From mboxrd@z Thu Jan 1 00:00:00 1970 From: Douglas Anderson Subject: [PATCH v2 5/6] dt-bindings: drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1 Date: Thu, 25 Oct 2018 15:21:33 -0700 Message-ID: <20181025222134.174583-5-dianders@chromium.org> References: <20181025222134.174583-1-dianders@chromium.org> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20181025222134.174583-1-dianders@chromium.org> Sender: linux-kernel-owner@vger.kernel.org To: Sean Paul , Thierry Reding , Sandeep Panda Cc: linux-arm-msm@vger.kernel.org, Laurent Pinchart , jsanka@codeaurora.org, ryandcase@chromium.org, Douglas Anderson , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, Rob Herring , David Airlie , Mark Rutland List-Id: dri-devel@lists.freedesktop.org As far as I can tell the bindings that were added in commit 9c04400f7ea6 ("dt-bindings: drm/panel: Document Innolux TV123WAM panel bindings") weren't actually for Innolux TV123WAM but were actually for Innolux P120ZDG-BF1. As far as I can tell the Innolux TV123WAM isn't a real panel and but it's a mosh between the TI TV123WAM and the Innolux P120ZDG-BF1. Let's unmosh. Here's my evidence: * Searching for TV123WAM on the Internet turns up a TI panel. While it's possible that an Innolux panel has the same model number as the TI Panel, it seems a little doubtful. Looking up the datasheet from the TI Panel shows that it's 1920 x 1280 and 259.2 mm x 172.8 mm. * As far as I know, the patch adding the Innolux Panel was supposed to be for the board that's sitting in front of me as I type this (support for that board is not yet upstream). On the back of that panel I see Innolux P120ZDZ-EZ1 rev B1. * Someone pointed me at a datasheet that's supposed to be for the panel in front of me (sorry, I can't share the datasheet). That datasheet has the string "p120zdg-bf1" * If I search for "P120ZDG-BF1" on the Internet I get hits for panels that are 2160x1440. They don't have datasheets, but the fact that the resolution matches is a good sign. While we doing the rename, also mention that no-hpd can be used with this panel. See the previous patch in this series ("drm/panel: simple: Add "no-hpd" delay for Innolux TV123WAM"). Fixes: 9c04400f7ea6 ("dt-bindings: drm/panel: Document Innolux TV123WAM panel bindings") Signed-off-by: Douglas Anderson Reviewed-by: Rob Herring Cc: Sandeep Panda --- Changes in v2: None .../{innolux,tv123wam.txt => innolux,p120zdg-bf1.txt} | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) rename Documentation/devicetree/bindings/display/panel/{innolux,tv123wam.txt => innolux,p120zdg-bf1.txt} (70%) diff --git a/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt similarity index 70% rename from Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt rename to Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt index a9b35265fa13..513f03466aba 100644 --- a/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt +++ b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt @@ -1,20 +1,22 @@ -Innolux TV123WAM 12.3 inch eDP 2K display panel +Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel This binding is compatible with the simple-panel binding, which is specified in simple-panel.txt in this directory. Required properties: -- compatible: should be "innolux,tv123wam" +- compatible: should be "innolux,p120zdg-bf1" - power-supply: regulator to provide the supply voltage Optional properties: - enable-gpios: GPIO pin to enable or disable the panel - backlight: phandle of the backlight device attached to the panel +- no-hpd: If HPD isn't hooked up; add this property. Example: panel_edp: panel-edp { - compatible = "innolux,tv123wam"; + compatible = "innolux,p120zdg-bf1"; enable-gpios = <&msmgpio 31 GPIO_ACTIVE_LOW>; power-supply = <&pm8916_l2>; backlight = <&backlight>; + no-hpd; }; -- 2.19.1.568.g152ad8e336-goog