dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Eric Anholt <eric@anholt.net>
To: Florian Fainelli <f.fainelli@gmail.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	dri-devel@lists.freedesktop.org,
	Thierry Reding <thierry.reding@gmail.com>
Cc: linux-rpi-kernel@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Stephen Warren <swarren@wwwdotorg.org>,
	Lee Jones <lee@kernel.org>,
	bcm-kernel-feedback-list@broadcom.com, linux-clk@vger.kernel.org,
	Eric Anholt <eric@anholt.net>
Subject: [PATCH 05/11] drm/vc4: Add support for feeding DSI encoders from the pixel valve.
Date: Wed, 14 Dec 2016 11:46:15 -0800	[thread overview]
Message-ID: <20161214194621.16499-6-eric@anholt.net> (raw)
In-Reply-To: <20161214194621.16499-1-eric@anholt.net>

We have to set a different pixel format, which tells the hardware to
use the pix_width field that's fed in sideband from the DSI encoder to
divide the "pixel" clock.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 drivers/gpu/drm/vc4/vc4_crtc.c | 33 +++++++++++++++++++--------------
 drivers/gpu/drm/vc4/vc4_regs.h |  2 ++
 2 files changed, 21 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
index a0fd3e66bc4b..cd070e0c79a6 100644
--- a/drivers/gpu/drm/vc4/vc4_crtc.c
+++ b/drivers/gpu/drm/vc4/vc4_crtc.c
@@ -349,38 +349,40 @@ static u32 vc4_get_fifo_full_level(u32 format)
 }
 
 /*
- * Returns the clock select bit for the connector attached to the
- * CRTC.
+ * Returns the encoder attached to the CRTC.
+ *
+ * VC4 can only scan out to one encoder at a time, while the DRM core
+ * allows drivers to push pixels to more than one encoder from the
+ * same CRTC.
  */
-static int vc4_get_clock_select(struct drm_crtc *crtc)
+static struct drm_encoder *vc4_get_crtc_encoder(struct drm_crtc *crtc)
 {
 	struct drm_connector *connector;
 
 	drm_for_each_connector(connector, crtc->dev) {
 		if (connector->state->crtc == crtc) {
-			struct drm_encoder *encoder = connector->encoder;
-			struct vc4_encoder *vc4_encoder =
-				to_vc4_encoder(encoder);
-
-			return vc4_encoder->clock_select;
+			return connector->encoder;
 		}
 	}
 
-	return -1;
+	return NULL;
 }
 
 static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
 	struct vc4_dev *vc4 = to_vc4_dev(dev);
+	struct drm_encoder *encoder = vc4_get_crtc_encoder(crtc);
+	struct vc4_encoder *vc4_encoder = to_vc4_encoder(encoder);
 	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
 	struct drm_crtc_state *state = crtc->state;
 	struct drm_display_mode *mode = &state->adjusted_mode;
 	bool interlace = mode->flags & DRM_MODE_FLAG_INTERLACE;
 	u32 pixel_rep = (mode->flags & DRM_MODE_FLAG_DBLCLK) ? 2 : 1;
-	u32 format = PV_CONTROL_FORMAT_24;
+	bool is_dsi = (vc4_encoder->type == VC4_ENCODER_TYPE_DSI0 ||
+		       vc4_encoder->type == VC4_ENCODER_TYPE_DSI1);
+	u32 format = is_dsi ? PV_CONTROL_FORMAT_DSIV_24 : PV_CONTROL_FORMAT_24;
 	bool debug_dump_regs = false;
-	int clock_select = vc4_get_clock_select(crtc);
 
 	if (debug_dump_regs) {
 		DRM_INFO("CRTC %d regs before:\n", drm_crtc_index(crtc));
@@ -436,17 +438,19 @@ static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
 		 */
 		CRTC_WRITE(PV_V_CONTROL,
 			   PV_VCONTROL_CONTINUOUS |
+			   (is_dsi ? PV_VCONTROL_DSI : 0) |
 			   PV_VCONTROL_INTERLACE |
 			   VC4_SET_FIELD(mode->htotal * pixel_rep / 2,
 					 PV_VCONTROL_ODD_DELAY));
 		CRTC_WRITE(PV_VSYNCD_EVEN, 0);
 	} else {
-		CRTC_WRITE(PV_V_CONTROL, PV_VCONTROL_CONTINUOUS);
+		CRTC_WRITE(PV_V_CONTROL,
+			   PV_VCONTROL_CONTINUOUS |
+			   (is_dsi ? PV_VCONTROL_DSI : 0));
 	}
 
 	CRTC_WRITE(PV_HACT_ACT, mode->hdisplay * pixel_rep);
 
-
 	CRTC_WRITE(PV_CONTROL,
 		   VC4_SET_FIELD(format, PV_CONTROL_FORMAT) |
 		   VC4_SET_FIELD(vc4_get_fifo_full_level(format),
@@ -455,7 +459,8 @@ static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
 		   PV_CONTROL_CLR_AT_START |
 		   PV_CONTROL_TRIGGER_UNDERFLOW |
 		   PV_CONTROL_WAIT_HSTART |
-		   VC4_SET_FIELD(clock_select, PV_CONTROL_CLK_SELECT) |
+		   VC4_SET_FIELD(vc4_encoder->clock_select,
+				 PV_CONTROL_CLK_SELECT) |
 		   PV_CONTROL_FIFO_CLR |
 		   PV_CONTROL_EN);
 
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index b3b297fba709..385405a2df05 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -190,6 +190,8 @@
 # define PV_VCONTROL_ODD_DELAY_SHIFT		6
 # define PV_VCONTROL_ODD_FIRST			BIT(5)
 # define PV_VCONTROL_INTERLACE			BIT(4)
+# define PV_VCONTROL_DSI			BIT(3)
+# define PV_VCONTROL_COMMAND			BIT(2)
 # define PV_VCONTROL_CONTINUOUS			BIT(1)
 # define PV_VCONTROL_VIDEN			BIT(0)
 
-- 
2.11.0

  parent reply	other threads:[~2016-12-14 19:46 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-14 19:46 [PATCH 00/11] drm/vc4: DSI panel support + Raspberry Pi touchscreen Eric Anholt
2016-12-14 19:46 ` [PATCH 01/11] clk: bcm2835: Don't rate change PLLs on behalf of DSI PLL dividers Eric Anholt
2016-12-14 19:46 ` [PATCH 02/11] clk: bcm2835: Register the DSI0/DSI1 pixel clocks Eric Anholt
2016-12-21 23:14   ` Stephen Boyd
2016-12-22  1:23     ` Eric Anholt
2016-12-14 19:46 ` [PATCH 03/11] clk: bcm2835: Add leaf clock measurement support, disabled by default Eric Anholt
2016-12-14 19:46 ` [PATCH 04/11] drm/vc4: Set up SCALER_DISPCTRL at boot Eric Anholt
2017-01-31 19:35   ` Daniel Vetter
2016-12-14 19:46 ` Eric Anholt [this message]
2017-01-31 19:39   ` [PATCH 05/11] drm/vc4: Add support for feeding DSI encoders from the pixel valve Daniel Vetter
2017-01-31 19:54     ` Eric Anholt
2016-12-14 19:46 ` [PATCH 06/11] dt-bindings: Document the VC4 DSI module nodes Eric Anholt
2016-12-14 19:46 ` [PATCH 07/11] drm/vc4: Add DSI driver Eric Anholt
2017-01-31 19:51   ` Daniel Vetter
2016-12-14 19:46 ` [PATCH 08/11] dt-bindings: Document the Raspberry Pi Touchscreen nodes Eric Anholt
2016-12-14 19:46 ` [PATCH 09/11] drm/panel: Add support for the Raspberry Pi 7" Touchscreen Eric Anholt
2017-01-31 21:07   ` Thierry Reding
2017-01-31 21:17     ` Daniel Vetter
2017-01-31 21:42       ` Thierry Reding
2017-01-31 21:19     ` Daniel Vetter
2017-01-31 21:38       ` Thierry Reding
2016-12-14 19:46 ` [PATCH 10/11] ARM: bcm2835: dt: Add the DSI module nodes and clocks Eric Anholt
2016-12-14 19:46 ` [PATCH 11/11] ARM: bcm2835: Enable the Raspberry Pi touchscreen panel Eric Anholt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161214194621.16499-6-eric@anholt.net \
    --to=eric@anholt.net \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=f.fainelli@gmail.com \
    --cc=lee@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@codeaurora.org \
    --cc=swarren@wwwdotorg.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).