From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.5 required=3.0 tests=INCLUDES_PATCH, MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,USER_AGENT_SANE_1 autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7DF94C4332B for ; Mon, 23 Mar 2020 20:48:49 +0000 (UTC) Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 5446C20719 for ; Mon, 23 Mar 2020 20:48:49 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 5446C20719 Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=kernel.org Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=dri-devel-bounces@lists.freedesktop.org Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 33D0C89DA6; Mon, 23 Mar 2020 20:48:48 +0000 (UTC) Received: from mail-il1-f196.google.com (mail-il1-f196.google.com [209.85.166.196]) by gabe.freedesktop.org (Postfix) with ESMTPS id 9891689D9B; Mon, 23 Mar 2020 20:48:46 +0000 (UTC) Received: by mail-il1-f196.google.com with SMTP id t11so4847079ils.1; Mon, 23 Mar 2020 13:48:46 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to:user-agent; bh=6PkVAq49hIvuavFHfNDiJOSOnMU3MjR9d7ASmsCbhzQ=; b=E0XnadDwQbj7TBW4GGitsvz1rww+eIjMqGI2l7PXRiEh7IenrHWVuRyT1CG0Wu5O0t SUVl8cBzZB4gv2HPhO82FKotgy7VZrysH7pOd00XB3RtkENz7rC0s/OQpPEOyULmjbjF d078vxZV+drswQTp33p0nmKtBt3Gtv0qIUdris3dbeN7dJC8eJftZFz9AQo5NNqOKaFD X1hS02hfP6/L2A0HDE/kKdISqutFQkmWnd/SjGYSLHAInFM8AC8gLBpPKn0wzAiewHve tcMc0Z32vsoHZzr3EIO5b1q1DZuUH5YwPUuX+MO6Ew8YMdUbg12fZ17HoI0OMtEvrPTD M6vw== X-Gm-Message-State: ANhLgQ3lgvdYzcLeheAT6ZR7fMTu9mdkbbvF1kjEFhn6s0+28A7NLd2l LDBE58bVB8yn0Wd/Mlf/FQ== X-Google-Smtp-Source: ADFU+vv4KJm4/RSnRHOYr8tFLX6jUwTXnvstC5D+5b6Lx8lXyhiH6QJR3USB6zcLPNX8xnedIxKflQ== X-Received: by 2002:a92:c790:: with SMTP id c16mr608975ilk.206.1584996525368; Mon, 23 Mar 2020 13:48:45 -0700 (PDT) Received: from rob-hp-laptop ([64.188.179.250]) by smtp.gmail.com with ESMTPSA id c12sm5583718ila.31.2020.03.23.13.48.42 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 23 Mar 2020 13:48:44 -0700 (PDT) Received: (nullmailer pid 25909 invoked by uid 1000); Mon, 23 Mar 2020 20:48:41 -0000 Date: Mon, 23 Mar 2020 14:48:41 -0600 From: Rob Herring To: Krishna Manikandan Subject: Re: [v2] dt-bindings: msm: disp: add yaml schemas for DPU and DSI bindings Message-ID: <20200323204841.GA9739@bogus> References: <1583749366-23906-1-git-send-email-mkrishn@codeaurora.org> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <1583749366-23906-1-git-send-email-mkrishn@codeaurora.org> User-Agent: Mutt/1.10.1 (2018-07-13) X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, seanpaul@chromium.org, kalyan_t@codeaurora.org, hoegsberg@chromium.org, freedreno@lists.freedesktop.org Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" On Mon, Mar 09, 2020 at 03:52:46PM +0530, Krishna Manikandan wrote: > MSM Mobile Display Subsytem(MDSS) encapsulates sub-blocks > like DPU display controller, DSI etc. Add YAML schema > for the device tree bindings for the same. > > Signed-off-by: Krishna Manikandan > > Changes in v2: > - Changed dpu to DPU (Sam Ravnborg) > - Fixed indentation issues (Sam Ravnborg) > - Added empty line between different properties (Sam Ravnborg) > - Replaced reference txt files with their corresponding > yaml files (Sam Ravnborg) > - Modified the file to use "|" only when it is > necessary (Sam Ravnborg) > --- > .../bindings/display/msm/dpu-sc7180.yaml | 261 +++++++++++++++ > .../bindings/display/msm/dpu-sdm845.yaml | 259 +++++++++++++++ > .../bindings/display/msm/dsi-sc7180.yaml | 362 +++++++++++++++++++++ > .../bindings/display/msm/dsi-sdm845.yaml | 362 +++++++++++++++++++++ > 4 files changed, 1244 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml > create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml > create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-sc7180.yaml > create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-sdm845.yaml > > diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml > new file mode 100644 > index 0000000..2a9efc5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml > @@ -0,0 +1,261 @@ > +# SPDX-License-Identifier: GPL-2.0-only Dual license new bindings: (GPL-2.0-only OR BSD-2-Clause) Though, this isn't new. You need to be removing the old dpu.txt. And relicense only if QCom/CA has ownership of the old file. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/msm/dpu-sc7180.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Description of Qualcomm Display DPU dt properties. > + > +maintainers: > + - Krishna Manikandan > + > +description: | > + Device tree bindings for MSM Mobile Display Subsytem(MDSS) that encapsulates > + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree > + bindings of MDSS and DPU are mentioned for SC7180 target. > + > +properties: > + "mdss": > + type: object > + description: | > + Node containing MDSS that encapsulated sub-blocks like DPU, DSI and DP > + interfaces. > + > + properties: > + compatible: > + items: > + - const: qcom,sc7180-mdss > + > + reg: > + description: Physical base address and length of controller's registers. How many? You need 'maxItems: 1' if 1. Drop the description. That's every 'reg' property. > + > + reg-names: > + description: | > + Names for different register regions defined above. The required region > + is mentioned below. Drop this. > + items: > + - const: mdss > + > + power-domains: > + description: | > + A power domain consumer specifier according to > + Documentation/devicetree/bindings/power/power-domain.yaml. Drop generic descriptions. Needs to define how many? > + > + clocks: > + description: List of clock specifiers for clocks needed by the device. How many? > + > + clock-names: > + description: | > + Device clock names in the same order as mentioned in clocks property. There's no order defined there. > + The required clocks are mentioned below. > + items: > + - const: iface > + - const: bus > + - const: ahb > + - const: core > + > + interrupts: > + description: Interrupt signal from MDSS. How many? > + > + interrupt-controller: > + description: Identifies the node as an interrupt controller. interrupt-controller: true > + > + "#interrupt-cells": > + description: | > + Specifies the number of cells needed to encode an interrupt source. Drop > + const: 1 > + > + iommus: > + description: Phandle of iommu device node. How mang? > + > + "#address-cells": > + description: | > + Indicate how many cells (32 bits values) are needed to form the base > + address part in the reg property. Drop. What's the value? > + > + "#size-cells": > + description: | > + Indicate how many cells (32 bits values) are needed to specify the > + size part in the reg property. > + > + ranges: ranges: true > + description: | > + Parent bus address space is the same as the child bus address space. > + > + interconnects : space ^ > + description: | > + Interconnect path specifier for MDSS according to > + Documentation/devicetree/bindings/interconnect/interconnect.txt. > + Should be 2 paths corresponding to 2 AXI ports. Express as schema constraints. > + > + interconnect-names: > + description: | > + MDSS will have 2 port names to differentiate between the > + 2 interconnect paths defined with interconnect specifier. Need to define the values. > + > + properties: You are defining that this node has a property called 'properties'... > + description: | > + The optional properties for MDSS are mentioned below. > + assigned-clocks: > + description: | > + List of clock specifiers for clocks needing rate assignment. > + > + assigned-clock-rates: > + description: | > + List of clock frequencies sorted in the same order as the > + assigned-clocks property. And this is all just description text (it doesn't do anything). > + > + "mdp": > + type: object > + description: Node containing the properties of DPU. > + > + properties: > + compatible: > + items: > + - const: qcom,sc7180-dpu > + > + reg: > + description: | > + Physical base address and length of controller's registers. Drop. How many? And so on. I'm not going to keep repeating the same issue... > + > + reg-names: > + description: | > + Register region names. The following regions are required. > + items: > + - const: mdp > + - const: vbif > + > + clocks: > + description: | > + List of clock specifiers for clocks needed by the device. > + > + clock-names: > + description: | > + Device clock names, must be in same order as clocks property. > + The following clocks are required. "bus" is an optional property > + in sc7180 due to architecture change. > + items: > + - const: iface > + - const: core > + - const: vsync > + > + interrupts: > + description: Interrupt line from DPU to MDSS. > + > + ports: > + type: object > + description: | > + Contains the list of output ports from DPU device. These ports > + connect to interfaces that are external to the DPU hardware, > + such as DSI, DP etc. Each output port contains an endpoint that > + describes how it is connected to an external interface. These > + are described by the standard properties documented in files > + mentioned below. > + > + Documentation/devicetree/bindings/graph.txt > + Documentation/devicetree/bindings/media/video-interfaces.txt > + > + properties: > + port0: 'port@0'? > + type: object > + description: DPU_INTF1 (DSI1) > + port1: > + type: object > + description: DPU_INTF2 (DSI2) > + > + properties: > + description: | > + The optional properties for DPU are mentioned below. Again, not how optional properties work. > + assigned-clocks: > + description: | > + List of clock specifiers for clocks needing rate assignment. > + > + assigned-clock-rates: > + description: | > + List of clock frequencies sorted in the same order as the > + assigned-clocks property. > + > + clock-names: > + description: | > + Optional device clocks, needed for accessing LUT blocks. > + items: > + - const: rot > + - const: lut You need 'required' and 'additionalProperties' at this level. > + > +required: > + - compatible > + - reg > + - reg-names > + - power-domains > + - clocks > + - clock-names > + - interrupts > + - interrupt-controller > + - iommus > + - ports Add: additionalProperties: false > + > +examples: > + - | > + #include > + #include > + #include > + #include > + mdss: mdss@ae00000 { > + compatible = "qcom,sc7180-mdss"; > + reg = <0xae00000 0x1000>; > + reg-names = "mdss"; > + power-domains = <&clock_dispcc 0>; > + clocks = <&gcc GCC_DISP_AHB_CLK>, > + <&gcc GCC_DISP_HF_AXI_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>; > + clock-names = "iface", "gcc_bus", "core"; > + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; > + assigned-clock-rates = <300000000>; > + > + interrupts = ; > + interrupt-controller; > + #interrupt-cells = <1>; > + > + interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>; > + > + interconnect-names = "mdp0-mem"; > + > + iommus = <&apps_smmu 0x800 0x2>; > + > + #address-cells = <2>; > + #size-cells = <2>; > + > + mdss_mdp: mdp@ae01000 { > + compatible = "qcom,sc7180-dpu"; > + reg = <0 0x0ae01000 0 0x8f000>, > + <0 0x0aeb0000 0 0x2008>, > + <0 0x0af03000 0 0x16>; > + reg-names = "mdp", "vbif", "disp_cc"; > + > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_ROT_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>, > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > + clock-names = "iface", "rot", "lut", "core", > + "vsync"; > + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > + assigned-clock-rates = <300000000>, <19200000>; > + interrupt-parent = <&mdss>; > + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dpu_intf1_out: endpoint { > + remote-endpoint = <&dsi0_in>; > + }; > + }; > + }; > + }; > + }; > +... > diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml > new file mode 100644 > index 0000000..bb975938 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml > @@ -0,0 +1,259 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/msm/dpu-sdm845.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Description of Qualcomm Display DPU dt properties. > + > +maintainers: > + - Krishna Manikandan > + > +description: | > + Device tree bindings for MSM Mobile Display Subsytem(MDSS) that encapsulates > + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree > + bindings of MDSS and DPU are mentioned for SDM845 target. > + > +properties: > + "mdss": > + type: object > + description: | > + Node containing MDSS that encapsulated sub-blocks like DPU, DSI and DP > + interfaces. > + > + properties: > + compatible: > + items: > + - const: qcom,sdm845-mdss > + > + reg: > + description: Physical base address and length of controller's registers. > + > + reg-names: > + description: | > + Names for different register regions defined above. The required region > + is mentioned below. > + items: > + - const: mdss > + > + power-domains: > + description: | > + A power domain consumer specifier according to > + Documentation/devicetree/bindings/power/power-domain.yaml. > + > + clocks: > + description: List of clock specifiers for clocks needed by the device. > + > + clock-names: > + description: | > + Device clock names in the same order as mentioned in clocks property. > + The required clocks are mentioned below. > + items: > + - const: iface > + - const: bus > + - const: core > + > + interrupts: > + description: Interrupt signal from MDSS. > + > + interrupt-controller: > + description: Identifies the node as an interrupt controller. > + > + "#interrupt-cells": > + description: | > + Specifies the number of cells needed to encode an interrupt source. > + const: 1 > + > + iommus: > + description: Phandle of iommu device node. > + > + "#address-cells": > + description: | > + Indicate how many cells (32 bits values) are needed to form the base > + address part in the reg property. > + > + "#size-cells": > + description: | > + Indicate how many cells (32 bits values) are needed to specify the > + size part in the reg property. > + > + ranges: > + description: | > + Parent bus address space is the same as the child bus address space. > + > + interconnects : > + description: | > + Interconnect path specifier for MDSS according to > + Documentation/devicetree/bindings/interconnect/interconnect.txt. > + Should be 2 paths corresponding to 2 AXI ports. > + > + interconnect-names: > + description: | > + MDSS will have 2 port names to differentiate between the > + 2 interconnect paths defined with interconnect specifier. > + > + properties: > + description: | > + The optional properties for MDSS are mentioned below. > + assigned-clocks: > + description: | > + List of clock specifiers for clocks needing rate assignment. > + > + assigned-clock-rates: > + description: | > + List of clock frequencies sorted in the same order as the > + assigned-clocks property. > + > + "mdp": > + type: object > + description: Node containing the properties of DPU. > + > + properties: > + compatible: > + items: > + - const: qcom,sc7180-dpu > + > + reg: > + description: | > + Physical base address and length of controller's registers. > + > + reg-names: > + description: | > + Register region names. The following regions are required. > + items: > + - const: mdp > + - const: vbif > + > + clocks: > + description: | > + List of clock specifiers for clocks needed by the device. > + > + clock-names: > + description: | > + Device clock names, must be in same order as clocks property. > + The following clocks are required. > + items: > + - const: bus > + - const: iface > + - const: core > + - const: vsync > + > + interrupts: > + description: Interrupt line from DPU to MDSS. > + > + ports: > + type: object > + description: | > + Contains the list of output ports from DPU device. These ports > + connect to interfaces that are external to the DPU hardware, > + such as DSI, DP etc. Each output port contains an endpoint that > + describes how it is connected to an external interface. These > + are described by the standard properties documented in files > + mentioned below. > + > + Documentation/devicetree/bindings/graph.txt > + Documentation/devicetree/bindings/media/video-interfaces.txt > + > + properties: > + port0: > + type: object > + description: DPU_INTF1 (DSI1) > + port1: > + type: object > + description: DPU_INTF2 (DSI2) > + > + properties: > + description: | > + The optional properties for DPU are mentioned below. > + assigned-clocks: > + description: | > + List of clock specifiers for clocks needing rate assignment. > + > + assigned-clock-rates: > + description: | > + List of clock frequencies sorted in the same order as the > + assigned-clocks property. > + > + > +required: > + - compatible > + - reg > + - reg-names > + - power-domains > + - clocks > + - clock-names > + - interrupts > + - interrupt-controller > + - iommus > + - ports > + > +examples: > +- | > + #include > + #include > + #include > + mdss: mdss@ae00000 { > + compatible = "qcom,sdm845-mdss"; > + reg = <0 0x0ae00000 0 0x1000>; > + reg-names = "mdss"; > + power-domains = <&dispcc MDSS_GDSC>; > + > + clocks = <&gcc GCC_DISP_AHB_CLK>, > + <&gcc GCC_DISP_AXI_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>; > + clock-names = "iface", "bus", "core"; > + > + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; > + assigned-clock-rates = <300000000>; > + > + interrupts = ; > + interrupt-controller; > + #interrupt-cells = <1>; > + > + iommus = <&apps_smmu 0x880 0x8>, > + <&apps_smmu 0xc80 0x8>; > + > + #address-cells = <2>; > + #size-cells = <2>; > + > + mdss_mdp: mdp@ae01000 { > + compatible = "qcom,sdm845-dpu"; > + reg = <0 0x0ae01000 0 0x8f000>, > + <0 0x0aeb0000 0 0x2008>; > + reg-names = "mdp", "vbif"; > + > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_AXI_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>, > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > + clock-names = "iface", "bus", "core", "vsync"; > + > + assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > + assigned-clock-rates = <300000000>, > + <19200000>; > + > + interrupt-parent = <&mdss>; > + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dpu_intf1_out: endpoint { > + remote-endpoint = <&dsi0_in>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + dpu_intf2_out: endpoint { > + remote-endpoint = <&dsi1_in>; > + }; > + }; > + }; > + }; > + }; > +... > diff --git a/Documentation/devicetree/bindings/display/msm/dsi-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dsi-sc7180.yaml > new file mode 100644 > index 0000000..4727205 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/msm/dsi-sc7180.yaml > @@ -0,0 +1,362 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/msm/dsi-sc7180.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Description of Qualcomm Display DSI interface dt properties. > + > +maintainers: > + - Krishna Manikandan > + > +description: | > + Device tree bindings for DSI controller and DSI PHY for SC7180 target. Split into 2 docs. > + > +properties: > + "dsi-controller": dsi@... However, you should remove this level. And you should reference dsi-controller.yaml. > + type: object > + description: Node containing the properties of DSI controller. > + > + properties: > + compatible: > + items: > + - const: qcom,mdss-dsi-ctrl > + > + reg: > + description: Physical base address and length of registers of controller. Same issues again... > + > + reg-names: > + description: | > + Names for different register regions defined above. The required region > + is mentioned below. > + items: > + - const: dsi_ctrl > + > + clocks: > + description: Phandles to device clocks. > + > + clock-names: > + description: | > + Device clock names in the same order as mentioned in clocks property. > + The required clocks are mentioned below. For DSIv2, we need an > + additional clock "src" and for DSI6G v2.0 onwards we need > + "byte_intf" clock. > + items: > + - const: iface > + - const: bus > + - const: byte > + - const: pixel > + - const: core > + > + assigned-clocks: > + description: Parents of "byte" and "pixel" for the given platform. > + > + assigned-clock-parents: > + description: | > + The Byte clock and Pixel clock PLL outputs provided by a DSI PHY block. > + Details on clock bindings are mentioned in > + Documentation/devicetree/bindings/clock/clock-bindings.txt. > + > + vdd-supply: > + description: Phandle to vdd regulator device node. > + > + vddio-supply: > + description: Phandle to vdd-io regulator device node. > + > + vdda-supply: > + description: Phandle to vdda regulator device node. > + > + phys: > + description: Phandle to DSI PHY device node. > + > + phy-names: > + description: Name of the corresponding PHY device. > + > + syscon-sfpb: > + description: A phandle to mmss_sfpb syscon node (only for DSIv2). > + > + ports: > + description: | > + Contains 2 DSI controller ports as child nodes. Each port contains > + an endpoint subnode as defined in > + Documentation/devicetree/bindings/graph.txt and > + Documentation/devicetree/bindings/media/video-interfaces.txt. > + > + properties: > + description: | > + The optional properties for DSI controller are mentioned below. > + > + panel@0: > + description: | > + Node of panel connected to this DSI controller. > + See files in Documentation/devicetree/bindings/display/panel/ > + for each supported panel. > + > + qcom,dual-dsi-mode: Vendor specific properties need a type reference. > + description: | > + Boolean value indicating if the DSI controller is > + driving a panel which needs 2 DSI links. > + > + qcom,master-dsi: > + description: | > + Boolean value indicating if the DSI controller is driving > + the master link of the 2-DSI panel. > + > + qcom,sync-dual-dsi: > + description: | > + Boolean value indicating if the DSI controller is driving a > + 2-DSI panel whose 2 links need receive command simultaneously. > + > + pinctrl-names: > + description: The pin control state names; should contain "default" sleep? > + > + pinctrl-0: > + description: The default pinctrl state (active) > + > + pinctrl-n: Not a valid property name. > + description: The "sleep" pinctrl state > + > + ports: > + description: | > + Contains DSI controller input and output ports as children, each > + containing one endpoint subnode. > + > + properties: The indentation is wrong so the rest of this doesn't do anything. > + description: DSI Endpoint properties But you're in the 'ports' node... > + > + remote-endpoint: > + description: | > + For port@0, set to phandle of the connected panel/bridge's > + input endpoint. For port@1, set to the MDP interface output. > + See Documentation/devicetree/bindings/graph.txt for > + device graph info. > + > + data-lanes: > + description: | > + This describes how the physical DSI data lanes are mapped > + to the logical lanes on the given platform. The value contained in > + index n describes what physical lane is mapped to the logical lane n > + (DATAn, where n lies between 0 and 3). The clock lane position is fixed > + and can't be changed. Hence, they aren't a part of the DT bindings. See > + Documentation/devicetree/bindings/media/video-interfaces.txt for > + more info on the data-lanes property. > + > + For example: > + > + data-lanes = <3 0 1 2>; > + > + The above mapping describes that the logical data lane DATA0 is mapped > + to the physical data lane DATA3, logical DATA1 to physical DATA0, > + logic DATA2 to phys DATA1 and logic DATA3 to phys DATA2. There are > + only a limited number of physical to logical mappings possible. > + oneOf: > + - const: <0 1 2 3> > + - const: <1 2 3 0> > + - const: <2 3 0 1> > + - const: <3 0 1 2> > + - const: <0 3 2 1> > + - const: <1 0 3 2> > + - const: <2 1 0 3> > + - const: <3 2 1 0> > + > + qcom,mdss-mdp-transfer-time-us: > + description: | > + Specifies the DSI transfer time for command mode > + panels in microseconds. Driver uses this number to adjust > + the clock rate according to the expected transfer time. > + Increasing this value would slow down the mdp processing > + and can result in slower performance. > + Decreasing this value can speed up the mdp processing, > + but this can also impact power consumption. > + As a rule this time should not be higher than the time > + that would be expected with the processing at the > + DSI link rate since anyways this would be the maximum > + transfer time that could be achieved. > + If ping pong split is enabled, this time should not be higher > + than two times the DSI link rate time. > + If the property is not specified, then the default value is > + 14000 us. This is an optional property. > + > + "dsi_phy": While this needs to be removed when you make a DSI phy schema doc, I'll point out that it doesn't even match the example. > + type: object > + description: Node containing the properties of DSI PHY > + > + properties: > + compatible: > + oneOf: > + - const: qcom,dsi-phy-28nm-hpm > + - const: qcom,dsi-phy-28nm-lp > + - const: qcom,dsi-phy-20nm > + - const: qcom,dsi-phy-28nm-8960 > + - const: qcom,dsi-phy-14nm > + - const: qcom,dsi-phy-10nm > + - const: qcom,dsi-phy-10nm-8998 > + > + reg: > + description: | > + Physical base address and length of the registers of PLL, PHY. Some > + revisions require the PHY regulator base address, whereas others > + require the PHY lane base address. See below for each PHY revision. > + > + reg-names: > + description: Name of register regions. > + oneOf: > + - description: | > + Following regions are required for DSI 28nm HPM/LP/8960 PHYs and > + 20nm PHY. > + items: > + - const: dsi_pll > + - const: dsi_phy > + - const: dsi_phy_regulator > + > + - description: | > + Following regions are required for DSI 14nm and 10nm PHYs: > + items: > + - const: dsi_pll > + - const: dsi_phy > + - const: dsi_phy_lane > + > + clock-cells: > + description: | > + The DSI PHY block acts as a clock provider, creating > + 2 clocks: A byte clock (index 0), and a pixel clock (index 1). > + const: 1 > + > + power-domains: > + description: Should be <&mmcc MDSS_GDSC>. > + > + clocks: > + description: | > + Phandles to device clocks. See > + Documentation/devicetree/bindings/clock/clock-bindings.txt > + for details on clock bindings. > + > + clock-names: > + description: | > + The following clocks are required. > + "iface" > + "ref" (only required for new DTS files/entries) > + > + vddio-supply: > + description: | > + Phandle to vdd-io regulator device node. Required for 28nm HPM/LP, > + 28nm 8960 PHYs and 20nm PHY. > + > + vcca-supply: > + description: | > + Phandle to vcca regulator device node. Required for 20nm PHY and > + 10nm PHY. > + > + vdds-supply: > + description: | > + Phandle to vdds regulator device node. Required for 10nm PHY. > + > + properties: > + description: | > + The optional properties for DSI PHY are mentioned below. > + > + qcom,dsi-phy-regulator-ldo-mode: > + description: | > + Boolean value indicating if the LDO mode PHY regulator is wanted. > + > +examples: > + - | > + #include > + #include > + #include > + > + dsi0: dsi@fd922800 { > + compatible = "qcom,mdss-dsi-ctrl"; > + qcom,dsi-host-index = <0>; > + interrupt-parent = <&mdp>; > + interrupts = <4 0>; > + reg-names = "dsi_ctrl"; > + reg = <0xfd922800 0x200>; > + power-domains = <&mmcc MDSS_GDSC>; > + > + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, > + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, > + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, > + <&dispcc DISP_CC_MDSS_ESC0_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&gcc GCC_DISP_HF_AXI_CLK>; > + clock-names = "byte", > + "byte_intf", > + "pixel", > + "core", > + "iface", > + "bus"; > + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, > + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; > + assigned-clock-parents = <&dsi_phy0 0>, > + <&dsi_phy0 1>; > + > + vdda-supply = <&pma8084_l2>; > + vdd-supply = <&pma8084_l22>; > + vddio-supply = <&pma8084_l12>; > + > + phys = <&dsi_phy0>; > + phy-names ="dsi-phy"; > + > + qcom,dual-dsi-mode; > + qcom,master-dsi; > + qcom,sync-dual-dsi; > + > + qcom,mdss-mdp-transfer-time-us = <12000>; > + > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&dsi_active>; > + pinctrl-1 = <&dsi_suspend>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dsi0_in: endpoint { > + remote-endpoint = <&mdp_intf1_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + dsi0_out: endpoint { > + remote-endpoint = <&panel_in>; > + data-lanes = <0 1 2 3>; > + }; > + }; > + }; > + > + panel: panel@0 { > + compatible = "sharp,lq101r1sx01"; > + link2 = <&secondary>; > + > + port { > + panel_in: endpoint { > + remote-endpoint = <&dsi0_out>; > + }; > + }; > + }; > + }; > + > + dsi_phy0: dsi-phy@fd922a00 { > + compatible = "qcom,dsi-phy-28nm-hpm"; > + qcom,dsi-phy-index = <0>; > + reg-names = > + "dsi_pll", > + "dsi_phy", > + "dsi_phy_regulator"; > + reg = <0xfd922a00 0xd4>, > + <0xfd922b00 0x2b0>, > + <0xfd922d80 0x7b>; > + clock-names = "iface"; > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>; > + #clock-cells = <1>; > + #phy-cells = <0>; > + vddio-supply = <&pma8084_l12>; > + > + qcom,dsi-phy-regulator-ldo-mode; > + }; > +... > + > diff --git a/Documentation/devicetree/bindings/display/msm/dsi-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dsi-sdm845.yaml > new file mode 100644 > index 0000000..e494a7f > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/msm/dsi-sdm845.yaml > @@ -0,0 +1,362 @@ > +# SPDX-License-Identifier: GPL-2.0-only > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/msm/dsi-sdm845.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Description of Qualcomm Display DSI interface dt properties. > + > +maintainers: > + - Krishna Manikandan > + > +description: | > + Device tree bindings for DSI controller and DSI PHY for SDM845 target. > + > +properties: > + "dsi-controller": > + type: object > + description: Node containing the properties of DSI controller. > + > + properties: > + compatible: > + items: > + - const: qcom,mdss-dsi-ctrl > + > + reg: > + description: Physical base address and length of registers of controller. > + > + reg-names: > + description: | > + Names for different register regions defined above. The required region > + is mentioned below. > + items: > + - const: dsi_ctrl > + > + clocks: > + description: Phandles to device clocks. > + > + clock-names: > + description: | > + Device clock names in the same order as mentioned in clocks property. > + The required clocks are mentioned below. For DSIv2, we need an > + additional clock "src" and for DSI6G v2.0 onwards we need > + "byte_intf" clock. > + items: > + - const: iface > + - const: bus > + - const: byte > + - const: pixel > + - const: core > + > + assigned-clocks: > + description: Parents of "byte" and "pixel" for the given platform. > + > + assigned-clock-parents: > + description: | > + The Byte clock and Pixel clock PLL outputs provided by a DSI PHY block. > + Details on clock bindings are mentioned in > + Documentation/devicetree/bindings/clock/clock-bindings.txt. > + > + vdd-supply: > + description: Phandle to vdd regulator device node. > + > + vddio-supply: > + description: Phandle to vdd-io regulator device node. > + > + vdda-supply: > + description: Phandle to vdda regulator device node. > + > + phys: > + description: Phandle to DSI PHY device node. > + > + phy-names: > + description: Name of the corresponding PHY device. > + > + syscon-sfpb: > + description: A phandle to mmss_sfpb syscon node (only for DSIv2). > + > + ports: > + description: | > + Contains 2 DSI controller ports as child nodes. Each port contains > + an endpoint subnode as defined in > + Documentation/devicetree/bindings/graph.txt and > + Documentation/devicetree/bindings/media/video-interfaces.txt. > + > + properties: > + description: | > + The optional properties for DSI controller are mentioned below. > + > + panel@0: > + description: | > + Node of panel connected to this DSI controller. > + See files in Documentation/devicetree/bindings/display/panel/ > + for each supported panel. > + > + qcom,dual-dsi-mode: > + description: | > + Boolean value indicating if the DSI controller is > + driving a panel which needs 2 DSI links. > + > + qcom,master-dsi: > + description: | > + Boolean value indicating if the DSI controller is driving > + the master link of the 2-DSI panel. > + > + qcom,sync-dual-dsi: > + description: | > + Boolean value indicating if the DSI controller is driving a > + 2-DSI panel whose 2 links need receive command simultaneously. > + > + pinctrl-names: > + description: The pin control state names; should contain "default" > + > + pinctrl-0: > + description: The default pinctrl state (active) > + > + pinctrl-n: > + description: The "sleep" pinctrl state > + > + ports: > + description: | > + Contains DSI controller input and output ports as children, each > + containing one endpoint subnode. > + > + properties: > + description: DSI Endpoint properties > + > + remote-endpoint: > + description: | > + For port@0, set to phandle of the connected panel/bridge's > + input endpoint. For port@1, set to the MDP interface output. > + See Documentation/devicetree/bindings/graph.txt for > + device graph info. > + > + data-lanes: > + description: | > + This describes how the physical DSI data lanes are mapped > + to the logical lanes on the given platform. The value contained in > + index n describes what physical lane is mapped to the logical lane n > + (DATAn, where n lies between 0 and 3). The clock lane position is fixed > + and can't be changed. Hence, they aren't a part of the DT bindings. See > + Documentation/devicetree/bindings/media/video-interfaces.txt for > + more info on the data-lanes property. > + > + For example: > + > + data-lanes = <3 0 1 2>; > + > + The above mapping describes that the logical data lane DATA0 is mapped > + to the physical data lane DATA3, logical DATA1 to physical DATA0, > + logic DATA2 to phys DATA1 and logic DATA3 to phys DATA2. There are > + only a limited number of physical to logical mappings possible. > + oneOf: > + - const: <0 1 2 3> > + - const: <1 2 3 0> > + - const: <2 3 0 1> > + - const: <3 0 1 2> > + - const: <0 3 2 1> > + - const: <1 0 3 2> > + - const: <2 1 0 3> > + - const: <3 2 1 0> > + > + qcom,mdss-mdp-transfer-time-us: > + description: | > + Specifies the DSI transfer time for command mode > + panels in microseconds. Driver uses this number to adjust > + the clock rate according to the expected transfer time. > + Increasing this value would slow down the mdp processing > + and can result in slower performance. > + Decreasing this value can speed up the mdp processing, > + but this can also impact power consumption. > + As a rule this time should not be higher than the time > + that would be expected with the processing at the > + DSI link rate since anyways this would be the maximum > + transfer time that could be achieved. > + If ping pong split is enabled, this time should not be higher > + than two times the DSI link rate time. > + If the property is not specified, then the default value is > + 14000 us. This is an optional property. > + > + "dsi_phy": > + type: object > + description: Node containing the properties of DSI PHY > + > + properties: > + compatible: > + oneOf: > + - const: qcom,dsi-phy-28nm-hpm > + - const: qcom,dsi-phy-28nm-lp > + - const: qcom,dsi-phy-20nm > + - const: qcom,dsi-phy-28nm-8960 > + - const: qcom,dsi-phy-14nm > + - const: qcom,dsi-phy-10nm > + - const: qcom,dsi-phy-10nm-8998 > + > + reg: > + description: | > + Physical base address and length of the registers of PLL, PHY. Some > + revisions require the PHY regulator base address, whereas others > + require the PHY lane base address. See below for each PHY revision. > + > + reg-names: > + description: Name of register regions. > + oneOf: > + - description: | > + Following regions are required for DSI 28nm HPM/LP/8960 PHYs and > + 20nm PHY. > + items: > + - const: dsi_pll > + - const: dsi_phy > + - const: dsi_phy_regulator > + > + - description: | > + Following regions are required for DSI 14nm and 10nm PHYs: > + items: > + - const: dsi_pll > + - const: dsi_phy > + - const: dsi_phy_lane > + > + clock-cells: > + description: | > + The DSI PHY block acts as a clock provider, creating > + 2 clocks: A byte clock (index 0), and a pixel clock (index 1). > + const: 1 > + > + power-domains: > + description: Should be <&mmcc MDSS_GDSC>. > + > + clocks: > + description: | > + Phandles to device clocks. See > + Documentation/devicetree/bindings/clock/clock-bindings.txt > + for details on clock bindings. > + > + clock-names: > + description: | > + The following clocks are required. > + "iface" > + "ref" (only required for new DTS files/entries) > + > + vddio-supply: > + description: | > + Phandle to vdd-io regulator device node. Required for 28nm HPM/LP, > + 28nm 8960 PHYs and 20nm PHY. > + > + vcca-supply: > + description: | > + Phandle to vcca regulator device node. Required for 20nm PHY and > + 10nm PHY. > + > + vdds-supply: > + description: | > + Phandle to vdds regulator device node. Required for 10nm PHY. > + > + properties: > + description: | > + The optional properties for DSI PHY are mentioned below. > + > + qcom,dsi-phy-regulator-ldo-mode: > + description: | > + Boolean value indicating if the LDO mode PHY regulator is wanted. > + > +examples: > + - | > + #include > + #include > + #include > + > + dsi0: dsi@fd922800 { > + compatible = "qcom,mdss-dsi-ctrl"; > + qcom,dsi-host-index = <0>; > + interrupt-parent = <&mdp>; > + interrupts = <4 0>; > + reg-names = "dsi_ctrl"; > + reg = <0xfd922800 0x200>; > + power-domains = <&mmcc MDSS_GDSC>; > + > + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, > + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, > + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, > + <&dispcc DISP_CC_MDSS_ESC0_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_AXI_CLK>; > + clock-names = "byte", > + "byte_intf", > + "pixel", > + "core", > + "iface", > + "bus"; > + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, > + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; > + assigned-clock-parents = <&dsi_phy0 0>, > + <&dsi_phy0 1>; > + > + vdda-supply = <&pma8084_l2>; > + vdd-supply = <&pma8084_l22>; > + vddio-supply = <&pma8084_l12>; > + > + phys = <&dsi_phy0>; > + phy-names ="dsi-phy"; > + > + qcom,dual-dsi-mode; > + qcom,master-dsi; > + qcom,sync-dual-dsi; > + > + qcom,mdss-mdp-transfer-time-us = <12000>; > + > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&dsi_active>; > + pinctrl-1 = <&dsi_suspend>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dsi0_in: endpoint { > + remote-endpoint = <&mdp_intf1_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + dsi0_out: endpoint { > + remote-endpoint = <&panel_in>; > + data-lanes = <0 1 2 3>; > + }; > + }; > + }; > + > + panel: panel@0 { > + compatible = "sharp,lq101r1sx01"; > + link2 = <&secondary>; > + > + port { > + panel_in: endpoint { > + remote-endpoint = <&dsi0_out>; > + }; > + }; > + }; > + }; > + > + dsi_phy0: dsi-phy@fd922a00 { > + compatible = "qcom,dsi-phy-28nm-hpm"; > + qcom,dsi-phy-index = <0>; > + reg-names = > + "dsi_pll", > + "dsi_phy", > + "dsi_phy_regulator"; > + reg = <0xfd922a00 0xd4>, > + <0xfd922b00 0x2b0>, > + <0xfd922d80 0x7b>; > + clock-names = "iface"; > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>; > + #clock-cells = <1>; > + #phy-cells = <0>; > + vddio-supply = <&pma8084_l12>; > + > + qcom,dsi-phy-regulator-ldo-mode; > + }; > +... > + > -- > 1.9.1 > _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel