dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Jordan Crouse <jcrouse@codeaurora.org>
To: iommu@lists.linux-foundation.org
Cc: Sean Paul <sean@poorly.run>,
	freedreno@lists.freedesktop.org, will@kernel.org,
	David Airlie <airlied@linux.ie>,
	linux-arm-msm@vger.kernel.org,
	Sharat Masetty <smasetty@codeaurora.org>,
	Akhil P Oommen <akhilpo@codeaurora.org>,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	robin.murphy@arm.com, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 5/5] drm/msm/a6xx: Support split pagetables
Date: Thu,  9 Apr 2020 17:33:50 -0600	[thread overview]
Message-ID: <20200409233350.6343-6-jcrouse@codeaurora.org> (raw)
In-Reply-To: <20200409233350.6343-1-jcrouse@codeaurora.org>

Attempt to enable split pagetables if the arm-smmu driver supports it.
This will move the default address space from the default region to
the address range assigned to TTBR1. The behavior should be transparent
to the driver for now but it gets the default buffers out of the way
when we want to start swapping TTBR0 for context-specific pagetables.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
---

 drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 52 ++++++++++++++++++++++++++-
 1 file changed, 51 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
index 02ade43d6335..b27daa77723c 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
@@ -825,6 +825,56 @@ static unsigned long a6xx_gpu_busy(struct msm_gpu *gpu)
 	return (unsigned long)busy_time;
 }
 
+static struct msm_gem_address_space *
+a6xx_create_address_space(struct msm_gpu *gpu, struct platform_device *pdev)
+{
+	struct iommu_domain *iommu = iommu_domain_alloc(&platform_bus_type);
+	struct msm_gem_address_space *aspace;
+	struct msm_mmu *mmu;
+	u64 start, size;
+	u32 val = 1;
+	int ret;
+
+	if (!iommu)
+		return ERR_PTR(-ENOMEM);
+
+	/*
+	 * Try to request split pagetables - the request has to be made before
+	 * the domian is attached
+	 */
+	iommu_domain_set_attr(iommu, DOMAIN_ATTR_SPLIT_TABLES, &val);
+
+	mmu = msm_iommu_new(&pdev->dev, iommu);
+	if (IS_ERR(mmu)) {
+		iommu_domain_free(iommu);
+		return ERR_CAST(mmu);
+	}
+
+	/*
+	 * After the domain is attached, see if the split tables were actually
+	 * successful.
+	 */
+	ret = iommu_domain_get_attr(iommu, DOMAIN_ATTR_SPLIT_TABLES, &val);
+	if (!ret && val) {
+		/*
+		 * The aperture start will be at the beginning of the TTBR1
+		 * space so use that as a base
+		 */
+		start = iommu->geometry.aperture_start;
+		size = 0xffffffff;
+	} else {
+		/* Otherwise use the legacy 32 bit region */
+		start = SZ_16M;
+		size = 0xffffffff - SZ_16M;
+	}
+
+	aspace = msm_gem_address_space_create(mmu, "gpu", start, size);
+	if (IS_ERR(aspace))
+		iommu_domain_free(iommu);
+
+	return aspace;
+}
+
 static const struct adreno_gpu_funcs funcs = {
 	.base = {
 		.get_param = adreno_get_param,
@@ -847,7 +897,7 @@ static const struct adreno_gpu_funcs funcs = {
 		.gpu_state_get = a6xx_gpu_state_get,
 		.gpu_state_put = a6xx_gpu_state_put,
 #endif
-		.create_address_space = adreno_iommu_create_address_space,
+		.create_address_space = a6xx_create_address_space,
 	},
 	.get_timestamp = a6xx_get_timestamp,
 };
-- 
2.17.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

      parent reply	other threads:[~2020-04-09 23:34 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-09 23:33 [PATCH v6 0/5] iommu/arm-smmu: Split pagetable support for arm-smmu-v2 Jordan Crouse
2020-04-09 23:33 ` [PATCH v6 3/5] drm/msm: Attach the IOMMU device during initialization Jordan Crouse
2020-04-09 23:33 ` [PATCH v6 4/5] drm/msm: Refactor address space initialization Jordan Crouse
2020-06-17 20:16   ` Eric Anholt
2020-06-17 20:37     ` Eric Anholt
2020-04-09 23:33 ` Jordan Crouse [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200409233350.6343-6-jcrouse@codeaurora.org \
    --to=jcrouse@codeaurora.org \
    --cc=airlied@linux.ie \
    --cc=akhilpo@codeaurora.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=sean@poorly.run \
    --cc=smasetty@codeaurora.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).