From: Phong LE <ple@baylibre.com>
To: narmstrong@baylibre.com, airlied@linux.ie, daniel@ffwll.ch,
robh+dt@kernel.org, mark.rutland@arm.com, a.hajda@samsung.com
Cc: devicetree@vger.kernel.org, jernej.skrabec@siol.net,
dri-devel@lists.freedesktop.org, stephan@gerhold.net,
jonas@kwiboo.se, heiko.stuebner@theobroma-systems.com,
Jonathan.Cameron@huawei.com, linux-kernel@vger.kernel.org,
broonie@kernel.org, Laurent.pinchart@ideasonboard.com,
gregkh@linuxfoundation.org, mchehab+samsung@kernel.org,
andriy.shevchenko@linux.intel.com, sam@ravnborg.org,
davem@davemloft.net, icenowy@aosc.io
Subject: [PATCH v2 2/4] dt-bindings: display: bridge: add it66121 bindings
Date: Wed, 11 Mar 2020 13:51:33 +0100 [thread overview]
Message-ID: <20200311125135.30832-3-ple@baylibre.com> (raw)
In-Reply-To: <20200311125135.30832-1-ple@baylibre.com>
Add the ITE bridge HDMI it66121 bindings.
Signed-off-by: Phong LE <ple@baylibre.com>
---
.../bindings/display/bridge/ite,it66121.yaml | 98 +++++++++++++++++++
1 file changed, 98 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
new file mode 100644
index 000000000000..1717e880d130
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ite,it66121.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ITE it66121 HDMI bridge Device Tree Bindings
+
+maintainers:
+ - Phong LE <ple@baylibre.com>
+ - Neil Armstrong <narmstrong@baylibre.com>
+
+description: |
+ The IT66121 is a high-performance and low-power single channel HDMI
+ transmitter, fully compliant with HDMI 1.3a, HDCP 1.2 and backward compatible
+ to DVI 1.0 specifications.
+
+properties:
+ compatible:
+ const: ite,it66121
+
+ reg:
+ maxItems: 1
+ description: base I2C address of the device
+
+ reset-gpios:
+ maxItems: 1
+ description: GPIO connected to active low reset
+
+ vrf12-supply:
+ maxItems: 1
+ description: Regulator for 1.2V analog core power.
+
+ vcn33-supply:
+ maxItems: 1
+ description: Regulator for 3.3V digital core power.
+
+ vcn18-supply:
+ maxItems: 1
+ description: Regulator for 1.8V IO core power.
+
+ interrupts:
+ maxItems: 1
+
+ pclk-dual-edge:
+ maxItems: 1
+ description: enable pclk dual edge mode.
+
+ port:
+ type: object
+
+ properties:
+ endpoint:
+ type: object
+ description: |
+ Input endpoints of the bridge.
+
+ required:
+ - endpoint
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - vrf12-supply
+ - vcn33-supply
+ - vcn18-supply
+ - interrupts
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ it66121hdmitx: it66121hdmitx@4c {
+ compatible = "ite,it66121";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ite_pins_default>;
+ vcn33-supply = <&mt6358_vcn33_wifi_reg>;
+ vcn18-supply = <&mt6358_vcn18_reg>;
+ vrf12-supply = <&mt6358_vrf12_reg>;
+ reset-gpios = <&pio 160 1 /* GPIO_ACTIVE_LOW */>;
+ interrupt-parent = <&pio>;
+ interrupts = <4 8 /* IRQ_TYPE_LEVEL_LOW */>;
+ reg = <0x4c>;
+ pclk-dual-edge;
+
+ port {
+ it66121_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+ };
--
2.17.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-03-12 8:08 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-11 12:51 [PATCH v2 0/4] Add it66121 driver Phong LE
2020-03-11 12:51 ` [PATCH v2 1/4] dt-bindings: add ITE vendor Phong LE
2020-03-23 22:04 ` Rob Herring
2020-03-11 12:51 ` Phong LE [this message]
2020-03-13 13:40 ` [PATCH v2 2/4] dt-bindings: display: bridge: add it66121 bindings Laurent Pinchart
2020-03-13 14:12 ` Neil Armstrong
2020-03-13 14:17 ` Laurent Pinchart
2020-03-13 15:29 ` Neil Armstrong
2020-03-23 22:09 ` Rob Herring
2020-03-11 12:51 ` [PATCH v2 3/4] drm: bridge: add it66121 driver Phong LE
2020-03-11 13:55 ` Andy Shevchenko
2020-03-12 0:53 ` Laurent Pinchart
2020-03-12 8:40 ` Andy Shevchenko
2020-03-13 13:55 ` Laurent Pinchart
2020-06-11 15:22 ` Drew Fustini
2020-03-11 12:51 ` [PATCH v2 4/4] MAINTAINERS: add it66121 HDMI bridge driver entry Phong LE
2020-03-11 13:22 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200311125135.30832-3-ple@baylibre.com \
--to=ple@baylibre.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=a.hajda@samsung.com \
--cc=airlied@linux.ie \
--cc=andriy.shevchenko@linux.intel.com \
--cc=broonie@kernel.org \
--cc=daniel@ffwll.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=gregkh@linuxfoundation.org \
--cc=heiko.stuebner@theobroma-systems.com \
--cc=icenowy@aosc.io \
--cc=jernej.skrabec@siol.net \
--cc=jonas@kwiboo.se \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mchehab+samsung@kernel.org \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=stephan@gerhold.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).