dri-devel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH RESEND] drm/mcde: Fix Sphinx formatting
@ 2020-02-14 16:38 Jonathan Neuschäfer
  2020-02-14 18:25 ` Daniel Vetter
  0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Neuschäfer @ 2020-02-14 16:38 UTC (permalink / raw)
  To: dri-devel; +Cc: David Airlie, Jonathan Neuschäfer, linux-kernel

- Format the pipe diagram as a monospace block.
- Fix formatting of the list. Without the empty line, the first dash is
  not parsed as a bullet point.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---
Previous copy: https://lore.kernel.org/lkml/20191002153827.23026-2-j.neuschaefer@gmx.net/

It seems that this patch got lost, somehow.
---
 drivers/gpu/drm/mcde/mcde_drv.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/mcde/mcde_drv.c b/drivers/gpu/drm/mcde/mcde_drv.c
index 9a09eba53182..c535abed4765 100644
--- a/drivers/gpu/drm/mcde/mcde_drv.c
+++ b/drivers/gpu/drm/mcde/mcde_drv.c
@@ -20,11 +20,11 @@
  * input formats including most variants of RGB and YUV.
  *
  * The hardware has four display pipes, and the layout is a little
- * bit like this:
+ * bit like this::
  *
- * Memory     -> Overlay -> Channel -> FIFO -> 5 formatters -> DSI/DPI
- * External      0..5       0..3       A,B,    3 x DSI         bridge
- * source 0..9                         C0,C1   2 x DPI
+ *   Memory     -> Overlay -> Channel -> FIFO -> 5 formatters -> DSI/DPI
+ *   External      0..5       0..3       A,B,    3 x DSI         bridge
+ *   source 0..9                         C0,C1   2 x DPI
  *
  * FIFOs A and B are for LCD and HDMI while FIFO CO/C1 are for
  * panels with embedded buffer.
@@ -43,6 +43,7 @@
  * to change as we exploit more of the hardware capabilities.
  *
  * TODO:
+ *
  * - Enabled damaged rectangles using drm_plane_enable_fb_damage_clips()
  *   so we can selectively just transmit the damaged area to a
  *   command-only display.
--
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH RESEND] drm/mcde: Fix Sphinx formatting
  2020-02-14 16:38 [PATCH RESEND] drm/mcde: Fix Sphinx formatting Jonathan Neuschäfer
@ 2020-02-14 18:25 ` Daniel Vetter
  0 siblings, 0 replies; 2+ messages in thread
From: Daniel Vetter @ 2020-02-14 18:25 UTC (permalink / raw)
  To: Jonathan Neuschäfer; +Cc: David Airlie, dri-devel, linux-kernel

On Fri, Feb 14, 2020 at 05:38:15PM +0100, Jonathan Neuschäfer wrote:
> - Format the pipe diagram as a monospace block.
> - Fix formatting of the list. Without the empty line, the first dash is
>   not parsed as a bullet point.
> 
> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
> ---
> Previous copy: https://lore.kernel.org/lkml/20191002153827.23026-2-j.neuschaefer@gmx.net/
> 
> It seems that this patch got lost, somehow.

Occasionally happens with the committer model we have, especially for
smaller drivers. Thanks for resending, applied to drm-misc-next now.
-Daniel

> ---
>  drivers/gpu/drm/mcde/mcde_drv.c | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mcde/mcde_drv.c b/drivers/gpu/drm/mcde/mcde_drv.c
> index 9a09eba53182..c535abed4765 100644
> --- a/drivers/gpu/drm/mcde/mcde_drv.c
> +++ b/drivers/gpu/drm/mcde/mcde_drv.c
> @@ -20,11 +20,11 @@
>   * input formats including most variants of RGB and YUV.
>   *
>   * The hardware has four display pipes, and the layout is a little
> - * bit like this:
> + * bit like this::
>   *
> - * Memory     -> Overlay -> Channel -> FIFO -> 5 formatters -> DSI/DPI
> - * External      0..5       0..3       A,B,    3 x DSI         bridge
> - * source 0..9                         C0,C1   2 x DPI
> + *   Memory     -> Overlay -> Channel -> FIFO -> 5 formatters -> DSI/DPI
> + *   External      0..5       0..3       A,B,    3 x DSI         bridge
> + *   source 0..9                         C0,C1   2 x DPI
>   *
>   * FIFOs A and B are for LCD and HDMI while FIFO CO/C1 are for
>   * panels with embedded buffer.
> @@ -43,6 +43,7 @@
>   * to change as we exploit more of the hardware capabilities.
>   *
>   * TODO:
> + *
>   * - Enabled damaged rectangles using drm_plane_enable_fb_damage_clips()
>   *   so we can selectively just transmit the damaged area to a
>   *   command-only display.
> --
> 2.20.1
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-14 16:38 [PATCH RESEND] drm/mcde: Fix Sphinx formatting Jonathan Neuschäfer
2020-02-14 18:25 ` Daniel Vetter

dri-devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dri-devel/0 dri-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dri-devel dri-devel/ https://lore.kernel.org/dri-devel \
		dri-devel@lists.freedesktop.org
	public-inbox-index dri-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.dri-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git