dri-devel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 1/3] drm/etnaviv: Fix error path on failure to enable bus clk
       [not found] ` <20200513150007.1315395-1-lkundrak@v3.sk>
@ 2020-05-13 15:00   ` Lubomir Rintel
  2020-05-13 15:00   ` [PATCH 2/3] drm/etnaviv: Don't ignore errors on getting clocks Lubomir Rintel
  2020-05-13 15:00   ` [PATCH 3/3] drm/etnaviv: Simplify clock enable/disable Lubomir Rintel
  2 siblings, 0 replies; 14+ messages in thread
From: Lubomir Rintel @ 2020-05-13 15:00 UTC (permalink / raw)
  To: Lucas Stach
  Cc: linux-kernel, dri-devel, etnaviv, Lubomir Rintel, Russell King

Since commit 65f037e8e908 ("drm/etnaviv: add support for slave interface
clock") the reg clock is enabled before the bus clock and we need to undo
its enablement on error.

Fixes: 65f037e8e908 ("drm/etnaviv: add support for slave interface clock")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
index a31eeff2b297..c6dacfe3d321 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
@@ -1496,7 +1496,7 @@ static int etnaviv_gpu_clk_enable(struct etnaviv_gpu *gpu)
 	if (gpu->clk_bus) {
 		ret = clk_prepare_enable(gpu->clk_bus);
 		if (ret)
-			return ret;
+			goto disable_clk_reg;
 	}
 
 	if (gpu->clk_core) {
@@ -1519,6 +1519,9 @@ static int etnaviv_gpu_clk_enable(struct etnaviv_gpu *gpu)
 disable_clk_bus:
 	if (gpu->clk_bus)
 		clk_disable_unprepare(gpu->clk_bus);
+disable_clk_reg:
+	if (gpu->clk_reg)
+		clk_disable_unprepare(gpu->clk_reg);
 
 	return ret;
 }
-- 
2.26.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH 2/3] drm/etnaviv: Don't ignore errors on getting clocks
       [not found] ` <20200513150007.1315395-1-lkundrak@v3.sk>
  2020-05-13 15:00   ` [PATCH 1/3] drm/etnaviv: Fix error path on failure to enable bus clk Lubomir Rintel
@ 2020-05-13 15:00   ` Lubomir Rintel
  2020-05-13 16:07     ` Fabio Estevam
  2020-05-13 17:09     ` Fabio Estevam
  2020-05-13 15:00   ` [PATCH 3/3] drm/etnaviv: Simplify clock enable/disable Lubomir Rintel
  2 siblings, 2 replies; 14+ messages in thread
From: Lubomir Rintel @ 2020-05-13 15:00 UTC (permalink / raw)
  To: Lucas Stach
  Cc: linux-kernel, dri-devel, etnaviv, Lubomir Rintel, Russell King

There might be good reasons why the getting a clock failed. To treat the
clocks as optional we're specifically only interested in ignoring -ENOENT,
and devm_clk_get_optional() does just that.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
index c6dacfe3d321..e7dbb924f576 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
@@ -1786,26 +1786,26 @@ static int etnaviv_gpu_platform_probe(struct platform_device *pdev)
 	}
 
 	/* Get Clocks: */
-	gpu->clk_reg = devm_clk_get(&pdev->dev, "reg");
+	gpu->clk_reg = devm_clk_get_optional(&pdev->dev, "reg");
 	DBG("clk_reg: %p", gpu->clk_reg);
 	if (IS_ERR(gpu->clk_reg))
-		gpu->clk_reg = NULL;
+		return err;
 
-	gpu->clk_bus = devm_clk_get(&pdev->dev, "bus");
+	gpu->clk_bus = devm_clk_get_optional(&pdev->dev, "bus");
 	DBG("clk_bus: %p", gpu->clk_bus);
 	if (IS_ERR(gpu->clk_bus))
-		gpu->clk_bus = NULL;
+		return err;
 
-	gpu->clk_core = devm_clk_get(&pdev->dev, "core");
+	gpu->clk_core = devm_clk_get_optional(&pdev->dev, "core");
 	DBG("clk_core: %p", gpu->clk_core);
 	if (IS_ERR(gpu->clk_core))
-		gpu->clk_core = NULL;
+		return err;
 	gpu->base_rate_core = clk_get_rate(gpu->clk_core);
 
-	gpu->clk_shader = devm_clk_get(&pdev->dev, "shader");
+	gpu->clk_shader = devm_clk_get_optional(&pdev->dev, "shader");
 	DBG("clk_shader: %p", gpu->clk_shader);
 	if (IS_ERR(gpu->clk_shader))
-		gpu->clk_shader = NULL;
+		return err;
 	gpu->base_rate_shader = clk_get_rate(gpu->clk_shader);
 
 	/* TODO: figure out max mapped size */
-- 
2.26.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* [PATCH 3/3] drm/etnaviv: Simplify clock enable/disable
       [not found] ` <20200513150007.1315395-1-lkundrak@v3.sk>
  2020-05-13 15:00   ` [PATCH 1/3] drm/etnaviv: Fix error path on failure to enable bus clk Lubomir Rintel
  2020-05-13 15:00   ` [PATCH 2/3] drm/etnaviv: Don't ignore errors on getting clocks Lubomir Rintel
@ 2020-05-13 15:00   ` Lubomir Rintel
  2 siblings, 0 replies; 14+ messages in thread
From: Lubomir Rintel @ 2020-05-13 15:00 UTC (permalink / raw)
  To: Lucas Stach
  Cc: linux-kernel, dri-devel, etnaviv, Lubomir Rintel, Russell King

All the NULL checks are pointless, clk_*() routines already deal with NULL
just fine.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 53 ++++++++++-----------------
 1 file changed, 19 insertions(+), 34 deletions(-)

diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
index e7dbb924f576..f5b95cb4f058 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
@@ -1487,55 +1487,40 @@ static int etnaviv_gpu_clk_enable(struct etnaviv_gpu *gpu)
 {
 	int ret;
 
-	if (gpu->clk_reg) {
-		ret = clk_prepare_enable(gpu->clk_reg);
-		if (ret)
-			return ret;
-	}
+	ret = clk_prepare_enable(gpu->clk_reg);
+	if (ret)
+		return ret;
 
-	if (gpu->clk_bus) {
-		ret = clk_prepare_enable(gpu->clk_bus);
-		if (ret)
-			goto disable_clk_reg;
-	}
+	ret = clk_prepare_enable(gpu->clk_bus);
+	if (ret)
+		goto disable_clk_reg;
 
-	if (gpu->clk_core) {
-		ret = clk_prepare_enable(gpu->clk_core);
-		if (ret)
-			goto disable_clk_bus;
-	}
+	ret = clk_prepare_enable(gpu->clk_core);
+	if (ret)
+		goto disable_clk_bus;
 
-	if (gpu->clk_shader) {
-		ret = clk_prepare_enable(gpu->clk_shader);
-		if (ret)
-			goto disable_clk_core;
-	}
+	ret = clk_prepare_enable(gpu->clk_shader);
+	if (ret)
+		goto disable_clk_core;
 
 	return 0;
 
 disable_clk_core:
-	if (gpu->clk_core)
-		clk_disable_unprepare(gpu->clk_core);
+	clk_disable_unprepare(gpu->clk_core);
 disable_clk_bus:
-	if (gpu->clk_bus)
-		clk_disable_unprepare(gpu->clk_bus);
+	clk_disable_unprepare(gpu->clk_bus);
 disable_clk_reg:
-	if (gpu->clk_reg)
-		clk_disable_unprepare(gpu->clk_reg);
+	clk_disable_unprepare(gpu->clk_reg);
 
 	return ret;
 }
 
 static int etnaviv_gpu_clk_disable(struct etnaviv_gpu *gpu)
 {
-	if (gpu->clk_shader)
-		clk_disable_unprepare(gpu->clk_shader);
-	if (gpu->clk_core)
-		clk_disable_unprepare(gpu->clk_core);
-	if (gpu->clk_bus)
-		clk_disable_unprepare(gpu->clk_bus);
-	if (gpu->clk_reg)
-		clk_disable_unprepare(gpu->clk_reg);
+	clk_disable_unprepare(gpu->clk_shader);
+	clk_disable_unprepare(gpu->clk_core);
+	clk_disable_unprepare(gpu->clk_bus);
+	clk_disable_unprepare(gpu->clk_reg);
 
 	return 0;
 }
-- 
2.26.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 2/3] drm/etnaviv: Don't ignore errors on getting clocks
  2020-05-13 15:00   ` [PATCH 2/3] drm/etnaviv: Don't ignore errors on getting clocks Lubomir Rintel
@ 2020-05-13 16:07     ` Fabio Estevam
  2020-05-13 17:09     ` Fabio Estevam
  1 sibling, 0 replies; 14+ messages in thread
From: Fabio Estevam @ 2020-05-13 16:07 UTC (permalink / raw)
  To: Lubomir Rintel
  Cc: The etnaviv authors, DRI mailing list, linux-kernel, Russell King

Hi Lubomir,

On Wed, May 13, 2020 at 12:08 PM Lubomir Rintel <lkundrak@v3.sk> wrote:

>         /* Get Clocks: */
> -       gpu->clk_reg = devm_clk_get(&pdev->dev, "reg");
> +       gpu->clk_reg = devm_clk_get_optional(&pdev->dev, "reg");
>         DBG("clk_reg: %p", gpu->clk_reg);
>         if (IS_ERR(gpu->clk_reg))
> -               gpu->clk_reg = NULL;
> +               return err;

You should return PTR_ERR(gpu->clk_reg) instead.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 2/3] drm/etnaviv: Don't ignore errors on getting clocks
  2020-05-13 15:00   ` [PATCH 2/3] drm/etnaviv: Don't ignore errors on getting clocks Lubomir Rintel
  2020-05-13 16:07     ` Fabio Estevam
@ 2020-05-13 17:09     ` Fabio Estevam
  2020-05-14  2:41       ` Fabio Estevam
  1 sibling, 1 reply; 14+ messages in thread
From: Fabio Estevam @ 2020-05-13 17:09 UTC (permalink / raw)
  To: Lubomir Rintel
  Cc: The etnaviv authors, DRI mailing list, linux-kernel, Russell King

On Wed, May 13, 2020 at 12:08 PM Lubomir Rintel <lkundrak@v3.sk> wrote:
>
> There might be good reasons why the getting a clock failed. To treat the
> clocks as optional we're specifically only interested in ignoring -ENOENT,
> and devm_clk_get_optional() does just that.
>
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> ---
>  drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
> index c6dacfe3d321..e7dbb924f576 100644
> --- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
> +++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
> @@ -1786,26 +1786,26 @@ static int etnaviv_gpu_platform_probe(struct platform_device *pdev)
>         }
>
>         /* Get Clocks: */
> -       gpu->clk_reg = devm_clk_get(&pdev->dev, "reg");
> +       gpu->clk_reg = devm_clk_get_optional(&pdev->dev, "reg");
>         DBG("clk_reg: %p", gpu->clk_reg);
>         if (IS_ERR(gpu->clk_reg))
> -               gpu->clk_reg = NULL;
> +               return err;
>
> -       gpu->clk_bus = devm_clk_get(&pdev->dev, "bus");
> +       gpu->clk_bus = devm_clk_get_optional(&pdev->dev, "bus");

The binding doc Documentation/devicetree/bindings/gpu/vivante,gc.yaml
says that only the 'reg' clock could be optional, the others are
required.


>         DBG("clk_bus: %p", gpu->clk_bus);
>         if (IS_ERR(gpu->clk_bus))
> -               gpu->clk_bus = NULL;
> +               return err;
>
> -       gpu->clk_core = devm_clk_get(&pdev->dev, "core");
> +       gpu->clk_core = devm_clk_get_optional(&pdev->dev, "core");
>         DBG("clk_core: %p", gpu->clk_core);
>         if (IS_ERR(gpu->clk_core))
> -               gpu->clk_core = NULL;
> +               return err;
>         gpu->base_rate_core = clk_get_rate(gpu->clk_core);
>
> -       gpu->clk_shader = devm_clk_get(&pdev->dev, "shader");
> +       gpu->clk_shader = devm_clk_get_optional(&pdev->dev, "shader");
>         DBG("clk_shader: %p", gpu->clk_shader);
>         if (IS_ERR(gpu->clk_shader))
> -               gpu->clk_shader = NULL;
> +               return err;
>         gpu->base_rate_shader = clk_get_rate(gpu->clk_shader);
>
>         /* TODO: figure out max mapped size */
> --
> 2.26.2
>
> _______________________________________________
> etnaviv mailing list
> etnaviv@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/etnaviv
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 2/3] drm/etnaviv: Don't ignore errors on getting clocks
  2020-05-13 17:09     ` Fabio Estevam
@ 2020-05-14  2:41       ` Fabio Estevam
  2020-05-14  8:18         ` Lucas Stach
  0 siblings, 1 reply; 14+ messages in thread
From: Fabio Estevam @ 2020-05-14  2:41 UTC (permalink / raw)
  To: Lubomir Rintel
  Cc: The etnaviv authors, DRI mailing list, linux-kernel, Russell King

On Wed, May 13, 2020 at 2:09 PM Fabio Estevam <festevam@gmail.com> wrote:

> The binding doc Documentation/devicetree/bindings/gpu/vivante,gc.yaml
> says that only the 'reg' clock could be optional, the others are
> required.

arch/arm/boot/dts/dove.dtsi only uses the 'core' clock.
arch/arm/boot/dts/stm32mp157.dtsi uses 'bus' and 'core'

Maybe the binding needs to be updated and it seems that using
devm_clk_get_optional() like you propose is safe.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 2/3] drm/etnaviv: Don't ignore errors on getting clocks
  2020-05-14  2:41       ` Fabio Estevam
@ 2020-05-14  8:18         ` Lucas Stach
  2020-05-14  8:27           ` Russell King - ARM Linux admin
  0 siblings, 1 reply; 14+ messages in thread
From: Lucas Stach @ 2020-05-14  8:18 UTC (permalink / raw)
  To: Fabio Estevam, Lubomir Rintel
  Cc: Russell King, linux-kernel, DRI mailing list, The etnaviv authors

Am Mittwoch, den 13.05.2020, 23:41 -0300 schrieb Fabio Estevam:
> On Wed, May 13, 2020 at 2:09 PM Fabio Estevam <festevam@gmail.com> wrote:
> 
> > The binding doc Documentation/devicetree/bindings/gpu/vivante,gc.yaml
> > says that only the 'reg' clock could be optional, the others are
> > required.
> 
> arch/arm/boot/dts/dove.dtsi only uses the 'core' clock.
> arch/arm/boot/dts/stm32mp157.dtsi uses 'bus' and 'core'
> 
> Maybe the binding needs to be updated and it seems that using
> devm_clk_get_optional() like you propose is safe.

The binding is correct as-is. We want to require those clocks to be
present, but the dove DT was added before the binding was finalized, so
the driver still treats the clocks as optional to not break
compatibility with old DTs. Maybe this warrants a comment in the
code...

Regards,
Lucas

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 2/3] drm/etnaviv: Don't ignore errors on getting clocks
  2020-05-14  8:18         ` Lucas Stach
@ 2020-05-14  8:27           ` Russell King - ARM Linux admin
  2020-05-14  8:40             ` Lucas Stach
  0 siblings, 1 reply; 14+ messages in thread
From: Russell King - ARM Linux admin @ 2020-05-14  8:27 UTC (permalink / raw)
  To: Lucas Stach
  Cc: linux-kernel, DRI mailing list, The etnaviv authors, Lubomir Rintel

On Thu, May 14, 2020 at 10:18:02AM +0200, Lucas Stach wrote:
> Am Mittwoch, den 13.05.2020, 23:41 -0300 schrieb Fabio Estevam:
> > On Wed, May 13, 2020 at 2:09 PM Fabio Estevam <festevam@gmail.com> wrote:
> > 
> > > The binding doc Documentation/devicetree/bindings/gpu/vivante,gc.yaml
> > > says that only the 'reg' clock could be optional, the others are
> > > required.
> > 
> > arch/arm/boot/dts/dove.dtsi only uses the 'core' clock.
> > arch/arm/boot/dts/stm32mp157.dtsi uses 'bus' and 'core'
> > 
> > Maybe the binding needs to be updated and it seems that using
> > devm_clk_get_optional() like you propose is safe.
> 
> The binding is correct as-is. We want to require those clocks to be
> present, but the dove DT was added before the binding was finalized, so
> the driver still treats the clocks as optional to not break
> compatibility with old DTs. Maybe this warrants a comment in the
> code...

The binding doc in mainline says:

  clocks:
    items:
      - description: AXI/master interface clock
      - description: GPU core clock
      - description: Shader clock (only required if GPU has feature PIPE_3D)
      - description: AHB/slave interface clock (only required if GPU can gate slave interface independently)
    minItems: 1
    maxItems: 4

  clock-names:
    items:
      enum: [ bus, core, shader, reg ]
    minItems: 1
    maxItems: 4

which looks correct to me - and means that Dove is compliant with that.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 10.2Mbps down 587kbps up
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 2/3] drm/etnaviv: Don't ignore errors on getting clocks
  2020-05-14  8:27           ` Russell King - ARM Linux admin
@ 2020-05-14  8:40             ` Lucas Stach
  2020-05-14  8:53               ` Russell King - ARM Linux admin
  0 siblings, 1 reply; 14+ messages in thread
From: Lucas Stach @ 2020-05-14  8:40 UTC (permalink / raw)
  To: Russell King - ARM Linux admin
  Cc: linux-kernel, DRI mailing list, The etnaviv authors, Lubomir Rintel

Am Donnerstag, den 14.05.2020, 09:27 +0100 schrieb Russell King - ARM Linux admin:
> On Thu, May 14, 2020 at 10:18:02AM +0200, Lucas Stach wrote:
> > Am Mittwoch, den 13.05.2020, 23:41 -0300 schrieb Fabio Estevam:
> > > On Wed, May 13, 2020 at 2:09 PM Fabio Estevam <festevam@gmail.com> wrote:
> > > 
> > > > The binding doc Documentation/devicetree/bindings/gpu/vivante,gc.yaml
> > > > says that only the 'reg' clock could be optional, the others are
> > > > required.
> > > 
> > > arch/arm/boot/dts/dove.dtsi only uses the 'core' clock.
> > > arch/arm/boot/dts/stm32mp157.dtsi uses 'bus' and 'core'
> > > 
> > > Maybe the binding needs to be updated and it seems that using
> > > devm_clk_get_optional() like you propose is safe.
> > 
> > The binding is correct as-is. We want to require those clocks to be
> > present, but the dove DT was added before the binding was finalized, so
> > the driver still treats the clocks as optional to not break
> > compatibility with old DTs. Maybe this warrants a comment in the
> > code...
> 
> The binding doc in mainline says:
> 
>   clocks:
>     items:
>       - description: AXI/master interface clock
>       - description: GPU core clock
>       - description: Shader clock (only required if GPU has feature PIPE_3D)
>       - description: AHB/slave interface clock (only required if GPU can gate slave interface independently)
>     minItems: 1
>     maxItems: 4
> 
>   clock-names:
>     items:
>       enum: [ bus, core, shader, reg ]
>     minItems: 1
>     maxItems: 4
> 
> which looks correct to me - and means that Dove is compliant with that.

The YAML binding actually did loose something in translation here,
which I didn't notice. Previously all those clocks were listed under
"Required properties", with the exceptions listed in parenthesis. So
the Dove GPU, which is a combined 2D/3D core should have axi, core and
shader clocks specified.

Regards,
Lucas

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 2/3] drm/etnaviv: Don't ignore errors on getting clocks
  2020-05-14  8:40             ` Lucas Stach
@ 2020-05-14  8:53               ` Russell King - ARM Linux admin
  2020-05-20 13:38                 ` Lubomir Rintel
  0 siblings, 1 reply; 14+ messages in thread
From: Russell King - ARM Linux admin @ 2020-05-14  8:53 UTC (permalink / raw)
  To: Lucas Stach
  Cc: linux-kernel, DRI mailing list, The etnaviv authors, Lubomir Rintel

On Thu, May 14, 2020 at 10:40:58AM +0200, Lucas Stach wrote:
> Am Donnerstag, den 14.05.2020, 09:27 +0100 schrieb Russell King - ARM Linux admin:
> > On Thu, May 14, 2020 at 10:18:02AM +0200, Lucas Stach wrote:
> > > Am Mittwoch, den 13.05.2020, 23:41 -0300 schrieb Fabio Estevam:
> > > > On Wed, May 13, 2020 at 2:09 PM Fabio Estevam <festevam@gmail.com> wrote:
> > > > 
> > > > > The binding doc Documentation/devicetree/bindings/gpu/vivante,gc.yaml
> > > > > says that only the 'reg' clock could be optional, the others are
> > > > > required.
> > > > 
> > > > arch/arm/boot/dts/dove.dtsi only uses the 'core' clock.
> > > > arch/arm/boot/dts/stm32mp157.dtsi uses 'bus' and 'core'
> > > > 
> > > > Maybe the binding needs to be updated and it seems that using
> > > > devm_clk_get_optional() like you propose is safe.
> > > 
> > > The binding is correct as-is. We want to require those clocks to be
> > > present, but the dove DT was added before the binding was finalized, so
> > > the driver still treats the clocks as optional to not break
> > > compatibility with old DTs. Maybe this warrants a comment in the
> > > code...
> > 
> > The binding doc in mainline says:
> > 
> >   clocks:
> >     items:
> >       - description: AXI/master interface clock
> >       - description: GPU core clock
> >       - description: Shader clock (only required if GPU has feature PIPE_3D)
> >       - description: AHB/slave interface clock (only required if GPU can gate slave interface independently)
> >     minItems: 1
> >     maxItems: 4
> > 
> >   clock-names:
> >     items:
> >       enum: [ bus, core, shader, reg ]
> >     minItems: 1
> >     maxItems: 4
> > 
> > which looks correct to me - and means that Dove is compliant with that.
> 
> The YAML binding actually did loose something in translation here,
> which I didn't notice. Previously all those clocks were listed under
> "Required properties", with the exceptions listed in parenthesis. So
> the Dove GPU, which is a combined 2D/3D core should have axi, core and
> shader clocks specified.

That may be your desire, but that is impossible without knowing that
(a) it has the clocks
(b) what those clocks are connected to

I guess we could "make something up" but as DT is supposed to describe
hardware, I don't see how we can satisfy that and your requirement.

The only thing that is known from the documentation is that there is
one clock for the GPU on Dove.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 10.2Mbps down 587kbps up
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 2/3] drm/etnaviv: Don't ignore errors on getting clocks
  2020-05-14  8:53               ` Russell King - ARM Linux admin
@ 2020-05-20 13:38                 ` Lubomir Rintel
  2020-05-20 14:04                   ` Lucas Stach
  0 siblings, 1 reply; 14+ messages in thread
From: Lubomir Rintel @ 2020-05-20 13:38 UTC (permalink / raw)
  To: Russell King - ARM Linux admin
  Cc: The etnaviv authors, DRI mailing list, linux-kernel

On Thu, May 14, 2020 at 09:53:08AM +0100, Russell King - ARM Linux admin wrote:
> On Thu, May 14, 2020 at 10:40:58AM +0200, Lucas Stach wrote:
> > Am Donnerstag, den 14.05.2020, 09:27 +0100 schrieb Russell King - ARM Linux admin:
> > > On Thu, May 14, 2020 at 10:18:02AM +0200, Lucas Stach wrote:
> > > > Am Mittwoch, den 13.05.2020, 23:41 -0300 schrieb Fabio Estevam:
> > > > > On Wed, May 13, 2020 at 2:09 PM Fabio Estevam <festevam@gmail.com> wrote:
> > > > > 
> > > > > > The binding doc Documentation/devicetree/bindings/gpu/vivante,gc.yaml
> > > > > > says that only the 'reg' clock could be optional, the others are
> > > > > > required.
> > > > > 
> > > > > arch/arm/boot/dts/dove.dtsi only uses the 'core' clock.
> > > > > arch/arm/boot/dts/stm32mp157.dtsi uses 'bus' and 'core'
> > > > > 
> > > > > Maybe the binding needs to be updated and it seems that using
> > > > > devm_clk_get_optional() like you propose is safe.
> > > > 
> > > > The binding is correct as-is. We want to require those clocks to be
> > > > present, but the dove DT was added before the binding was finalized, so
> > > > the driver still treats the clocks as optional to not break
> > > > compatibility with old DTs. Maybe this warrants a comment in the
> > > > code...
> > > 
> > > The binding doc in mainline says:
> > > 
> > >   clocks:
> > >     items:
> > >       - description: AXI/master interface clock
> > >       - description: GPU core clock
> > >       - description: Shader clock (only required if GPU has feature PIPE_3D)
> > >       - description: AHB/slave interface clock (only required if GPU can gate slave interface independently)
> > >     minItems: 1
> > >     maxItems: 4
> > > 
> > >   clock-names:
> > >     items:
> > >       enum: [ bus, core, shader, reg ]
> > >     minItems: 1
> > >     maxItems: 4
> > > 
> > > which looks correct to me - and means that Dove is compliant with that.
> > 
> > The YAML binding actually did loose something in translation here,
> > which I didn't notice. Previously all those clocks were listed under
> > "Required properties", with the exceptions listed in parenthesis. So
> > the Dove GPU, which is a combined 2D/3D core should have axi, core and
> > shader clocks specified.
> 
> That may be your desire, but that is impossible without knowing that
> (a) it has the clocks
> (b) what those clocks are connected to
> 
> I guess we could "make something up" but as DT is supposed to describe
> hardware, I don't see how we can satisfy that and your requirement.
> 
> The only thing that is known from the documentation is that there is
> one clock for the GPU on Dove.

Yes. This means that in fact "core" is the only required clock for all
implementations of vivante,gc and the common binding needs to be updated
to reflect that. I'll follow with a patch that does that, unless there
are strong objections.

If there are implementations that require different clock inputs, then they
need to use additional compatible string for the particular flavor and the
binding should have conditionals for them. Something like this:

  if:
    properties:
      compatible:
        contains:
          const: fsl,imx6sx-gpu
  then:
    properties:
      clocks:
        minItems: 4

Lubo
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 2/3] drm/etnaviv: Don't ignore errors on getting clocks
  2020-05-20 13:38                 ` Lubomir Rintel
@ 2020-05-20 14:04                   ` Lucas Stach
  2020-05-20 15:00                     ` Russell King - ARM Linux admin
  2020-05-23 10:22                     ` Lubomir Rintel
  0 siblings, 2 replies; 14+ messages in thread
From: Lucas Stach @ 2020-05-20 14:04 UTC (permalink / raw)
  To: Lubomir Rintel, Russell King - ARM Linux admin
  Cc: The etnaviv authors, DRI mailing list, linux-kernel

Am Mittwoch, den 20.05.2020, 15:38 +0200 schrieb Lubomir Rintel:
> On Thu, May 14, 2020 at 09:53:08AM +0100, Russell King - ARM Linux admin wrote:
> > On Thu, May 14, 2020 at 10:40:58AM +0200, Lucas Stach wrote:
> > > Am Donnerstag, den 14.05.2020, 09:27 +0100 schrieb Russell King - ARM Linux admin:
> > > > On Thu, May 14, 2020 at 10:18:02AM +0200, Lucas Stach wrote:
> > > > > Am Mittwoch, den 13.05.2020, 23:41 -0300 schrieb Fabio Estevam:
> > > > > > On Wed, May 13, 2020 at 2:09 PM Fabio Estevam <festevam@gmail.com> wrote:
> > > > > > 
> > > > > > > The binding doc Documentation/devicetree/bindings/gpu/vivante,gc.yaml
> > > > > > > says that only the 'reg' clock could be optional, the others are
> > > > > > > required.
> > > > > > 
> > > > > > arch/arm/boot/dts/dove.dtsi only uses the 'core' clock.
> > > > > > arch/arm/boot/dts/stm32mp157.dtsi uses 'bus' and 'core'
> > > > > > 
> > > > > > Maybe the binding needs to be updated and it seems that using
> > > > > > devm_clk_get_optional() like you propose is safe.
> > > > > 
> > > > > The binding is correct as-is. We want to require those clocks to be
> > > > > present, but the dove DT was added before the binding was finalized, so
> > > > > the driver still treats the clocks as optional to not break
> > > > > compatibility with old DTs. Maybe this warrants a comment in the
> > > > > code...
> > > > 
> > > > The binding doc in mainline says:
> > > > 
> > > >   clocks:
> > > >     items:
> > > >       - description: AXI/master interface clock
> > > >       - description: GPU core clock
> > > >       - description: Shader clock (only required if GPU has feature PIPE_3D)
> > > >       - description: AHB/slave interface clock (only required if GPU can gate slave interface independently)
> > > >     minItems: 1
> > > >     maxItems: 4
> > > > 
> > > >   clock-names:
> > > >     items:
> > > >       enum: [ bus, core, shader, reg ]
> > > >     minItems: 1
> > > >     maxItems: 4
> > > > 
> > > > which looks correct to me - and means that Dove is compliant with that.
> > > 
> > > The YAML binding actually did loose something in translation here,
> > > which I didn't notice. Previously all those clocks were listed under
> > > "Required properties", with the exceptions listed in parenthesis. So
> > > the Dove GPU, which is a combined 2D/3D core should have axi, core and
> > > shader clocks specified.
> > 
> > That may be your desire, but that is impossible without knowing that
> > (a) it has the clocks
> > (b) what those clocks are connected to
> > 
> > I guess we could "make something up" but as DT is supposed to describe
> > hardware, I don't see how we can satisfy that and your requirement.
> > 
> > The only thing that is known from the documentation is that there is
> > one clock for the GPU on Dove.
> 
> Yes. This means that in fact "core" is the only required clock for all
> implementations of vivante,gc and the common binding needs to be updated
> to reflect that. I'll follow with a patch that does that, unless there
> are strong objections.
> 
> If there are implementations that require different clock inputs, then they
> need to use additional compatible string for the particular flavor and the
> binding should have conditionals for them. Something like this:
> 
>   if:
>     properties:
>       compatible:
>         contains:
>           const: fsl,imx6sx-gpu
>   then:
>     properties:
>       clocks:
>         minItems: 4

The DT binding of a device should describe the hardware of the device,
not the specific integration into a SoC. Now it's a bit hard to make
any definite statements about the Vivante GC GPU module itself, as most
of the information we have is from reverse engineering. It's pretty
clear though that the GPU module has at least 2 clock inputs: axi and
core, as there is a feature bit that tells us if it's okay to gate the
axi clock independently from core. 

I'm not 100% sure about the older cores as found in Dove, but all the
more recent cores allow to clock the shader partition independently of
the core partition, so that's another clock input.

Now when it comes to a SoC integration, it's totally fine to have all
those GPU module clock inputs fed from the same clock source and behind
a shared gate maybe. But that doesn't change the clock inputs from the
device perspective, it's still 3 independent clock inputs, which then
just point to the same clock source in the DT.

imx6sx.dtsi is even a precedent of such a setup: all module clock
inputs are fed by a common clock and share a single gate.

Regards,
Lucas

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 2/3] drm/etnaviv: Don't ignore errors on getting clocks
  2020-05-20 14:04                   ` Lucas Stach
@ 2020-05-20 15:00                     ` Russell King - ARM Linux admin
  2020-05-23 10:22                     ` Lubomir Rintel
  1 sibling, 0 replies; 14+ messages in thread
From: Russell King - ARM Linux admin @ 2020-05-20 15:00 UTC (permalink / raw)
  To: Lucas Stach
  Cc: The etnaviv authors, DRI mailing list, linux-kernel, Lubomir Rintel

On Wed, May 20, 2020 at 04:04:39PM +0200, Lucas Stach wrote:
> Am Mittwoch, den 20.05.2020, 15:38 +0200 schrieb Lubomir Rintel:
> > Yes. This means that in fact "core" is the only required clock for all
> > implementations of vivante,gc and the common binding needs to be updated
> > to reflect that. I'll follow with a patch that does that, unless there
> > are strong objections.
> > 
> > If there are implementations that require different clock inputs, then they
> > need to use additional compatible string for the particular flavor and the
> > binding should have conditionals for them. Something like this:
> > 
> >   if:
> >     properties:
> >       compatible:
> >         contains:
> >           const: fsl,imx6sx-gpu
> >   then:
> >     properties:
> >       clocks:
> >         minItems: 4
> 
> The DT binding of a device should describe the hardware of the device,
> not the specific integration into a SoC. Now it's a bit hard to make
> any definite statements about the Vivante GC GPU module itself, as most
> of the information we have is from reverse engineering. It's pretty
> clear though that the GPU module has at least 2 clock inputs: axi and
> core, as there is a feature bit that tells us if it's okay to gate the
> axi clock independently from core. 
> 
> I'm not 100% sure about the older cores as found in Dove, but all the
> more recent cores allow to clock the shader partition independently of
> the core partition, so that's another clock input.
> 
> Now when it comes to a SoC integration, it's totally fine to have all
> those GPU module clock inputs fed from the same clock source and behind
> a shared gate maybe. But that doesn't change the clock inputs from the
> device perspective, it's still 3 independent clock inputs, which then
> just point to the same clock source in the DT.
> 
> imx6sx.dtsi is even a precedent of such a setup: all module clock
> inputs are fed by a common clock and share a single gate.

It's very good to stand on a pedistal, and try to dictate what you
want, but what you want is not always possible, and that is the case
here.  You have made your idea of how you see the hardware quite
plain.

Getting back to reality, again, what we know is that there is one
clock for the GC600 on Dove, since are register settings to control
that clock.

What we also know is that there is an AHB clock, but how that relates
to the rest of the system, we have no documentation.  It is that is
used for the AHB bus, which incidentally includes the GC600 for access
to its register set. I don't remember whether AHB peripherals require
the clock or not, that is something that would need to be checked.
If they do, then it seems that clock is missing from the binding.

Then there's a description of the AXI interface to the GC600 which
mentions no clock (see 10.7.2 below).  It has a clock, but what that
clock is, and how it relates to the rest of the system is not clearly
specified.

So, again, what you're basically asking for is for someone to guess
and throw some ficticious model into DT.

No, if it's not known, then we should not be guessing and throwing
random garbage into a SoC DT description - once it's in the DT
description, it has to be supported going forward, and if it's later
found to be incorrect, then we have a problem.

So, I don't see how Dove can meet your requirements, and I think you
have to compromise on this, and just accept that Dove only has one
known clock.

If you want to continue being pedantic about this, then in order to
support that pedanty, we need to add an AHB clock to all Vivante GC
descriptions as well since the AHB interface requires it - there it
is called HCLK in the AHB specs.  Here is the extract from the Dove
documentation for the AHB interface:

10.7.1              AHB Interface
                    The main features of the AHB interface are:
                    n    256k addressable register space
                    n    32-bit accesses only (no bursts)
                    n    32-bit data bus
                    n    Error response for illegal accesses
                    n    Asynchronous interface to the Graphics Core
                    n    Interrupt support
                    The interface uses a separate clock that is slower
                    than the AXI Bus clock, thus allowing a more
                    relaxed logic design. Because the Core clock is
                    different from the interface clock, design within
                    the GPU Core ensures that incoming and outgoing
                    data are handled properly when they cross clock
                    boundaries.
                    The GPU block occupies 256 KB (64k 32-bit words) of
                    the system address space. An AHB ERROR response is
                    returned if an illegal access is detected. Only
                    32-bit reads and writes are permitted.

10.7.2              AXI Interface
                    The main features of the AXI interface are:
                    n    64-bit independent read and write data buses
                    n    Multiple Burst length (8 bytes, 16 bytes,
                         32 bytes, or 64 bytes)
                    n    High-performance out-of-order / 16 multiple
                         outstanding accesses
                    n    Supports out-of-order return data for
                         different clients
                    n    Asynchronous interface to the graphics core
                    The AXI Interface included in the graphics GPU is
                    used to retrieve data from the memory attached to
                    the AXI Interconnect.
                    The possible graphics clients using the AXI to fetch
                    data are:
                    n   DMA (to fetch commands, states, index and
                        vertex data)
                    n   Rasterizer
                    n   Texture engine (for reading of texture data)
                    n   Pixel engine (for reading and writing of Z and
                        color buffer)

Now, as far as clocking goes:

4.3                   Clocking
4.3.1                 Clock Domains
                      The 88AP510 has one PLL for the CPU and DDR Memory
                      Controller, and a Core PLL that generates the AXI,
                      Mbus, and internal clocks.
                      The CPU and DDR Memory Controller operate
                      synchronously at a ratio of N:1 (N=1..10), 5:2 or 7:2.
                      The GPU, VMeta■, and Display controller operate in
                      the AXI bus clock domain, which is asynchronous to
                      the CPU clock domain. The synchronization between
                      the AXI and CPU clock domains is implemented by the
                      Memory Controller Bridge (MCB). The Mbus is clocked
                      at Tclk, which is asynchronous to the AXI clock
                      domain. Synchronization between the Mbus and the AXI
                      clock domains is accomplished by the Upstream bridge
                      and the Downstream bridge.
4.3.2                 Core PLL Clock Tree
                      The GPU, VMeta■, and Display Controller derive the
                      operating clock from the Core PLL through the
                      dedicated PLL clock dividers, and are asynchronous
                      to the AXI interconnect bus clock. The clock
                      tree is depicted in Figure 5.

                      Figure 4: AXI Units Clock Tree

                      <diagram of Core-PLL feeding the display controller,
                       VMeta and GPU clocks, through dividers, which are
                       not the AXI clock but the functional clocks for these
                       peripherals. No mention of how the AXI clock is
                       derived.>

Figure 5 is something entirely different, so I suspect they mean figure
4 there.

So, as I say, you're basically asking for someone to make something up
to suit your requirements and throw that into DT.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC for 0.8m (est. 1762m) line in suburbia: sync at 13.1Mbps down 424kbps up
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: [PATCH 2/3] drm/etnaviv: Don't ignore errors on getting clocks
  2020-05-20 14:04                   ` Lucas Stach
  2020-05-20 15:00                     ` Russell King - ARM Linux admin
@ 2020-05-23 10:22                     ` Lubomir Rintel
  1 sibling, 0 replies; 14+ messages in thread
From: Lubomir Rintel @ 2020-05-23 10:22 UTC (permalink / raw)
  To: Lucas Stach
  Cc: The etnaviv authors, linux-kernel, DRI mailing list,
	Russell King - ARM Linux admin

Cc += robh

On Wed, May 20, 2020 at 04:04:39PM +0200, Lucas Stach wrote:
> Am Mittwoch, den 20.05.2020, 15:38 +0200 schrieb Lubomir Rintel:
> > On Thu, May 14, 2020 at 09:53:08AM +0100, Russell King - ARM Linux admin wrote:
> > > On Thu, May 14, 2020 at 10:40:58AM +0200, Lucas Stach wrote:
> > > > Am Donnerstag, den 14.05.2020, 09:27 +0100 schrieb Russell King - ARM Linux admin:
> > > > > On Thu, May 14, 2020 at 10:18:02AM +0200, Lucas Stach wrote:
> > > > > > Am Mittwoch, den 13.05.2020, 23:41 -0300 schrieb Fabio Estevam:
> > > > > > > On Wed, May 13, 2020 at 2:09 PM Fabio Estevam <festevam@gmail.com> wrote:
> > > > > > > 
> > > > > > > > The binding doc Documentation/devicetree/bindings/gpu/vivante,gc.yaml
> > > > > > > > says that only the 'reg' clock could be optional, the others are
> > > > > > > > required.
> > > > > > > 
> > > > > > > arch/arm/boot/dts/dove.dtsi only uses the 'core' clock.
> > > > > > > arch/arm/boot/dts/stm32mp157.dtsi uses 'bus' and 'core'
> > > > > > > 
> > > > > > > Maybe the binding needs to be updated and it seems that using
> > > > > > > devm_clk_get_optional() like you propose is safe.
> > > > > > 
> > > > > > The binding is correct as-is. We want to require those clocks to be
> > > > > > present, but the dove DT was added before the binding was finalized, so
> > > > > > the driver still treats the clocks as optional to not break
> > > > > > compatibility with old DTs. Maybe this warrants a comment in the
> > > > > > code...
> > > > > 
> > > > > The binding doc in mainline says:
> > > > > 
> > > > >   clocks:
> > > > >     items:
> > > > >       - description: AXI/master interface clock
> > > > >       - description: GPU core clock
> > > > >       - description: Shader clock (only required if GPU has feature PIPE_3D)
> > > > >       - description: AHB/slave interface clock (only required if GPU can gate slave interface independently)
> > > > >     minItems: 1
> > > > >     maxItems: 4
> > > > > 
> > > > >   clock-names:
> > > > >     items:
> > > > >       enum: [ bus, core, shader, reg ]
> > > > >     minItems: 1
> > > > >     maxItems: 4
> > > > > 
> > > > > which looks correct to me - and means that Dove is compliant with that.
> > > > 
> > > > The YAML binding actually did loose something in translation here,
> > > > which I didn't notice. Previously all those clocks were listed under
> > > > "Required properties", with the exceptions listed in parenthesis. So
> > > > the Dove GPU, which is a combined 2D/3D core should have axi, core and
> > > > shader clocks specified.
> > > 
> > > That may be your desire, but that is impossible without knowing that
> > > (a) it has the clocks
> > > (b) what those clocks are connected to
> > > 
> > > I guess we could "make something up" but as DT is supposed to describe
> > > hardware, I don't see how we can satisfy that and your requirement.
> > > 
> > > The only thing that is known from the documentation is that there is
> > > one clock for the GPU on Dove.
> > 
> > Yes. This means that in fact "core" is the only required clock for all
> > implementations of vivante,gc and the common binding needs to be updated
> > to reflect that. I'll follow with a patch that does that, unless there
> > are strong objections.
> > 
> > If there are implementations that require different clock inputs, then they
> > need to use additional compatible string for the particular flavor and the
> > binding should have conditionals for them. Something like this:
> > 
> >   if:
> >     properties:
> >       compatible:
> >         contains:
> >           const: fsl,imx6sx-gpu
> >   then:
> >     properties:
> >       clocks:
> >         minItems: 4
> 
> The DT binding of a device should describe the hardware of the device,
> not the specific integration into a SoC.

I'm not too convinced about this. While I'm not able to produce a
reference from a quick view either into ieee1275 and DTSpec, I believe
the DT describes the hardware from software's perspective.

That is, there's no point in describing hardware implementation details
that have no bearing on software interface (such as a single
software-controlled clock being routed to different parts of a chip).

Adding Rob to Cc, he will likely be able to clarify.

> Now it's a bit hard to make
> any definite statements about the Vivante GC GPU module itself, as most
> of the information we have is from reverse engineering. It's pretty
> clear though that the GPU module has at least 2 clock inputs: axi and
> core, as there is a feature bit that tells us if it's okay to gate the
> axi clock independently from core. 
> 
> I'm not 100% sure about the older cores as found in Dove, but all the
> more recent cores allow to clock the shader partition independently of
> the core partition, so that's another clock input.
> 
> Now when it comes to a SoC integration, it's totally fine to have all
> those GPU module clock inputs fed from the same clock source and behind
> a shared gate maybe. But that doesn't change the clock inputs from the
> device perspective, it's still 3 independent clock inputs, which then
> just point to the same clock source in the DT.
> 
> imx6sx.dtsi is even a precedent of such a setup: all module clock
> inputs are fed by a common clock and share a single gate.
> 
> Regards,
> Lucas

Lubo
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, back to index

Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <[PATCH 0/3] drm/etnaviv: Clock fixes>
     [not found] ` <20200513150007.1315395-1-lkundrak@v3.sk>
2020-05-13 15:00   ` [PATCH 1/3] drm/etnaviv: Fix error path on failure to enable bus clk Lubomir Rintel
2020-05-13 15:00   ` [PATCH 2/3] drm/etnaviv: Don't ignore errors on getting clocks Lubomir Rintel
2020-05-13 16:07     ` Fabio Estevam
2020-05-13 17:09     ` Fabio Estevam
2020-05-14  2:41       ` Fabio Estevam
2020-05-14  8:18         ` Lucas Stach
2020-05-14  8:27           ` Russell King - ARM Linux admin
2020-05-14  8:40             ` Lucas Stach
2020-05-14  8:53               ` Russell King - ARM Linux admin
2020-05-20 13:38                 ` Lubomir Rintel
2020-05-20 14:04                   ` Lucas Stach
2020-05-20 15:00                     ` Russell King - ARM Linux admin
2020-05-23 10:22                     ` Lubomir Rintel
2020-05-13 15:00   ` [PATCH 3/3] drm/etnaviv: Simplify clock enable/disable Lubomir Rintel

dri-devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dri-devel/0 dri-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dri-devel dri-devel/ https://lore.kernel.org/dri-devel \
		dri-devel@lists.freedesktop.org
	public-inbox-index dri-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.dri-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git