dri-devel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2] drm/dp: Add function to parse EDID descriptors for adaptive sync limits
@ 2020-01-08  0:32 Manasi Navare
  2020-01-08 18:46 ` Manasi Navare
                   ` (2 more replies)
  0 siblings, 3 replies; 12+ messages in thread
From: Manasi Navare @ 2020-01-08  0:32 UTC (permalink / raw)
  To: dri-devel; +Cc: Manasi Navare, Nicholas Kazlauskas

Adaptive Sync is a VESA feature so add a DRM core helper to parse
the EDID's detailed descritors to obtain the adaptive sync monitor range.
Store this info as part fo drm_display_info so it can be used
across all drivers.
This part of the code is stripped out of amdgpu's function
amdgpu_dm_update_freesync_caps() to make it generic and be used
across all DRM drivers

v2:
* Change vmin and vmax to use u8 (Ville)
* Dont store pixel clock since that is just a max dotclock
and not related to VRR mode (Manasi)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
Cc: Nicholas Kazlauskas <nicholas.kazluaskas@amd.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
---
 drivers/gpu/drm/drm_edid.c  | 51 +++++++++++++++++++++++++++++++++++++
 include/drm/drm_connector.h | 22 ++++++++++++++++
 include/drm/drm_edid.h      |  2 ++
 3 files changed, 75 insertions(+)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 99769d6c9f84..52781a0e708b 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -4880,6 +4880,54 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
 	}
 }
 
+void drm_get_adaptive_sync_limits(struct drm_connector *connector,
+				  const struct edid *edid)
+{
+	struct drm_display_info *info = &connector->display_info;
+	const struct detailed_timing *timing;
+	const struct detailed_non_pixel *data;
+	const struct detailed_data_monitor_range *range;
+	int i;
+
+	/*
+	 * Restrict Adaptive Sync only for dp and edp
+	 */
+	if (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort &&
+	    connector->connector_type != DRM_MODE_CONNECTOR_eDP)
+		return;
+
+	if (edid->version <= 1 && !(edid->version == 1 && edid->revision > 1))
+		return;
+
+	for (i = 0; i < 4; i++) {
+		timing  = &edid->detailed_timings[i];
+		data    = &timing->data.other_data;
+		range   = &data->data.range;
+		/*
+		 * Check if monitor has continuous frequency mode
+		 */
+		if (data->type != EDID_DETAIL_MONITOR_RANGE)
+			continue;
+		/*
+		 * Check for flag range limits only. If flag == 1 then
+		 * no additional timing information provided.
+		 * Default GTF, GTF Secondary curve and CVT are not
+		 * supported
+		 */
+		if (range->flags != 1)
+			continue;
+
+		info->adaptive_sync.min_vfreq = range->min_vfreq;
+		info->adaptive_sync.max_vfreq = range->max_vfreq;
+
+		DRM_DEBUG_KMS("Adaptive Sync refresh rate range is %d Hz - %d Hz\n",
+			      info->adaptive_sync.min_vfreq,
+			      info->adaptive_sync.max_vfreq);
+		break;
+	}
+}
+EXPORT_SYMBOL(drm_get_adaptive_sync_limits);
+
 /* A connector has no EDID information, so we've got no EDID to compute quirks from. Reset
  * all of the values which would have been set from EDID
  */
@@ -4901,6 +4949,7 @@ drm_reset_display_info(struct drm_connector *connector)
 	memset(&info->hdmi, 0, sizeof(info->hdmi));
 
 	info->non_desktop = 0;
+	memset(&info->adaptive_sync, 0, sizeof(info->adaptive_sync));
 }
 
 u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid)
@@ -4916,6 +4965,8 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi
 
 	info->non_desktop = !!(quirks & EDID_QUIRK_NON_DESKTOP);
 
+	drm_get_adaptive_sync_limits(connector, edid);
+
 	DRM_DEBUG_KMS("non_desktop set to %d\n", info->non_desktop);
 
 	if (edid->revision < 3)
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 221910948b37..77df404a2e01 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -254,6 +254,23 @@ enum drm_panel_orientation {
 	DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
 };
 
+/**
+ * struct drm_adaptive_sync_info - Panel's Adaptive Sync capabilities for
+ * &drm_display_info
+ *
+ * This struct is used to store a Panel's Adaptive Sync capabilities
+ * as parsed from EDID's detailed monitor range descriptor block.
+ *
+ * @min_vfreq: This is the min supported refresh rate in Hz from
+ *             EDID's detailed monitor range.
+ * @max_vfreq: This is the max supported refresh rate in Hz from
+ *             EDID's detailed monitor range
+ */
+struct drm_adaptive_sync_info {
+	u8 min_vfreq;
+	u8 max_vfreq;
+};
+
 /*
  * This is a consolidated colorimetry list supported by HDMI and
  * DP protocol standard. The respective connectors will register
@@ -465,6 +482,11 @@ struct drm_display_info {
 	 * @non_desktop: Non desktop display (HMD).
 	 */
 	bool non_desktop;
+
+	/**
+	 * @adaptive_sync: Adaptive Sync capabilities of the DP/eDP sink
+	 */
+	struct drm_adaptive_sync_info adaptive_sync;
 };
 
 int drm_display_info_set_bus_formats(struct drm_display_info *info,
diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index f0b03d401c27..b9a230aa3e69 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -503,4 +503,6 @@ void drm_edid_get_monitor_name(struct edid *edid, char *name,
 struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
 					   int hsize, int vsize, int fresh,
 					   bool rb);
+void drm_get_adaptive_sync_limits(struct drm_connector *connector,
+				  const struct edid *edid);
 #endif /* __DRM_EDID_H__ */
-- 
2.19.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v2] drm/dp: Add function to parse EDID descriptors for adaptive sync limits
  2020-01-08  0:32 [PATCH v2] drm/dp: Add function to parse EDID descriptors for adaptive sync limits Manasi Navare
@ 2020-01-08 18:46 ` Manasi Navare
  2020-01-09 13:08 ` Ville Syrjälä
  2020-01-09 15:24 ` Jani Nikula
  2 siblings, 0 replies; 12+ messages in thread
From: Manasi Navare @ 2020-01-08 18:46 UTC (permalink / raw)
  To: dri-devel; +Cc: Nicholas Kazlauskas

Ville, could you take a look at this patch?
I have tested this on the VRR monitor here and it does parse
the detailed monitor range correctly to expose the min and max vfreq.
Also I got rid of storing the pixel clock in the info->adaptive_sync_limits struct
since thats just themax dotclock and not related to adaptive sync limits really.

Harry, could you take a look at this patch as well? This can be used inside amdgpu
in several ways, it will automatically populate the drm_display_info during get_edid_modes
or this function can be called explicitly in amdgpu_dm_update_freesync_caps() so I would
leave the usage of this to you and Nicholas depending on what works better in your driver.

Regards
Manasi 

On Tue, Jan 07, 2020 at 04:32:08PM -0800, Manasi Navare wrote:
> Adaptive Sync is a VESA feature so add a DRM core helper to parse
> the EDID's detailed descritors to obtain the adaptive sync monitor range.
> Store this info as part fo drm_display_info so it can be used
> across all drivers.
> This part of the code is stripped out of amdgpu's function
> amdgpu_dm_update_freesync_caps() to make it generic and be used
> across all DRM drivers
> 
> v2:
> * Change vmin and vmax to use u8 (Ville)
> * Dont store pixel clock since that is just a max dotclock
> and not related to VRR mode (Manasi)
> 
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Harry Wentland <harry.wentland@amd.com>
> Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
> Cc: Nicholas Kazlauskas <nicholas.kazluaskas@amd.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
>  drivers/gpu/drm/drm_edid.c  | 51 +++++++++++++++++++++++++++++++++++++
>  include/drm/drm_connector.h | 22 ++++++++++++++++
>  include/drm/drm_edid.h      |  2 ++
>  3 files changed, 75 insertions(+)
> 
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index 99769d6c9f84..52781a0e708b 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -4880,6 +4880,54 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
>  	}
>  }
>  
> +void drm_get_adaptive_sync_limits(struct drm_connector *connector,
> +				  const struct edid *edid)
> +{
> +	struct drm_display_info *info = &connector->display_info;
> +	const struct detailed_timing *timing;
> +	const struct detailed_non_pixel *data;
> +	const struct detailed_data_monitor_range *range;
> +	int i;
> +
> +	/*
> +	 * Restrict Adaptive Sync only for dp and edp
> +	 */
> +	if (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort &&
> +	    connector->connector_type != DRM_MODE_CONNECTOR_eDP)
> +		return;
> +
> +	if (edid->version <= 1 && !(edid->version == 1 && edid->revision > 1))
> +		return;
> +
> +	for (i = 0; i < 4; i++) {
> +		timing  = &edid->detailed_timings[i];
> +		data    = &timing->data.other_data;
> +		range   = &data->data.range;
> +		/*
> +		 * Check if monitor has continuous frequency mode
> +		 */
> +		if (data->type != EDID_DETAIL_MONITOR_RANGE)
> +			continue;
> +		/*
> +		 * Check for flag range limits only. If flag == 1 then
> +		 * no additional timing information provided.
> +		 * Default GTF, GTF Secondary curve and CVT are not
> +		 * supported
> +		 */
> +		if (range->flags != 1)
> +			continue;
> +
> +		info->adaptive_sync.min_vfreq = range->min_vfreq;
> +		info->adaptive_sync.max_vfreq = range->max_vfreq;
> +
> +		DRM_DEBUG_KMS("Adaptive Sync refresh rate range is %d Hz - %d Hz\n",
> +			      info->adaptive_sync.min_vfreq,
> +			      info->adaptive_sync.max_vfreq);
> +		break;
> +	}
> +}
> +EXPORT_SYMBOL(drm_get_adaptive_sync_limits);
> +
>  /* A connector has no EDID information, so we've got no EDID to compute quirks from. Reset
>   * all of the values which would have been set from EDID
>   */
> @@ -4901,6 +4949,7 @@ drm_reset_display_info(struct drm_connector *connector)
>  	memset(&info->hdmi, 0, sizeof(info->hdmi));
>  
>  	info->non_desktop = 0;
> +	memset(&info->adaptive_sync, 0, sizeof(info->adaptive_sync));
>  }
>  
>  u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid)
> @@ -4916,6 +4965,8 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi
>  
>  	info->non_desktop = !!(quirks & EDID_QUIRK_NON_DESKTOP);
>  
> +	drm_get_adaptive_sync_limits(connector, edid);
> +
>  	DRM_DEBUG_KMS("non_desktop set to %d\n", info->non_desktop);
>  
>  	if (edid->revision < 3)
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index 221910948b37..77df404a2e01 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -254,6 +254,23 @@ enum drm_panel_orientation {
>  	DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
>  };
>  
> +/**
> + * struct drm_adaptive_sync_info - Panel's Adaptive Sync capabilities for
> + * &drm_display_info
> + *
> + * This struct is used to store a Panel's Adaptive Sync capabilities
> + * as parsed from EDID's detailed monitor range descriptor block.
> + *
> + * @min_vfreq: This is the min supported refresh rate in Hz from
> + *             EDID's detailed monitor range.
> + * @max_vfreq: This is the max supported refresh rate in Hz from
> + *             EDID's detailed monitor range
> + */
> +struct drm_adaptive_sync_info {
> +	u8 min_vfreq;
> +	u8 max_vfreq;
> +};
> +
>  /*
>   * This is a consolidated colorimetry list supported by HDMI and
>   * DP protocol standard. The respective connectors will register
> @@ -465,6 +482,11 @@ struct drm_display_info {
>  	 * @non_desktop: Non desktop display (HMD).
>  	 */
>  	bool non_desktop;
> +
> +	/**
> +	 * @adaptive_sync: Adaptive Sync capabilities of the DP/eDP sink
> +	 */
> +	struct drm_adaptive_sync_info adaptive_sync;
>  };
>  
>  int drm_display_info_set_bus_formats(struct drm_display_info *info,
> diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
> index f0b03d401c27..b9a230aa3e69 100644
> --- a/include/drm/drm_edid.h
> +++ b/include/drm/drm_edid.h
> @@ -503,4 +503,6 @@ void drm_edid_get_monitor_name(struct edid *edid, char *name,
>  struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
>  					   int hsize, int vsize, int fresh,
>  					   bool rb);
> +void drm_get_adaptive_sync_limits(struct drm_connector *connector,
> +				  const struct edid *edid);
>  #endif /* __DRM_EDID_H__ */
> -- 
> 2.19.1
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v2] drm/dp: Add function to parse EDID descriptors for adaptive sync limits
  2020-01-08  0:32 [PATCH v2] drm/dp: Add function to parse EDID descriptors for adaptive sync limits Manasi Navare
  2020-01-08 18:46 ` Manasi Navare
@ 2020-01-09 13:08 ` Ville Syrjälä
  2020-01-10 23:17   ` Manasi Navare
  2020-01-09 15:24 ` Jani Nikula
  2 siblings, 1 reply; 12+ messages in thread
From: Ville Syrjälä @ 2020-01-09 13:08 UTC (permalink / raw)
  To: Manasi Navare; +Cc: Nicholas Kazlauskas, dri-devel

On Tue, Jan 07, 2020 at 04:32:08PM -0800, Manasi Navare wrote:
> Adaptive Sync is a VESA feature so add a DRM core helper to parse
> the EDID's detailed descritors to obtain the adaptive sync monitor range.
> Store this info as part fo drm_display_info so it can be used
> across all drivers.
> This part of the code is stripped out of amdgpu's function
> amdgpu_dm_update_freesync_caps() to make it generic and be used
> across all DRM drivers
> 
> v2:
> * Change vmin and vmax to use u8 (Ville)
> * Dont store pixel clock since that is just a max dotclock
> and not related to VRR mode (Manasi)
> 
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Harry Wentland <harry.wentland@amd.com>
> Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
> Cc: Nicholas Kazlauskas <nicholas.kazluaskas@amd.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
>  drivers/gpu/drm/drm_edid.c  | 51 +++++++++++++++++++++++++++++++++++++
>  include/drm/drm_connector.h | 22 ++++++++++++++++
>  include/drm/drm_edid.h      |  2 ++
>  3 files changed, 75 insertions(+)
> 
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index 99769d6c9f84..52781a0e708b 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -4880,6 +4880,54 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
>  	}
>  }
>  
> +void drm_get_adaptive_sync_limits(struct drm_connector *connector,
> +				  const struct edid *edid)
> +{
> +	struct drm_display_info *info = &connector->display_info;
> +	const struct detailed_timing *timing;
> +	const struct detailed_non_pixel *data;
> +	const struct detailed_data_monitor_range *range;

Needlessly wide scope for everything above.

> +	int i;
> +
> +	/*
> +	 * Restrict Adaptive Sync only for dp and edp
> +	 */
> +	if (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort &&
> +	    connector->connector_type != DRM_MODE_CONNECTOR_eDP)
> +		return;
> +
> +	if (edid->version <= 1 && !(edid->version == 1 && edid->revision > 1))
> +		return;

if (!version_greater(...))
	return;

> +
> +	for (i = 0; i < 4; i++) {

This should probably use for_each_detailed_block()

> +		timing  = &edid->detailed_timings[i];
> +		data    = &timing->data.other_data;
> +		range   = &data->data.range;
> +		/*
> +		 * Check if monitor has continuous frequency mode
> +		 */
> +		if (data->type != EDID_DETAIL_MONITOR_RANGE)
> +			continue;
> +		/*
> +		 * Check for flag range limits only. If flag == 1 then
> +		 * no additional timing information provided.
> +		 * Default GTF, GTF Secondary curve and CVT are not
> +		 * supported
> +		 */
> +		if (range->flags != 1)
> +			continue;
> +
> +		info->adaptive_sync.min_vfreq = range->min_vfreq;
> +		info->adaptive_sync.max_vfreq = range->max_vfreq;
> +
> +		DRM_DEBUG_KMS("Adaptive Sync refresh rate range is %d Hz - %d Hz\n",
> +			      info->adaptive_sync.min_vfreq,
> +			      info->adaptive_sync.max_vfreq);
> +		break;
> +	}
> +}
> +EXPORT_SYMBOL(drm_get_adaptive_sync_limits);
> +
>  /* A connector has no EDID information, so we've got no EDID to compute quirks from. Reset
>   * all of the values which would have been set from EDID
>   */
> @@ -4901,6 +4949,7 @@ drm_reset_display_info(struct drm_connector *connector)
>  	memset(&info->hdmi, 0, sizeof(info->hdmi));
>  
>  	info->non_desktop = 0;
> +	memset(&info->adaptive_sync, 0, sizeof(info->adaptive_sync));
>  }
>  
>  u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid)
> @@ -4916,6 +4965,8 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi
>  
>  	info->non_desktop = !!(quirks & EDID_QUIRK_NON_DESKTOP);
>  
> +	drm_get_adaptive_sync_limits(connector, edid);
> +
>  	DRM_DEBUG_KMS("non_desktop set to %d\n", info->non_desktop);
>  
>  	if (edid->revision < 3)
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index 221910948b37..77df404a2e01 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -254,6 +254,23 @@ enum drm_panel_orientation {
>  	DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
>  };
>  
> +/**
> + * struct drm_adaptive_sync_info - Panel's Adaptive Sync capabilities for
> + * &drm_display_info
> + *
> + * This struct is used to store a Panel's Adaptive Sync capabilities
> + * as parsed from EDID's detailed monitor range descriptor block.
> + *
> + * @min_vfreq: This is the min supported refresh rate in Hz from
> + *             EDID's detailed monitor range.
> + * @max_vfreq: This is the max supported refresh rate in Hz from
> + *             EDID's detailed monitor range
> + */
> +struct drm_adaptive_sync_info {
> +	u8 min_vfreq;
> +	u8 max_vfreq;
> +};
> +
>  /*
>   * This is a consolidated colorimetry list supported by HDMI and
>   * DP protocol standard. The respective connectors will register
> @@ -465,6 +482,11 @@ struct drm_display_info {
>  	 * @non_desktop: Non desktop display (HMD).
>  	 */
>  	bool non_desktop;
> +
> +	/**
> +	 * @adaptive_sync: Adaptive Sync capabilities of the DP/eDP sink
> +	 */
> +	struct drm_adaptive_sync_info adaptive_sync;
>  };
>  
>  int drm_display_info_set_bus_formats(struct drm_display_info *info,
> diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
> index f0b03d401c27..b9a230aa3e69 100644
> --- a/include/drm/drm_edid.h
> +++ b/include/drm/drm_edid.h
> @@ -503,4 +503,6 @@ void drm_edid_get_monitor_name(struct edid *edid, char *name,
>  struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
>  					   int hsize, int vsize, int fresh,
>  					   bool rb);
> +void drm_get_adaptive_sync_limits(struct drm_connector *connector,
> +				  const struct edid *edid);
>  #endif /* __DRM_EDID_H__ */
> -- 
> 2.19.1

-- 
Ville Syrjälä
Intel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v2] drm/dp: Add function to parse EDID descriptors for adaptive sync limits
  2020-01-08  0:32 [PATCH v2] drm/dp: Add function to parse EDID descriptors for adaptive sync limits Manasi Navare
  2020-01-08 18:46 ` Manasi Navare
  2020-01-09 13:08 ` Ville Syrjälä
@ 2020-01-09 15:24 ` Jani Nikula
  2020-01-10 22:43   ` Manasi Navare
  2 siblings, 1 reply; 12+ messages in thread
From: Jani Nikula @ 2020-01-09 15:24 UTC (permalink / raw)
  To: Manasi Navare, dri-devel; +Cc: Manasi Navare, Nicholas Kazlauskas

On Tue, 07 Jan 2020, Manasi Navare <manasi.d.navare@intel.com> wrote:
> Adaptive Sync is a VESA feature so add a DRM core helper to parse
> the EDID's detailed descritors to obtain the adaptive sync monitor range.
> Store this info as part fo drm_display_info so it can be used
> across all drivers.
> This part of the code is stripped out of amdgpu's function
> amdgpu_dm_update_freesync_caps() to make it generic and be used
> across all DRM drivers
>
> v2:
> * Change vmin and vmax to use u8 (Ville)
> * Dont store pixel clock since that is just a max dotclock
> and not related to VRR mode (Manasi)
>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Harry Wentland <harry.wentland@amd.com>
> Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
> Cc: Nicholas Kazlauskas <nicholas.kazluaskas@amd.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
>  drivers/gpu/drm/drm_edid.c  | 51 +++++++++++++++++++++++++++++++++++++
>  include/drm/drm_connector.h | 22 ++++++++++++++++
>  include/drm/drm_edid.h      |  2 ++
>  3 files changed, 75 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index 99769d6c9f84..52781a0e708b 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -4880,6 +4880,54 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
>  	}
>  }
>  
> +void drm_get_adaptive_sync_limits(struct drm_connector *connector,
> +				  const struct edid *edid)
> +{
> +	struct drm_display_info *info = &connector->display_info;
> +	const struct detailed_timing *timing;
> +	const struct detailed_non_pixel *data;
> +	const struct detailed_data_monitor_range *range;
> +	int i;
> +
> +	/*
> +	 * Restrict Adaptive Sync only for dp and edp
> +	 */
> +	if (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort &&
> +	    connector->connector_type != DRM_MODE_CONNECTOR_eDP)
> +		return;
> +
> +	if (edid->version <= 1 && !(edid->version == 1 && edid->revision > 1))
> +		return;
> +
> +	for (i = 0; i < 4; i++) {
> +		timing  = &edid->detailed_timings[i];
> +		data    = &timing->data.other_data;
> +		range   = &data->data.range;
> +		/*
> +		 * Check if monitor has continuous frequency mode
> +		 */
> +		if (data->type != EDID_DETAIL_MONITOR_RANGE)
> +			continue;
> +		/*
> +		 * Check for flag range limits only. If flag == 1 then
> +		 * no additional timing information provided.
> +		 * Default GTF, GTF Secondary curve and CVT are not
> +		 * supported
> +		 */
> +		if (range->flags != 1)
> +			continue;
> +
> +		info->adaptive_sync.min_vfreq = range->min_vfreq;
> +		info->adaptive_sync.max_vfreq = range->max_vfreq;
> +
> +		DRM_DEBUG_KMS("Adaptive Sync refresh rate range is %d Hz - %d Hz\n",
> +			      info->adaptive_sync.min_vfreq,
> +			      info->adaptive_sync.max_vfreq);
> +		break;
> +	}
> +}
> +EXPORT_SYMBOL(drm_get_adaptive_sync_limits);

Why the export? Rather, why is this not static?

BR,
Jani.

> +
>  /* A connector has no EDID information, so we've got no EDID to compute quirks from. Reset
>   * all of the values which would have been set from EDID
>   */
> @@ -4901,6 +4949,7 @@ drm_reset_display_info(struct drm_connector *connector)
>  	memset(&info->hdmi, 0, sizeof(info->hdmi));
>  
>  	info->non_desktop = 0;
> +	memset(&info->adaptive_sync, 0, sizeof(info->adaptive_sync));
>  }
>  
>  u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid)
> @@ -4916,6 +4965,8 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi
>  
>  	info->non_desktop = !!(quirks & EDID_QUIRK_NON_DESKTOP);
>  
> +	drm_get_adaptive_sync_limits(connector, edid);
> +
>  	DRM_DEBUG_KMS("non_desktop set to %d\n", info->non_desktop);
>  
>  	if (edid->revision < 3)
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index 221910948b37..77df404a2e01 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -254,6 +254,23 @@ enum drm_panel_orientation {
>  	DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
>  };
>  
> +/**
> + * struct drm_adaptive_sync_info - Panel's Adaptive Sync capabilities for
> + * &drm_display_info
> + *
> + * This struct is used to store a Panel's Adaptive Sync capabilities
> + * as parsed from EDID's detailed monitor range descriptor block.
> + *
> + * @min_vfreq: This is the min supported refresh rate in Hz from
> + *             EDID's detailed monitor range.
> + * @max_vfreq: This is the max supported refresh rate in Hz from
> + *             EDID's detailed monitor range
> + */
> +struct drm_adaptive_sync_info {
> +	u8 min_vfreq;
> +	u8 max_vfreq;
> +};
> +
>  /*
>   * This is a consolidated colorimetry list supported by HDMI and
>   * DP protocol standard. The respective connectors will register
> @@ -465,6 +482,11 @@ struct drm_display_info {
>  	 * @non_desktop: Non desktop display (HMD).
>  	 */
>  	bool non_desktop;
> +
> +	/**
> +	 * @adaptive_sync: Adaptive Sync capabilities of the DP/eDP sink
> +	 */
> +	struct drm_adaptive_sync_info adaptive_sync;
>  };
>  
>  int drm_display_info_set_bus_formats(struct drm_display_info *info,
> diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
> index f0b03d401c27..b9a230aa3e69 100644
> --- a/include/drm/drm_edid.h
> +++ b/include/drm/drm_edid.h
> @@ -503,4 +503,6 @@ void drm_edid_get_monitor_name(struct edid *edid, char *name,
>  struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
>  					   int hsize, int vsize, int fresh,
>  					   bool rb);
> +void drm_get_adaptive_sync_limits(struct drm_connector *connector,
> +				  const struct edid *edid);
>  #endif /* __DRM_EDID_H__ */

-- 
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v2] drm/dp: Add function to parse EDID descriptors for adaptive sync limits
  2020-01-09 15:24 ` Jani Nikula
@ 2020-01-10 22:43   ` Manasi Navare
  2020-01-14 13:31     ` Harry Wentland
  0 siblings, 1 reply; 12+ messages in thread
From: Manasi Navare @ 2020-01-10 22:43 UTC (permalink / raw)
  To: Jani Nikula; +Cc: Nicholas Kazlauskas, dri-devel

On Thu, Jan 09, 2020 at 05:24:30PM +0200, Jani Nikula wrote:
> On Tue, 07 Jan 2020, Manasi Navare <manasi.d.navare@intel.com> wrote:
> > Adaptive Sync is a VESA feature so add a DRM core helper to parse
> > the EDID's detailed descritors to obtain the adaptive sync monitor range.
> > Store this info as part fo drm_display_info so it can be used
> > across all drivers.
> > This part of the code is stripped out of amdgpu's function
> > amdgpu_dm_update_freesync_caps() to make it generic and be used
> > across all DRM drivers
> >
> > v2:
> > * Change vmin and vmax to use u8 (Ville)
> > * Dont store pixel clock since that is just a max dotclock
> > and not related to VRR mode (Manasi)
> >
> > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > Cc: Harry Wentland <harry.wentland@amd.com>
> > Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
> > Cc: Nicholas Kazlauskas <nicholas.kazluaskas@amd.com>
> > Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> > ---
> >  drivers/gpu/drm/drm_edid.c  | 51 +++++++++++++++++++++++++++++++++++++
> >  include/drm/drm_connector.h | 22 ++++++++++++++++
> >  include/drm/drm_edid.h      |  2 ++
> >  3 files changed, 75 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> > index 99769d6c9f84..52781a0e708b 100644
> > --- a/drivers/gpu/drm/drm_edid.c
> > +++ b/drivers/gpu/drm/drm_edid.c
> > @@ -4880,6 +4880,54 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
> >  	}
> >  }
> >  
> > +void drm_get_adaptive_sync_limits(struct drm_connector *connector,
> > +				  const struct edid *edid)
> > +{
> > +	struct drm_display_info *info = &connector->display_info;
> > +	const struct detailed_timing *timing;
> > +	const struct detailed_non_pixel *data;
> > +	const struct detailed_data_monitor_range *range;
> > +	int i;
> > +
> > +	/*
> > +	 * Restrict Adaptive Sync only for dp and edp
> > +	 */
> > +	if (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort &&
> > +	    connector->connector_type != DRM_MODE_CONNECTOR_eDP)
> > +		return;
> > +
> > +	if (edid->version <= 1 && !(edid->version == 1 && edid->revision > 1))
> > +		return;
> > +
> > +	for (i = 0; i < 4; i++) {
> > +		timing  = &edid->detailed_timings[i];
> > +		data    = &timing->data.other_data;
> > +		range   = &data->data.range;
> > +		/*
> > +		 * Check if monitor has continuous frequency mode
> > +		 */
> > +		if (data->type != EDID_DETAIL_MONITOR_RANGE)
> > +			continue;
> > +		/*
> > +		 * Check for flag range limits only. If flag == 1 then
> > +		 * no additional timing information provided.
> > +		 * Default GTF, GTF Secondary curve and CVT are not
> > +		 * supported
> > +		 */
> > +		if (range->flags != 1)
> > +			continue;
> > +
> > +		info->adaptive_sync.min_vfreq = range->min_vfreq;
> > +		info->adaptive_sync.max_vfreq = range->max_vfreq;
> > +
> > +		DRM_DEBUG_KMS("Adaptive Sync refresh rate range is %d Hz - %d Hz\n",
> > +			      info->adaptive_sync.min_vfreq,
> > +			      info->adaptive_sync.max_vfreq);
> > +		break;
> > +	}
> > +}
> > +EXPORT_SYMBOL(drm_get_adaptive_sync_limits);
> 
> Why the export? Rather, why is this not static?
>

I could make it static but since the way AMDGPU code is written right now they
would be calling this function explicitly to populate the vmin and vmax in their local
structs but I can make it static and with some minor refactoring they should be able to
use thsi infor directly from drm_display_info

Manasi
 
> BR,
> Jani.
> 
> > +
> >  /* A connector has no EDID information, so we've got no EDID to compute quirks from. Reset
> >   * all of the values which would have been set from EDID
> >   */
> > @@ -4901,6 +4949,7 @@ drm_reset_display_info(struct drm_connector *connector)
> >  	memset(&info->hdmi, 0, sizeof(info->hdmi));
> >  
> >  	info->non_desktop = 0;
> > +	memset(&info->adaptive_sync, 0, sizeof(info->adaptive_sync));
> >  }
> >  
> >  u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid)
> > @@ -4916,6 +4965,8 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi
> >  
> >  	info->non_desktop = !!(quirks & EDID_QUIRK_NON_DESKTOP);
> >  
> > +	drm_get_adaptive_sync_limits(connector, edid);
> > +
> >  	DRM_DEBUG_KMS("non_desktop set to %d\n", info->non_desktop);
> >  
> >  	if (edid->revision < 3)
> > diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> > index 221910948b37..77df404a2e01 100644
> > --- a/include/drm/drm_connector.h
> > +++ b/include/drm/drm_connector.h
> > @@ -254,6 +254,23 @@ enum drm_panel_orientation {
> >  	DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
> >  };
> >  
> > +/**
> > + * struct drm_adaptive_sync_info - Panel's Adaptive Sync capabilities for
> > + * &drm_display_info
> > + *
> > + * This struct is used to store a Panel's Adaptive Sync capabilities
> > + * as parsed from EDID's detailed monitor range descriptor block.
> > + *
> > + * @min_vfreq: This is the min supported refresh rate in Hz from
> > + *             EDID's detailed monitor range.
> > + * @max_vfreq: This is the max supported refresh rate in Hz from
> > + *             EDID's detailed monitor range
> > + */
> > +struct drm_adaptive_sync_info {
> > +	u8 min_vfreq;
> > +	u8 max_vfreq;
> > +};
> > +
> >  /*
> >   * This is a consolidated colorimetry list supported by HDMI and
> >   * DP protocol standard. The respective connectors will register
> > @@ -465,6 +482,11 @@ struct drm_display_info {
> >  	 * @non_desktop: Non desktop display (HMD).
> >  	 */
> >  	bool non_desktop;
> > +
> > +	/**
> > +	 * @adaptive_sync: Adaptive Sync capabilities of the DP/eDP sink
> > +	 */
> > +	struct drm_adaptive_sync_info adaptive_sync;
> >  };
> >  
> >  int drm_display_info_set_bus_formats(struct drm_display_info *info,
> > diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
> > index f0b03d401c27..b9a230aa3e69 100644
> > --- a/include/drm/drm_edid.h
> > +++ b/include/drm/drm_edid.h
> > @@ -503,4 +503,6 @@ void drm_edid_get_monitor_name(struct edid *edid, char *name,
> >  struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
> >  					   int hsize, int vsize, int fresh,
> >  					   bool rb);
> > +void drm_get_adaptive_sync_limits(struct drm_connector *connector,
> > +				  const struct edid *edid);
> >  #endif /* __DRM_EDID_H__ */
> 
> -- 
> Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v2] drm/dp: Add function to parse EDID descriptors for adaptive sync limits
  2020-01-09 13:08 ` Ville Syrjälä
@ 2020-01-10 23:17   ` Manasi Navare
  2020-01-14  0:39     ` Manasi Navare
  0 siblings, 1 reply; 12+ messages in thread
From: Manasi Navare @ 2020-01-10 23:17 UTC (permalink / raw)
  To: Ville Syrjälä; +Cc: Nicholas Kazlauskas, dri-devel

On Thu, Jan 09, 2020 at 03:08:52PM +0200, Ville Syrjälä wrote:
> On Tue, Jan 07, 2020 at 04:32:08PM -0800, Manasi Navare wrote:
> > Adaptive Sync is a VESA feature so add a DRM core helper to parse
> > the EDID's detailed descritors to obtain the adaptive sync monitor range.
> > Store this info as part fo drm_display_info so it can be used
> > across all drivers.
> > This part of the code is stripped out of amdgpu's function
> > amdgpu_dm_update_freesync_caps() to make it generic and be used
> > across all DRM drivers
> > 
> > v2:
> > * Change vmin and vmax to use u8 (Ville)
> > * Dont store pixel clock since that is just a max dotclock
> > and not related to VRR mode (Manasi)
> > 
> > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > Cc: Harry Wentland <harry.wentland@amd.com>
> > Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
> > Cc: Nicholas Kazlauskas <nicholas.kazluaskas@amd.com>
> > Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> > ---
> >  drivers/gpu/drm/drm_edid.c  | 51 +++++++++++++++++++++++++++++++++++++
> >  include/drm/drm_connector.h | 22 ++++++++++++++++
> >  include/drm/drm_edid.h      |  2 ++
> >  3 files changed, 75 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> > index 99769d6c9f84..52781a0e708b 100644
> > --- a/drivers/gpu/drm/drm_edid.c
> > +++ b/drivers/gpu/drm/drm_edid.c
> > @@ -4880,6 +4880,54 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
> >  	}
> >  }
> >  
> > +void drm_get_adaptive_sync_limits(struct drm_connector *connector,
> > +				  const struct edid *edid)
> > +{
> > +	struct drm_display_info *info = &connector->display_info;
> > +	const struct detailed_timing *timing;
> > +	const struct detailed_non_pixel *data;
> > +	const struct detailed_data_monitor_range *range;
> 
> Needlessly wide scope for everything above.

Okay will move inside the for_each loop ?

> 
> > +	int i;
> > +
> > +	/*
> > +	 * Restrict Adaptive Sync only for dp and edp
> > +	 */
> > +	if (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort &&
> > +	    connector->connector_type != DRM_MODE_CONNECTOR_eDP)
> > +		return;
> > +
> > +	if (edid->version <= 1 && !(edid->version == 1 && edid->revision > 1))
> > +		return;
> 
> if (!version_greater(...))
> 	return;

You mean simplify the condition or use define a function version_greater() to check this condition?

> 
> > +
> > +	for (i = 0; i < 4; i++) {
> 
> This should probably use for_each_detailed_block()
>


Ok yes will use for_each_detailed_block

Manasi

 
> > +		timing  = &edid->detailed_timings[i];
> > +		data    = &timing->data.other_data;
> > +		range   = &data->data.range;
> > +		/*
> > +		 * Check if monitor has continuous frequency mode
> > +		 */
> > +		if (data->type != EDID_DETAIL_MONITOR_RANGE)
> > +			continue;
> > +		/*
> > +		 * Check for flag range limits only. If flag == 1 then
> > +		 * no additional timing information provided.
> > +		 * Default GTF, GTF Secondary curve and CVT are not
> > +		 * supported
> > +		 */
> > +		if (range->flags != 1)
> > +			continue;
> > +
> > +		info->adaptive_sync.min_vfreq = range->min_vfreq;
> > +		info->adaptive_sync.max_vfreq = range->max_vfreq;
> > +
> > +		DRM_DEBUG_KMS("Adaptive Sync refresh rate range is %d Hz - %d Hz\n",
> > +			      info->adaptive_sync.min_vfreq,
> > +			      info->adaptive_sync.max_vfreq);
> > +		break;
> > +	}
> > +}
> > +EXPORT_SYMBOL(drm_get_adaptive_sync_limits);
> > +
> >  /* A connector has no EDID information, so we've got no EDID to compute quirks from. Reset
> >   * all of the values which would have been set from EDID
> >   */
> > @@ -4901,6 +4949,7 @@ drm_reset_display_info(struct drm_connector *connector)
> >  	memset(&info->hdmi, 0, sizeof(info->hdmi));
> >  
> >  	info->non_desktop = 0;
> > +	memset(&info->adaptive_sync, 0, sizeof(info->adaptive_sync));
> >  }
> >  
> >  u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid)
> > @@ -4916,6 +4965,8 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi
> >  
> >  	info->non_desktop = !!(quirks & EDID_QUIRK_NON_DESKTOP);
> >  
> > +	drm_get_adaptive_sync_limits(connector, edid);
> > +
> >  	DRM_DEBUG_KMS("non_desktop set to %d\n", info->non_desktop);
> >  
> >  	if (edid->revision < 3)
> > diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> > index 221910948b37..77df404a2e01 100644
> > --- a/include/drm/drm_connector.h
> > +++ b/include/drm/drm_connector.h
> > @@ -254,6 +254,23 @@ enum drm_panel_orientation {
> >  	DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
> >  };
> >  
> > +/**
> > + * struct drm_adaptive_sync_info - Panel's Adaptive Sync capabilities for
> > + * &drm_display_info
> > + *
> > + * This struct is used to store a Panel's Adaptive Sync capabilities
> > + * as parsed from EDID's detailed monitor range descriptor block.
> > + *
> > + * @min_vfreq: This is the min supported refresh rate in Hz from
> > + *             EDID's detailed monitor range.
> > + * @max_vfreq: This is the max supported refresh rate in Hz from
> > + *             EDID's detailed monitor range
> > + */
> > +struct drm_adaptive_sync_info {
> > +	u8 min_vfreq;
> > +	u8 max_vfreq;
> > +};
> > +
> >  /*
> >   * This is a consolidated colorimetry list supported by HDMI and
> >   * DP protocol standard. The respective connectors will register
> > @@ -465,6 +482,11 @@ struct drm_display_info {
> >  	 * @non_desktop: Non desktop display (HMD).
> >  	 */
> >  	bool non_desktop;
> > +
> > +	/**
> > +	 * @adaptive_sync: Adaptive Sync capabilities of the DP/eDP sink
> > +	 */
> > +	struct drm_adaptive_sync_info adaptive_sync;
> >  };
> >  
> >  int drm_display_info_set_bus_formats(struct drm_display_info *info,
> > diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
> > index f0b03d401c27..b9a230aa3e69 100644
> > --- a/include/drm/drm_edid.h
> > +++ b/include/drm/drm_edid.h
> > @@ -503,4 +503,6 @@ void drm_edid_get_monitor_name(struct edid *edid, char *name,
> >  struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
> >  					   int hsize, int vsize, int fresh,
> >  					   bool rb);
> > +void drm_get_adaptive_sync_limits(struct drm_connector *connector,
> > +				  const struct edid *edid);
> >  #endif /* __DRM_EDID_H__ */
> > -- 
> > 2.19.1
> 
> -- 
> Ville Syrjälä
> Intel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v2] drm/dp: Add function to parse EDID descriptors for adaptive sync limits
  2020-01-10 23:17   ` Manasi Navare
@ 2020-01-14  0:39     ` Manasi Navare
  2020-01-14 13:07       ` Ville Syrjälä
  0 siblings, 1 reply; 12+ messages in thread
From: Manasi Navare @ 2020-01-14  0:39 UTC (permalink / raw)
  To: Ville Syrjälä; +Cc: Nicholas Kazlauskas, dri-devel

Hi Ville,

So the two major changes you would like to see here are:

 use version_greate(edid) function 
and make use of :
drm_for_each_detailed_block() instead of the for loop.
But this function does not parse the monitor range yet so
you are suggesting modifying that dmr helper function as well?

Manasi

On Fri, Jan 10, 2020 at 03:17:43PM -0800, Manasi Navare wrote:
> On Thu, Jan 09, 2020 at 03:08:52PM +0200, Ville Syrjälä wrote:
> > On Tue, Jan 07, 2020 at 04:32:08PM -0800, Manasi Navare wrote:
> > > Adaptive Sync is a VESA feature so add a DRM core helper to parse
> > > the EDID's detailed descritors to obtain the adaptive sync monitor range.
> > > Store this info as part fo drm_display_info so it can be used
> > > across all drivers.
> > > This part of the code is stripped out of amdgpu's function
> > > amdgpu_dm_update_freesync_caps() to make it generic and be used
> > > across all DRM drivers
> > > 
> > > v2:
> > > * Change vmin and vmax to use u8 (Ville)
> > > * Dont store pixel clock since that is just a max dotclock
> > > and not related to VRR mode (Manasi)
> > > 
> > > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > > Cc: Harry Wentland <harry.wentland@amd.com>
> > > Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
> > > Cc: Nicholas Kazlauskas <nicholas.kazluaskas@amd.com>
> > > Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> > > ---
> > >  drivers/gpu/drm/drm_edid.c  | 51 +++++++++++++++++++++++++++++++++++++
> > >  include/drm/drm_connector.h | 22 ++++++++++++++++
> > >  include/drm/drm_edid.h      |  2 ++
> > >  3 files changed, 75 insertions(+)
> > > 
> > > diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> > > index 99769d6c9f84..52781a0e708b 100644
> > > --- a/drivers/gpu/drm/drm_edid.c
> > > +++ b/drivers/gpu/drm/drm_edid.c
> > > @@ -4880,6 +4880,54 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
> > >  	}
> > >  }
> > >  
> > > +void drm_get_adaptive_sync_limits(struct drm_connector *connector,
> > > +				  const struct edid *edid)
> > > +{
> > > +	struct drm_display_info *info = &connector->display_info;
> > > +	const struct detailed_timing *timing;
> > > +	const struct detailed_non_pixel *data;
> > > +	const struct detailed_data_monitor_range *range;
> > 
> > Needlessly wide scope for everything above.
> 
> Okay will move inside the for_each loop ?
> 
> > 
> > > +	int i;
> > > +
> > > +	/*
> > > +	 * Restrict Adaptive Sync only for dp and edp
> > > +	 */
> > > +	if (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort &&
> > > +	    connector->connector_type != DRM_MODE_CONNECTOR_eDP)
> > > +		return;
> > > +
> > > +	if (edid->version <= 1 && !(edid->version == 1 && edid->revision > 1))
> > > +		return;
> > 
> > if (!version_greater(...))
> > 	return;
> 
> You mean simplify the condition or use define a function version_greater() to check this condition?
> 
> > 
> > > +
> > > +	for (i = 0; i < 4; i++) {
> > 
> > This should probably use for_each_detailed_block()
> >
> 
> 
> Ok yes will use for_each_detailed_block
> 
> Manasi
> 
>  
> > > +		timing  = &edid->detailed_timings[i];
> > > +		data    = &timing->data.other_data;
> > > +		range   = &data->data.range;
> > > +		/*
> > > +		 * Check if monitor has continuous frequency mode
> > > +		 */
> > > +		if (data->type != EDID_DETAIL_MONITOR_RANGE)
> > > +			continue;
> > > +		/*
> > > +		 * Check for flag range limits only. If flag == 1 then
> > > +		 * no additional timing information provided.
> > > +		 * Default GTF, GTF Secondary curve and CVT are not
> > > +		 * supported
> > > +		 */
> > > +		if (range->flags != 1)
> > > +			continue;
> > > +
> > > +		info->adaptive_sync.min_vfreq = range->min_vfreq;
> > > +		info->adaptive_sync.max_vfreq = range->max_vfreq;
> > > +
> > > +		DRM_DEBUG_KMS("Adaptive Sync refresh rate range is %d Hz - %d Hz\n",
> > > +			      info->adaptive_sync.min_vfreq,
> > > +			      info->adaptive_sync.max_vfreq);
> > > +		break;
> > > +	}
> > > +}
> > > +EXPORT_SYMBOL(drm_get_adaptive_sync_limits);
> > > +
> > >  /* A connector has no EDID information, so we've got no EDID to compute quirks from. Reset
> > >   * all of the values which would have been set from EDID
> > >   */
> > > @@ -4901,6 +4949,7 @@ drm_reset_display_info(struct drm_connector *connector)
> > >  	memset(&info->hdmi, 0, sizeof(info->hdmi));
> > >  
> > >  	info->non_desktop = 0;
> > > +	memset(&info->adaptive_sync, 0, sizeof(info->adaptive_sync));
> > >  }
> > >  
> > >  u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid)
> > > @@ -4916,6 +4965,8 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi
> > >  
> > >  	info->non_desktop = !!(quirks & EDID_QUIRK_NON_DESKTOP);
> > >  
> > > +	drm_get_adaptive_sync_limits(connector, edid);
> > > +
> > >  	DRM_DEBUG_KMS("non_desktop set to %d\n", info->non_desktop);
> > >  
> > >  	if (edid->revision < 3)
> > > diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> > > index 221910948b37..77df404a2e01 100644
> > > --- a/include/drm/drm_connector.h
> > > +++ b/include/drm/drm_connector.h
> > > @@ -254,6 +254,23 @@ enum drm_panel_orientation {
> > >  	DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
> > >  };
> > >  
> > > +/**
> > > + * struct drm_adaptive_sync_info - Panel's Adaptive Sync capabilities for
> > > + * &drm_display_info
> > > + *
> > > + * This struct is used to store a Panel's Adaptive Sync capabilities
> > > + * as parsed from EDID's detailed monitor range descriptor block.
> > > + *
> > > + * @min_vfreq: This is the min supported refresh rate in Hz from
> > > + *             EDID's detailed monitor range.
> > > + * @max_vfreq: This is the max supported refresh rate in Hz from
> > > + *             EDID's detailed monitor range
> > > + */
> > > +struct drm_adaptive_sync_info {
> > > +	u8 min_vfreq;
> > > +	u8 max_vfreq;
> > > +};
> > > +
> > >  /*
> > >   * This is a consolidated colorimetry list supported by HDMI and
> > >   * DP protocol standard. The respective connectors will register
> > > @@ -465,6 +482,11 @@ struct drm_display_info {
> > >  	 * @non_desktop: Non desktop display (HMD).
> > >  	 */
> > >  	bool non_desktop;
> > > +
> > > +	/**
> > > +	 * @adaptive_sync: Adaptive Sync capabilities of the DP/eDP sink
> > > +	 */
> > > +	struct drm_adaptive_sync_info adaptive_sync;
> > >  };
> > >  
> > >  int drm_display_info_set_bus_formats(struct drm_display_info *info,
> > > diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
> > > index f0b03d401c27..b9a230aa3e69 100644
> > > --- a/include/drm/drm_edid.h
> > > +++ b/include/drm/drm_edid.h
> > > @@ -503,4 +503,6 @@ void drm_edid_get_monitor_name(struct edid *edid, char *name,
> > >  struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
> > >  					   int hsize, int vsize, int fresh,
> > >  					   bool rb);
> > > +void drm_get_adaptive_sync_limits(struct drm_connector *connector,
> > > +				  const struct edid *edid);
> > >  #endif /* __DRM_EDID_H__ */
> > > -- 
> > > 2.19.1
> > 
> > -- 
> > Ville Syrjälä
> > Intel
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v2] drm/dp: Add function to parse EDID descriptors for adaptive sync limits
  2020-01-14  0:39     ` Manasi Navare
@ 2020-01-14 13:07       ` Ville Syrjälä
  2020-01-15  0:00         ` Manasi Navare
  0 siblings, 1 reply; 12+ messages in thread
From: Ville Syrjälä @ 2020-01-14 13:07 UTC (permalink / raw)
  To: Manasi Navare; +Cc: Nicholas Kazlauskas, dri-devel

On Mon, Jan 13, 2020 at 04:39:00PM -0800, Manasi Navare wrote:
> Hi Ville,
> 
> So the two major changes you would like to see here are:
> 
>  use version_greate(edid) function 
> and make use of :
> drm_for_each_detailed_block() instead of the for loop.
> But this function does not parse the monitor range yet so
> you are suggesting modifying that dmr helper function as well?

That functions is just the thing that iterates the descriptors, so
can't figure out what you're asking.

> 
> Manasi
> 
> On Fri, Jan 10, 2020 at 03:17:43PM -0800, Manasi Navare wrote:
> > On Thu, Jan 09, 2020 at 03:08:52PM +0200, Ville Syrjälä wrote:
> > > On Tue, Jan 07, 2020 at 04:32:08PM -0800, Manasi Navare wrote:
> > > > Adaptive Sync is a VESA feature so add a DRM core helper to parse
> > > > the EDID's detailed descritors to obtain the adaptive sync monitor range.
> > > > Store this info as part fo drm_display_info so it can be used
> > > > across all drivers.
> > > > This part of the code is stripped out of amdgpu's function
> > > > amdgpu_dm_update_freesync_caps() to make it generic and be used
> > > > across all DRM drivers
> > > > 
> > > > v2:
> > > > * Change vmin and vmax to use u8 (Ville)
> > > > * Dont store pixel clock since that is just a max dotclock
> > > > and not related to VRR mode (Manasi)
> > > > 
> > > > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > > > Cc: Harry Wentland <harry.wentland@amd.com>
> > > > Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
> > > > Cc: Nicholas Kazlauskas <nicholas.kazluaskas@amd.com>
> > > > Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> > > > ---
> > > >  drivers/gpu/drm/drm_edid.c  | 51 +++++++++++++++++++++++++++++++++++++
> > > >  include/drm/drm_connector.h | 22 ++++++++++++++++
> > > >  include/drm/drm_edid.h      |  2 ++
> > > >  3 files changed, 75 insertions(+)
> > > > 
> > > > diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> > > > index 99769d6c9f84..52781a0e708b 100644
> > > > --- a/drivers/gpu/drm/drm_edid.c
> > > > +++ b/drivers/gpu/drm/drm_edid.c
> > > > @@ -4880,6 +4880,54 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
> > > >  	}
> > > >  }
> > > >  
> > > > +void drm_get_adaptive_sync_limits(struct drm_connector *connector,
> > > > +				  const struct edid *edid)
> > > > +{
> > > > +	struct drm_display_info *info = &connector->display_info;
> > > > +	const struct detailed_timing *timing;
> > > > +	const struct detailed_non_pixel *data;
> > > > +	const struct detailed_data_monitor_range *range;
> > > 
> > > Needlessly wide scope for everything above.
> > 
> > Okay will move inside the for_each loop ?
> > 
> > > 
> > > > +	int i;
> > > > +
> > > > +	/*
> > > > +	 * Restrict Adaptive Sync only for dp and edp
> > > > +	 */
> > > > +	if (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort &&
> > > > +	    connector->connector_type != DRM_MODE_CONNECTOR_eDP)
> > > > +		return;
> > > > +
> > > > +	if (edid->version <= 1 && !(edid->version == 1 && edid->revision > 1))
> > > > +		return;
> > > 
> > > if (!version_greater(...))
> > > 	return;
> > 
> > You mean simplify the condition or use define a function version_greater() to check this condition?
> > 
> > > 
> > > > +
> > > > +	for (i = 0; i < 4; i++) {
> > > 
> > > This should probably use for_each_detailed_block()
> > >
> > 
> > 
> > Ok yes will use for_each_detailed_block
> > 
> > Manasi
> > 
> >  
> > > > +		timing  = &edid->detailed_timings[i];
> > > > +		data    = &timing->data.other_data;
> > > > +		range   = &data->data.range;
> > > > +		/*
> > > > +		 * Check if monitor has continuous frequency mode
> > > > +		 */
> > > > +		if (data->type != EDID_DETAIL_MONITOR_RANGE)
> > > > +			continue;
> > > > +		/*
> > > > +		 * Check for flag range limits only. If flag == 1 then
> > > > +		 * no additional timing information provided.
> > > > +		 * Default GTF, GTF Secondary curve and CVT are not
> > > > +		 * supported
> > > > +		 */
> > > > +		if (range->flags != 1)
> > > > +			continue;
> > > > +
> > > > +		info->adaptive_sync.min_vfreq = range->min_vfreq;
> > > > +		info->adaptive_sync.max_vfreq = range->max_vfreq;
> > > > +
> > > > +		DRM_DEBUG_KMS("Adaptive Sync refresh rate range is %d Hz - %d Hz\n",
> > > > +			      info->adaptive_sync.min_vfreq,
> > > > +			      info->adaptive_sync.max_vfreq);
> > > > +		break;
> > > > +	}
> > > > +}
> > > > +EXPORT_SYMBOL(drm_get_adaptive_sync_limits);
> > > > +
> > > >  /* A connector has no EDID information, so we've got no EDID to compute quirks from. Reset
> > > >   * all of the values which would have been set from EDID
> > > >   */
> > > > @@ -4901,6 +4949,7 @@ drm_reset_display_info(struct drm_connector *connector)
> > > >  	memset(&info->hdmi, 0, sizeof(info->hdmi));
> > > >  
> > > >  	info->non_desktop = 0;
> > > > +	memset(&info->adaptive_sync, 0, sizeof(info->adaptive_sync));
> > > >  }
> > > >  
> > > >  u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid)
> > > > @@ -4916,6 +4965,8 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi
> > > >  
> > > >  	info->non_desktop = !!(quirks & EDID_QUIRK_NON_DESKTOP);
> > > >  
> > > > +	drm_get_adaptive_sync_limits(connector, edid);
> > > > +
> > > >  	DRM_DEBUG_KMS("non_desktop set to %d\n", info->non_desktop);
> > > >  
> > > >  	if (edid->revision < 3)
> > > > diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> > > > index 221910948b37..77df404a2e01 100644
> > > > --- a/include/drm/drm_connector.h
> > > > +++ b/include/drm/drm_connector.h
> > > > @@ -254,6 +254,23 @@ enum drm_panel_orientation {
> > > >  	DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
> > > >  };
> > > >  
> > > > +/**
> > > > + * struct drm_adaptive_sync_info - Panel's Adaptive Sync capabilities for
> > > > + * &drm_display_info
> > > > + *
> > > > + * This struct is used to store a Panel's Adaptive Sync capabilities
> > > > + * as parsed from EDID's detailed monitor range descriptor block.
> > > > + *
> > > > + * @min_vfreq: This is the min supported refresh rate in Hz from
> > > > + *             EDID's detailed monitor range.
> > > > + * @max_vfreq: This is the max supported refresh rate in Hz from
> > > > + *             EDID's detailed monitor range
> > > > + */
> > > > +struct drm_adaptive_sync_info {
> > > > +	u8 min_vfreq;
> > > > +	u8 max_vfreq;
> > > > +};
> > > > +
> > > >  /*
> > > >   * This is a consolidated colorimetry list supported by HDMI and
> > > >   * DP protocol standard. The respective connectors will register
> > > > @@ -465,6 +482,11 @@ struct drm_display_info {
> > > >  	 * @non_desktop: Non desktop display (HMD).
> > > >  	 */
> > > >  	bool non_desktop;
> > > > +
> > > > +	/**
> > > > +	 * @adaptive_sync: Adaptive Sync capabilities of the DP/eDP sink
> > > > +	 */
> > > > +	struct drm_adaptive_sync_info adaptive_sync;
> > > >  };
> > > >  
> > > >  int drm_display_info_set_bus_formats(struct drm_display_info *info,
> > > > diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
> > > > index f0b03d401c27..b9a230aa3e69 100644
> > > > --- a/include/drm/drm_edid.h
> > > > +++ b/include/drm/drm_edid.h
> > > > @@ -503,4 +503,6 @@ void drm_edid_get_monitor_name(struct edid *edid, char *name,
> > > >  struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
> > > >  					   int hsize, int vsize, int fresh,
> > > >  					   bool rb);
> > > > +void drm_get_adaptive_sync_limits(struct drm_connector *connector,
> > > > +				  const struct edid *edid);
> > > >  #endif /* __DRM_EDID_H__ */
> > > > -- 
> > > > 2.19.1
> > > 
> > > -- 
> > > Ville Syrjälä
> > > Intel
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Ville Syrjälä
Intel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v2] drm/dp: Add function to parse EDID descriptors for adaptive sync limits
  2020-01-10 22:43   ` Manasi Navare
@ 2020-01-14 13:31     ` Harry Wentland
  2020-01-14 13:38       ` Jani Nikula
  2020-01-15  0:02       ` Manasi Navare
  0 siblings, 2 replies; 12+ messages in thread
From: Harry Wentland @ 2020-01-14 13:31 UTC (permalink / raw)
  To: Manasi Navare, Jani Nikula; +Cc: Kazlauskas, Nicholas, dri-devel

Fixing Nick's email.

On 2020-01-10 5:43 p.m., Manasi Navare wrote:
> On Thu, Jan 09, 2020 at 05:24:30PM +0200, Jani Nikula wrote:
>> On Tue, 07 Jan 2020, Manasi Navare <manasi.d.navare@intel.com> wrote:
>>> Adaptive Sync is a VESA feature so add a DRM core helper to parse
>>> the EDID's detailed descritors to obtain the adaptive sync monitor range.
>>> Store this info as part fo drm_display_info so it can be used
>>> across all drivers.
>>> This part of the code is stripped out of amdgpu's function
>>> amdgpu_dm_update_freesync_caps() to make it generic and be used
>>> across all DRM drivers
>>>
>>> v2:
>>> * Change vmin and vmax to use u8 (Ville)
>>> * Dont store pixel clock since that is just a max dotclock
>>> and not related to VRR mode (Manasi)
>>>
>>> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
>>> Cc: Harry Wentland <harry.wentland@amd.com>
>>> Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
>>> Cc: Nicholas Kazlauskas <nicholas.kazluaskas@amd.com>
>>> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
>>> ---
>>>  drivers/gpu/drm/drm_edid.c  | 51 +++++++++++++++++++++++++++++++++++++
>>>  include/drm/drm_connector.h | 22 ++++++++++++++++
>>>  include/drm/drm_edid.h      |  2 ++
>>>  3 files changed, 75 insertions(+)
>>>
>>> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
>>> index 99769d6c9f84..52781a0e708b 100644
>>> --- a/drivers/gpu/drm/drm_edid.c
>>> +++ b/drivers/gpu/drm/drm_edid.c
>>> @@ -4880,6 +4880,54 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
>>>  	}
>>>  }
>>>  
>>> +void drm_get_adaptive_sync_limits(struct drm_connector *connector,
>>> +				  const struct edid *edid)
>>> +{
>>> +	struct drm_display_info *info = &connector->display_info;
>>> +	const struct detailed_timing *timing;
>>> +	const struct detailed_non_pixel *data;
>>> +	const struct detailed_data_monitor_range *range;
>>> +	int i;
>>> +
>>> +	/*
>>> +	 * Restrict Adaptive Sync only for dp and edp
>>> +	 */
>>> +	if (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort &&
>>> +	    connector->connector_type != DRM_MODE_CONNECTOR_eDP)
>>> +		return;
>>> +
>>> +	if (edid->version <= 1 && !(edid->version == 1 && edid->revision > 1))
>>> +		return;
>>> +
>>> +	for (i = 0; i < 4; i++) {
>>> +		timing  = &edid->detailed_timings[i];
>>> +		data    = &timing->data.other_data;
>>> +		range   = &data->data.range;
>>> +		/*
>>> +		 * Check if monitor has continuous frequency mode
>>> +		 */
>>> +		if (data->type != EDID_DETAIL_MONITOR_RANGE)
>>> +			continue;
>>> +		/*
>>> +		 * Check for flag range limits only. If flag == 1 then
>>> +		 * no additional timing information provided.
>>> +		 * Default GTF, GTF Secondary curve and CVT are not
>>> +		 * supported
>>> +		 */
>>> +		if (range->flags != 1)
>>> +			continue;
>>> +
>>> +		info->adaptive_sync.min_vfreq = range->min_vfreq;
>>> +		info->adaptive_sync.max_vfreq = range->max_vfreq;
>>> +
>>> +		DRM_DEBUG_KMS("Adaptive Sync refresh rate range is %d Hz - %d Hz\n",
>>> +			      info->adaptive_sync.min_vfreq,
>>> +			      info->adaptive_sync.max_vfreq);
>>> +		break;
>>> +	}
>>> +}
>>> +EXPORT_SYMBOL(drm_get_adaptive_sync_limits);
>>
>> Why the export? Rather, why is this not static?
>>
> 
> I could make it static but since the way AMDGPU code is written right now they
> would be calling this function explicitly to populate the vmin and vmax in their local
> structs but I can make it static and with some minor refactoring they should be able to
> use thsi infor directly from drm_display_info
> 

Calling this through drm_add_edid_modes should be sufficient for us.
We'll just need to move amdgpu_dm_update_freesync_caps to our get_modes
function.

Dropping the export here seems to be the right thing to do.

Harry

> Manasi
>  
>> BR,
>> Jani.
>>
>>> +
>>>  /* A connector has no EDID information, so we've got no EDID to compute quirks from. Reset
>>>   * all of the values which would have been set from EDID
>>>   */
>>> @@ -4901,6 +4949,7 @@ drm_reset_display_info(struct drm_connector *connector)
>>>  	memset(&info->hdmi, 0, sizeof(info->hdmi));
>>>  
>>>  	info->non_desktop = 0;
>>> +	memset(&info->adaptive_sync, 0, sizeof(info->adaptive_sync));
>>>  }
>>>  
>>>  u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid)
>>> @@ -4916,6 +4965,8 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi
>>>  
>>>  	info->non_desktop = !!(quirks & EDID_QUIRK_NON_DESKTOP);
>>>  
>>> +	drm_get_adaptive_sync_limits(connector, edid);
>>> +
>>>  	DRM_DEBUG_KMS("non_desktop set to %d\n", info->non_desktop);
>>>  
>>>  	if (edid->revision < 3)
>>> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
>>> index 221910948b37..77df404a2e01 100644
>>> --- a/include/drm/drm_connector.h
>>> +++ b/include/drm/drm_connector.h
>>> @@ -254,6 +254,23 @@ enum drm_panel_orientation {
>>>  	DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
>>>  };
>>>  
>>> +/**
>>> + * struct drm_adaptive_sync_info - Panel's Adaptive Sync capabilities for
>>> + * &drm_display_info
>>> + *
>>> + * This struct is used to store a Panel's Adaptive Sync capabilities
>>> + * as parsed from EDID's detailed monitor range descriptor block.
>>> + *
>>> + * @min_vfreq: This is the min supported refresh rate in Hz from
>>> + *             EDID's detailed monitor range.
>>> + * @max_vfreq: This is the max supported refresh rate in Hz from
>>> + *             EDID's detailed monitor range
>>> + */
>>> +struct drm_adaptive_sync_info {
>>> +	u8 min_vfreq;
>>> +	u8 max_vfreq;
>>> +};
>>> +
>>>  /*
>>>   * This is a consolidated colorimetry list supported by HDMI and
>>>   * DP protocol standard. The respective connectors will register
>>> @@ -465,6 +482,11 @@ struct drm_display_info {
>>>  	 * @non_desktop: Non desktop display (HMD).
>>>  	 */
>>>  	bool non_desktop;
>>> +
>>> +	/**
>>> +	 * @adaptive_sync: Adaptive Sync capabilities of the DP/eDP sink
>>> +	 */
>>> +	struct drm_adaptive_sync_info adaptive_sync;
>>>  };
>>>  
>>>  int drm_display_info_set_bus_formats(struct drm_display_info *info,
>>> diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
>>> index f0b03d401c27..b9a230aa3e69 100644
>>> --- a/include/drm/drm_edid.h
>>> +++ b/include/drm/drm_edid.h
>>> @@ -503,4 +503,6 @@ void drm_edid_get_monitor_name(struct edid *edid, char *name,
>>>  struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
>>>  					   int hsize, int vsize, int fresh,
>>>  					   bool rb);
>>> +void drm_get_adaptive_sync_limits(struct drm_connector *connector,
>>> +				  const struct edid *edid);
>>>  #endif /* __DRM_EDID_H__ */
>>
>> -- 
>> Jani Nikula, Intel Open Source Graphics Center
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v2] drm/dp: Add function to parse EDID descriptors for adaptive sync limits
  2020-01-14 13:31     ` Harry Wentland
@ 2020-01-14 13:38       ` Jani Nikula
  2020-01-15  0:02       ` Manasi Navare
  1 sibling, 0 replies; 12+ messages in thread
From: Jani Nikula @ 2020-01-14 13:38 UTC (permalink / raw)
  To: Harry Wentland, Manasi Navare; +Cc: Kazlauskas, Nicholas, dri-devel

On Tue, 14 Jan 2020, Harry Wentland <hwentlan@amd.com> wrote:
> Fixing Nick's email.
>
> On 2020-01-10 5:43 p.m., Manasi Navare wrote:
>> On Thu, Jan 09, 2020 at 05:24:30PM +0200, Jani Nikula wrote:
>>> On Tue, 07 Jan 2020, Manasi Navare <manasi.d.navare@intel.com> wrote:
>>>> +EXPORT_SYMBOL(drm_get_adaptive_sync_limits);
>>>
>>> Why the export? Rather, why is this not static?
>>>
>> 
>> I could make it static but since the way AMDGPU code is written right now they
>> would be calling this function explicitly to populate the vmin and vmax in their local
>> structs but I can make it static and with some minor refactoring they should be able to
>> use thsi infor directly from drm_display_info
>> 
>
> Calling this through drm_add_edid_modes should be sufficient for us.
> We'll just need to move amdgpu_dm_update_freesync_caps to our get_modes
> function.
>
> Dropping the export here seems to be the right thing to do.

Thanks; this should help unify the behaviour across drivers.

BR,
Jani.


-- 
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v2] drm/dp: Add function to parse EDID descriptors for adaptive sync limits
  2020-01-14 13:07       ` Ville Syrjälä
@ 2020-01-15  0:00         ` Manasi Navare
  0 siblings, 0 replies; 12+ messages in thread
From: Manasi Navare @ 2020-01-15  0:00 UTC (permalink / raw)
  To: Ville Syrjälä; +Cc: Nicholas Kazlauskas, dri-devel

On Tue, Jan 14, 2020 at 03:07:56PM +0200, Ville Syrjälä wrote:
> On Mon, Jan 13, 2020 at 04:39:00PM -0800, Manasi Navare wrote:
> > Hi Ville,
> > 
> > So the two major changes you would like to see here are:
> > 
> >  use version_greate(edid) function 
> > and make use of :
> > drm_for_each_detailed_block() instead of the for loop.
> > But this function does not parse the monitor range yet so
> > you are suggesting modifying that dmr helper function as well?
> 
> That functions is just the thing that iterates the descriptors, so
> can't figure out what you're asking.

My question was on your review comment below where you asked me to use
for_each_detailed_block(), were you referring to using the existing drm_for_each_detailed_block
or just defining a new iterator for looping through 4 detailed blocks to get the
monitor range?

Manasi

> 
> > 
> > Manasi
> > 
> > On Fri, Jan 10, 2020 at 03:17:43PM -0800, Manasi Navare wrote:
> > > On Thu, Jan 09, 2020 at 03:08:52PM +0200, Ville Syrjälä wrote:
> > > > On Tue, Jan 07, 2020 at 04:32:08PM -0800, Manasi Navare wrote:
> > > > > Adaptive Sync is a VESA feature so add a DRM core helper to parse
> > > > > the EDID's detailed descritors to obtain the adaptive sync monitor range.
> > > > > Store this info as part fo drm_display_info so it can be used
> > > > > across all drivers.
> > > > > This part of the code is stripped out of amdgpu's function
> > > > > amdgpu_dm_update_freesync_caps() to make it generic and be used
> > > > > across all DRM drivers
> > > > > 
> > > > > v2:
> > > > > * Change vmin and vmax to use u8 (Ville)
> > > > > * Dont store pixel clock since that is just a max dotclock
> > > > > and not related to VRR mode (Manasi)
> > > > > 
> > > > > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > > > > Cc: Harry Wentland <harry.wentland@amd.com>
> > > > > Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
> > > > > Cc: Nicholas Kazlauskas <nicholas.kazluaskas@amd.com>
> > > > > Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> > > > > ---
> > > > >  drivers/gpu/drm/drm_edid.c  | 51 +++++++++++++++++++++++++++++++++++++
> > > > >  include/drm/drm_connector.h | 22 ++++++++++++++++
> > > > >  include/drm/drm_edid.h      |  2 ++
> > > > >  3 files changed, 75 insertions(+)
> > > > > 
> > > > > diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> > > > > index 99769d6c9f84..52781a0e708b 100644
> > > > > --- a/drivers/gpu/drm/drm_edid.c
> > > > > +++ b/drivers/gpu/drm/drm_edid.c
> > > > > @@ -4880,6 +4880,54 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
> > > > >  	}
> > > > >  }
> > > > >  
> > > > > +void drm_get_adaptive_sync_limits(struct drm_connector *connector,
> > > > > +				  const struct edid *edid)
> > > > > +{
> > > > > +	struct drm_display_info *info = &connector->display_info;
> > > > > +	const struct detailed_timing *timing;
> > > > > +	const struct detailed_non_pixel *data;
> > > > > +	const struct detailed_data_monitor_range *range;
> > > > 
> > > > Needlessly wide scope for everything above.
> > > 
> > > Okay will move inside the for_each loop ?
> > > 
> > > > 
> > > > > +	int i;
> > > > > +
> > > > > +	/*
> > > > > +	 * Restrict Adaptive Sync only for dp and edp
> > > > > +	 */
> > > > > +	if (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort &&
> > > > > +	    connector->connector_type != DRM_MODE_CONNECTOR_eDP)
> > > > > +		return;
> > > > > +
> > > > > +	if (edid->version <= 1 && !(edid->version == 1 && edid->revision > 1))
> > > > > +		return;
> > > > 
> > > > if (!version_greater(...))
> > > > 	return;
> > > 
> > > You mean simplify the condition or use define a function version_greater() to check this condition?
> > > 
> > > > 
> > > > > +
> > > > > +	for (i = 0; i < 4; i++) {
> > > > 
> > > > This should probably use for_each_detailed_block()
> > > >
> > > 
> > > 
> > > Ok yes will use for_each_detailed_block
> > > 
> > > Manasi
> > > 
> > >  
> > > > > +		timing  = &edid->detailed_timings[i];
> > > > > +		data    = &timing->data.other_data;
> > > > > +		range   = &data->data.range;
> > > > > +		/*
> > > > > +		 * Check if monitor has continuous frequency mode
> > > > > +		 */
> > > > > +		if (data->type != EDID_DETAIL_MONITOR_RANGE)
> > > > > +			continue;
> > > > > +		/*
> > > > > +		 * Check for flag range limits only. If flag == 1 then
> > > > > +		 * no additional timing information provided.
> > > > > +		 * Default GTF, GTF Secondary curve and CVT are not
> > > > > +		 * supported
> > > > > +		 */
> > > > > +		if (range->flags != 1)
> > > > > +			continue;
> > > > > +
> > > > > +		info->adaptive_sync.min_vfreq = range->min_vfreq;
> > > > > +		info->adaptive_sync.max_vfreq = range->max_vfreq;
> > > > > +
> > > > > +		DRM_DEBUG_KMS("Adaptive Sync refresh rate range is %d Hz - %d Hz\n",
> > > > > +			      info->adaptive_sync.min_vfreq,
> > > > > +			      info->adaptive_sync.max_vfreq);
> > > > > +		break;
> > > > > +	}
> > > > > +}
> > > > > +EXPORT_SYMBOL(drm_get_adaptive_sync_limits);
> > > > > +
> > > > >  /* A connector has no EDID information, so we've got no EDID to compute quirks from. Reset
> > > > >   * all of the values which would have been set from EDID
> > > > >   */
> > > > > @@ -4901,6 +4949,7 @@ drm_reset_display_info(struct drm_connector *connector)
> > > > >  	memset(&info->hdmi, 0, sizeof(info->hdmi));
> > > > >  
> > > > >  	info->non_desktop = 0;
> > > > > +	memset(&info->adaptive_sync, 0, sizeof(info->adaptive_sync));
> > > > >  }
> > > > >  
> > > > >  u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid)
> > > > > @@ -4916,6 +4965,8 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi
> > > > >  
> > > > >  	info->non_desktop = !!(quirks & EDID_QUIRK_NON_DESKTOP);
> > > > >  
> > > > > +	drm_get_adaptive_sync_limits(connector, edid);
> > > > > +
> > > > >  	DRM_DEBUG_KMS("non_desktop set to %d\n", info->non_desktop);
> > > > >  
> > > > >  	if (edid->revision < 3)
> > > > > diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> > > > > index 221910948b37..77df404a2e01 100644
> > > > > --- a/include/drm/drm_connector.h
> > > > > +++ b/include/drm/drm_connector.h
> > > > > @@ -254,6 +254,23 @@ enum drm_panel_orientation {
> > > > >  	DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
> > > > >  };
> > > > >  
> > > > > +/**
> > > > > + * struct drm_adaptive_sync_info - Panel's Adaptive Sync capabilities for
> > > > > + * &drm_display_info
> > > > > + *
> > > > > + * This struct is used to store a Panel's Adaptive Sync capabilities
> > > > > + * as parsed from EDID's detailed monitor range descriptor block.
> > > > > + *
> > > > > + * @min_vfreq: This is the min supported refresh rate in Hz from
> > > > > + *             EDID's detailed monitor range.
> > > > > + * @max_vfreq: This is the max supported refresh rate in Hz from
> > > > > + *             EDID's detailed monitor range
> > > > > + */
> > > > > +struct drm_adaptive_sync_info {
> > > > > +	u8 min_vfreq;
> > > > > +	u8 max_vfreq;
> > > > > +};
> > > > > +
> > > > >  /*
> > > > >   * This is a consolidated colorimetry list supported by HDMI and
> > > > >   * DP protocol standard. The respective connectors will register
> > > > > @@ -465,6 +482,11 @@ struct drm_display_info {
> > > > >  	 * @non_desktop: Non desktop display (HMD).
> > > > >  	 */
> > > > >  	bool non_desktop;
> > > > > +
> > > > > +	/**
> > > > > +	 * @adaptive_sync: Adaptive Sync capabilities of the DP/eDP sink
> > > > > +	 */
> > > > > +	struct drm_adaptive_sync_info adaptive_sync;
> > > > >  };
> > > > >  
> > > > >  int drm_display_info_set_bus_formats(struct drm_display_info *info,
> > > > > diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
> > > > > index f0b03d401c27..b9a230aa3e69 100644
> > > > > --- a/include/drm/drm_edid.h
> > > > > +++ b/include/drm/drm_edid.h
> > > > > @@ -503,4 +503,6 @@ void drm_edid_get_monitor_name(struct edid *edid, char *name,
> > > > >  struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
> > > > >  					   int hsize, int vsize, int fresh,
> > > > >  					   bool rb);
> > > > > +void drm_get_adaptive_sync_limits(struct drm_connector *connector,
> > > > > +				  const struct edid *edid);
> > > > >  #endif /* __DRM_EDID_H__ */
> > > > > -- 
> > > > > 2.19.1
> > > > 
> > > > -- 
> > > > Ville Syrjälä
> > > > Intel
> > > _______________________________________________
> > > dri-devel mailing list
> > > dri-devel@lists.freedesktop.org
> > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> 
> -- 
> Ville Syrjälä
> Intel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v2] drm/dp: Add function to parse EDID descriptors for adaptive sync limits
  2020-01-14 13:31     ` Harry Wentland
  2020-01-14 13:38       ` Jani Nikula
@ 2020-01-15  0:02       ` Manasi Navare
  1 sibling, 0 replies; 12+ messages in thread
From: Manasi Navare @ 2020-01-15  0:02 UTC (permalink / raw)
  To: Harry Wentland; +Cc: dri-devel, Kazlauskas, Nicholas

On Tue, Jan 14, 2020 at 08:31:22AM -0500, Harry Wentland wrote:
> Fixing Nick's email.
> 
> On 2020-01-10 5:43 p.m., Manasi Navare wrote:
> > On Thu, Jan 09, 2020 at 05:24:30PM +0200, Jani Nikula wrote:
> >> On Tue, 07 Jan 2020, Manasi Navare <manasi.d.navare@intel.com> wrote:
> >>> Adaptive Sync is a VESA feature so add a DRM core helper to parse
> >>> the EDID's detailed descritors to obtain the adaptive sync monitor range.
> >>> Store this info as part fo drm_display_info so it can be used
> >>> across all drivers.
> >>> This part of the code is stripped out of amdgpu's function
> >>> amdgpu_dm_update_freesync_caps() to make it generic and be used
> >>> across all DRM drivers
> >>>
> >>> v2:
> >>> * Change vmin and vmax to use u8 (Ville)
> >>> * Dont store pixel clock since that is just a max dotclock
> >>> and not related to VRR mode (Manasi)
> >>>
> >>> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> >>> Cc: Harry Wentland <harry.wentland@amd.com>
> >>> Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
> >>> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
> >>> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> >>> ---
> >>>  drivers/gpu/drm/drm_edid.c  | 51 +++++++++++++++++++++++++++++++++++++
> >>>  include/drm/drm_connector.h | 22 ++++++++++++++++
> >>>  include/drm/drm_edid.h      |  2 ++
> >>>  3 files changed, 75 insertions(+)
> >>>
> >>> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> >>> index 99769d6c9f84..52781a0e708b 100644
> >>> --- a/drivers/gpu/drm/drm_edid.c
> >>> +++ b/drivers/gpu/drm/drm_edid.c
> >>> @@ -4880,6 +4880,54 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
> >>>  	}
> >>>  }
> >>>  
> >>> +void drm_get_adaptive_sync_limits(struct drm_connector *connector,
> >>> +				  const struct edid *edid)
> >>> +{
> >>> +	struct drm_display_info *info = &connector->display_info;
> >>> +	const struct detailed_timing *timing;
> >>> +	const struct detailed_non_pixel *data;
> >>> +	const struct detailed_data_monitor_range *range;
> >>> +	int i;
> >>> +
> >>> +	/*
> >>> +	 * Restrict Adaptive Sync only for dp and edp
> >>> +	 */
> >>> +	if (connector->connector_type != DRM_MODE_CONNECTOR_DisplayPort &&
> >>> +	    connector->connector_type != DRM_MODE_CONNECTOR_eDP)
> >>> +		return;
> >>> +
> >>> +	if (edid->version <= 1 && !(edid->version == 1 && edid->revision > 1))
> >>> +		return;
> >>> +
> >>> +	for (i = 0; i < 4; i++) {
> >>> +		timing  = &edid->detailed_timings[i];
> >>> +		data    = &timing->data.other_data;
> >>> +		range   = &data->data.range;
> >>> +		/*
> >>> +		 * Check if monitor has continuous frequency mode
> >>> +		 */
> >>> +		if (data->type != EDID_DETAIL_MONITOR_RANGE)
> >>> +			continue;
> >>> +		/*
> >>> +		 * Check for flag range limits only. If flag == 1 then
> >>> +		 * no additional timing information provided.
> >>> +		 * Default GTF, GTF Secondary curve and CVT are not
> >>> +		 * supported
> >>> +		 */
> >>> +		if (range->flags != 1)
> >>> +			continue;
> >>> +
> >>> +		info->adaptive_sync.min_vfreq = range->min_vfreq;
> >>> +		info->adaptive_sync.max_vfreq = range->max_vfreq;
> >>> +
> >>> +		DRM_DEBUG_KMS("Adaptive Sync refresh rate range is %d Hz - %d Hz\n",
> >>> +			      info->adaptive_sync.min_vfreq,
> >>> +			      info->adaptive_sync.max_vfreq);
> >>> +		break;
> >>> +	}
> >>> +}
> >>> +EXPORT_SYMBOL(drm_get_adaptive_sync_limits);
> >>
> >> Why the export? Rather, why is this not static?
> >>
> > 
> > I could make it static but since the way AMDGPU code is written right now they
> > would be calling this function explicitly to populate the vmin and vmax in their local
> > structs but I can make it static and with some minor refactoring they should be able to
> > use thsi infor directly from drm_display_info
> > 
> 
> Calling this through drm_add_edid_modes should be sufficient for us.
> We'll just need to move amdgpu_dm_update_freesync_caps to our get_modes
> function.

Thanks Harry, Would you or Nick make these changes as follow up changes after this patch lands?
Since it might be easier for you to figure out where to accomodate the changes in amdgpu.

Manasi


> 
> Dropping the export here seems to be the right thing to do.
> 
> Harry
> 
> > Manasi
> >  
> >> BR,
> >> Jani.
> >>
> >>> +
> >>>  /* A connector has no EDID information, so we've got no EDID to compute quirks from. Reset
> >>>   * all of the values which would have been set from EDID
> >>>   */
> >>> @@ -4901,6 +4949,7 @@ drm_reset_display_info(struct drm_connector *connector)
> >>>  	memset(&info->hdmi, 0, sizeof(info->hdmi));
> >>>  
> >>>  	info->non_desktop = 0;
> >>> +	memset(&info->adaptive_sync, 0, sizeof(info->adaptive_sync));
> >>>  }
> >>>  
> >>>  u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid)
> >>> @@ -4916,6 +4965,8 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi
> >>>  
> >>>  	info->non_desktop = !!(quirks & EDID_QUIRK_NON_DESKTOP);
> >>>  
> >>> +	drm_get_adaptive_sync_limits(connector, edid);
> >>> +
> >>>  	DRM_DEBUG_KMS("non_desktop set to %d\n", info->non_desktop);
> >>>  
> >>>  	if (edid->revision < 3)
> >>> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> >>> index 221910948b37..77df404a2e01 100644
> >>> --- a/include/drm/drm_connector.h
> >>> +++ b/include/drm/drm_connector.h
> >>> @@ -254,6 +254,23 @@ enum drm_panel_orientation {
> >>>  	DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
> >>>  };
> >>>  
> >>> +/**
> >>> + * struct drm_adaptive_sync_info - Panel's Adaptive Sync capabilities for
> >>> + * &drm_display_info
> >>> + *
> >>> + * This struct is used to store a Panel's Adaptive Sync capabilities
> >>> + * as parsed from EDID's detailed monitor range descriptor block.
> >>> + *
> >>> + * @min_vfreq: This is the min supported refresh rate in Hz from
> >>> + *             EDID's detailed monitor range.
> >>> + * @max_vfreq: This is the max supported refresh rate in Hz from
> >>> + *             EDID's detailed monitor range
> >>> + */
> >>> +struct drm_adaptive_sync_info {
> >>> +	u8 min_vfreq;
> >>> +	u8 max_vfreq;
> >>> +};
> >>> +
> >>>  /*
> >>>   * This is a consolidated colorimetry list supported by HDMI and
> >>>   * DP protocol standard. The respective connectors will register
> >>> @@ -465,6 +482,11 @@ struct drm_display_info {
> >>>  	 * @non_desktop: Non desktop display (HMD).
> >>>  	 */
> >>>  	bool non_desktop;
> >>> +
> >>> +	/**
> >>> +	 * @adaptive_sync: Adaptive Sync capabilities of the DP/eDP sink
> >>> +	 */
> >>> +	struct drm_adaptive_sync_info adaptive_sync;
> >>>  };
> >>>  
> >>>  int drm_display_info_set_bus_formats(struct drm_display_info *info,
> >>> diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
> >>> index f0b03d401c27..b9a230aa3e69 100644
> >>> --- a/include/drm/drm_edid.h
> >>> +++ b/include/drm/drm_edid.h
> >>> @@ -503,4 +503,6 @@ void drm_edid_get_monitor_name(struct edid *edid, char *name,
> >>>  struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
> >>>  					   int hsize, int vsize, int fresh,
> >>>  					   bool rb);
> >>> +void drm_get_adaptive_sync_limits(struct drm_connector *connector,
> >>> +				  const struct edid *edid);
> >>>  #endif /* __DRM_EDID_H__ */
> >>
> >> -- 
> >> Jani Nikula, Intel Open Source Graphics Center
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> > 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, back to index

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-08  0:32 [PATCH v2] drm/dp: Add function to parse EDID descriptors for adaptive sync limits Manasi Navare
2020-01-08 18:46 ` Manasi Navare
2020-01-09 13:08 ` Ville Syrjälä
2020-01-10 23:17   ` Manasi Navare
2020-01-14  0:39     ` Manasi Navare
2020-01-14 13:07       ` Ville Syrjälä
2020-01-15  0:00         ` Manasi Navare
2020-01-09 15:24 ` Jani Nikula
2020-01-10 22:43   ` Manasi Navare
2020-01-14 13:31     ` Harry Wentland
2020-01-14 13:38       ` Jani Nikula
2020-01-15  0:02       ` Manasi Navare

dri-devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dri-devel/0 dri-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dri-devel dri-devel/ https://lore.kernel.org/dri-devel \
		dri-devel@lists.freedesktop.org
	public-inbox-index dri-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.dri-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git