dri-devel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH RFT v1 0/3] devfreq fixes for panfrost
@ 2020-01-07 23:06 Martin Blumenstingl
  2020-01-07 23:06 ` [PATCH RFT v1 1/3] drm/panfrost: enable devfreq based the "operating-points-v2" property Martin Blumenstingl
                   ` (2 more replies)
  0 siblings, 3 replies; 12+ messages in thread
From: Martin Blumenstingl @ 2020-01-07 23:06 UTC (permalink / raw)
  To: dri-devel, alyssa, steven.price, tomeu.vizoso, robh
  Cc: airlied, linux-kernel, Martin Blumenstingl, linux-rockchip,
	linux-amlogic, robin.murphy

These are a bunch of devfreq fixes for panfrost that came up in a
discussion with Robin Murphy during the code-review of the lima
devfreq patches: [0]

I am only able to test patch #1 properly because the only boards with
panfrost GPU that I have are using an Amlogic SoC. We don't have
support for the OPP tables or dynamic clock changes there yet.
So patches #2 and #3 are compile-tested only.


[0] https://patchwork.freedesktop.org/patch/346898/

Martin Blumenstingl (3):
  drm/panfrost: enable devfreq based the "operating-points-v2" property
  drm/panfrost: call dev_pm_opp_of_remove_table() in all error-paths
  drm/panfrost: Use the mali-supply regulator for control again

 drivers/gpu/drm/panfrost/panfrost_devfreq.c | 33 ++++++++++++++++++---
 drivers/gpu/drm/panfrost/panfrost_device.h  |  1 +
 2 files changed, 30 insertions(+), 4 deletions(-)

-- 
2.24.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH RFT v1 1/3] drm/panfrost: enable devfreq based the "operating-points-v2" property
  2020-01-07 23:06 [PATCH RFT v1 0/3] devfreq fixes for panfrost Martin Blumenstingl
@ 2020-01-07 23:06 ` Martin Blumenstingl
  2020-01-08 11:18   ` Robin Murphy
  2020-01-07 23:06 ` [PATCH RFT v1 2/3] drm/panfrost: call dev_pm_opp_of_remove_table() in all error-paths Martin Blumenstingl
  2020-01-07 23:06 ` [PATCH RFT v1 3/3] drm/panfrost: Use the mali-supply regulator for control again Martin Blumenstingl
  2 siblings, 1 reply; 12+ messages in thread
From: Martin Blumenstingl @ 2020-01-07 23:06 UTC (permalink / raw)
  To: dri-devel, alyssa, steven.price, tomeu.vizoso, robh
  Cc: airlied, linux-kernel, Martin Blumenstingl, linux-rockchip,
	linux-amlogic, robin.murphy

Decouple the check to see whether we want to enable devfreq for the GPU
from dev_pm_opp_set_regulators(). This is preparation work for adding
back support for regulator control (which means we need to call
dev_pm_opp_set_regulators() before dev_pm_opp_of_add_table(), which
means having a check for "is devfreq enabled" that is not tied to
dev_pm_opp_of_add_table() makes things easier).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/gpu/drm/panfrost/panfrost_devfreq.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
index 413987038fbf..1471588763ce 100644
--- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
+++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
@@ -5,6 +5,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_opp.h>
 #include <linux/clk.h>
+#include <linux/property.h>
 #include <linux/regulator/consumer.h>
 
 #include "panfrost_device.h"
@@ -79,10 +80,12 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 	struct devfreq *devfreq;
 	struct thermal_cooling_device *cooling;
 
-	ret = dev_pm_opp_of_add_table(dev);
-	if (ret == -ENODEV) /* Optional, continue without devfreq */
+	if (!device_property_present(dev, "operating-points-v2"))
+		/* Optional, continue without devfreq */
 		return 0;
-	else if (ret)
+
+	ret = dev_pm_opp_of_add_table(dev);
+	if (ret)
 		return ret;
 
 	panfrost_devfreq_reset(pfdev);
-- 
2.24.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH RFT v1 2/3] drm/panfrost: call dev_pm_opp_of_remove_table() in all error-paths
  2020-01-07 23:06 [PATCH RFT v1 0/3] devfreq fixes for panfrost Martin Blumenstingl
  2020-01-07 23:06 ` [PATCH RFT v1 1/3] drm/panfrost: enable devfreq based the "operating-points-v2" property Martin Blumenstingl
@ 2020-01-07 23:06 ` Martin Blumenstingl
  2020-01-09 11:31   ` Steven Price
  2020-01-07 23:06 ` [PATCH RFT v1 3/3] drm/panfrost: Use the mali-supply regulator for control again Martin Blumenstingl
  2 siblings, 1 reply; 12+ messages in thread
From: Martin Blumenstingl @ 2020-01-07 23:06 UTC (permalink / raw)
  To: dri-devel, alyssa, steven.price, tomeu.vizoso, robh
  Cc: airlied, linux-kernel, Martin Blumenstingl, linux-rockchip,
	linux-amlogic, robin.murphy

If devfreq_recommended_opp() fails we need to undo
dev_pm_opp_of_add_table() by calling dev_pm_opp_of_remove_table() (just
like we do it in the other error-path below).

Fixes: f3ba91228e8e91 ("drm/panfrost: Add initial panfrost driver")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/gpu/drm/panfrost/panfrost_devfreq.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
index 1471588763ce..170f6c8c9651 100644
--- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
+++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
@@ -93,8 +93,10 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 	cur_freq = clk_get_rate(pfdev->clock);
 
 	opp = devfreq_recommended_opp(dev, &cur_freq, 0);
-	if (IS_ERR(opp))
+	if (IS_ERR(opp)) {
+		dev_pm_opp_of_remove_table(dev);
 		return PTR_ERR(opp);
+	}
 
 	panfrost_devfreq_profile.initial_freq = cur_freq;
 	dev_pm_opp_put(opp);
-- 
2.24.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH RFT v1 3/3] drm/panfrost: Use the mali-supply regulator for control again
  2020-01-07 23:06 [PATCH RFT v1 0/3] devfreq fixes for panfrost Martin Blumenstingl
  2020-01-07 23:06 ` [PATCH RFT v1 1/3] drm/panfrost: enable devfreq based the "operating-points-v2" property Martin Blumenstingl
  2020-01-07 23:06 ` [PATCH RFT v1 2/3] drm/panfrost: call dev_pm_opp_of_remove_table() in all error-paths Martin Blumenstingl
@ 2020-01-07 23:06 ` Martin Blumenstingl
  2020-01-09 11:31   ` Steven Price
  2 siblings, 1 reply; 12+ messages in thread
From: Martin Blumenstingl @ 2020-01-07 23:06 UTC (permalink / raw)
  To: dri-devel, alyssa, steven.price, tomeu.vizoso, robh
  Cc: airlied, linux-kernel, Martin Blumenstingl, linux-rockchip,
	linux-amlogic, robin.murphy

dev_pm_opp_set_rate() needs a reference to the regulator which should be
updated when updating the GPU frequency. The name of the regulator has
to be passed at initialization-time using dev_pm_opp_set_regulators().
Add the call to dev_pm_opp_set_regulators() so dev_pm_opp_set_rate()
will update the GPU regulator when updating the frequency (just like
we did this manually before when we open-coded dev_pm_opp_set_rate()).

Fixes: 221bc77914cbcc ("drm/panfrost: Use generic code for devfreq")
Reported-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/gpu/drm/panfrost/panfrost_devfreq.c | 22 ++++++++++++++++++++-
 drivers/gpu/drm/panfrost/panfrost_device.h  |  1 +
 2 files changed, 22 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
index 170f6c8c9651..4f7999c7b44c 100644
--- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
+++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
@@ -74,6 +74,7 @@ static struct devfreq_dev_profile panfrost_devfreq_profile = {
 int panfrost_devfreq_init(struct panfrost_device *pfdev)
 {
 	int ret;
+	struct opp_table *opp_table;
 	struct dev_pm_opp *opp;
 	unsigned long cur_freq;
 	struct device *dev = &pfdev->pdev->dev;
@@ -84,9 +85,24 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 		/* Optional, continue without devfreq */
 		return 0;
 
+	opp_table = dev_pm_opp_set_regulators(dev,
+					      (const char *[]){ "mali" },
+					      1);
+	if (IS_ERR(opp_table)) {
+		ret = PTR_ERR(opp_table);
+
+		/* Continue if the optional regulator is missing */
+		if (ret != -ENODEV)
+			return ret;
+	} else {
+		pfdev->devfreq.regulators_opp_table = opp_table;
+	}
+
 	ret = dev_pm_opp_of_add_table(dev);
-	if (ret)
+	if (ret) {
+		dev_pm_opp_put_regulators(pfdev->devfreq.regulators_opp_table);
 		return ret;
+	}
 
 	panfrost_devfreq_reset(pfdev);
 
@@ -95,6 +111,7 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 	opp = devfreq_recommended_opp(dev, &cur_freq, 0);
 	if (IS_ERR(opp)) {
 		dev_pm_opp_of_remove_table(dev);
+		dev_pm_opp_put_regulators(pfdev->devfreq.regulators_opp_table);
 		return PTR_ERR(opp);
 	}
 
@@ -106,6 +123,7 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 	if (IS_ERR(devfreq)) {
 		DRM_DEV_ERROR(dev, "Couldn't initialize GPU devfreq\n");
 		dev_pm_opp_of_remove_table(dev);
+		dev_pm_opp_put_regulators(pfdev->devfreq.regulators_opp_table);
 		return PTR_ERR(devfreq);
 	}
 	pfdev->devfreq.devfreq = devfreq;
@@ -124,6 +142,8 @@ void panfrost_devfreq_fini(struct panfrost_device *pfdev)
 	if (pfdev->devfreq.cooling)
 		devfreq_cooling_unregister(pfdev->devfreq.cooling);
 	dev_pm_opp_of_remove_table(&pfdev->pdev->dev);
+	if (pfdev->devfreq.regulators_opp_table)
+		dev_pm_opp_put_regulators(pfdev->devfreq.regulators_opp_table);
 }
 
 void panfrost_devfreq_resume(struct panfrost_device *pfdev)
diff --git a/drivers/gpu/drm/panfrost/panfrost_device.h b/drivers/gpu/drm/panfrost/panfrost_device.h
index 06713811b92c..4878b239e301 100644
--- a/drivers/gpu/drm/panfrost/panfrost_device.h
+++ b/drivers/gpu/drm/panfrost/panfrost_device.h
@@ -85,6 +85,7 @@ struct panfrost_device {
 
 	struct {
 		struct devfreq *devfreq;
+		struct opp_table *regulators_opp_table;
 		struct thermal_cooling_device *cooling;
 		ktime_t busy_time;
 		ktime_t idle_time;
-- 
2.24.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH RFT v1 1/3] drm/panfrost: enable devfreq based the "operating-points-v2" property
  2020-01-07 23:06 ` [PATCH RFT v1 1/3] drm/panfrost: enable devfreq based the "operating-points-v2" property Martin Blumenstingl
@ 2020-01-08 11:18   ` Robin Murphy
  2020-01-08 12:38     ` Martin Blumenstingl
  0 siblings, 1 reply; 12+ messages in thread
From: Robin Murphy @ 2020-01-08 11:18 UTC (permalink / raw)
  To: Martin Blumenstingl, dri-devel, alyssa, steven.price, tomeu.vizoso, robh
  Cc: airlied, linux-amlogic, linux-kernel, linux-rockchip

On 07/01/2020 11:06 pm, Martin Blumenstingl wrote:
> Decouple the check to see whether we want to enable devfreq for the GPU
> from dev_pm_opp_set_regulators(). This is preparation work for adding
> back support for regulator control (which means we need to call
> dev_pm_opp_set_regulators() before dev_pm_opp_of_add_table(), which
> means having a check for "is devfreq enabled" that is not tied to
> dev_pm_opp_of_add_table() makes things easier).

Hmm, what about cases like the SCMI DVFS protocol where the OPPs are 
dynamically discovered rather than statically defined in DT?

Robin.

> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>   drivers/gpu/drm/panfrost/panfrost_devfreq.c | 9 ++++++---
>   1 file changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> index 413987038fbf..1471588763ce 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> @@ -5,6 +5,7 @@
>   #include <linux/platform_device.h>
>   #include <linux/pm_opp.h>
>   #include <linux/clk.h>
> +#include <linux/property.h>
>   #include <linux/regulator/consumer.h>
>   
>   #include "panfrost_device.h"
> @@ -79,10 +80,12 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
>   	struct devfreq *devfreq;
>   	struct thermal_cooling_device *cooling;
>   
> -	ret = dev_pm_opp_of_add_table(dev);
> -	if (ret == -ENODEV) /* Optional, continue without devfreq */
> +	if (!device_property_present(dev, "operating-points-v2"))
> +		/* Optional, continue without devfreq */
>   		return 0;
> -	else if (ret)
> +
> +	ret = dev_pm_opp_of_add_table(dev);
> +	if (ret)
>   		return ret;
>   
>   	panfrost_devfreq_reset(pfdev);
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH RFT v1 1/3] drm/panfrost: enable devfreq based the "operating-points-v2" property
  2020-01-08 11:18   ` Robin Murphy
@ 2020-01-08 12:38     ` Martin Blumenstingl
  2020-01-08 14:20       ` Robin Murphy
  0 siblings, 1 reply; 12+ messages in thread
From: Martin Blumenstingl @ 2020-01-08 12:38 UTC (permalink / raw)
  To: Robin Murphy
  Cc: tomeu.vizoso, airlied, linux-kernel, dri-devel, steven.price,
	linux-rockchip, linux-amlogic, alyssa

Hi Robin,

On Wed, Jan 8, 2020 at 12:18 PM Robin Murphy <robin.murphy@arm.com> wrote:
>
> On 07/01/2020 11:06 pm, Martin Blumenstingl wrote:
> > Decouple the check to see whether we want to enable devfreq for the GPU
> > from dev_pm_opp_set_regulators(). This is preparation work for adding
> > back support for regulator control (which means we need to call
> > dev_pm_opp_set_regulators() before dev_pm_opp_of_add_table(), which
> > means having a check for "is devfreq enabled" that is not tied to
> > dev_pm_opp_of_add_table() makes things easier).
>
> Hmm, what about cases like the SCMI DVFS protocol where the OPPs are
> dynamically discovered rather than statically defined in DT?
where can I find such an example (Amlogic SoCs use SCPI instead of
SCMI, so I don't think that I have any board with SCMI support) or
some documentation?
(I could only find SCPI clock and CPU DVFS implementations, but no
generic "OPPs for any device" implementation)


Martin
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH RFT v1 1/3] drm/panfrost: enable devfreq based the "operating-points-v2" property
  2020-01-08 12:38     ` Martin Blumenstingl
@ 2020-01-08 14:20       ` Robin Murphy
  0 siblings, 0 replies; 12+ messages in thread
From: Robin Murphy @ 2020-01-08 14:20 UTC (permalink / raw)
  To: Martin Blumenstingl
  Cc: tomeu.vizoso, airlied, linux-kernel, dri-devel, steven.price,
	linux-rockchip, Sudeep Holla, linux-amlogic, alyssa

[ +Sudeep ]

On 08/01/2020 12:38 pm, Martin Blumenstingl wrote:
> Hi Robin,
> 
> On Wed, Jan 8, 2020 at 12:18 PM Robin Murphy <robin.murphy@arm.com> wrote:
>>
>> On 07/01/2020 11:06 pm, Martin Blumenstingl wrote:
>>> Decouple the check to see whether we want to enable devfreq for the GPU
>>> from dev_pm_opp_set_regulators(). This is preparation work for adding
>>> back support for regulator control (which means we need to call
>>> dev_pm_opp_set_regulators() before dev_pm_opp_of_add_table(), which
>>> means having a check for "is devfreq enabled" that is not tied to
>>> dev_pm_opp_of_add_table() makes things easier).
>>
>> Hmm, what about cases like the SCMI DVFS protocol where the OPPs are
>> dynamically discovered rather than statically defined in DT?
> where can I find such an example (Amlogic SoCs use SCPI instead of
> SCMI, so I don't think that I have any board with SCMI support) or
> some documentation?
> (I could only find SCPI clock and CPU DVFS implementations, but no
> generic "OPPs for any device" implementation)

On closer inspection I think this applies to the SCPI DVFS protocol 
too[1]. AIUI the fact that neither is wired up to a devfreq driver yet 
is merely due to lack of demand and suitable systems to develop/test on 
so far - the panfrost devfreq code is only now looking like the first 
viable upstream use-case ;)

Robin.

[1] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922g/BABFEBCD.html
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH RFT v1 3/3] drm/panfrost: Use the mali-supply regulator for control again
  2020-01-07 23:06 ` [PATCH RFT v1 3/3] drm/panfrost: Use the mali-supply regulator for control again Martin Blumenstingl
@ 2020-01-09 11:31   ` Steven Price
  2020-01-09 17:27     ` Martin Blumenstingl
  0 siblings, 1 reply; 12+ messages in thread
From: Steven Price @ 2020-01-09 11:31 UTC (permalink / raw)
  To: Martin Blumenstingl, dri-devel, alyssa, tomeu.vizoso, robh
  Cc: airlied, linux-rockchip, robin.murphy, linux-kernel, linux-amlogic

On 07/01/2020 23:06, Martin Blumenstingl wrote:
> dev_pm_opp_set_rate() needs a reference to the regulator which should be
> updated when updating the GPU frequency. The name of the regulator has
> to be passed at initialization-time using dev_pm_opp_set_regulators().
> Add the call to dev_pm_opp_set_regulators() so dev_pm_opp_set_rate()
> will update the GPU regulator when updating the frequency (just like
> we did this manually before when we open-coded dev_pm_opp_set_rate()).

This patch causes a warning from debugfs on my firefly (RK3288) board:

debugfs: Directory 'ffa30000.gpu-mali' with parent 'vdd_gpu' already
present!

So it looks like the regulator is being added twice - but I haven't
investigated further.

> Fixes: 221bc77914cbcc ("drm/panfrost: Use generic code for devfreq")
> Reported-by: Robin Murphy <robin.murphy@arm.com>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>  drivers/gpu/drm/panfrost/panfrost_devfreq.c | 22 ++++++++++++++++++++-
>  drivers/gpu/drm/panfrost/panfrost_device.h  |  1 +
>  2 files changed, 22 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> index 170f6c8c9651..4f7999c7b44c 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> @@ -74,6 +74,7 @@ static struct devfreq_dev_profile panfrost_devfreq_profile = {
>  int panfrost_devfreq_init(struct panfrost_device *pfdev)
>  {
>  	int ret;
> +	struct opp_table *opp_table;
>  	struct dev_pm_opp *opp;
>  	unsigned long cur_freq;
>  	struct device *dev = &pfdev->pdev->dev;
> @@ -84,9 +85,24 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
>  		/* Optional, continue without devfreq */
>  		return 0;
>  
> +	opp_table = dev_pm_opp_set_regulators(dev,
> +					      (const char *[]){ "mali" },
> +					      1);
> +	if (IS_ERR(opp_table)) {
> +		ret = PTR_ERR(opp_table);
> +
> +		/* Continue if the optional regulator is missing */
> +		if (ret != -ENODEV)
> +			return ret;
> +	} else {
> +		pfdev->devfreq.regulators_opp_table = opp_table;
> +	}
> +
>  	ret = dev_pm_opp_of_add_table(dev);
> -	if (ret)
> +	if (ret) {
> +		dev_pm_opp_put_regulators(pfdev->devfreq.regulators_opp_table);

If we don't have a regulator then regulators_opp_table will be NULL and
sadly dev_pm_opp_put_regulators() doesn't handle a NULL argument. The
same applies to the two below calls obviously.

Steve

>  		return ret;
> +	}
>  
>  	panfrost_devfreq_reset(pfdev);
>  
> @@ -95,6 +111,7 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
>  	opp = devfreq_recommended_opp(dev, &cur_freq, 0);
>  	if (IS_ERR(opp)) {
>  		dev_pm_opp_of_remove_table(dev);
> +		dev_pm_opp_put_regulators(pfdev->devfreq.regulators_opp_table);
>  		return PTR_ERR(opp);
>  	}
>  
> @@ -106,6 +123,7 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
>  	if (IS_ERR(devfreq)) {
>  		DRM_DEV_ERROR(dev, "Couldn't initialize GPU devfreq\n");
>  		dev_pm_opp_of_remove_table(dev);
> +		dev_pm_opp_put_regulators(pfdev->devfreq.regulators_opp_table);
>  		return PTR_ERR(devfreq);
>  	}
>  	pfdev->devfreq.devfreq = devfreq;
> @@ -124,6 +142,8 @@ void panfrost_devfreq_fini(struct panfrost_device *pfdev)
>  	if (pfdev->devfreq.cooling)
>  		devfreq_cooling_unregister(pfdev->devfreq.cooling);
>  	dev_pm_opp_of_remove_table(&pfdev->pdev->dev);
> +	if (pfdev->devfreq.regulators_opp_table)
> +		dev_pm_opp_put_regulators(pfdev->devfreq.regulators_opp_table);
>  }
>  
>  void panfrost_devfreq_resume(struct panfrost_device *pfdev)
> diff --git a/drivers/gpu/drm/panfrost/panfrost_device.h b/drivers/gpu/drm/panfrost/panfrost_device.h
> index 06713811b92c..4878b239e301 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_device.h
> +++ b/drivers/gpu/drm/panfrost/panfrost_device.h
> @@ -85,6 +85,7 @@ struct panfrost_device {
>  
>  	struct {
>  		struct devfreq *devfreq;
> +		struct opp_table *regulators_opp_table;
>  		struct thermal_cooling_device *cooling;
>  		ktime_t busy_time;
>  		ktime_t idle_time;
> 

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH RFT v1 2/3] drm/panfrost: call dev_pm_opp_of_remove_table() in all error-paths
  2020-01-07 23:06 ` [PATCH RFT v1 2/3] drm/panfrost: call dev_pm_opp_of_remove_table() in all error-paths Martin Blumenstingl
@ 2020-01-09 11:31   ` Steven Price
  0 siblings, 0 replies; 12+ messages in thread
From: Steven Price @ 2020-01-09 11:31 UTC (permalink / raw)
  To: Martin Blumenstingl, dri-devel, alyssa, tomeu.vizoso, robh
  Cc: airlied, linux-rockchip, robin.murphy, linux-kernel, linux-amlogic

On 07/01/2020 23:06, Martin Blumenstingl wrote:
> If devfreq_recommended_opp() fails we need to undo
> dev_pm_opp_of_add_table() by calling dev_pm_opp_of_remove_table() (just
> like we do it in the other error-path below).
> 
> Fixes: f3ba91228e8e91 ("drm/panfrost: Add initial panfrost driver")
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

Reviewed-by: Steven Price <steven.price@arm.com>

> ---
>  drivers/gpu/drm/panfrost/panfrost_devfreq.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> index 1471588763ce..170f6c8c9651 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> @@ -93,8 +93,10 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
>  	cur_freq = clk_get_rate(pfdev->clock);
>  
>  	opp = devfreq_recommended_opp(dev, &cur_freq, 0);
> -	if (IS_ERR(opp))
> +	if (IS_ERR(opp)) {
> +		dev_pm_opp_of_remove_table(dev);
>  		return PTR_ERR(opp);
> +	}
>  
>  	panfrost_devfreq_profile.initial_freq = cur_freq;
>  	dev_pm_opp_put(opp);
> 

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH RFT v1 3/3] drm/panfrost: Use the mali-supply regulator for control again
  2020-01-09 11:31   ` Steven Price
@ 2020-01-09 17:27     ` Martin Blumenstingl
  2020-01-13 17:10       ` Steven Price
  0 siblings, 1 reply; 12+ messages in thread
From: Martin Blumenstingl @ 2020-01-09 17:27 UTC (permalink / raw)
  To: Steven Price
  Cc: tomeu.vizoso, airlied, linux-kernel, dri-devel, linux-rockchip,
	linux-amlogic, robin.murphy, alyssa

On Thu, Jan 9, 2020 at 12:31 PM Steven Price <steven.price@arm.com> wrote:
>
> On 07/01/2020 23:06, Martin Blumenstingl wrote:
> > dev_pm_opp_set_rate() needs a reference to the regulator which should be
> > updated when updating the GPU frequency. The name of the regulator has
> > to be passed at initialization-time using dev_pm_opp_set_regulators().
> > Add the call to dev_pm_opp_set_regulators() so dev_pm_opp_set_rate()
> > will update the GPU regulator when updating the frequency (just like
> > we did this manually before when we open-coded dev_pm_opp_set_rate()).
>
> This patch causes a warning from debugfs on my firefly (RK3288) board:
>
> debugfs: Directory 'ffa30000.gpu-mali' with parent 'vdd_gpu' already
> present!
>
> So it looks like the regulator is being added twice - but I haven't
> investigated further.
I *think* it's because the regulator is already fetched by the
panfrost driver itself to enable it
(the devfreq code currently does not support enabling the regulator,
it can only control the voltage)

I'm not sure what to do about this though

[...]
> >       ret = dev_pm_opp_of_add_table(dev);
> > -     if (ret)
> > +     if (ret) {
> > +             dev_pm_opp_put_regulators(pfdev->devfreq.regulators_opp_table);
>
> If we don't have a regulator then regulators_opp_table will be NULL and
> sadly dev_pm_opp_put_regulators() doesn't handle a NULL argument. The
> same applies to the two below calls obviously.
good catch, thank you!
are you happy with the general approach here or do you think that
dev_pm_opp_set_regulators is the wrong way to go (for whatever
reason)?


Martin
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH RFT v1 3/3] drm/panfrost: Use the mali-supply regulator for control again
  2020-01-09 17:27     ` Martin Blumenstingl
@ 2020-01-13 17:10       ` Steven Price
  2020-01-14 20:21         ` Martin Blumenstingl
  0 siblings, 1 reply; 12+ messages in thread
From: Steven Price @ 2020-01-13 17:10 UTC (permalink / raw)
  To: Martin Blumenstingl
  Cc: tomeu.vizoso, airlied, linux-kernel, dri-devel, linux-rockchip,
	linux-amlogic, robin.murphy, alyssa

On 09/01/2020 17:27, Martin Blumenstingl wrote:
> On Thu, Jan 9, 2020 at 12:31 PM Steven Price <steven.price@arm.com> wrote:
>>
>> On 07/01/2020 23:06, Martin Blumenstingl wrote:
>>> dev_pm_opp_set_rate() needs a reference to the regulator which should be
>>> updated when updating the GPU frequency. The name of the regulator has
>>> to be passed at initialization-time using dev_pm_opp_set_regulators().
>>> Add the call to dev_pm_opp_set_regulators() so dev_pm_opp_set_rate()
>>> will update the GPU regulator when updating the frequency (just like
>>> we did this manually before when we open-coded dev_pm_opp_set_rate()).
>>
>> This patch causes a warning from debugfs on my firefly (RK3288) board:
>>
>> debugfs: Directory 'ffa30000.gpu-mali' with parent 'vdd_gpu' already
>> present!
>>
>> So it looks like the regulator is being added twice - but I haven't
>> investigated further.
> I *think* it's because the regulator is already fetched by the
> panfrost driver itself to enable it
> (the devfreq code currently does not support enabling the regulator,
> it can only control the voltage)
> 
> I'm not sure what to do about this though

Having a little play around with this, I think you can simply remove the
panfrost_regulator_init() call. This at least works for me - the call to
dev_pm_opp_set_regulators() seems to set everything up. However I
suspect you need to do this unconditionally even if there are no
operating points defined.

> [...]
>>>       ret = dev_pm_opp_of_add_table(dev);
>>> -     if (ret)
>>> +     if (ret) {
>>> +             dev_pm_opp_put_regulators(pfdev->devfreq.regulators_opp_table);
>>
>> If we don't have a regulator then regulators_opp_table will be NULL and
>> sadly dev_pm_opp_put_regulators() doesn't handle a NULL argument. The
>> same applies to the two below calls obviously.
> good catch, thank you!
> are you happy with the general approach here or do you think that
> dev_pm_opp_set_regulators is the wrong way to go (for whatever
> reason)?

To be honest this is an area I still don't fully understand. There's a
lot of magic helper functions and very little in the way of helpful
documentation to work out which are the right ones to call. It seems
reasonable to me, hopefully someone more in the know will chime in it
there's something fundamentally wrong!

Thanks,

Steve
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH RFT v1 3/3] drm/panfrost: Use the mali-supply regulator for control again
  2020-01-13 17:10       ` Steven Price
@ 2020-01-14 20:21         ` Martin Blumenstingl
  0 siblings, 0 replies; 12+ messages in thread
From: Martin Blumenstingl @ 2020-01-14 20:21 UTC (permalink / raw)
  To: Steven Price
  Cc: tomeu.vizoso, airlied, linux-kernel, dri-devel, linux-rockchip,
	linux-amlogic, robin.murphy, alyssa

Hi Steven,

On Mon, Jan 13, 2020 at 6:10 PM Steven Price <steven.price@arm.com> wrote:
>
> On 09/01/2020 17:27, Martin Blumenstingl wrote:
> > On Thu, Jan 9, 2020 at 12:31 PM Steven Price <steven.price@arm.com> wrote:
> >>
> >> On 07/01/2020 23:06, Martin Blumenstingl wrote:
> >>> dev_pm_opp_set_rate() needs a reference to the regulator which should be
> >>> updated when updating the GPU frequency. The name of the regulator has
> >>> to be passed at initialization-time using dev_pm_opp_set_regulators().
> >>> Add the call to dev_pm_opp_set_regulators() so dev_pm_opp_set_rate()
> >>> will update the GPU regulator when updating the frequency (just like
> >>> we did this manually before when we open-coded dev_pm_opp_set_rate()).
> >>
> >> This patch causes a warning from debugfs on my firefly (RK3288) board:
> >>
> >> debugfs: Directory 'ffa30000.gpu-mali' with parent 'vdd_gpu' already
> >> present!
> >>
> >> So it looks like the regulator is being added twice - but I haven't
> >> investigated further.
> > I *think* it's because the regulator is already fetched by the
> > panfrost driver itself to enable it
> > (the devfreq code currently does not support enabling the regulator,
> > it can only control the voltage)
> >
> > I'm not sure what to do about this though
>
> Having a little play around with this, I think you can simply remove the
> panfrost_regulator_init() call. This at least works for me - the call to
> dev_pm_opp_set_regulators() seems to set everything up. However I
> suspect you need to do this unconditionally even if there are no
> operating points defined.
I'm not sure if I can safely remove panfrost_regulator_init() because
it calls regulator_enable()
but there's no regulator_enable() equivalent in devfreq or OPP

I'm not sure how this is supposed to work
if someone has an idea: please let me know

> > [...]
> >>>       ret = dev_pm_opp_of_add_table(dev);
> >>> -     if (ret)
> >>> +     if (ret) {
> >>> +             dev_pm_opp_put_regulators(pfdev->devfreq.regulators_opp_table);
> >>
> >> If we don't have a regulator then regulators_opp_table will be NULL and
> >> sadly dev_pm_opp_put_regulators() doesn't handle a NULL argument. The
> >> same applies to the two below calls obviously.
> > good catch, thank you!
> > are you happy with the general approach here or do you think that
> > dev_pm_opp_set_regulators is the wrong way to go (for whatever
> > reason)?
>
> To be honest this is an area I still don't fully understand. There's a
> lot of magic helper functions and very little in the way of helpful
> documentation to work out which are the right ones to call. It seems
> reasonable to me, hopefully someone more in the know will chime in it
> there's something fundamentally wrong!
OK, if you know anybody who could help then please Cc them


Martin
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, back to index

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-07 23:06 [PATCH RFT v1 0/3] devfreq fixes for panfrost Martin Blumenstingl
2020-01-07 23:06 ` [PATCH RFT v1 1/3] drm/panfrost: enable devfreq based the "operating-points-v2" property Martin Blumenstingl
2020-01-08 11:18   ` Robin Murphy
2020-01-08 12:38     ` Martin Blumenstingl
2020-01-08 14:20       ` Robin Murphy
2020-01-07 23:06 ` [PATCH RFT v1 2/3] drm/panfrost: call dev_pm_opp_of_remove_table() in all error-paths Martin Blumenstingl
2020-01-09 11:31   ` Steven Price
2020-01-07 23:06 ` [PATCH RFT v1 3/3] drm/panfrost: Use the mali-supply regulator for control again Martin Blumenstingl
2020-01-09 11:31   ` Steven Price
2020-01-09 17:27     ` Martin Blumenstingl
2020-01-13 17:10       ` Steven Price
2020-01-14 20:21         ` Martin Blumenstingl

dri-devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dri-devel/0 dri-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dri-devel dri-devel/ https://lore.kernel.org/dri-devel \
		dri-devel@lists.freedesktop.org
	public-inbox-index dri-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.dri-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git