From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Mans Rullgard <mans@mansr.com>
Cc: David Airlie <airlied@linux.ie>, Chen-Yu Tsai <wens@csie.org>,
linux-arm-kernel@lists.infradead.org,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] drm/sun4i: hdmi: add support for ddc-i2c-bus property
Date: Mon, 11 Mar 2019 16:47:02 +0100 [thread overview]
Message-ID: <20190311154702.eslw5ccol44vxcmy@flea> (raw)
In-Reply-To: <20190311134713.25876-1-mans@mansr.com>
[-- Attachment #1.1: Type: text/plain, Size: 4222 bytes --]
Hi!
On Mon, Mar 11, 2019 at 01:47:13PM +0000, Mans Rullgard wrote:
> Sometimes it is desirabled to use a separate i2c controller for ddc
> access. This adds support for the ddc-i2c-bus property of the
> hdmi-connector node, using the specified controller if provided.
>
> Signed-off-by: Mans Rullgard <mans@mansr.com>
> ---
> drivers/gpu/drm/sun4i/sun4i_hdmi.h | 1 +
> drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 37 +++++++++++++++++++++++---
> 2 files changed, 35 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi.h b/drivers/gpu/drm/sun4i/sun4i_hdmi.h
> index b685ee11623d..b08c4453d47c 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_hdmi.h
> +++ b/drivers/gpu/drm/sun4i/sun4i_hdmi.h
> @@ -269,6 +269,7 @@ struct sun4i_hdmi {
> struct clk *tmds_clk;
>
> struct i2c_adapter *i2c;
> + struct i2c_adapter *ddc_i2c;
>
> /* Regmap fields for I2C adapter */
> struct regmap_field *field_ddc_en;
> diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
> index 061d2e0d9011..5b2fac79f5d6 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
> @@ -212,7 +212,7 @@ static int sun4i_hdmi_get_modes(struct drm_connector *connector)
> struct edid *edid;
> int ret;
>
> - edid = drm_get_edid(connector, hdmi->i2c);
> + edid = drm_get_edid(connector, hdmi->ddc_i2c ?: hdmi->i2c);
You can't test whether ddc_i2c is NULL or not...
> if (!edid)
> return 0;
>
> @@ -228,6 +228,28 @@ static int sun4i_hdmi_get_modes(struct drm_connector *connector)
> return ret;
> }
>
> +static struct i2c_adapter *sun4i_hdmi_get_ddc(struct device *dev)
> +{
> + struct device_node *phandle, *remote;
> + struct i2c_adapter *ddc;
> +
> + remote = of_graph_get_remote_node(dev->of_node, 1, -1);
> + if (!remote)
> + return ERR_PTR(-EINVAL);
> +
> + phandle = of_parse_phandle(remote, "ddc-i2c-bus", 0);
> + of_node_put(remote);
> + if (!phandle)
> + return NULL;
> +
> + ddc = of_get_i2c_adapter_by_node(phandle);
> + of_node_put(phandle);
> + if (!ddc)
> + return ERR_PTR(-EPROBE_DEFER);
> +
> + return ddc;
... Since even in (most) error cases you're returning a !NULL pointer.
> +}
> +
> static const struct drm_connector_helper_funcs sun4i_hdmi_connector_helper_funcs = {
> .get_modes = sun4i_hdmi_get_modes,
> };
> @@ -575,6 +597,12 @@ static int sun4i_hdmi_bind(struct device *dev, struct device *master,
> goto err_disable_mod_clk;
> }
>
> + hdmi->ddc_i2c = sun4i_hdmi_get_ddc(dev);
> + if (IS_ERR(hdmi->ddc_i2c)) {
> + ret = PTR_ERR(hdmi->ddc_i2c);
> + goto err_del_i2c_adapter;
> + }
> +
> drm_encoder_helper_add(&hdmi->encoder,
> &sun4i_hdmi_helper_funcs);
> ret = drm_encoder_init(drm,
> @@ -584,14 +612,14 @@ static int sun4i_hdmi_bind(struct device *dev, struct device *master,
> NULL);
> if (ret) {
> dev_err(dev, "Couldn't initialise the HDMI encoder\n");
> - goto err_del_i2c_adapter;
> + goto err_put_ddc_i2c;
> }
>
> hdmi->encoder.possible_crtcs = drm_of_find_possible_crtcs(drm,
> dev->of_node);
> if (!hdmi->encoder.possible_crtcs) {
> ret = -EPROBE_DEFER;
> - goto err_del_i2c_adapter;
> + goto err_put_ddc_i2c;
> }
>
> #ifdef CONFIG_DRM_SUN4I_HDMI_CEC
> @@ -630,6 +658,8 @@ static int sun4i_hdmi_bind(struct device *dev, struct device *master,
> err_cleanup_connector:
> cec_delete_adapter(hdmi->cec_adap);
> drm_encoder_cleanup(&hdmi->encoder);
> +err_put_ddc_i2c:
> + i2c_put_adapter(hdmi->ddc_i2c);
> err_del_i2c_adapter:
> i2c_del_adapter(hdmi->i2c);
> err_disable_mod_clk:
> @@ -650,6 +680,7 @@ static void sun4i_hdmi_unbind(struct device *dev, struct device *master,
> drm_connector_cleanup(&hdmi->connector);
> drm_encoder_cleanup(&hdmi->encoder);
> i2c_del_adapter(hdmi->i2c);
> + i2c_put_adapter(hdmi->ddc_i2c);
> clk_disable_unprepare(hdmi->mod_clk);
> clk_disable_unprepare(hdmi->bus_clk);
> }
> --
> 2.21.0
>
It looks good otherwise, thanks!
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2019-03-11 15:47 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-11 13:47 [PATCH] drm/sun4i: hdmi: add support for ddc-i2c-bus property Mans Rullgard
2019-03-11 15:47 ` Maxime Ripard [this message]
2019-03-11 16:11 ` Måns Rullgård
2019-03-14 15:41 ` Maxime Ripard
2019-03-14 16:09 ` Måns Rullgård
2019-03-18 15:50 ` Maxime Ripard
2019-03-18 16:23 ` Måns Rullgård
2019-03-19 12:34 ` Maxime Ripard
2019-03-19 12:48 ` Måns Rullgård
2019-03-21 15:44 ` Maxime Ripard
2019-03-21 18:00 ` Måns Rullgård
2019-03-26 19:49 ` Maxime Ripard
2019-03-28 13:02 ` Mans Rullgard
2019-04-01 11:58 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190311154702.eslw5ccol44vxcmy@flea \
--to=maxime.ripard@bootlin.com \
--cc=airlied@linux.ie \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mans@mansr.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).