Re: [linux-sunxi] [PATCH 2/2] ARM: dts: sun4i: Add support for Topwise A721 tablet

["Ondřej Jirman" <megous@megous.com>]

Hello Pascal,

On Tue, Mar 10, 2020 at 11:27:24AM +0100, Pascal Roeleven wrote:
> The Topwise A721/LY-F1 tablet is a tablet sold around 2012 under
> different brands. The mainboard mentions A721 clearly, so this tablet
> is best known under this name.
> 
> Signed-off-by: Pascal Roeleven <dev@pascalroeleven.nl>
> ---
>  arch/arm/boot/dts/Makefile                   |   3 +-
>  arch/arm/boot/dts/sun4i-a10-topwise-a721.dts | 302 +++++++++++++++++++
>  2 files changed, 304 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/boot/dts/sun4i-a10-topwise-a721.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 78f144e33..6e6141e00 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1040,7 +1040,8 @@ dtb-$(CONFIG_MACH_SUN4I) += \
>  	sun4i-a10-olinuxino-lime.dtb \
>  	sun4i-a10-pcduino.dtb \
>  	sun4i-a10-pcduino2.dtb \
> -	sun4i-a10-pov-protab2-ips9.dtb
> +	sun4i-a10-pov-protab2-ips9.dtb \
> +	sun4i-a10-topwise-a721.dtb
>  dtb-$(CONFIG_MACH_SUN5I) += \
>  	sun5i-a10s-auxtek-t003.dtb \
>  	sun5i-a10s-auxtek-t004.dtb \
> diff --git a/arch/arm/boot/dts/sun4i-a10-topwise-a721.dts b/arch/arm/boot/dts/sun4i-a10-topwise-a721.dts
> new file mode 100644
> index 000000000..ff43c9c12
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun4i-a10-topwise-a721.dts
> @@ -0,0 +1,302 @@
> +/*
> + * Copyright 2020 Pascal Roeleven <dev@pascalroeleven.nl>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */

You should use SPDX license identifier instead of boilerplate license
text.

> +/dts-v1/;
> +#include "sun4i-a10.dtsi"
> +#include "sunxi-common-regulators.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/pwm/pwm.h>
> +
> +/ {
> +	model = "Topwise A721";
> +	compatible = "topwise,a721", "allwinner,sun4i-a10";

topwise is not in vendor-prefixes.yaml

> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm 0 100000 PWM_POLARITY_INVERTED>;
> +		power-supply = <&reg_vbat>;
> +		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
> +		brightness-levels = <0 30 40 50 60 70 80 90 100>;
> +		default-brightness-level = <8>;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	panel: panel {
> +		compatible = "starry,kr070pe2t";
> +		backlight = <&backlight>;
> +		power-supply = <&reg_lcd_power>;
> +
> +		port {
> +			panel_input: endpoint {
> +				remote-endpoint = <&tcon0_out_panel>;
> +			};
> +		};
> +	};
> +
> +	reg_lcd_power: reg-lcd-power {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&lcd_power_pin>;
> +		regulator-name = "reg-lcd-power";
> +		gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
> +		enable-active-high;
> +	};
> +
> +	reg_vbat: reg-vbat {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vbat";
> +		regulator-min-microvolt = <3700000>;
> +		regulator-max-microvolt = <3700000>;
> +	};
> +
> +};
> +
> +&codec {
> +	status = "okay";
> +};
> +
> +&cpu0 {
> +	cpu-supply = <&reg_dcdc2>;
> +};
> +
> +&de {
> +	status = "okay";
> +};
> +
> +&ehci0 {
> +	status = "okay";
> +};
> +
> +&ehci1 {
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	status = "okay";
> +
> +	axp209: pmic@34 {
> +		reg = <0x34>;
> +		interrupts = <0>;
> +	};
> +};
> +
> +#include "axp209.dtsi"
> +
> +&ac_power_supply {
> +	status = "okay";
> +};
> +
> +&battery_power_supply {
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	status = "okay";
> +
> +	mma7660: accelerometer@4c {
> +		compatible = "fsl,mma7660";
> +		reg = <0x4c>;
> +	};
> +};
> +
> +&i2c2 {
> +	status = "okay";
> +
> +	ft5406ee8: touchscreen@38 {
> +		compatible = "edt,edt-ft5406";
> +		reg = <0x38>;
> +		interrupt-parent = <&pio>;
> +		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
> +		touchscreen-size-x = <800>;
> +		touchscreen-size-y = <480>;
> +		vcc-supply = <&reg_vcc3v3>;
> +	};
> +};
> +
> +&lradc {
> +	vref-supply = <&reg_ldo2>;
> +	status = "okay";
> +
> +	button-vol-down {
> +		label = "Volume Down";
> +		linux,code = <KEY_VOLUMEDOWN>;
> +		channel = <0>;
> +		voltage = <761904>;
> +	};
> +
> +	button-vol-up {
> +		label = "Volume Up";
> +		linux,code = <KEY_VOLUMEUP>;
> +		channel = <0>;
> +		voltage = <571428>;
> +	};
> +};
> +
> +&mmc0 {
> +	vmmc-supply = <&reg_vcc3v3>;
> +	bus-width = <4>;
> +	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */
> +	status = "okay";
> +};
> +
> +&ohci0 {
> +	status = "okay";
> +};
> +
> +&ohci1 {
> +	status = "okay";
> +};
> +
> +&otg_sram {
> +	status = "okay";
> +};
> +
> +&pio {
> +	vcc-pb-supply = <&reg_vcc3v3>;
> +	vcc-pf-supply = <&reg_vcc3v3>;
> +	vcc-ph-supply = <&reg_vcc3v3>;
> +
> +	lcd_power_pin: lcd-power-pin {
> +		pins = "PH8";
> +		function = "gpio_out";
> +		bias-pull-up;
> +	};
> +
> +	usb0_id_detect_pin: usb0-id-detect-pin {
> +		pins = "PH4";
> +		function = "gpio_in";
> +		bias-pull-up;
> +	};
> +
> +	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
> +		pins = "PH5";
> +		function = "gpio_in";
> +		bias-pull-down;
> +	};

All 3 nodes above can be replaced with appropriate GPIO_PULL_UP / GPIO_PULL_DOWN
macros inside the *-gpios property.

> +};
> +
> +&pwm {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pwm0_pin>;
> +	status = "okay";
> +};
> +
> +&reg_dcdc2 {
> +	regulator-always-on;
> +	regulator-min-microvolt = <1000000>;
> +	regulator-max-microvolt = <1400000>;
> +	regulator-name = "vdd-cpu";
> +};
> +
> +&reg_dcdc3 {
> +	regulator-always-on;
> +	regulator-min-microvolt = <1250000>;
> +	regulator-max-microvolt = <1250000>;
> +	regulator-name = "vdd-int-dll";
> +};
> +
> +

You have extra space here ^

> +&reg_ldo1 {
> +	regulator-name = "vdd-rtc";
> +};
> +
> +&reg_ldo2 {
> +	regulator-always-on;
> +	regulator-min-microvolt = <3000000>;
> +	regulator-max-microvolt = <3000000>;
> +	regulator-name = "avcc";
> +};
> +
> +&reg_usb0_vbus {
> +	status = "okay";
> +};
> +
> +&reg_usb1_vbus {
> +	status = "okay";
> +};
> +
> +&reg_usb2_vbus {
> +	status = "okay";
> +};
> +
> +&tcon0_out {
> +	tcon0_out_panel: endpoint@0 {
> +		reg = <0>;
> +		remote-endpoint = <&panel_input>;
> +	};
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_pb_pins>;
> +	status = "okay";
> +};
> +
> +&usb_otg {
> +	dr_mode = "otg";
> +	status = "okay";
> +};
> +
> +&usb_power_supply {
> +	status = "okay";
> +};
> +
> +&usbphy {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;

No need to use pinctrl to configure regular GPIO functions anymore.

regards,
	Ondrej

> +	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> +	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
> +	usb0_vbus-supply = <&reg_usb0_vbus>;
> +	usb1_vbus-supply = <&reg_usb1_vbus>;
> +	usb2_vbus-supply = <&reg_usb2_vbus>;
> +	status = "okay";
> +};
> -- 
> 2.20.1
> 
> -- 
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com.
> To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20200310102725.14591-3-dev%40pascalroeleven.nl.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel