dma_comp);
 	init_completion(&msm_host->video_comp);
 	mutex_init(&msm_host->dev_mutex);
@@ -1914,6 +1934,9 @@ void msm_dsi_host_destroy(struct mipi_dsi_host *host)
 	mutex_destroy(&msm_host->cmd_mutex);
 	mutex_destroy(&msm_host->dev_mutex);
 
+	if (msm_host->has_opp_table)
+		dev_pm_opp_of_remove_table(&msm_host->pdev->dev);
+	dev_pm_opp_put_clkname(msm_host->opp_table);
 	pm_runtime_disable(&msm_host->pdev->dev);
 }
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-09 11:04 [PATCH v3 0/4] DVFS support for dpu and dsi Rajendra Nayak
2020-07-09 11:04 ` [PATCH v3 1/4] drm/msm/dpu: Use OPP API to set clk/perf state Rajendra Nayak
2020-07-09 11:04 ` Rajendra Nayak [this message]
2020-07-09 11:04 ` [PATCH v3 3/4] arm64: dts: sdm845: Add DSI and MDP OPP tables and power-domains Rajendra Nayak
2020-07-17 17:47   ` Rob Clark
2020-07-09 11:04 ` [PATCH v3 4/4] arm64: dts: sc7180: " Rajendra Nayak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1594292674-15632-3-git-send-email-rnayak@codeaurora.org \
    --to=rnayak@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=robdclark@gmail.com \
    --cc=sean@poorly.run \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

dri-devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dri-devel/0 dri-devel/git/0.git
	git clone --mirror https://lore.kernel.org/dri-devel/1 dri-devel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dri-devel dri-devel/ https://lore.kernel.org/dri-devel \
		dri-devel@lists.freedesktop.org
	public-inbox-index dri-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.dri-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git