dri-devel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v3] drm/exynos: Remove dev_err() on platform_get_irq() failure
       [not found] <CGME20200521143647epcas5p279d486b29125419c67ff96e0b5b1454e@epcas5p2.samsung.com>
@ 2020-05-21 14:22 ` Tamseel Shams
  0 siblings, 0 replies; only message in thread
From: Tamseel Shams @ 2020-05-21 14:22 UTC (permalink / raw)
  To: inki.dae, jy0922.shim, sw0312.kim, kyungmin.park, airlied, daniel
  Cc: linux-samsung-soc, shaik.ameer, linux-kernel, krzk, dri-devel,
	alim.akhtar, Tamseel Shams, linux-arm-kernel

platform_get_irq() will call dev_err() itself on failure,
so there is no need for the driver to also do this.
This is detected by coccinelle.

Signed-off-by: Tamseel Shams <m.shams@samsung.com>
---
- Changes since v2:
* Addressed Inki Dae comments

 drivers/gpu/drm/exynos/exynos_drm_g2d.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c
index fcee33a43aca..03be31427181 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c
@@ -1498,7 +1498,6 @@ static int g2d_probe(struct platform_device *pdev)
 
 	g2d->irq = platform_get_irq(pdev, 0);
 	if (g2d->irq < 0) {
-		dev_err(dev, "failed to get irq\n");
 		ret = g2d->irq;
 		goto err_put_clk;
 	}
-- 
2.17.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <CGME20200521143647epcas5p279d486b29125419c67ff96e0b5b1454e@epcas5p2.samsung.com>
2020-05-21 14:22 ` [PATCH v3] drm/exynos: Remove dev_err() on platform_get_irq() failure Tamseel Shams

dri-devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dri-devel/0 dri-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dri-devel dri-devel/ https://lore.kernel.org/dri-devel \
		dri-devel@lists.freedesktop.org
	public-inbox-index dri-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.dri-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git