On Tue, Feb 05, 2019 at 09:49:17AM -0800, Vasily Khoruzhick wrote: > On Tue, Feb 5, 2019 at 7:42 AM Maxime Ripard wrote: > > > > On Mon, Feb 04, 2019 at 10:50:17AM -0800, Vasily Khoruzhick wrote: > > > On Mon, Feb 4, 2019 at 8:29 AM Icenowy Zheng wrote: > > > > >> IIRC, from the previous discussion, HDMI had a tolerancy requirement > > > > >> in the standard. Do you know if there's such a thing for eDP? That > > > > >> would solve the issue for all the eDP displays at once. > > > > > > > > > >I don't have access to eDP standard - vesa.org says it's available to > > > > >members only. > > > > > > > > Try out to grab an old version? > > > > > > > > I remember 1.0 is open. > > > > > > I can't find anything regarding dot clock tolerance in DisplayPort > > > specification. > > > > I guess since the DP is a VESA spec, it's probably .5%, just like on > > the EDID (well, CVT). > > Unfortunately that's not enough for Pinebook. It needs 1% for 768p > panel. And that mode is stored in the EDID as a standard (or established) timing, or a detailed timing? If the latter, then it should also provide the tolerancies as part of the panel timing description. If the former, then what would be the advertised pixel clock and the one we can compute? Maybe we have a bug somewhere. Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com