[[Intel-gfx] [PATCH v2 00/10] drm: Introduce struct drm_device based WARN* and use them in i915

[[Intel-gfx] [PATCH v2 00/10] drm: Introduce struct drm_device based WARN* and use them in i915

[Pankaj Bharadiya]

Device specific dev_WARN and dev_WARN_ONCE macros available in kernel
include device information in the backtrace, so we know what device
the warnings originate from.

Similar to this, add new struct drm_device based drm_WARN* macros. These
macros include device information in the backtrace, so we know
what device the warnings originate from. Knowing the device specific
information in the backtrace would be helpful in development all
around.

This patch series aims to convert calls of WARN(), WARN_ON(),
WARN_ONCE() and WARN_ON_ONCE() in i916 driver to use the drm
device-specific variants automatically wherever struct device pointer
is available.

To do this, this patch series -
  - introduces new struct drm_device based WARN* macros
  - automatically converts WARN* with device specific dev_WARN*
    variants using coccinelle semantic patch scripts.

The goal is to convert all the calls of WARN* with drm_WARN* in i915,
but there are still cases where device pointer is not readily
available in some functions (or I missed them somehow) using WARN*
hence some manual churning is needed. Handle such remaining cases
separately later.

changes since v1:
  - Address Jani's review comments
    - Fix typo in comment of patch 0001
    - Get rid of helper functions
    - Split patches by directory 

Changes since RFC at [1]
  - Introduce drm_WARN* macros and use them as suggested by Sam and Jani
  - Get rid of extra local variables

[1] https://patchwork.freedesktop.org/series/71668/


Pankaj Bharadiya (10):
  drm/print: introduce new struct drm_device based WARN* macros
  drm/i915/display: Make WARN* drm specific where drm_device ptr is available
  drm/i915/display: Make WARN* drm specific where drm_priv ptr is available
  drm/i915/display: Make WARN* drm specific where encoder ptr is available
  drm/i915/gem: Make WARN* drm specific where drm_priv ptr is available
  drm/i915/gt: Make WARN* drm specific where drm_priv ptr is available
  drm/i915/gvt: Make WARN* drm specific where drm_priv ptr is available
  drm/i915/gvt: Make WARN* drm specific where vgpu ptr is available
  drm/i915: Make WARN* drm specific where drm_priv ptr is available
  drm/i915: Make WARN* drm specific where uncore or stream ptr is available

 drivers/gpu/drm/i915/display/icl_dsi.c        |  14 +-
 drivers/gpu/drm/i915/display/intel_atomic.c   |   6 +-
 drivers/gpu/drm/i915/display/intel_audio.c    |  19 +-
 drivers/gpu/drm/i915/display/intel_bios.c     |  10 +-
 drivers/gpu/drm/i915/display/intel_bw.c       |   3 +-
 drivers/gpu/drm/i915/display/intel_cdclk.c    |  81 ++++---
 drivers/gpu/drm/i915/display/intel_color.c    |   4 +-
 .../gpu/drm/i915/display/intel_combo_phy.c    |   2 +-
 .../gpu/drm/i915/display/intel_connector.c    |   3 +-
 drivers/gpu/drm/i915/display/intel_crt.c      |  10 +-
 drivers/gpu/drm/i915/display/intel_ddi.c      | 100 ++++----
 drivers/gpu/drm/i915/display/intel_display.c  | 228 ++++++++++--------
 .../drm/i915/display/intel_display_power.c    | 169 +++++++------
 drivers/gpu/drm/i915/display/intel_dp.c       | 123 ++++++----
 drivers/gpu/drm/i915/display/intel_dp_mst.c   |  10 +-
 drivers/gpu/drm/i915/display/intel_dpio_phy.c |   3 +-
 drivers/gpu/drm/i915/display/intel_dpll_mgr.c |  37 +--
 drivers/gpu/drm/i915/display/intel_dsb.c      |   6 +-
 .../i915/display/intel_dsi_dcs_backlight.c    |   2 +-
 drivers/gpu/drm/i915/display/intel_dsi_vbt.c  |   5 +-
 drivers/gpu/drm/i915/display/intel_fbc.c      |  23 +-
 drivers/gpu/drm/i915/display/intel_fbdev.c    |  13 +-
 drivers/gpu/drm/i915/display/intel_gmbus.c    |   3 +-
 drivers/gpu/drm/i915/display/intel_hdcp.c     |  21 +-
 drivers/gpu/drm/i915/display/intel_hdmi.c     |  71 +++---
 drivers/gpu/drm/i915/display/intel_hotplug.c  |   7 +-
 .../gpu/drm/i915/display/intel_lpe_audio.c    |   2 +-
 drivers/gpu/drm/i915/display/intel_lvds.c     |   7 +-
 drivers/gpu/drm/i915/display/intel_opregion.c |   7 +-
 drivers/gpu/drm/i915/display/intel_overlay.c  |  14 +-
 drivers/gpu/drm/i915/display/intel_panel.c    |  19 +-
 drivers/gpu/drm/i915/display/intel_pipe_crc.c |   7 +-
 drivers/gpu/drm/i915/display/intel_psr.c      |  32 +--
 drivers/gpu/drm/i915/display/intel_sdvo.c     |  14 +-
 drivers/gpu/drm/i915/display/intel_sprite.c   |   5 +-
 drivers/gpu/drm/i915/display/intel_tc.c       |  18 +-
 drivers/gpu/drm/i915/display/intel_vdsc.c     |   2 +-
 drivers/gpu/drm/i915/display/vlv_dsi.c        |   2 +-
 drivers/gpu/drm/i915/gem/i915_gem_pm.c        |   3 +-
 drivers/gpu/drm/i915/gem/i915_gem_shmem.c     |   3 +-
 drivers/gpu/drm/i915/gem/i915_gem_shrinker.c  |  13 +-
 drivers/gpu/drm/i915/gem/i915_gem_stolen.c    |  15 +-
 drivers/gpu/drm/i915/gt/intel_engine_cs.c     |   8 +-
 drivers/gpu/drm/i915/gt/intel_engine_user.c   |   3 +-
 drivers/gpu/drm/i915/gt/intel_gtt.c           |   6 +-
 drivers/gpu/drm/i915/gt/intel_mocs.c          |   4 +-
 drivers/gpu/drm/i915/gt/intel_rc6.c           |   2 +-
 .../gpu/drm/i915/gt/intel_ring_submission.c   |   7 +-
 drivers/gpu/drm/i915/gt/intel_rps.c           |  20 +-
 drivers/gpu/drm/i915/gt/intel_workarounds.c   |   2 +-
 drivers/gpu/drm/i915/gvt/aperture_gm.c        |   6 +-
 drivers/gpu/drm/i915/gvt/cfg_space.c          |  23 +-
 drivers/gpu/drm/i915/gvt/cmd_parser.c         |   4 +-
 drivers/gpu/drm/i915/gvt/display.c            |   6 +-
 drivers/gpu/drm/i915/gvt/dmabuf.c             |   4 +-
 drivers/gpu/drm/i915/gvt/edid.c               |  19 +-
 drivers/gpu/drm/i915/gvt/gtt.c                |  21 +-
 drivers/gpu/drm/i915/gvt/gvt.c                |   4 +-
 drivers/gpu/drm/i915/gvt/handlers.c           |  22 +-
 drivers/gpu/drm/i915/gvt/interrupt.c          |  15 +-
 drivers/gpu/drm/i915/gvt/kvmgt.c              |  10 +-
 drivers/gpu/drm/i915/gvt/mmio.c               |  30 ++-
 drivers/gpu/drm/i915/gvt/mmio_context.c       |   8 +-
 drivers/gpu/drm/i915/gvt/scheduler.c          |   6 +-
 drivers/gpu/drm/i915/gvt/vgpu.c               |   6 +-
 drivers/gpu/drm/i915/i915_drv.c               |  19 +-
 drivers/gpu/drm/i915/i915_gem.c               |   7 +-
 drivers/gpu/drm/i915/i915_gem_fence_reg.c     |  11 +-
 drivers/gpu/drm/i915/i915_irq.c               |  85 ++++---
 drivers/gpu/drm/i915/i915_perf.c              |  38 +--
 drivers/gpu/drm/i915/i915_pmu.c               |   6 +-
 drivers/gpu/drm/i915/intel_csr.c              |   4 +-
 drivers/gpu/drm/i915/intel_pch.c              |  66 +++--
 drivers/gpu/drm/i915/intel_pm.c               |  24 +-
 drivers/gpu/drm/i915/intel_sideband.c         |   7 +-
 drivers/gpu/drm/i915/intel_uncore.c           |  54 +++--
 include/drm/drm_print.h                       |  29 +++
 77 files changed, 1000 insertions(+), 722 deletions(-)

-- 
2.23.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[[Intel-gfx] [PATCH v2 01/10] drm/print: introduce new struct drm_device based WARN* macros

[Pankaj Bharadiya]

Add new struct drm_device based WARN* macros. These are modeled after
the core kernel device based WARN* macros. These would be preferred
over the regular WARN* macros, where possible.

These macros include device information in the backtrace, so we know
what device the warnings originate from.

Knowing the device specific information in the backtrace would be
helpful in development all around.

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
---
 include/drm/drm_print.h | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/include/drm/drm_print.h b/include/drm/drm_print.h
index 8f99d389792d..894a0b9437e2 100644
--- a/include/drm/drm_print.h
+++ b/include/drm/drm_print.h
@@ -553,4 +553,33 @@ void __drm_err(const char *format, ...);
 #define DRM_DEBUG_PRIME_RATELIMITED(fmt, ...)				\
 	DRM_DEV_DEBUG_PRIME_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
 
+/*
+ * struct drm_device based WARNs
+ *
+ * drm_WARN*() acts like WARN*(), but with the key difference of
+ * using device specific information so that we know from which device
+ * warning is originating from.
+ *
+ * Prefer drm_device based drm_WARN* over regular WARN*
+ */
+
+/* Helper for struct drm_device based WARNs */
+#define drm_WARN(drm, condition, format, arg...)			\
+	WARN(condition, "%s %s: " format,				\
+			dev_driver_string((drm)->dev),			\
+			dev_name((drm)->dev), ## arg)
+
+#define drm_WARN_ONCE(drm, condition, format, arg...)			\
+	WARN_ONCE(condition, "%s %s: " format,				\
+			dev_driver_string((drm)->dev),			\
+			dev_name((drm)->dev), ## arg)
+
+#define drm_WARN_ON(drm, x)						\
+	drm_WARN((drm), (x), "%s",					\
+		 "drm_WARN_ON(" __stringify(x) ")")
+
+#define drm_WARN_ON_ONCE(drm, x)					\
+	drm_WARN_ONCE((drm), (x), "%s",					\
+		      "drm_WARN_ON_ONCE(" __stringify(x) ")")
+
 #endif /* DRM_PRINT_H_ */
-- 
2.23.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[[Intel-gfx] [PATCH v2 02/10] drm/i915/display: Make WARN* drm specific where drm_device ptr is available

[Pankaj Bharadiya]

Drm specific drm_WARN* calls include device information in the
backtrace, so we know what device the warnings originate from.

Covert all the calls of WARN* with device specific drm_WARN*
variants in functions where drm_device struct pointer is readily
available.

The conversion was done automatically with below coccinelle semantic
patch. checkpatch errors/warnings are fixed manually.

@rule1@
identifier func, T;
@@
func(...) {
...
struct drm_device *T = ...;
<...
(
-WARN(
+drm_WARN(T,
...)
|
-WARN_ON(
+drm_WARN_ON(T,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(T,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(T,
...)
)
...>
}

@rule2@
identifier func, T;
@@
func(struct drm_device *T,...) {
<...
(
-WARN(
+drm_WARN(T,
...)
|
-WARN_ON(
+drm_WARN_ON(T,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(T,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(T,
...)
)
...>
}

command: spatch --sp-file <script> --dir drivers/gpu/drm/i915/display \
					--linux-spacing --in-place

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
---
 .../gpu/drm/i915/display/intel_connector.c    |  3 +-
 drivers/gpu/drm/i915/display/intel_ddi.c      | 10 +--
 drivers/gpu/drm/i915/display/intel_display.c  | 63 ++++++++++---------
 drivers/gpu/drm/i915/display/intel_dp.c       | 20 +++---
 drivers/gpu/drm/i915/display/intel_dpll_mgr.c |  2 +-
 .../i915/display/intel_dsi_dcs_backlight.c    |  2 +-
 drivers/gpu/drm/i915/display/intel_fbdev.c    | 13 ++--
 drivers/gpu/drm/i915/display/intel_hdmi.c     | 14 ++---
 drivers/gpu/drm/i915/display/intel_hotplug.c  |  2 +-
 drivers/gpu/drm/i915/display/intel_lvds.c     |  4 +-
 drivers/gpu/drm/i915/display/intel_pipe_crc.c |  4 +-
 drivers/gpu/drm/i915/display/intel_sdvo.c     |  7 ++-
 12 files changed, 79 insertions(+), 65 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_connector.c b/drivers/gpu/drm/i915/display/intel_connector.c
index 1133c4e97bb4..263ed1079a1d 100644
--- a/drivers/gpu/drm/i915/display/intel_connector.c
+++ b/drivers/gpu/drm/i915/display/intel_connector.c
@@ -162,7 +162,8 @@ enum pipe intel_connector_get_pipe(struct intel_connector *connector)
 {
 	struct drm_device *dev = connector->base.dev;
 
-	WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
+	drm_WARN_ON(dev,
+		    !drm_modeset_is_locked(&dev->mode_config.connection_mutex));
 
 	if (!connector->base.state->crtc)
 		return INVALID_PIPE;
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 33f1dc3d7c1a..a93c02558b6d 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -1260,8 +1260,9 @@ intel_ddi_get_crtc_encoder(struct intel_crtc *crtc)
 	}
 
 	if (num_encoders != 1)
-		WARN(1, "%d encoders on crtc for pipe %c\n", num_encoders,
-		     pipe_name(crtc->pipe));
+		drm_WARN(dev, 1, "%d encoders on crtc for pipe %c\n",
+			 num_encoders,
+			 pipe_name(crtc->pipe));
 
 	BUG_ON(ret == NULL);
 	return ret;
@@ -1983,10 +1984,11 @@ int intel_ddi_toggle_hdcp_signalling(struct intel_encoder *intel_encoder,
 
 	wakeref = intel_display_power_get_if_enabled(dev_priv,
 						     intel_encoder->power_domain);
-	if (WARN_ON(!wakeref))
+	if (drm_WARN_ON(dev, !wakeref))
 		return -ENXIO;
 
-	if (WARN_ON(!intel_encoder->get_hw_state(intel_encoder, &pipe))) {
+	if (drm_WARN_ON(dev,
+			!intel_encoder->get_hw_state(intel_encoder, &pipe))) {
 		ret = -EIO;
 		goto out;
 	}
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 19ea842cfd84..6856351073cb 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -883,7 +883,7 @@ static bool vlv_PLL_is_optimal(struct drm_device *dev, int target_freq,
 		return calculated_clock->p > best_clock->p;
 	}
 
-	if (WARN_ON_ONCE(!target_freq))
+	if (drm_WARN_ON_ONCE(dev, !target_freq))
 		return false;
 
 	*error_ppm = div_u64(1000000ULL *
@@ -2211,11 +2211,11 @@ intel_pin_and_fence_fb_obj(struct drm_framebuffer *fb,
 	unsigned int pinctl;
 	u32 alignment;
 
-	if (WARN_ON(!i915_gem_object_is_framebuffer(obj)))
+	if (drm_WARN_ON(dev, !i915_gem_object_is_framebuffer(obj)))
 		return ERR_PTR(-EINVAL);
 
 	alignment = intel_surf_alignment(fb, 0);
-	if (WARN_ON(alignment && !is_power_of_2(alignment)))
+	if (drm_WARN_ON(dev, alignment && !is_power_of_2(alignment)))
 		return ERR_PTR(-EINVAL);
 
 	/* Note that the w/a also requires 64 PTE of padding following the
@@ -4791,7 +4791,7 @@ __intel_display_resume(struct drm_device *dev,
 
 	ret = drm_atomic_helper_commit_duplicated_state(state, ctx);
 
-	WARN_ON(ret == -EDEADLK);
+	drm_WARN_ON(dev, ret == -EDEADLK);
 	return ret;
 }
 
@@ -5812,7 +5812,7 @@ static void ilk_pch_enable(const struct intel_atomic_state *state,
 			temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
 
 		port = intel_get_crtc_new_encoder(state, crtc_state)->port;
-		WARN_ON(port < PORT_B || port > PORT_D);
+		drm_WARN_ON(dev, port < PORT_B || port > PORT_D);
 		temp |= TRANS_DP_PORT_SEL(port);
 
 		I915_WRITE(reg, temp);
@@ -6218,11 +6218,13 @@ void hsw_enable_ips(const struct intel_crtc_state *crtc_state)
 	 * This function is called from post_plane_update, which is run after
 	 * a vblank wait.
 	 */
-	WARN_ON(!(crtc_state->active_planes & ~BIT(PLANE_CURSOR)));
+	drm_WARN_ON(dev, !(crtc_state->active_planes & ~BIT(PLANE_CURSOR)));
 
 	if (IS_BROADWELL(dev_priv)) {
-		WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL,
-						IPS_ENABLE | IPS_PCODE_CONTROL));
+		drm_WARN_ON(dev, sandybridge_pcode_write(dev_priv,
+							 DISPLAY_IPS_CONTROL,
+							 IPS_ENABLE |
+							 IPS_PCODE_CONTROL));
 		/* Quoting Art Runyan: "its not safe to expect any particular
 		 * value in IPS_CTL bit 31 after enabling IPS through the
 		 * mailbox." Moreover, the mailbox may return a bogus state,
@@ -6250,7 +6252,9 @@ void hsw_disable_ips(const struct intel_crtc_state *crtc_state)
 		return;
 
 	if (IS_BROADWELL(dev_priv)) {
-		WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0));
+		drm_WARN_ON(dev,
+			    sandybridge_pcode_write(dev_priv,
+						    DISPLAY_IPS_CONTROL, 0));
 		/*
 		 * Wait for PCODE to finish disabling IPS. The BSpec specified
 		 * 42ms timeout value leads to occasional timeouts so use 100ms
@@ -9087,7 +9091,7 @@ i9xx_get_initial_plane_config(struct intel_crtc *crtc,
 	if (!plane->get_hw_state(plane, &pipe))
 		return;
 
-	WARN_ON(pipe != crtc->pipe);
+	drm_WARN_ON(dev, pipe != crtc->pipe);
 
 	intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
 	if (!intel_fb) {
@@ -10284,7 +10288,7 @@ skl_get_initial_plane_config(struct intel_crtc *crtc,
 	if (!plane->get_hw_state(plane, &pipe))
 		return;
 
-	WARN_ON(pipe != crtc->pipe);
+	drm_WARN_ON(dev, pipe != crtc->pipe);
 
 	intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
 	if (!intel_fb) {
@@ -10415,8 +10419,8 @@ static void ilk_get_pfit_config(struct intel_crtc *crtc,
 		 * ivb/hsw (since we don't use the higher upscaling modes which
 		 * differentiates them) so just WARN about this case for now. */
 		if (IS_GEN(dev_priv, 7)) {
-			WARN_ON((tmp & PF_PIPE_SEL_MASK_IVB) !=
-				PF_PIPE_SEL_IVB(crtc->pipe));
+			drm_WARN_ON(dev, (tmp & PF_PIPE_SEL_MASK_IVB) !=
+				    PF_PIPE_SEL_IVB(crtc->pipe));
 		}
 	}
 }
@@ -10513,7 +10517,8 @@ static bool ilk_get_pipe_config(struct intel_crtc *crtc,
 			intel_get_shared_dpll_by_id(dev_priv, pll_id);
 		pll = pipe_config->shared_dpll;
 
-		WARN_ON(!pll->info->funcs->get_hw_state(dev_priv, pll,
+		drm_WARN_ON(dev,
+			    !pll->info->funcs->get_hw_state(dev_priv, pll,
 						&pipe_config->dpll_hw_state));
 
 		tmp = pipe_config->dpll_hw_state.dpll;
@@ -10738,8 +10743,9 @@ static bool hsw_get_transcoder_state(struct intel_crtc *crtc,
 
 		switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
 		default:
-			WARN(1, "unknown pipe linked to transcoder %s\n",
-			     transcoder_name(panel_transcoder));
+			drm_WARN(dev, 1,
+				 "unknown pipe linked to transcoder %s\n",
+				 transcoder_name(panel_transcoder));
 			/* fall through */
 		case TRANS_DDI_EDP_INPUT_A_ONOFF:
 			force_thru = true;
@@ -10767,11 +10773,11 @@ static bool hsw_get_transcoder_state(struct intel_crtc *crtc,
 	/*
 	 * Valid combos: none, eDP, DSI0, DSI1, DSI0+DSI1
 	 */
-	WARN_ON((enabled_panel_transcoders & BIT(TRANSCODER_EDP)) &&
-		enabled_panel_transcoders != BIT(TRANSCODER_EDP));
+	drm_WARN_ON(dev, (enabled_panel_transcoders & BIT(TRANSCODER_EDP)) &&
+		    enabled_panel_transcoders != BIT(TRANSCODER_EDP));
 
 	power_domain = POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder);
-	WARN_ON(*power_domain_mask & BIT_ULL(power_domain));
+	drm_WARN_ON(dev, *power_domain_mask & BIT_ULL(power_domain));
 
 	wf = intel_display_power_get_if_enabled(dev_priv, power_domain);
 	if (!wf)
@@ -10805,7 +10811,7 @@ static bool bxt_get_dsi_transcoder_state(struct intel_crtc *crtc,
 			cpu_transcoder = TRANSCODER_DSI_C;
 
 		power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder);
-		WARN_ON(*power_domain_mask & BIT_ULL(power_domain));
+		drm_WARN_ON(dev, *power_domain_mask & BIT_ULL(power_domain));
 
 		wf = intel_display_power_get_if_enabled(dev_priv, power_domain);
 		if (!wf)
@@ -11706,7 +11712,7 @@ int intel_get_load_detect_pipe(struct drm_connector *connector,
 
 	old->restore_state = NULL;
 
-	WARN_ON(!drm_modeset_is_locked(&config->connection_mutex));
+	drm_WARN_ON(dev, !drm_modeset_is_locked(&config->connection_mutex));
 
 	/*
 	 * Algorithm gets a little messy:
@@ -12956,12 +12962,12 @@ static bool check_digital_port_conflicts(struct intel_atomic_state *state)
 
 		encoder = to_intel_encoder(connector_state->best_encoder);
 
-		WARN_ON(!connector_state->crtc);
+		drm_WARN_ON(dev, !connector_state->crtc);
 
 		switch (encoder->type) {
 			unsigned int port_mask;
 		case INTEL_OUTPUT_DDI:
-			if (WARN_ON(!HAS_DDI(to_i915(dev))))
+			if (drm_WARN_ON(dev, !HAS_DDI(to_i915(dev))))
 				break;
 			/* else, fall through */
 		case INTEL_OUTPUT_DP:
@@ -17338,12 +17344,12 @@ static void sanitize_watermarks(struct drm_device *dev)
 	if (ret == -EDEADLK) {
 		drm_modeset_backoff(&ctx);
 		goto retry;
-	} else if (WARN_ON(ret)) {
+	} else if (drm_WARN_ON(dev, ret)) {
 		goto fail;
 	}
 
 	state = drm_atomic_helper_duplicate_state(dev, &ctx);
-	if (WARN_ON(IS_ERR(state)))
+	if (drm_WARN_ON(dev, IS_ERR(state)))
 		goto fail;
 
 	intel_state = to_intel_atomic_state(state);
@@ -17369,7 +17375,8 @@ static void sanitize_watermarks(struct drm_device *dev)
 		 * If this actually happens, we'll have to just leave the
 		 * BIOS-programmed watermarks untouched and hope for the best.
 		 */
-		WARN(true, "Could not determine valid watermarks for inherited state\n");
+		drm_WARN(dev, true,
+			 "Could not determine valid watermarks for inherited state\n");
 		goto put_state;
 	}
 
@@ -18187,7 +18194,7 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 
 		if (crtc_state->hw.active) {
 			min_cdclk = intel_crtc_compute_min_cdclk(crtc_state);
-			if (WARN_ON(min_cdclk < 0))
+			if (drm_WARN_ON(dev, min_cdclk < 0))
 				min_cdclk = 0;
 		}
 
@@ -18398,7 +18405,7 @@ intel_modeset_setup_hw_state(struct drm_device *dev,
 		u64 put_domains;
 
 		put_domains = modeset_get_crtc_power_domains(crtc_state);
-		if (WARN_ON(put_domains))
+		if (drm_WARN_ON(dev, put_domains))
 			modeset_put_power_domains(dev_priv, put_domains);
 	}
 
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 4074d83b1a5f..00df83de5001 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -7331,7 +7331,8 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
 	 * with an already powered-on LVDS power sequencer.
 	 */
 	if (intel_get_lvds_encoder(dev_priv)) {
-		WARN_ON(!(HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv)));
+		drm_WARN_ON(dev,
+			    !(HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv)));
 		DRM_INFO("LVDS was detected, not registering eDP\n");
 
 		return false;
@@ -7462,10 +7463,10 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 	INIT_WORK(&intel_connector->modeset_retry_work,
 		  intel_dp_modeset_retry_work_fn);
 
-	if (WARN(intel_dig_port->max_lanes < 1,
-		 "Not enough lanes (%d) for DP on [ENCODER:%d:%s]\n",
-		 intel_dig_port->max_lanes, intel_encoder->base.base.id,
-		 intel_encoder->base.name))
+	if (drm_WARN(dev, intel_dig_port->max_lanes < 1,
+		     "Not enough lanes (%d) for DP on [ENCODER:%d:%s]\n",
+		     intel_dig_port->max_lanes, intel_encoder->base.base.id,
+		     intel_encoder->base.name))
 		return false;
 
 	intel_dp_set_source_rates(intel_dp);
@@ -7483,7 +7484,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 		 * Currently we don't support eDP on TypeC ports, although in
 		 * theory it could work on TypeC legacy ports.
 		 */
-		WARN_ON(intel_phy_is_tc(dev_priv, phy));
+		drm_WARN_ON(dev, intel_phy_is_tc(dev_priv, phy));
 		type = DRM_MODE_CONNECTOR_eDP;
 	} else {
 		type = DRM_MODE_CONNECTOR_DisplayPort;
@@ -7501,9 +7502,10 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 		intel_encoder->type = INTEL_OUTPUT_EDP;
 
 	/* eDP only on port B and/or C on vlv/chv */
-	if (WARN_ON((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
-		    intel_dp_is_edp(intel_dp) &&
-		    port != PORT_B && port != PORT_C))
+	if (drm_WARN_ON(dev, (IS_VALLEYVIEW(dev_priv) ||
+			      IS_CHERRYVIEW(dev_priv)) &&
+			intel_dp_is_edp(intel_dp) &&
+			port != PORT_B && port != PORT_C))
 		return false;
 
 	DRM_DEBUG_KMS("Adding %s connector on [ENCODER:%d:%s]\n",
diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
index c75e34d87111..d7bed6df2d6c 100644
--- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
@@ -3777,7 +3777,7 @@ void intel_shared_dpll_init(struct drm_device *dev)
 	dpll_info = dpll_mgr->dpll_info;
 
 	for (i = 0; dpll_info[i].name; i++) {
-		WARN_ON(i != dpll_info[i].id);
+		drm_WARN_ON(dev, i != dpll_info[i].id);
 		dev_priv->shared_dplls[i].info = &dpll_info[i];
 	}
 
diff --git a/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c b/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
index c87838843d0b..d3ff2c2580b2 100644
--- a/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
+++ b/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
@@ -166,7 +166,7 @@ int intel_dsi_dcs_init_backlight_funcs(struct intel_connector *intel_connector)
 	if (dev_priv->vbt.backlight.type != INTEL_BACKLIGHT_DSI_DCS)
 		return -ENODEV;
 
-	if (WARN_ON(encoder->type != INTEL_OUTPUT_DSI))
+	if (drm_WARN_ON(dev, encoder->type != INTEL_OUTPUT_DSI))
 		return -EINVAL;
 
 	panel->backlight.setup = dcs_setup_backlight;
diff --git a/drivers/gpu/drm/i915/display/intel_fbdev.c b/drivers/gpu/drm/i915/display/intel_fbdev.c
index 1e98e432c9fa..b4ff77225236 100644
--- a/drivers/gpu/drm/i915/display/intel_fbdev.c
+++ b/drivers/gpu/drm/i915/display/intel_fbdev.c
@@ -191,7 +191,7 @@ static int intelfb_create(struct drm_fb_helper *helper,
 		drm_framebuffer_put(&intel_fb->base);
 		intel_fb = ifbdev->fb = NULL;
 	}
-	if (!intel_fb || WARN_ON(!intel_fb_obj(&intel_fb->base))) {
+	if (!intel_fb || drm_WARN_ON(dev, !intel_fb_obj(&intel_fb->base))) {
 		DRM_DEBUG_KMS("no BIOS fb, allocating a new one\n");
 		ret = intelfb_alloc(helper, sizes);
 		if (ret)
@@ -410,9 +410,9 @@ static bool intel_fbdev_init_bios(struct drm_device *dev,
 		if (!crtc->state->active)
 			continue;
 
-		WARN(!crtc->primary->state->fb,
-		     "re-used BIOS config but lost an fb on crtc %d\n",
-		     crtc->base.id);
+		drm_WARN(dev, !crtc->primary->state->fb,
+			 "re-used BIOS config but lost an fb on crtc %d\n",
+			 crtc->base.id);
 	}
 
 
@@ -439,7 +439,8 @@ int intel_fbdev_init(struct drm_device *dev)
 	struct intel_fbdev *ifbdev;
 	int ret;
 
-	if (WARN_ON(!HAS_DISPLAY(dev_priv) || !INTEL_DISPLAY_ENABLED(dev_priv)))
+	if (drm_WARN_ON(dev, !HAS_DISPLAY(dev_priv) ||
+			!INTEL_DISPLAY_ENABLED(dev_priv)))
 		return -ENODEV;
 
 	ifbdev = kzalloc(sizeof(struct intel_fbdev), GFP_KERNEL);
@@ -569,7 +570,7 @@ void intel_fbdev_set_suspend(struct drm_device *dev, int state, bool synchronous
 		 * to all the printk activity.  Try to keep it out of the hot
 		 * path of resume if possible.
 		 */
-		WARN_ON(state != FBINFO_STATE_RUNNING);
+		drm_WARN_ON(dev, state != FBINFO_STATE_RUNNING);
 		if (!console_trylock()) {
 			/* Don't block our own workqueue as this can
 			 * be run in parallel with other i915.ko tasks.
diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index 93ac0f296852..da126c8618d2 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -72,8 +72,8 @@ assert_hdmi_port_disabled(struct intel_hdmi *intel_hdmi)
 
 	enabled_bits = HAS_DDI(dev_priv) ? DDI_BUF_CTL_ENABLE : SDVO_ENABLE;
 
-	WARN(I915_READ(intel_hdmi->hdmi_reg) & enabled_bits,
-	     "HDMI port enabled, expecting disabled\n");
+	drm_WARN(dev, I915_READ(intel_hdmi->hdmi_reg) & enabled_bits,
+		 "HDMI port enabled, expecting disabled\n");
 }
 
 static void
@@ -3139,13 +3139,13 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
 	DRM_DEBUG_KMS("Adding HDMI connector on [ENCODER:%d:%s]\n",
 		      intel_encoder->base.base.id, intel_encoder->base.name);
 
-	if (INTEL_GEN(dev_priv) < 12 && WARN_ON(port == PORT_A))
+	if (INTEL_GEN(dev_priv) < 12 && drm_WARN_ON(dev, port == PORT_A))
 		return;
 
-	if (WARN(intel_dig_port->max_lanes < 4,
-		 "Not enough lanes (%d) for HDMI on [ENCODER:%d:%s]\n",
-		 intel_dig_port->max_lanes, intel_encoder->base.base.id,
-		 intel_encoder->base.name))
+	if (drm_WARN(dev, intel_dig_port->max_lanes < 4,
+		     "Not enough lanes (%d) for HDMI on [ENCODER:%d:%s]\n",
+		     intel_dig_port->max_lanes, intel_encoder->base.base.id,
+		     intel_encoder->base.name))
 		return;
 
 	intel_hdmi->ddc_bus = intel_hdmi_ddc_pin(dev_priv, port);
diff --git a/drivers/gpu/drm/i915/display/intel_hotplug.c b/drivers/gpu/drm/i915/display/intel_hotplug.c
index 99d3a3c7989e..f768cef95001 100644
--- a/drivers/gpu/drm/i915/display/intel_hotplug.c
+++ b/drivers/gpu/drm/i915/display/intel_hotplug.c
@@ -281,7 +281,7 @@ intel_encoder_hotplug(struct intel_encoder *encoder,
 	struct drm_device *dev = connector->base.dev;
 	enum drm_connector_status old_status;
 
-	WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
+	drm_WARN_ON(dev, !mutex_is_locked(&dev->mode_config.mutex));
 	old_status = connector->base.status;
 
 	connector->base.status =
diff --git a/drivers/gpu/drm/i915/display/intel_lvds.c b/drivers/gpu/drm/i915/display/intel_lvds.c
index 10696bb99dcf..b78c14dd712e 100644
--- a/drivers/gpu/drm/i915/display/intel_lvds.c
+++ b/drivers/gpu/drm/i915/display/intel_lvds.c
@@ -827,8 +827,8 @@ void intel_lvds_init(struct drm_i915_private *dev_priv)
 
 	/* Skip init on machines we know falsely report LVDS */
 	if (dmi_check_system(intel_no_lvds)) {
-		WARN(!dev_priv->vbt.int_lvds_support,
-		     "Useless DMI match. Internal LVDS support disabled by VBT\n");
+		drm_WARN(dev, !dev_priv->vbt.int_lvds_support,
+			 "Useless DMI match. Internal LVDS support disabled by VBT\n");
 		return;
 	}
 
diff --git a/drivers/gpu/drm/i915/display/intel_pipe_crc.c b/drivers/gpu/drm/i915/display/intel_pipe_crc.c
index 520408e83681..6bf6e26d6493 100644
--- a/drivers/gpu/drm/i915/display/intel_pipe_crc.c
+++ b/drivers/gpu/drm/i915/display/intel_pipe_crc.c
@@ -110,8 +110,8 @@ static int i9xx_pipe_crc_auto_source(struct drm_i915_private *dev_priv,
 				*source = INTEL_PIPE_CRC_SOURCE_DP_D;
 				break;
 			default:
-				WARN(1, "nonexisting DP port %c\n",
-				     port_name(dig_port->base.port));
+				drm_WARN(dev, 1, "nonexisting DP port %c\n",
+					 port_name(dig_port->base.port));
 				break;
 			}
 			break;
diff --git a/drivers/gpu/drm/i915/display/intel_sdvo.c b/drivers/gpu/drm/i915/display/intel_sdvo.c
index e8819fd21e03..7a685328d376 100644
--- a/drivers/gpu/drm/i915/display/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/display/intel_sdvo.c
@@ -1667,9 +1667,10 @@ static void intel_sdvo_get_config(struct intel_encoder *encoder,
 		}
 	}
 
-	WARN(encoder_pixel_multiplier != pipe_config->pixel_multiplier,
-	     "SDVO pixel multiplier mismatch, port: %i, encoder: %i\n",
-	     pipe_config->pixel_multiplier, encoder_pixel_multiplier);
+	drm_WARN(dev,
+		 encoder_pixel_multiplier != pipe_config->pixel_multiplier,
+		 "SDVO pixel multiplier mismatch, port: %i, encoder: %i\n",
+		 pipe_config->pixel_multiplier, encoder_pixel_multiplier);
 
 	if (sdvox & HDMI_COLOR_RANGE_16_235)
 		pipe_config->limited_color_range = true;
-- 
2.23.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [Intel-gfx] [ [PATCH v2 01/10] drm/print: introduce new struct drm_device based WARN* macros

[Jani Nikula]

On Wed, 22 Jan 2020, Sean Paul <sean@poorly.run> wrote:
> On Tue, Jan 14, 2020 at 10:49 PM Pankaj Bharadiya
> <pankaj.laxminarayan.bharadiya@intel.com> wrote:
>>
>> Add new struct drm_device based WARN* macros. These are modeled after
>> the core kernel device based WARN* macros. These would be preferred
>> over the regular WARN* macros, where possible.
>>
>> These macros include device information in the backtrace, so we know
>> what device the warnings originate from.
>>
>> Knowing the device specific information in the backtrace would be
>> helpful in development all around.
>>
>> Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
>
> Acked-by: Sean Paul <sean@poorly.run>

Maarten and Maxime also provided their acks on IRC. Thanks for the
review and acks, I've pushed this to a topic branch, sent the pull
request for drm-misc-next [1], and pulled the same to
drm-intel-next-queued [2] to unblock further work there.

BR,
Jani.


[1] http://lore.kernel.org/r/87eevrecnf.fsf@intel.com
[2] 7c7d5b1ce739 ("Merge tag 'topic/drm-warn-2020-01-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next-queued")



>
>> ---
>>  include/drm/drm_print.h | 29 +++++++++++++++++++++++++++++
>>  1 file changed, 29 insertions(+)
>>
>> diff --git a/include/drm/drm_print.h b/include/drm/drm_print.h
>> index 8f99d389792d..894a0b9437e2 100644
>> --- a/include/drm/drm_print.h
>> +++ b/include/drm/drm_print.h
>> @@ -553,4 +553,33 @@ void __drm_err(const char *format, ...);
>>  #define DRM_DEBUG_PRIME_RATELIMITED(fmt, ...)                          \
>>         DRM_DEV_DEBUG_PRIME_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
>>
>> +/*
>> + * struct drm_device based WARNs
>> + *
>> + * drm_WARN*() acts like WARN*(), but with the key difference of
>> + * using device specific information so that we know from which device
>> + * warning is originating from.
>> + *
>> + * Prefer drm_device based drm_WARN* over regular WARN*
>> + */
>> +
>> +/* Helper for struct drm_device based WARNs */
>> +#define drm_WARN(drm, condition, format, arg...)                       \
>> +       WARN(condition, "%s %s: " format,                               \
>> +                       dev_driver_string((drm)->dev),                  \
>> +                       dev_name((drm)->dev), ## arg)
>> +
>> +#define drm_WARN_ONCE(drm, condition, format, arg...)                  \
>> +       WARN_ONCE(condition, "%s %s: " format,                          \
>> +                       dev_driver_string((drm)->dev),                  \
>> +                       dev_name((drm)->dev), ## arg)
>> +
>> +#define drm_WARN_ON(drm, x)                                            \
>> +       drm_WARN((drm), (x), "%s",                                      \
>> +                "drm_WARN_ON(" __stringify(x) ")")
>> +
>> +#define drm_WARN_ON_ONCE(drm, x)                                       \
>> +       drm_WARN_ONCE((drm), (x), "%s",                                 \
>> +                     "drm_WARN_ON_ONCE(" __stringify(x) ")")
>> +
>>  #endif /* DRM_PRINT_H_ */
>> --
>> 2.23.0
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [Intel-gfx] [ [PATCH v2 01/10] drm/print: introduce new struct drm_device based WARN* macros

[Sean Paul]

On Tue, Jan 14, 2020 at 10:49 PM Pankaj Bharadiya
<pankaj.laxminarayan.bharadiya@intel.com> wrote:
>
> Add new struct drm_device based WARN* macros. These are modeled after
> the core kernel device based WARN* macros. These would be preferred
> over the regular WARN* macros, where possible.
>
> These macros include device information in the backtrace, so we know
> what device the warnings originate from.
>
> Knowing the device specific information in the backtrace would be
> helpful in development all around.
>
> Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>

Acked-by: Sean Paul <sean@poorly.run>

> ---
>  include/drm/drm_print.h | 29 +++++++++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
>
> diff --git a/include/drm/drm_print.h b/include/drm/drm_print.h
> index 8f99d389792d..894a0b9437e2 100644
> --- a/include/drm/drm_print.h
> +++ b/include/drm/drm_print.h
> @@ -553,4 +553,33 @@ void __drm_err(const char *format, ...);
>  #define DRM_DEBUG_PRIME_RATELIMITED(fmt, ...)                          \
>         DRM_DEV_DEBUG_PRIME_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
>
> +/*
> + * struct drm_device based WARNs
> + *
> + * drm_WARN*() acts like WARN*(), but with the key difference of
> + * using device specific information so that we know from which device
> + * warning is originating from.
> + *
> + * Prefer drm_device based drm_WARN* over regular WARN*
> + */
> +
> +/* Helper for struct drm_device based WARNs */
> +#define drm_WARN(drm, condition, format, arg...)                       \
> +       WARN(condition, "%s %s: " format,                               \
> +                       dev_driver_string((drm)->dev),                  \
> +                       dev_name((drm)->dev), ## arg)
> +
> +#define drm_WARN_ONCE(drm, condition, format, arg...)                  \
> +       WARN_ONCE(condition, "%s %s: " format,                          \
> +                       dev_driver_string((drm)->dev),                  \
> +                       dev_name((drm)->dev), ## arg)
> +
> +#define drm_WARN_ON(drm, x)                                            \
> +       drm_WARN((drm), (x), "%s",                                      \
> +                "drm_WARN_ON(" __stringify(x) ")")
> +
> +#define drm_WARN_ON_ONCE(drm, x)                                       \
> +       drm_WARN_ONCE((drm), (x), "%s",                                 \
> +                     "drm_WARN_ON_ONCE(" __stringify(x) ")")
> +
>  #endif /* DRM_PRINT_H_ */
> --
> 2.23.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [[Intel-gfx] [PATCH v2 01/10] drm/print: introduce new struct drm_device based WARN* macros

[Sam Ravnborg]

On Tue, Jan 21, 2020 at 10:39:34AM +0200, Jani Nikula wrote:
> On Wed, 15 Jan 2020, Jani Nikula <jani.nikula@intel.com> wrote:
> > On Wed, 15 Jan 2020, Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> wrote:
> >> Add new struct drm_device based WARN* macros. These are modeled after
> >> the core kernel device based WARN* macros. These would be preferred
> >> over the regular WARN* macros, where possible.
> >>
> >> These macros include device information in the backtrace, so we know
> >> what device the warnings originate from.
> >>
> >> Knowing the device specific information in the backtrace would be
> >> helpful in development all around.
> >>
> >> Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
> >
> > Reviewed-by: Jani Nikula <jani.nikula@intel.com>
> 
> All, I'd really appreciate acks or reviews on this one to unblock the
> rest. I think the patch is fine, but I'd like wider approval before
> merging.

Patch looks good:

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>

	Sam
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [[Intel-gfx] [PATCH v2 01/10] drm/print: introduce new struct drm_device based WARN* macros

[Jani Nikula]

On Wed, 15 Jan 2020, Jani Nikula <jani.nikula@intel.com> wrote:
> On Wed, 15 Jan 2020, Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> wrote:
>> Add new struct drm_device based WARN* macros. These are modeled after
>> the core kernel device based WARN* macros. These would be preferred
>> over the regular WARN* macros, where possible.
>>
>> These macros include device information in the backtrace, so we know
>> what device the warnings originate from.
>>
>> Knowing the device specific information in the backtrace would be
>> helpful in development all around.
>>
>> Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
>
> Reviewed-by: Jani Nikula <jani.nikula@intel.com>

All, I'd really appreciate acks or reviews on this one to unblock the
rest. I think the patch is fine, but I'd like wider approval before
merging.

I'm thinking of putting this in a topic branch and merging to both
drm-intel-next-queued and drm-misc-next, so we can start converting i915
to use this.

BR,
Jani.


>
>> ---
>>  include/drm/drm_print.h | 29 +++++++++++++++++++++++++++++
>>  1 file changed, 29 insertions(+)
>>
>> diff --git a/include/drm/drm_print.h b/include/drm/drm_print.h
>> index 8f99d389792d..894a0b9437e2 100644
>> --- a/include/drm/drm_print.h
>> +++ b/include/drm/drm_print.h
>> @@ -553,4 +553,33 @@ void __drm_err(const char *format, ...);
>>  #define DRM_DEBUG_PRIME_RATELIMITED(fmt, ...)				\
>>  	DRM_DEV_DEBUG_PRIME_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
>>  
>> +/*
>> + * struct drm_device based WARNs
>> + *
>> + * drm_WARN*() acts like WARN*(), but with the key difference of
>> + * using device specific information so that we know from which device
>> + * warning is originating from.
>> + *
>> + * Prefer drm_device based drm_WARN* over regular WARN*
>> + */
>> +
>> +/* Helper for struct drm_device based WARNs */
>> +#define drm_WARN(drm, condition, format, arg...)			\
>> +	WARN(condition, "%s %s: " format,				\
>> +			dev_driver_string((drm)->dev),			\
>> +			dev_name((drm)->dev), ## arg)
>> +
>> +#define drm_WARN_ONCE(drm, condition, format, arg...)			\
>> +	WARN_ONCE(condition, "%s %s: " format,				\
>> +			dev_driver_string((drm)->dev),			\
>> +			dev_name((drm)->dev), ## arg)
>> +
>> +#define drm_WARN_ON(drm, x)						\
>> +	drm_WARN((drm), (x), "%s",					\
>> +		 "drm_WARN_ON(" __stringify(x) ")")
>> +
>> +#define drm_WARN_ON_ONCE(drm, x)					\
>> +	drm_WARN_ONCE((drm), (x), "%s",					\
>> +		      "drm_WARN_ON_ONCE(" __stringify(x) ")")
>> +
>>  #endif /* DRM_PRINT_H_ */

-- 
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [[Intel-gfx] [PATCH v2 01/10] drm/print: introduce new struct drm_device based WARN* macros

[Jani Nikula]

On Wed, 15 Jan 2020, Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> wrote:
> Add new struct drm_device based WARN* macros. These are modeled after
> the core kernel device based WARN* macros. These would be preferred
> over the regular WARN* macros, where possible.
>
> These macros include device information in the backtrace, so we know
> what device the warnings originate from.
>
> Knowing the device specific information in the backtrace would be
> helpful in development all around.
>
> Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>

Reviewed-by: Jani Nikula <jani.nikula@intel.com>

> ---
>  include/drm/drm_print.h | 29 +++++++++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
>
> diff --git a/include/drm/drm_print.h b/include/drm/drm_print.h
> index 8f99d389792d..894a0b9437e2 100644
> --- a/include/drm/drm_print.h
> +++ b/include/drm/drm_print.h
> @@ -553,4 +553,33 @@ void __drm_err(const char *format, ...);
>  #define DRM_DEBUG_PRIME_RATELIMITED(fmt, ...)				\
>  	DRM_DEV_DEBUG_PRIME_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
>  
> +/*
> + * struct drm_device based WARNs
> + *
> + * drm_WARN*() acts like WARN*(), but with the key difference of
> + * using device specific information so that we know from which device
> + * warning is originating from.
> + *
> + * Prefer drm_device based drm_WARN* over regular WARN*
> + */
> +
> +/* Helper for struct drm_device based WARNs */
> +#define drm_WARN(drm, condition, format, arg...)			\
> +	WARN(condition, "%s %s: " format,				\
> +			dev_driver_string((drm)->dev),			\
> +			dev_name((drm)->dev), ## arg)
> +
> +#define drm_WARN_ONCE(drm, condition, format, arg...)			\
> +	WARN_ONCE(condition, "%s %s: " format,				\
> +			dev_driver_string((drm)->dev),			\
> +			dev_name((drm)->dev), ## arg)
> +
> +#define drm_WARN_ON(drm, x)						\
> +	drm_WARN((drm), (x), "%s",					\
> +		 "drm_WARN_ON(" __stringify(x) ")")
> +
> +#define drm_WARN_ON_ONCE(drm, x)					\
> +	drm_WARN_ONCE((drm), (x), "%s",					\
> +		      "drm_WARN_ON_ONCE(" __stringify(x) ")")
> +
>  #endif /* DRM_PRINT_H_ */

-- 
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[[Intel-gfx] [PATCH v2 01/10] drm/print: introduce new struct drm_device based WARN* macros

[Pankaj Bharadiya]

Add new struct drm_device based WARN* macros. These are modeled after
the core kernel device based WARN* macros. These would be preferred
over the regular WARN* macros, where possible.

These macros include device information in the backtrace, so we know
what device the warnings originate from.

Knowing the device specific information in the backtrace would be
helpful in development all around.

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
---
 include/drm/drm_print.h | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/include/drm/drm_print.h b/include/drm/drm_print.h
index 8f99d389792d..894a0b9437e2 100644
--- a/include/drm/drm_print.h
+++ b/include/drm/drm_print.h
@@ -553,4 +553,33 @@ void __drm_err(const char *format, ...);
 #define DRM_DEBUG_PRIME_RATELIMITED(fmt, ...)				\
 	DRM_DEV_DEBUG_PRIME_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
 
+/*
+ * struct drm_device based WARNs
+ *
+ * drm_WARN*() acts like WARN*(), but with the key difference of
+ * using device specific information so that we know from which device
+ * warning is originating from.
+ *
+ * Prefer drm_device based drm_WARN* over regular WARN*
+ */
+
+/* Helper for struct drm_device based WARNs */
+#define drm_WARN(drm, condition, format, arg...)			\
+	WARN(condition, "%s %s: " format,				\
+			dev_driver_string((drm)->dev),			\
+			dev_name((drm)->dev), ## arg)
+
+#define drm_WARN_ONCE(drm, condition, format, arg...)			\
+	WARN_ONCE(condition, "%s %s: " format,				\
+			dev_driver_string((drm)->dev),			\
+			dev_name((drm)->dev), ## arg)
+
+#define drm_WARN_ON(drm, x)						\
+	drm_WARN((drm), (x), "%s",					\
+		 "drm_WARN_ON(" __stringify(x) ")")
+
+#define drm_WARN_ON_ONCE(drm, x)					\
+	drm_WARN_ONCE((drm), (x), "%s",					\
+		      "drm_WARN_ON_ONCE(" __stringify(x) ")")
+
 #endif /* DRM_PRINT_H_ */
-- 
2.23.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel