dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
* [PATCH V4] drm/drm_vblank: Change EINVAL by the correct errno
@ 2019-06-19  2:07 Rodrigo Siqueira
  2019-06-19  7:48 ` Daniel Vetter
  0 siblings, 1 reply; 7+ messages in thread
From: Rodrigo Siqueira @ 2019-06-19  2:07 UTC (permalink / raw)
  To: Maarten Lankhorst, Maxime Ripard, Sean Paul, David Airlie, Daniel Vetter
  Cc: intel-gfx, kernel-janitors, linux-kernel, dri-devel

For historical reason, the function drm_wait_vblank_ioctl always return
-EINVAL if something gets wrong. This scenario limits the flexibility
for the userspace make detailed verification of the problem and take
some action. In particular, the validation of “if (!dev->irq_enabled)”
in the drm_wait_vblank_ioctl is responsible for checking if the driver
support vblank or not. If the driver does not support VBlank, the
function drm_wait_vblank_ioctl returns EINVAL which does not represent
the real issue; this patch changes this behavior by return EOPNOTSUPP.
Additionally, some operations are unsupported by this function, and
returns EINVAL; this patch also changes the return value to EOPNOTSUPP
in this case. Lastly, the function drm_wait_vblank_ioctl is invoked by
libdrm, which is used by many compositors; because of this, it is
important to check if this change breaks any compositor. In this sense,
the following projects were examined:

* Drm-hwcomposer
* Kwin
* Sway
* Wlroots
* Wayland-core
* Weston
* Xorg (67 different drivers)

For each repository the verification happened in three steps:

* Update the main branch
* Look for any occurrence "drmWaitVBlank" with the command:
  git grep -n "drmWaitVBlank"
* Look in the git history of the project with the command:
  git log -SdrmWaitVBlank

Finally, none of the above projects validate the use of EINVAL which
make safe, at least for these projects, to change the return values.

Change since V3:
 - Return EINVAL for _DRM_VBLANK_SIGNAL (Daniel)

Change since V2:
 Daniel Vetter and Chris Wilson
 - Replace ENOTTY by EOPNOTSUPP
 - Return EINVAL if the parameters are wrong

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
---
 drivers/gpu/drm/drm_vblank.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_vblank.c b/drivers/gpu/drm/drm_vblank.c
index 603ab105125d..bed233361614 100644
--- a/drivers/gpu/drm/drm_vblank.c
+++ b/drivers/gpu/drm/drm_vblank.c
@@ -1582,7 +1582,7 @@ int drm_wait_vblank_ioctl(struct drm_device *dev, void *data,
 	unsigned int flags, pipe, high_pipe;
 
 	if (!dev->irq_enabled)
-		return -EINVAL;
+		return -EOPNOTSUPP;
 
 	if (vblwait->request.type & _DRM_VBLANK_SIGNAL)
 		return -EINVAL;
-- 
2.21.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Re: [PATCH V4] drm/drm_vblank: Change EINVAL by the correct errno
  2019-06-19  2:07 [PATCH V4] drm/drm_vblank: Change EINVAL by the correct errno Rodrigo Siqueira
@ 2019-06-19  7:48 ` Daniel Vetter
  2019-06-19  7:50   ` Daniel Vetter
  0 siblings, 1 reply; 7+ messages in thread
From: Daniel Vetter @ 2019-06-19  7:48 UTC (permalink / raw)
  To: Rodrigo Siqueira
  Cc: Maxime Ripard, kernel-janitors, intel-gfx, linux-kernel,
	dri-devel, David Airlie

On Tue, Jun 18, 2019 at 11:07:50PM -0300, Rodrigo Siqueira wrote:
> For historical reason, the function drm_wait_vblank_ioctl always return
> -EINVAL if something gets wrong. This scenario limits the flexibility
> for the userspace make detailed verification of the problem and take
> some action. In particular, the validation of “if (!dev->irq_enabled)”
> in the drm_wait_vblank_ioctl is responsible for checking if the driver
> support vblank or not. If the driver does not support VBlank, the
> function drm_wait_vblank_ioctl returns EINVAL which does not represent
> the real issue; this patch changes this behavior by return EOPNOTSUPP.
> Additionally, some operations are unsupported by this function, and
> returns EINVAL; this patch also changes the return value to EOPNOTSUPP
> in this case. Lastly, the function drm_wait_vblank_ioctl is invoked by
> libdrm, which is used by many compositors; because of this, it is
> important to check if this change breaks any compositor. In this sense,
> the following projects were examined:
> 
> * Drm-hwcomposer
> * Kwin
> * Sway
> * Wlroots
> * Wayland-core
> * Weston
> * Xorg (67 different drivers)
> 
> For each repository the verification happened in three steps:
> 
> * Update the main branch
> * Look for any occurrence "drmWaitVBlank" with the command:
>   git grep -n "drmWaitVBlank"
> * Look in the git history of the project with the command:
>   git log -SdrmWaitVBlank
> 
> Finally, none of the above projects validate the use of EINVAL which
> make safe, at least for these projects, to change the return values.
> 
> Change since V3:
>  - Return EINVAL for _DRM_VBLANK_SIGNAL (Daniel)
> 
> Change since V2:
>  Daniel Vetter and Chris Wilson
>  - Replace ENOTTY by EOPNOTSUPP
>  - Return EINVAL if the parameters are wrong
> 

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Apologies for the confusion on the last time around. btw if someone tells
you "r-b (or a-b) with these changes", then just apply the r-b/a-b tag
next time around. Otherwise people will re-review the same thing over and
over again.
-Daniel

> Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
> ---
>  drivers/gpu/drm/drm_vblank.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/drm_vblank.c b/drivers/gpu/drm/drm_vblank.c
> index 603ab105125d..bed233361614 100644
> --- a/drivers/gpu/drm/drm_vblank.c
> +++ b/drivers/gpu/drm/drm_vblank.c
> @@ -1582,7 +1582,7 @@ int drm_wait_vblank_ioctl(struct drm_device *dev, void *data,
>  	unsigned int flags, pipe, high_pipe;
>  
>  	if (!dev->irq_enabled)
> -		return -EINVAL;
> +		return -EOPNOTSUPP;
>  
>  	if (vblwait->request.type & _DRM_VBLANK_SIGNAL)
>  		return -EINVAL;
> -- 
> 2.21.0

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH V4] drm/drm_vblank: Change EINVAL by the correct errno
  2019-06-19  7:48 ` Daniel Vetter
@ 2019-06-19  7:50   ` Daniel Vetter
  2019-06-26  2:00     ` Rodrigo Siqueira
  0 siblings, 1 reply; 7+ messages in thread
From: Daniel Vetter @ 2019-06-19  7:50 UTC (permalink / raw)
  To: Rodrigo Siqueira, Maarten Lankhorst, Maxime Ripard, Sean Paul,
	David Airlie, dri-devel, linux-kernel, kernel-janitors,
	intel-gfx

On Wed, Jun 19, 2019 at 09:48:56AM +0200, Daniel Vetter wrote:
> On Tue, Jun 18, 2019 at 11:07:50PM -0300, Rodrigo Siqueira wrote:
> > For historical reason, the function drm_wait_vblank_ioctl always return
> > -EINVAL if something gets wrong. This scenario limits the flexibility
> > for the userspace make detailed verification of the problem and take
> > some action. In particular, the validation of “if (!dev->irq_enabled)”
> > in the drm_wait_vblank_ioctl is responsible for checking if the driver
> > support vblank or not. If the driver does not support VBlank, the
> > function drm_wait_vblank_ioctl returns EINVAL which does not represent
> > the real issue; this patch changes this behavior by return EOPNOTSUPP.
> > Additionally, some operations are unsupported by this function, and
> > returns EINVAL; this patch also changes the return value to EOPNOTSUPP
> > in this case. Lastly, the function drm_wait_vblank_ioctl is invoked by
> > libdrm, which is used by many compositors; because of this, it is
> > important to check if this change breaks any compositor. In this sense,
> > the following projects were examined:
> > 
> > * Drm-hwcomposer
> > * Kwin
> > * Sway
> > * Wlroots
> > * Wayland-core
> > * Weston
> > * Xorg (67 different drivers)
> > 
> > For each repository the verification happened in three steps:
> > 
> > * Update the main branch
> > * Look for any occurrence "drmWaitVBlank" with the command:
> >   git grep -n "drmWaitVBlank"
> > * Look in the git history of the project with the command:
> >   git log -SdrmWaitVBlank
> > 
> > Finally, none of the above projects validate the use of EINVAL which
> > make safe, at least for these projects, to change the return values.
> > 
> > Change since V3:
> >  - Return EINVAL for _DRM_VBLANK_SIGNAL (Daniel)
> > 
> > Change since V2:
> >  Daniel Vetter and Chris Wilson
> >  - Replace ENOTTY by EOPNOTSUPP
> >  - Return EINVAL if the parameters are wrong
> > 
> 
> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> 
> Apologies for the confusion on the last time around. btw if someone tells
> you "r-b (or a-b) with these changes", then just apply the r-b/a-b tag
> next time around. Otherwise people will re-review the same thing over and
> over again.

btw when resending patches it's good practice to add anyone who commented
on it (or who commented on the igt test for the same patch and other way
round) onto the explicit Cc: list of the patch. That way it's easier for
them to follow the patch evolution and do a quick r-b once they're happy.

If you don't do that then much bigger chances your patch gets ignored.
-Daniel
> 
> > Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
> > ---
> >  drivers/gpu/drm/drm_vblank.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/gpu/drm/drm_vblank.c b/drivers/gpu/drm/drm_vblank.c
> > index 603ab105125d..bed233361614 100644
> > --- a/drivers/gpu/drm/drm_vblank.c
> > +++ b/drivers/gpu/drm/drm_vblank.c
> > @@ -1582,7 +1582,7 @@ int drm_wait_vblank_ioctl(struct drm_device *dev, void *data,
> >  	unsigned int flags, pipe, high_pipe;
> >  
> >  	if (!dev->irq_enabled)
> > -		return -EINVAL;
> > +		return -EOPNOTSUPP;
> >  
> >  	if (vblwait->request.type & _DRM_VBLANK_SIGNAL)
> >  		return -EINVAL;
> > -- 
> > 2.21.0
> 
> -- 
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH V4] drm/drm_vblank: Change EINVAL by the correct errno
  2019-06-19  7:50   ` Daniel Vetter
@ 2019-06-26  2:00     ` Rodrigo Siqueira
  2019-06-26  7:52       ` Daniel Vetter
  0 siblings, 1 reply; 7+ messages in thread
From: Rodrigo Siqueira @ 2019-06-26  2:00 UTC (permalink / raw)
  To: Maarten Lankhorst, Maxime Ripard, Sean Paul, David Airlie,
	dri-devel, linux-kernel, kernel-janitors, intel-gfx


[-- Attachment #1.1: Type: text/plain, Size: 3963 bytes --]

On 06/19, Daniel Vetter wrote:
> On Wed, Jun 19, 2019 at 09:48:56AM +0200, Daniel Vetter wrote:
> > On Tue, Jun 18, 2019 at 11:07:50PM -0300, Rodrigo Siqueira wrote:
> > > For historical reason, the function drm_wait_vblank_ioctl always return
> > > -EINVAL if something gets wrong. This scenario limits the flexibility
> > > for the userspace make detailed verification of the problem and take
> > > some action. In particular, the validation of “if (!dev->irq_enabled)”
> > > in the drm_wait_vblank_ioctl is responsible for checking if the driver
> > > support vblank or not. If the driver does not support VBlank, the
> > > function drm_wait_vblank_ioctl returns EINVAL which does not represent
> > > the real issue; this patch changes this behavior by return EOPNOTSUPP.
> > > Additionally, some operations are unsupported by this function, and
> > > returns EINVAL; this patch also changes the return value to EOPNOTSUPP
> > > in this case. Lastly, the function drm_wait_vblank_ioctl is invoked by
> > > libdrm, which is used by many compositors; because of this, it is
> > > important to check if this change breaks any compositor. In this sense,
> > > the following projects were examined:
> > > 
> > > * Drm-hwcomposer
> > > * Kwin
> > > * Sway
> > > * Wlroots
> > > * Wayland-core
> > > * Weston
> > > * Xorg (67 different drivers)
> > > 
> > > For each repository the verification happened in three steps:
> > > 
> > > * Update the main branch
> > > * Look for any occurrence "drmWaitVBlank" with the command:
> > >   git grep -n "drmWaitVBlank"
> > > * Look in the git history of the project with the command:
> > >   git log -SdrmWaitVBlank
> > > 
> > > Finally, none of the above projects validate the use of EINVAL which
> > > make safe, at least for these projects, to change the return values.
> > > 
> > > Change since V3:
> > >  - Return EINVAL for _DRM_VBLANK_SIGNAL (Daniel)
> > > 
> > > Change since V2:
> > >  Daniel Vetter and Chris Wilson
> > >  - Replace ENOTTY by EOPNOTSUPP
> > >  - Return EINVAL if the parameters are wrong
> > > 
> > 
> > Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> > 
> > Apologies for the confusion on the last time around. btw if someone tells
> > you "r-b (or a-b) with these changes", then just apply the r-b/a-b tag
> > next time around. Otherwise people will re-review the same thing over and
> > over again.
> 
> btw when resending patches it's good practice to add anyone who commented
> on it (or who commented on the igt test for the same patch and other way
> round) onto the explicit Cc: list of the patch. That way it's easier for
> them to follow the patch evolution and do a quick r-b once they're happy.

Thanks for these valuable tips.
Do you think that is a good idea to resend this patch CC's everybody? Or
is it ok if I just apply it?
 
> If you don't do that then much bigger chances your patch gets ignored.
> -Daniel
> > 
> > > Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
> > > ---
> > >  drivers/gpu/drm/drm_vblank.c | 2 +-
> > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/gpu/drm/drm_vblank.c b/drivers/gpu/drm/drm_vblank.c
> > > index 603ab105125d..bed233361614 100644
> > > --- a/drivers/gpu/drm/drm_vblank.c
> > > +++ b/drivers/gpu/drm/drm_vblank.c
> > > @@ -1582,7 +1582,7 @@ int drm_wait_vblank_ioctl(struct drm_device *dev, void *data,
> > >  	unsigned int flags, pipe, high_pipe;
> > >  
> > >  	if (!dev->irq_enabled)
> > > -		return -EINVAL;
> > > +		return -EOPNOTSUPP;
> > >  
> > >  	if (vblwait->request.type & _DRM_VBLANK_SIGNAL)
> > >  		return -EINVAL;
> > > -- 
> > > 2.21.0
> > 
> > -- 
> > Daniel Vetter
> > Software Engineer, Intel Corporation
> > http://blog.ffwll.ch
> 
> -- 
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch

-- 
Rodrigo Siqueira
https://siqueira.tech

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [PATCH V4] drm/drm_vblank: Change EINVAL by the correct errno
  2019-06-26  2:00     ` Rodrigo Siqueira
@ 2019-06-26  7:52       ` Daniel Vetter
  2019-06-26 13:37         ` [Intel-gfx] " Rodrigo Siqueira
  0 siblings, 1 reply; 7+ messages in thread
From: Daniel Vetter @ 2019-06-26  7:52 UTC (permalink / raw)
  To: Rodrigo Siqueira
  Cc: Maxime Ripard, kernel-janitors, intel-gfx,
	Linux Kernel Mailing List, dri-devel, David Airlie

On Wed, Jun 26, 2019 at 4:00 AM Rodrigo Siqueira
<rodrigosiqueiramelo@gmail.com> wrote:
>
> On 06/19, Daniel Vetter wrote:
> > On Wed, Jun 19, 2019 at 09:48:56AM +0200, Daniel Vetter wrote:
> > > On Tue, Jun 18, 2019 at 11:07:50PM -0300, Rodrigo Siqueira wrote:
> > > > For historical reason, the function drm_wait_vblank_ioctl always return
> > > > -EINVAL if something gets wrong. This scenario limits the flexibility
> > > > for the userspace make detailed verification of the problem and take
> > > > some action. In particular, the validation of “if (!dev->irq_enabled)”
> > > > in the drm_wait_vblank_ioctl is responsible for checking if the driver
> > > > support vblank or not. If the driver does not support VBlank, the
> > > > function drm_wait_vblank_ioctl returns EINVAL which does not represent
> > > > the real issue; this patch changes this behavior by return EOPNOTSUPP.
> > > > Additionally, some operations are unsupported by this function, and
> > > > returns EINVAL; this patch also changes the return value to EOPNOTSUPP
> > > > in this case. Lastly, the function drm_wait_vblank_ioctl is invoked by
> > > > libdrm, which is used by many compositors; because of this, it is
> > > > important to check if this change breaks any compositor. In this sense,
> > > > the following projects were examined:
> > > >
> > > > * Drm-hwcomposer
> > > > * Kwin
> > > > * Sway
> > > > * Wlroots
> > > > * Wayland-core
> > > > * Weston
> > > > * Xorg (67 different drivers)
> > > >
> > > > For each repository the verification happened in three steps:
> > > >
> > > > * Update the main branch
> > > > * Look for any occurrence "drmWaitVBlank" with the command:
> > > >   git grep -n "drmWaitVBlank"
> > > > * Look in the git history of the project with the command:
> > > >   git log -SdrmWaitVBlank
> > > >
> > > > Finally, none of the above projects validate the use of EINVAL which
> > > > make safe, at least for these projects, to change the return values.
> > > >
> > > > Change since V3:
> > > >  - Return EINVAL for _DRM_VBLANK_SIGNAL (Daniel)
> > > >
> > > > Change since V2:
> > > >  Daniel Vetter and Chris Wilson
> > > >  - Replace ENOTTY by EOPNOTSUPP
> > > >  - Return EINVAL if the parameters are wrong
> > > >
> > >
> > > Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> > >
> > > Apologies for the confusion on the last time around. btw if someone tells
> > > you "r-b (or a-b) with these changes", then just apply the r-b/a-b tag
> > > next time around. Otherwise people will re-review the same thing over and
> > > over again.
> >
> > btw when resending patches it's good practice to add anyone who commented
> > on it (or who commented on the igt test for the same patch and other way
> > round) onto the explicit Cc: list of the patch. That way it's easier for
> > them to follow the patch evolution and do a quick r-b once they're happy.
>
> Thanks for these valuable tips.
> Do you think that is a good idea to resend this patch CC's everybody? Or
> is it ok if I just apply it?

Hm I thought I answered that on irc ... but just today I realized that
we missed 2 ioctls. There's also drm_crtc_get_sequence_ioctl and
drm_crtc_queue_sequence_ioctl which have the same dev->irq_enabled
check and I think should be treated the same.

Can you pls resend with those addressed too? Then you can also resend
with the cc's all added.
-Daniel

>
> > If you don't do that then much bigger chances your patch gets ignored.
> > -Daniel
> > >
> > > > Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
> > > > ---
> > > >  drivers/gpu/drm/drm_vblank.c | 2 +-
> > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/drm_vblank.c b/drivers/gpu/drm/drm_vblank.c
> > > > index 603ab105125d..bed233361614 100644
> > > > --- a/drivers/gpu/drm/drm_vblank.c
> > > > +++ b/drivers/gpu/drm/drm_vblank.c
> > > > @@ -1582,7 +1582,7 @@ int drm_wait_vblank_ioctl(struct drm_device *dev, void *data,
> > > >   unsigned int flags, pipe, high_pipe;
> > > >
> > > >   if (!dev->irq_enabled)
> > > > -         return -EINVAL;
> > > > +         return -EOPNOTSUPP;
> > > >
> > > >   if (vblwait->request.type & _DRM_VBLANK_SIGNAL)
> > > >           return -EINVAL;
> > > > --
> > > > 2.21.0
> > >
> > > --
> > > Daniel Vetter
> > > Software Engineer, Intel Corporation
> > > http://blog.ffwll.ch
> >
> > --
> > Daniel Vetter
> > Software Engineer, Intel Corporation
> > http://blog.ffwll.ch
>
> --
> Rodrigo Siqueira
> https://siqueira.tech
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx



-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [Intel-gfx] [PATCH V4] drm/drm_vblank: Change EINVAL by the correct errno
  2019-06-26  7:52       ` Daniel Vetter
@ 2019-06-26 13:37         ` Rodrigo Siqueira
  2019-06-26 14:26           ` Daniel Vetter
  0 siblings, 1 reply; 7+ messages in thread
From: Rodrigo Siqueira @ 2019-06-26 13:37 UTC (permalink / raw)
  To: Daniel Vetter
  Cc: Maarten Lankhorst, Maxime Ripard, Sean Paul, David Airlie,
	dri-devel, Linux Kernel Mailing List, kernel-janitors, intel-gfx

On Wed, Jun 26, 2019 at 4:53 AM Daniel Vetter <daniel@ffwll.ch> wrote:
>
> On Wed, Jun 26, 2019 at 4:00 AM Rodrigo Siqueira
> <rodrigosiqueiramelo@gmail.com> wrote:
> >
> > On 06/19, Daniel Vetter wrote:
> > > On Wed, Jun 19, 2019 at 09:48:56AM +0200, Daniel Vetter wrote:
> > > > On Tue, Jun 18, 2019 at 11:07:50PM -0300, Rodrigo Siqueira wrote:
> > > > > For historical reason, the function drm_wait_vblank_ioctl always return
> > > > > -EINVAL if something gets wrong. This scenario limits the flexibility
> > > > > for the userspace make detailed verification of the problem and take
> > > > > some action. In particular, the validation of “if (!dev->irq_enabled)”
> > > > > in the drm_wait_vblank_ioctl is responsible for checking if the driver
> > > > > support vblank or not. If the driver does not support VBlank, the
> > > > > function drm_wait_vblank_ioctl returns EINVAL which does not represent
> > > > > the real issue; this patch changes this behavior by return EOPNOTSUPP.
> > > > > Additionally, some operations are unsupported by this function, and
> > > > > returns EINVAL; this patch also changes the return value to EOPNOTSUPP
> > > > > in this case. Lastly, the function drm_wait_vblank_ioctl is invoked by
> > > > > libdrm, which is used by many compositors; because of this, it is
> > > > > important to check if this change breaks any compositor. In this sense,
> > > > > the following projects were examined:
> > > > >
> > > > > * Drm-hwcomposer
> > > > > * Kwin
> > > > > * Sway
> > > > > * Wlroots
> > > > > * Wayland-core
> > > > > * Weston
> > > > > * Xorg (67 different drivers)
> > > > >
> > > > > For each repository the verification happened in three steps:
> > > > >
> > > > > * Update the main branch
> > > > > * Look for any occurrence "drmWaitVBlank" with the command:
> > > > >   git grep -n "drmWaitVBlank"
> > > > > * Look in the git history of the project with the command:
> > > > >   git log -SdrmWaitVBlank
> > > > >
> > > > > Finally, none of the above projects validate the use of EINVAL which
> > > > > make safe, at least for these projects, to change the return values.
> > > > >
> > > > > Change since V3:
> > > > >  - Return EINVAL for _DRM_VBLANK_SIGNAL (Daniel)
> > > > >
> > > > > Change since V2:
> > > > >  Daniel Vetter and Chris Wilson
> > > > >  - Replace ENOTTY by EOPNOTSUPP
> > > > >  - Return EINVAL if the parameters are wrong
> > > > >
> > > >
> > > > Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> > > >
> > > > Apologies for the confusion on the last time around. btw if someone tells
> > > > you "r-b (or a-b) with these changes", then just apply the r-b/a-b tag
> > > > next time around. Otherwise people will re-review the same thing over and
> > > > over again.
> > >
> > > btw when resending patches it's good practice to add anyone who commented
> > > on it (or who commented on the igt test for the same patch and other way
> > > round) onto the explicit Cc: list of the patch. That way it's easier for
> > > them to follow the patch evolution and do a quick r-b once they're happy.
> >
> > Thanks for these valuable tips.
> > Do you think that is a good idea to resend this patch CC's everybody? Or
> > is it ok if I just apply it?
>
> Hm I thought I answered that on irc ... but just today I realized that
> we missed 2 ioctls. There's also drm_crtc_get_sequence_ioctl and
> drm_crtc_queue_sequence_ioctl which have the same dev->irq_enabled
> check and I think should be treated the same.

Hi,

I reexamined all the composers described in the commit message (latest
versions) to check if any project use and validate the return value
from  drm_crtc_get_sequence_ioctl and drm_crtc_queue_sequence_ioctl. I
noticed that mesa and xserver use them. FWIU replace EINVAL by
EOPNOTSUPP is harmless for mesa project, however it is not the same
for xserver.

Take a look at line 189 and 238 of hw/xfree86/drivers/modesetting/vblank.c

* https://gitlab.freedesktop.org/xorg/xserver/blob/master/hw/xfree86/drivers/modesetting/vblank.c#L238
* https://gitlab.freedesktop.org/xorg/xserver/blob/master/hw/xfree86/drivers/modesetting/vblank.c#L189

A little bit below the above lines, you can see a validation like that:

  if (ret != -1 || (errno != ENOTTY && errno != EINVAL))

In other words, if we change the EINVAL by EOPNOTSUPP
drm_crtc_[get|queue]_sequence_ioctl we could break xserver. I noticed
that Keith Packard introduced these ioctls to the kernel and also to
the xserver, I will prepare a new version and CC Keith. Should I do
another thing to notify xserver developers?

Thanks

> Can you pls resend with those addressed too? Then you can also resend
> with the cc's all added.
> -Daniel
>
> >
> > > If you don't do that then much bigger chances your patch gets ignored.
> > > -Daniel
> > > >
> > > > > Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
> > > > > ---
> > > > >  drivers/gpu/drm/drm_vblank.c | 2 +-
> > > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > > >
> > > > > diff --git a/drivers/gpu/drm/drm_vblank.c b/drivers/gpu/drm/drm_vblank.c
> > > > > index 603ab105125d..bed233361614 100644
> > > > > --- a/drivers/gpu/drm/drm_vblank.c
> > > > > +++ b/drivers/gpu/drm/drm_vblank.c
> > > > > @@ -1582,7 +1582,7 @@ int drm_wait_vblank_ioctl(struct drm_device *dev, void *data,
> > > > >   unsigned int flags, pipe, high_pipe;
> > > > >
> > > > >   if (!dev->irq_enabled)
> > > > > -         return -EINVAL;
> > > > > +         return -EOPNOTSUPP;
> > > > >
> > > > >   if (vblwait->request.type & _DRM_VBLANK_SIGNAL)
> > > > >           return -EINVAL;
> > > > > --
> > > > > 2.21.0
> > > >
> > > > --
> > > > Daniel Vetter
> > > > Software Engineer, Intel Corporation
> > > > http://blog.ffwll.ch
> > >
> > > --
> > > Daniel Vetter
> > > Software Engineer, Intel Corporation
> > > http://blog.ffwll.ch
> >
> > --
> > Rodrigo Siqueira
> > https://siqueira.tech
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
>
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch



-- 

Rodrigo Siqueira
https://siqueira.tech

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: [Intel-gfx] [PATCH V4] drm/drm_vblank: Change EINVAL by the correct errno
  2019-06-26 13:37         ` [Intel-gfx] " Rodrigo Siqueira
@ 2019-06-26 14:26           ` Daniel Vetter
  0 siblings, 0 replies; 7+ messages in thread
From: Daniel Vetter @ 2019-06-26 14:26 UTC (permalink / raw)
  To: Rodrigo Siqueira
  Cc: Daniel Vetter, Maarten Lankhorst, Maxime Ripard, Sean Paul,
	David Airlie, dri-devel, Linux Kernel Mailing List,
	kernel-janitors, intel-gfx

On Wed, Jun 26, 2019 at 10:37:11AM -0300, Rodrigo Siqueira wrote:
> On Wed, Jun 26, 2019 at 4:53 AM Daniel Vetter <daniel@ffwll.ch> wrote:
> >
> > On Wed, Jun 26, 2019 at 4:00 AM Rodrigo Siqueira
> > <rodrigosiqueiramelo@gmail.com> wrote:
> > >
> > > On 06/19, Daniel Vetter wrote:
> > > > On Wed, Jun 19, 2019 at 09:48:56AM +0200, Daniel Vetter wrote:
> > > > > On Tue, Jun 18, 2019 at 11:07:50PM -0300, Rodrigo Siqueira wrote:
> > > > > > For historical reason, the function drm_wait_vblank_ioctl always return
> > > > > > -EINVAL if something gets wrong. This scenario limits the flexibility
> > > > > > for the userspace make detailed verification of the problem and take
> > > > > > some action. In particular, the validation of “if (!dev->irq_enabled)”
> > > > > > in the drm_wait_vblank_ioctl is responsible for checking if the driver
> > > > > > support vblank or not. If the driver does not support VBlank, the
> > > > > > function drm_wait_vblank_ioctl returns EINVAL which does not represent
> > > > > > the real issue; this patch changes this behavior by return EOPNOTSUPP.
> > > > > > Additionally, some operations are unsupported by this function, and
> > > > > > returns EINVAL; this patch also changes the return value to EOPNOTSUPP
> > > > > > in this case. Lastly, the function drm_wait_vblank_ioctl is invoked by
> > > > > > libdrm, which is used by many compositors; because of this, it is
> > > > > > important to check if this change breaks any compositor. In this sense,
> > > > > > the following projects were examined:
> > > > > >
> > > > > > * Drm-hwcomposer
> > > > > > * Kwin
> > > > > > * Sway
> > > > > > * Wlroots
> > > > > > * Wayland-core
> > > > > > * Weston
> > > > > > * Xorg (67 different drivers)
> > > > > >
> > > > > > For each repository the verification happened in three steps:
> > > > > >
> > > > > > * Update the main branch
> > > > > > * Look for any occurrence "drmWaitVBlank" with the command:
> > > > > >   git grep -n "drmWaitVBlank"
> > > > > > * Look in the git history of the project with the command:
> > > > > >   git log -SdrmWaitVBlank
> > > > > >
> > > > > > Finally, none of the above projects validate the use of EINVAL which
> > > > > > make safe, at least for these projects, to change the return values.
> > > > > >
> > > > > > Change since V3:
> > > > > >  - Return EINVAL for _DRM_VBLANK_SIGNAL (Daniel)
> > > > > >
> > > > > > Change since V2:
> > > > > >  Daniel Vetter and Chris Wilson
> > > > > >  - Replace ENOTTY by EOPNOTSUPP
> > > > > >  - Return EINVAL if the parameters are wrong
> > > > > >
> > > > >
> > > > > Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
> > > > >
> > > > > Apologies for the confusion on the last time around. btw if someone tells
> > > > > you "r-b (or a-b) with these changes", then just apply the r-b/a-b tag
> > > > > next time around. Otherwise people will re-review the same thing over and
> > > > > over again.
> > > >
> > > > btw when resending patches it's good practice to add anyone who commented
> > > > on it (or who commented on the igt test for the same patch and other way
> > > > round) onto the explicit Cc: list of the patch. That way it's easier for
> > > > them to follow the patch evolution and do a quick r-b once they're happy.
> > >
> > > Thanks for these valuable tips.
> > > Do you think that is a good idea to resend this patch CC's everybody? Or
> > > is it ok if I just apply it?
> >
> > Hm I thought I answered that on irc ... but just today I realized that
> > we missed 2 ioctls. There's also drm_crtc_get_sequence_ioctl and
> > drm_crtc_queue_sequence_ioctl which have the same dev->irq_enabled
> > check and I think should be treated the same.
> 
> Hi,
> 
> I reexamined all the composers described in the commit message (latest
> versions) to check if any project use and validate the return value
> from  drm_crtc_get_sequence_ioctl and drm_crtc_queue_sequence_ioctl. I
> noticed that mesa and xserver use them. FWIU replace EINVAL by
> EOPNOTSUPP is harmless for mesa project, however it is not the same
> for xserver.
> 
> Take a look at line 189 and 238 of hw/xfree86/drivers/modesetting/vblank.c
> 
> * https://gitlab.freedesktop.org/xorg/xserver/blob/master/hw/xfree86/drivers/modesetting/vblank.c#L238
> * https://gitlab.freedesktop.org/xorg/xserver/blob/master/hw/xfree86/drivers/modesetting/vblank.c#L189
> 
> A little bit below the above lines, you can see a validation like that:
> 
>   if (ret != -1 || (errno != ENOTTY && errno != EINVAL))
> 
> In other words, if we change the EINVAL by EOPNOTSUPP
> drm_crtc_[get|queue]_sequence_ioctl we could break xserver. I noticed
> that Keith Packard introduced these ioctls to the kernel and also to
> the xserver, I will prepare a new version and CC Keith. Should I do
> another thing to notify xserver developers?

If you want cc: xorg-devel or so, but I think they all moved to gitlab and
the m-l is pretty dead. Cc'ing Keith should be enough.

I looked at the code and I think we're fine. Better than fine actually,
because if dev->irq_enabled == false then we really shouldn't use vblank
ioctl, no matter whether the new or old version.

So for drivers without vblank support, all that will happen is that we
leave ->has_queue_sequence as false and then fail a bit later on with the
legacy ioctl. Should be all harmless.

Note that the idea behind filtering out EINVAL is that if you do a
QueueSequence on a crtc that's currently off, then it'll fail with EINVAL.
But the ioctl still works, hence why we want to accept that. Setting
has_queue_sequence = TRUE for the case where there's actually no vblank
might trigger a bug somewhere later on.
-Daniel

> 
> Thanks
> 
> > Can you pls resend with those addressed too? Then you can also resend
> > with the cc's all added.
> > -Daniel
> >
> > >
> > > > If you don't do that then much bigger chances your patch gets ignored.
> > > > -Daniel
> > > > >
> > > > > > Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
> > > > > > ---
> > > > > >  drivers/gpu/drm/drm_vblank.c | 2 +-
> > > > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > > > >
> > > > > > diff --git a/drivers/gpu/drm/drm_vblank.c b/drivers/gpu/drm/drm_vblank.c
> > > > > > index 603ab105125d..bed233361614 100644
> > > > > > --- a/drivers/gpu/drm/drm_vblank.c
> > > > > > +++ b/drivers/gpu/drm/drm_vblank.c
> > > > > > @@ -1582,7 +1582,7 @@ int drm_wait_vblank_ioctl(struct drm_device *dev, void *data,
> > > > > >   unsigned int flags, pipe, high_pipe;
> > > > > >
> > > > > >   if (!dev->irq_enabled)
> > > > > > -         return -EINVAL;
> > > > > > +         return -EOPNOTSUPP;
> > > > > >
> > > > > >   if (vblwait->request.type & _DRM_VBLANK_SIGNAL)
> > > > > >           return -EINVAL;
> > > > > > --
> > > > > > 2.21.0
> > > > >
> > > > > --
> > > > > Daniel Vetter
> > > > > Software Engineer, Intel Corporation
> > > > > http://blog.ffwll.ch
> > > >
> > > > --
> > > > Daniel Vetter
> > > > Software Engineer, Intel Corporation
> > > > http://blog.ffwll.ch
> > >
> > > --
> > > Rodrigo Siqueira
> > > https://siqueira.tech
> > > _______________________________________________
> > > Intel-gfx mailing list
> > > Intel-gfx@lists.freedesktop.org
> > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> >
> >
> >
> > --
> > Daniel Vetter
> > Software Engineer, Intel Corporation
> > +41 (0) 79 365 57 48 - http://blog.ffwll.ch
> 
> 
> 
> -- 
> 
> Rodrigo Siqueira
> https://siqueira.tech

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2019-06-26 14:26 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-19  2:07 [PATCH V4] drm/drm_vblank: Change EINVAL by the correct errno Rodrigo Siqueira
2019-06-19  7:48 ` Daniel Vetter
2019-06-19  7:50   ` Daniel Vetter
2019-06-26  2:00     ` Rodrigo Siqueira
2019-06-26  7:52       ` Daniel Vetter
2019-06-26 13:37         ` [Intel-gfx] " Rodrigo Siqueira
2019-06-26 14:26           ` Daniel Vetter

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).