[PATCH v2 0/4] drm/msm: use firmware-name to find zap fw

[PATCH v2 0/4] drm/msm: use firmware-name to find zap fw

[Rob Clark]

From: Rob Clark <robdclark@chromium.org>

For devices which use zap fw to take the GPU out of secure mode on
reset, the firmware is likely to be signed with a device specific key.
Meaning that we can't have a single filesystem (or /lib/firmware) that
works on multiple devices.

So allow a firmware-name to be specified in the zap-shader node in dt.
This moves the zap-shader node out of the core sdm845.dtsi and into per-
device dts files.  Which also removes the need for /delete-node/ in
sdm845-cheza.dtsi (as cheza devices do not use zap).

This aligns with how Bjorn has been handling the similar situation with
adsp/cdsp/mpss fw:

   https://patchwork.kernel.org/patch/11160089/

Rob Clark (4):
  drm/msm: support firmware-name for zap fw (v2)
  drm/msm: allow zapfw to not be specified in gpulist
  dt-bindings: drm/msm/gpu: Document firmware-name
  arm64: dts: sdm845: move gpu zap nodes to per-device dts

 .../devicetree/bindings/display/msm/gpu.txt   |  3 ++
 arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi    |  1 -
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts    |  7 +++
 arch/arm64/boot/dts/qcom/sdm845-mtp.dts       |  7 +++
 arch/arm64/boot/dts/qcom/sdm845.dtsi          |  6 +--
 .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts |  7 +++
 drivers/gpu/drm/msm/adreno/adreno_gpu.c       | 50 +++++++++++++++----
 7 files changed, 64 insertions(+), 17 deletions(-)

-- 
2.24.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 1/4] drm/msm: support firmware-name for zap fw (v2)

[Rob Clark]

From: Rob Clark <robdclark@chromium.org>

Since zap firmware can be device specific, allow for a firmware-name
property in the zap node to specify which firmware to load, similarly to
the scheme used for dsp/wifi/etc.

v2: only need a single error msg when we can't load from firmware-name
    specified path, and fix comment [Bjorn A.]

Signed-off-by: Rob Clark <robdclark@chromium.org>
---
 drivers/gpu/drm/msm/adreno/adreno_gpu.c | 30 ++++++++++++++++++++++---
 1 file changed, 27 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
index 112e8b8a261e..456bb5af1717 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
@@ -26,6 +26,7 @@ static int zap_shader_load_mdt(struct msm_gpu *gpu, const char *fwname,
 {
 	struct device *dev = &gpu->pdev->dev;
 	const struct firmware *fw;
+	const char *signed_fwname = NULL;
 	struct device_node *np, *mem_np;
 	struct resource r;
 	phys_addr_t mem_phys;
@@ -58,8 +59,31 @@ static int zap_shader_load_mdt(struct msm_gpu *gpu, const char *fwname,
 
 	mem_phys = r.start;
 
-	/* Request the MDT file for the firmware */
-	fw = adreno_request_fw(to_adreno_gpu(gpu), fwname);
+	/*
+	 * Check for a firmware-name property.  This is the new scheme
+	 * to handle firmware that may be signed with device specific
+	 * keys, allowing us to have a different zap fw path for different
+	 * devices.
+	 *
+	 * If the firmware-name property is found, we bypass the
+	 * adreno_request_fw() mechanism, because we don't need to handle
+	 * the /lib/firmware/qcom/* vs /lib/firmware/* case.
+	 *
+	 * If the firmware-name property is not found, for backwards
+	 * compatibility we fall back to the fwname from the gpulist
+	 * table.
+	 */
+	of_property_read_string_index(np, "firmware-name", 0, &signed_fwname);
+	if (signed_fwname) {
+		fwname = signed_fwname;
+		ret = request_firmware_direct(&fw, fwname, gpu->dev->dev);
+		if (ret)
+			fw = ERR_PTR(ret);
+	} else {
+		/* Request the MDT file from the default location: */
+		fw = adreno_request_fw(to_adreno_gpu(gpu), fwname);
+	}
+
 	if (IS_ERR(fw)) {
 		DRM_DEV_ERROR(dev, "Unable to load %s\n", fwname);
 		return PTR_ERR(fw);
@@ -95,7 +119,7 @@ static int zap_shader_load_mdt(struct msm_gpu *gpu, const char *fwname,
 	 * not.  But since we've already gotten through adreno_request_fw()
 	 * we know which of the two cases it is:
 	 */
-	if (to_adreno_gpu(gpu)->fwloc == FW_LOCATION_LEGACY) {
+	if (signed_fwname || (to_adreno_gpu(gpu)->fwloc == FW_LOCATION_LEGACY)) {
 		ret = qcom_mdt_load(dev, fw, fwname, pasid,
 				mem_region, mem_phys, mem_size, NULL);
 	} else {
-- 
2.24.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 2/4] drm/msm: allow zapfw to not be specified in gpulist

[Rob Clark]

From: Rob Clark <robdclark@chromium.org>

For newer devices we want to require the path to come from the
firmware-name property in the zap-shader dt node.

Signed-off-by: Rob Clark <robdclark@chromium.org>
---
 drivers/gpu/drm/msm/adreno/adreno_gpu.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
index 456bb5af1717..c146c3b8f52b 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
@@ -79,9 +79,21 @@ static int zap_shader_load_mdt(struct msm_gpu *gpu, const char *fwname,
 		ret = request_firmware_direct(&fw, fwname, gpu->dev->dev);
 		if (ret)
 			fw = ERR_PTR(ret);
-	} else {
+	} else if (fwname) {
 		/* Request the MDT file from the default location: */
 		fw = adreno_request_fw(to_adreno_gpu(gpu), fwname);
+	} else {
+		/*
+		 * For new targets, we require the firmware-name property,
+		 * if a zap-shader is required, rather than falling back
+		 * to a firmware name specified in gpulist.
+		 *
+		 * Because the firmware is signed with a (potentially)
+		 * device specific key, having the name come from gpulist
+		 * was a bad idea, and is only provided for backwards
+		 * compatibility for older targets.
+		 */
+		return -ENODEV;
 	}
 
 	if (IS_ERR(fw)) {
@@ -170,14 +182,6 @@ int adreno_zap_shader_load(struct msm_gpu *gpu, u32 pasid)
 		return -EPROBE_DEFER;
 	}
 
-	/* Each GPU has a target specific zap shader firmware name to use */
-	if (!adreno_gpu->info->zapfw) {
-		zap_available = false;
-		DRM_DEV_ERROR(&pdev->dev,
-			"Zap shader firmware file not specified for this target\n");
-		return -ENODEV;
-	}
-
 	return zap_shader_load_mdt(gpu, adreno_gpu->info->zapfw, pasid);
 }
 
-- 
2.24.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 3/4] dt-bindings: drm/msm/gpu: Document firmware-name

[Rob Clark]

From: Rob Clark <robdclark@chromium.org>

The firmware-name property in the zap node can be used to specify a
device specific zap firmware.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 Documentation/devicetree/bindings/display/msm/gpu.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt
index 3e6cd3f64a78..7edc298a15f2 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/gpu.txt
@@ -33,6 +33,8 @@ Required properties:
 - zap-shader: For a5xx and a6xx devices this node contains a memory-region that
   points to reserved memory to store the zap shader that can be used to help
   bring the GPU out of secure mode.
+- firmware-name: optional property of the 'zap-shader' node, listing the
+  relative path of the device specific zap firmware.
 
 Example 3xx/4xx/a5xx:
 
@@ -85,6 +87,7 @@ Example a6xx (with GMU):
 
 		zap-shader {
 			memory-region = <&zap_shader_region>;
+			firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"
 		};
 	};
 };
-- 
2.24.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 4/4] arm64: dts: sdm845: move gpu zap nodes to per-device dts

[Rob Clark]

From: Rob Clark <robdclark@chromium.org>

We want to specify per-device firmware-name, so move the zap node into
the .dts file for individual boards/devices.  This lets us get rid of
the /delete-node/ for cheza, which does not use zap.

Signed-off-by: Rob Clark <robdclark@chromium.org>
---
v2: use 'sdm845' for subdir for devices that use test-key signed fw

 arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi           | 1 -
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts           | 7 +++++++
 arch/arm64/boot/dts/qcom/sdm845-mtp.dts              | 7 +++++++
 arch/arm64/boot/dts/qcom/sdm845.dtsi                 | 6 +-----
 arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 7 +++++++
 5 files changed, 22 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index 9a4ff57fc877..2db79c1ecdac 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -165,7 +165,6 @@ panel_in_edp: endpoint {
 /delete-node/ &venus_mem;
 /delete-node/ &cdsp_mem;
 /delete-node/ &cdsp_pas;
-/delete-node/ &zap_shader;
 /delete-node/ &gpu_mem;
 
 /* Increase the size from 120 MB to 128 MB */
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index d100f46791a6..6cd9201ffbbd 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -352,6 +352,13 @@ &gcc {
 			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
 };
 
+&gpu {
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/a630_zap.mbn";
+	};
+};
+
 &pm8998_gpio {
 	vol_up_pin_a: vol-up-active {
 		pins = "gpio6";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index c57548b7b250..09ad37b0dd71 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -360,6 +360,13 @@ &gcc {
 			   <GCC_LPASS_SWAY_CLK>;
 };
 
+&gpu {
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/a630_zap.mbn";
+	};
+};
+
 &i2c10 {
 	status = "okay";
 	clock-frequency = <400000>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index ddb1f23c936f..601c57cc9b6d 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2804,7 +2804,7 @@ dsi1_phy: dsi-phy@ae96400 {
 			};
 		};
 
-		gpu@5000000 {
+		gpu: gpu@5000000 {
 			compatible = "qcom,adreno-630.2", "qcom,adreno";
 			#stream-id-cells = <16>;
 
@@ -2824,10 +2824,6 @@ gpu@5000000 {
 
 			qcom,gmu = <&gmu>;
 
-			zap_shader: zap-shader {
-				memory-region = <&gpu_mem>;
-			};
-
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 13dc619687f3..b255be3a4a0a 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -245,6 +245,13 @@ &gcc {
 			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
 };
 
+&gpu {
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn";
+	};
+};
+
 &i2c1 {
 	status = "okay";
 	clock-frequency = <400000>;
-- 
2.24.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 1/4] drm/msm: support firmware-name for zap fw (v2)

[Jordan Crouse]

On Sun, Jan 12, 2020 at 11:53:57AM -0800, Rob Clark wrote:
> From: Rob Clark <robdclark@chromium.org>
> 
> Since zap firmware can be device specific, allow for a firmware-name
> property in the zap node to specify which firmware to load, similarly to
> the scheme used for dsp/wifi/etc.
> 
> v2: only need a single error msg when we can't load from firmware-name
>     specified path, and fix comment [Bjorn A.]

Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>

> Signed-off-by: Rob Clark <robdclark@chromium.org>
> ---
>  drivers/gpu/drm/msm/adreno/adreno_gpu.c | 30 ++++++++++++++++++++++---
>  1 file changed, 27 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
> index 112e8b8a261e..456bb5af1717 100644
> --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
> +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
> @@ -26,6 +26,7 @@ static int zap_shader_load_mdt(struct msm_gpu *gpu, const char *fwname,
>  {
>  	struct device *dev = &gpu->pdev->dev;
>  	const struct firmware *fw;
> +	const char *signed_fwname = NULL;
>  	struct device_node *np, *mem_np;
>  	struct resource r;
>  	phys_addr_t mem_phys;
> @@ -58,8 +59,31 @@ static int zap_shader_load_mdt(struct msm_gpu *gpu, const char *fwname,
>  
>  	mem_phys = r.start;
>  
> -	/* Request the MDT file for the firmware */
> -	fw = adreno_request_fw(to_adreno_gpu(gpu), fwname);
> +	/*
> +	 * Check for a firmware-name property.  This is the new scheme
> +	 * to handle firmware that may be signed with device specific
> +	 * keys, allowing us to have a different zap fw path for different
> +	 * devices.
> +	 *
> +	 * If the firmware-name property is found, we bypass the
> +	 * adreno_request_fw() mechanism, because we don't need to handle
> +	 * the /lib/firmware/qcom/* vs /lib/firmware/* case.
> +	 *
> +	 * If the firmware-name property is not found, for backwards
> +	 * compatibility we fall back to the fwname from the gpulist
> +	 * table.
> +	 */
> +	of_property_read_string_index(np, "firmware-name", 0, &signed_fwname);
> +	if (signed_fwname) {
> +		fwname = signed_fwname;
> +		ret = request_firmware_direct(&fw, fwname, gpu->dev->dev);
> +		if (ret)
> +			fw = ERR_PTR(ret);
> +	} else {
> +		/* Request the MDT file from the default location: */
> +		fw = adreno_request_fw(to_adreno_gpu(gpu), fwname);
> +	}
> +
>  	if (IS_ERR(fw)) {
>  		DRM_DEV_ERROR(dev, "Unable to load %s\n", fwname);
>  		return PTR_ERR(fw);
> @@ -95,7 +119,7 @@ static int zap_shader_load_mdt(struct msm_gpu *gpu, const char *fwname,
>  	 * not.  But since we've already gotten through adreno_request_fw()
>  	 * we know which of the two cases it is:
>  	 */
> -	if (to_adreno_gpu(gpu)->fwloc == FW_LOCATION_LEGACY) {
> +	if (signed_fwname || (to_adreno_gpu(gpu)->fwloc == FW_LOCATION_LEGACY)) {
>  		ret = qcom_mdt_load(dev, fw, fwname, pasid,
>  				mem_region, mem_phys, mem_size, NULL);
>  	} else {
> -- 
> 2.24.1
> 

-- 
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 2/4] drm/msm: allow zapfw to not be specified in gpulist

[Jordan Crouse]

On Sun, Jan 12, 2020 at 11:53:58AM -0800, Rob Clark wrote:
> From: Rob Clark <robdclark@chromium.org>
> 
> For newer devices we want to require the path to come from the
> firmware-name property in the zap-shader dt node.

Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>

> Signed-off-by: Rob Clark <robdclark@chromium.org>
> ---
>  drivers/gpu/drm/msm/adreno/adreno_gpu.c | 22 +++++++++++++---------
>  1 file changed, 13 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
> index 456bb5af1717..c146c3b8f52b 100644
> --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
> +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
> @@ -79,9 +79,21 @@ static int zap_shader_load_mdt(struct msm_gpu *gpu, const char *fwname,
>  		ret = request_firmware_direct(&fw, fwname, gpu->dev->dev);
>  		if (ret)
>  			fw = ERR_PTR(ret);
> -	} else {
> +	} else if (fwname) {
>  		/* Request the MDT file from the default location: */
>  		fw = adreno_request_fw(to_adreno_gpu(gpu), fwname);
> +	} else {
> +		/*
> +		 * For new targets, we require the firmware-name property,
> +		 * if a zap-shader is required, rather than falling back
> +		 * to a firmware name specified in gpulist.
> +		 *
> +		 * Because the firmware is signed with a (potentially)
> +		 * device specific key, having the name come from gpulist
> +		 * was a bad idea, and is only provided for backwards
> +		 * compatibility for older targets.
> +		 */
> +		return -ENODEV;
>  	}

A possible future optimization would be to move a lot of this to the target
specific code but we can do that once we're sure that all the rest of the
fallout has bee militated.

>  
>  	if (IS_ERR(fw)) {
> @@ -170,14 +182,6 @@ int adreno_zap_shader_load(struct msm_gpu *gpu, u32 pasid)
>  		return -EPROBE_DEFER;
>  	}
>  
> -	/* Each GPU has a target specific zap shader firmware name to use */
> -	if (!adreno_gpu->info->zapfw) {
> -		zap_available = false;
> -		DRM_DEV_ERROR(&pdev->dev,
> -			"Zap shader firmware file not specified for this target\n");
> -		return -ENODEV;
> -	}
> -
>  	return zap_shader_load_mdt(gpu, adreno_gpu->info->zapfw, pasid);
>  }
>  
> -- 
> 2.24.1
> 

-- 
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 4/4] arm64: dts: sdm845: move gpu zap nodes to per-device dts

[Bjorn Andersson]

On Sun 12 Jan 11:54 PST 2020, Rob Clark wrote:

> From: Rob Clark <robdclark@chromium.org>
> 
> We want to specify per-device firmware-name, so move the zap node into
> the .dts file for individual boards/devices.  This lets us get rid of
> the /delete-node/ for cheza, which does not use zap.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> Signed-off-by: Rob Clark <robdclark@chromium.org>
> ---
> v2: use 'sdm845' for subdir for devices that use test-key signed fw
> 
>  arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi           | 1 -
>  arch/arm64/boot/dts/qcom/sdm845-db845c.dts           | 7 +++++++
>  arch/arm64/boot/dts/qcom/sdm845-mtp.dts              | 7 +++++++
>  arch/arm64/boot/dts/qcom/sdm845.dtsi                 | 6 +-----
>  arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 7 +++++++
>  5 files changed, 22 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
> index 9a4ff57fc877..2db79c1ecdac 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
> @@ -165,7 +165,6 @@ panel_in_edp: endpoint {
>  /delete-node/ &venus_mem;
>  /delete-node/ &cdsp_mem;
>  /delete-node/ &cdsp_pas;
> -/delete-node/ &zap_shader;
>  /delete-node/ &gpu_mem;
>  
>  /* Increase the size from 120 MB to 128 MB */
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> index d100f46791a6..6cd9201ffbbd 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> @@ -352,6 +352,13 @@ &gcc {
>  			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
>  };
>  
> +&gpu {
> +	zap-shader {
> +		memory-region = <&gpu_mem>;
> +		firmware-name = "qcom/sdm845/a630_zap.mbn";
> +	};
> +};
> +
>  &pm8998_gpio {
>  	vol_up_pin_a: vol-up-active {
>  		pins = "gpio6";
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> index c57548b7b250..09ad37b0dd71 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> @@ -360,6 +360,13 @@ &gcc {
>  			   <GCC_LPASS_SWAY_CLK>;
>  };
>  
> +&gpu {
> +	zap-shader {
> +		memory-region = <&gpu_mem>;
> +		firmware-name = "qcom/sdm845/a630_zap.mbn";
> +	};
> +};
> +
>  &i2c10 {
>  	status = "okay";
>  	clock-frequency = <400000>;
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index ddb1f23c936f..601c57cc9b6d 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -2804,7 +2804,7 @@ dsi1_phy: dsi-phy@ae96400 {
>  			};
>  		};
>  
> -		gpu@5000000 {
> +		gpu: gpu@5000000 {
>  			compatible = "qcom,adreno-630.2", "qcom,adreno";
>  			#stream-id-cells = <16>;
>  
> @@ -2824,10 +2824,6 @@ gpu@5000000 {
>  
>  			qcom,gmu = <&gmu>;
>  
> -			zap_shader: zap-shader {
> -				memory-region = <&gpu_mem>;
> -			};
> -
>  			gpu_opp_table: opp-table {
>  				compatible = "operating-points-v2";
>  
> diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
> index 13dc619687f3..b255be3a4a0a 100644
> --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
> @@ -245,6 +245,13 @@ &gcc {
>  			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
>  };
>  
> +&gpu {
> +	zap-shader {
> +		memory-region = <&gpu_mem>;
> +		firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn";
> +	};
> +};
> +
>  &i2c1 {
>  	status = "okay";
>  	clock-frequency = <400000>;
> -- 
> 2.24.1
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 1/4] drm/msm: support firmware-name for zap fw (v2)

[Bjorn Andersson]

On Sun 12 Jan 11:53 PST 2020, Rob Clark wrote:

> From: Rob Clark <robdclark@chromium.org>
> 
> Since zap firmware can be device specific, allow for a firmware-name
> property in the zap node to specify which firmware to load, similarly to
> the scheme used for dsp/wifi/etc.
> 
> v2: only need a single error msg when we can't load from firmware-name
>     specified path, and fix comment [Bjorn A.]
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> Signed-off-by: Rob Clark <robdclark@chromium.org>
> ---
>  drivers/gpu/drm/msm/adreno/adreno_gpu.c | 30 ++++++++++++++++++++++---
>  1 file changed, 27 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
> index 112e8b8a261e..456bb5af1717 100644
> --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
> +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
> @@ -26,6 +26,7 @@ static int zap_shader_load_mdt(struct msm_gpu *gpu, const char *fwname,
>  {
>  	struct device *dev = &gpu->pdev->dev;
>  	const struct firmware *fw;
> +	const char *signed_fwname = NULL;
>  	struct device_node *np, *mem_np;
>  	struct resource r;
>  	phys_addr_t mem_phys;
> @@ -58,8 +59,31 @@ static int zap_shader_load_mdt(struct msm_gpu *gpu, const char *fwname,
>  
>  	mem_phys = r.start;
>  
> -	/* Request the MDT file for the firmware */
> -	fw = adreno_request_fw(to_adreno_gpu(gpu), fwname);
> +	/*
> +	 * Check for a firmware-name property.  This is the new scheme
> +	 * to handle firmware that may be signed with device specific
> +	 * keys, allowing us to have a different zap fw path for different
> +	 * devices.
> +	 *
> +	 * If the firmware-name property is found, we bypass the
> +	 * adreno_request_fw() mechanism, because we don't need to handle
> +	 * the /lib/firmware/qcom/* vs /lib/firmware/* case.
> +	 *
> +	 * If the firmware-name property is not found, for backwards
> +	 * compatibility we fall back to the fwname from the gpulist
> +	 * table.
> +	 */
> +	of_property_read_string_index(np, "firmware-name", 0, &signed_fwname);
> +	if (signed_fwname) {
> +		fwname = signed_fwname;
> +		ret = request_firmware_direct(&fw, fwname, gpu->dev->dev);
> +		if (ret)
> +			fw = ERR_PTR(ret);
> +	} else {
> +		/* Request the MDT file from the default location: */
> +		fw = adreno_request_fw(to_adreno_gpu(gpu), fwname);
> +	}
> +
>  	if (IS_ERR(fw)) {
>  		DRM_DEV_ERROR(dev, "Unable to load %s\n", fwname);
>  		return PTR_ERR(fw);
> @@ -95,7 +119,7 @@ static int zap_shader_load_mdt(struct msm_gpu *gpu, const char *fwname,
>  	 * not.  But since we've already gotten through adreno_request_fw()
>  	 * we know which of the two cases it is:
>  	 */
> -	if (to_adreno_gpu(gpu)->fwloc == FW_LOCATION_LEGACY) {
> +	if (signed_fwname || (to_adreno_gpu(gpu)->fwloc == FW_LOCATION_LEGACY)) {
>  		ret = qcom_mdt_load(dev, fw, fwname, pasid,
>  				mem_region, mem_phys, mem_size, NULL);
>  	} else {
> -- 
> 2.24.1
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v2 2/4] drm/msm: allow zapfw to not be specified in gpulist

[Bjorn Andersson]

On Sun 12 Jan 11:53 PST 2020, Rob Clark wrote:

> From: Rob Clark <robdclark@chromium.org>
> 
> For newer devices we want to require the path to come from the
> firmware-name property in the zap-shader dt node.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> Signed-off-by: Rob Clark <robdclark@chromium.org>
> ---
>  drivers/gpu/drm/msm/adreno/adreno_gpu.c | 22 +++++++++++++---------
>  1 file changed, 13 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
> index 456bb5af1717..c146c3b8f52b 100644
> --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
> +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
> @@ -79,9 +79,21 @@ static int zap_shader_load_mdt(struct msm_gpu *gpu, const char *fwname,
>  		ret = request_firmware_direct(&fw, fwname, gpu->dev->dev);
>  		if (ret)
>  			fw = ERR_PTR(ret);
> -	} else {
> +	} else if (fwname) {
>  		/* Request the MDT file from the default location: */
>  		fw = adreno_request_fw(to_adreno_gpu(gpu), fwname);
> +	} else {
> +		/*
> +		 * For new targets, we require the firmware-name property,
> +		 * if a zap-shader is required, rather than falling back
> +		 * to a firmware name specified in gpulist.
> +		 *
> +		 * Because the firmware is signed with a (potentially)
> +		 * device specific key, having the name come from gpulist
> +		 * was a bad idea, and is only provided for backwards
> +		 * compatibility for older targets.
> +		 */
> +		return -ENODEV;
>  	}
>  
>  	if (IS_ERR(fw)) {
> @@ -170,14 +182,6 @@ int adreno_zap_shader_load(struct msm_gpu *gpu, u32 pasid)
>  		return -EPROBE_DEFER;
>  	}
>  
> -	/* Each GPU has a target specific zap shader firmware name to use */
> -	if (!adreno_gpu->info->zapfw) {
> -		zap_available = false;
> -		DRM_DEV_ERROR(&pdev->dev,
> -			"Zap shader firmware file not specified for this target\n");
> -		return -ENODEV;
> -	}
> -
>  	return zap_shader_load_mdt(gpu, adreno_gpu->info->zapfw, pasid);
>  }
>  
> -- 
> 2.24.1
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel