From: Tanmay Shah <tanmay@codeaurora.org>
To: devicetree@vger.kernel.org
Cc: Tanmay Shah <tanmay@codeaurora.org>,
sam@ravnborg.org, linux-arm-msm@vger.kernel.org,
abhinavk@codeaurora.org, swboyd@chromium.org,
seanpaul@chromium.org, dri-devel@lists.freedesktop.org,
Vara Reddy <varar@codeaurora.org>,
freedreno@lists.freedesktop.org, linux-clk@vger.kernel.org,
chandanu@codeaurora.org
Subject: [PATCH v6 1/5] dt-bindings: msm/dp: add bindings of DP/DP-PLL driver for Snapdragon
Date: Mon, 8 Jun 2020 20:38:18 -0700 [thread overview]
Message-ID: <20200609033818.9028-1-tanmay@codeaurora.org> (raw)
From: Chandan Uddaraju <chandanu@codeaurora.org>
Add bindings for Snapdragon DisplayPort controller driver.
Changes in V2:
Provide details about sel-gpio
Changes in V4:
Provide details about max dp lanes
Change the commit text
Changes in V5:
moved dp.txt to yaml file
Changes in v6:
- Squash all AUX LUT properties into one pattern Property
- Make aux-cfg[0-9]-settings properties optional
- Remove PLL/PHY bindings from DP controller dts
- Add DP clocks description
- Remove _clk suffix from clock names
- Rename pixel clock to stream_pixel
- Remove redundant bindings (GPIO, PHY, HDCP clock, etc..)
- Fix indentation
- Add Display Port as interface of DPU in DPU bindings
and add port mapping accordingly.
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Vara Reddy <varar@codeaurora.org>
Signed-off-by: Tanmay Shah <tanmay@codeaurora.org>
---
.../devicetree/bindings/display/msm/dp-sc7180.yaml | 142 +++++++++++++++++++++
.../devicetree/bindings/display/msm/dpu.txt | 8 ++
2 files changed, 150 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/msm/dp-sc7180.yaml
diff --git a/Documentation/devicetree/bindings/display/msm/dp-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dp-sc7180.yaml
new file mode 100644
index 0000000..5fdb915
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dp-sc7180.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dp-sc7180.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Port Controller.
+
+maintainers:
+ - Chandan Uddaraju <chandanu@codeaurora.org>
+ - Vara Reddy <varar@codeaurora.org>
+ - Tanmay Shah <tanmay@codeaurora.org>
+
+description: |
+ Device tree bindings for MSM Display Port which supports DP host controllers
+ that are compatible with VESA Display Port interface specification.
+
+properties:
+ compatible:
+ items:
+ - const: qcom,dp-display
+
+ cell-index:
+ description: Specifies the controller instance.
+
+ reg:
+ items:
+ - description: DP controller registers
+
+ interrupts:
+ description: The interrupt signal from the DP block.
+
+ clocks:
+ description: List of clock specifiers for clocks needed by the device.
+ items:
+ - description: Display Port AUX clock
+ - description: Display Port Link clock
+ - description: Link interface clock between DP and PHY
+ - description: Display Port Pixel clock
+ - description: Root clock generator for pixel clock
+
+ clock-names:
+ description: |
+ Device clock names in the same order as mentioned in clocks property.
+ The required clocks are mentioned below.
+ items:
+ - const: core_aux
+ - const: ctrl_link
+ - const: ctrl_link_iface
+ - const: stream_pixel
+ - const: pixel_rcg
+ "#clock-cells":
+ const: 1
+
+ vdda-1p2-supply:
+ description: phandle to vdda 1.2V regulator node.
+
+ vdda-0p9-supply:
+ description: phandle to vdda 0.9V regulator node.
+
+ data-lanes = <0 1>:
+ type: object
+ description: Maximum number of lanes that can be used for Display port.
+
+ ports:
+ description: |
+ Contains display port controller endpoint subnode.
+ remote-endpoint: |
+ For port@0, set to phandle of the connected panel/bridge's
+ input endpoint. For port@1, set to the DPU interface output.
+ Documentation/devicetree/bindings/graph.txt and
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+patternProperties:
+ "^aux-cfg([0-9])-settings$":
+ type: object
+ description: |
+ Specifies the DP AUX configuration [0-9] settings.
+ The first entry in this array corresponds to the register offset
+ within DP AUX, while the remaining entries indicate the
+ programmable values.
+
+required:
+ - compatible
+ - cell-index
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - vdda-1p2-supply
+ - vdda-0p9-supply
+ - data-lanes
+ - ports
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+ #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+ msm_dp: displayport-controller@ae90000{
+ compatible = "qcom,dp-display";
+ cell-index = <0>;
+ reg = <0 0xae90000 0 0x1400>;
+ reg-names = "dp_controller";
+
+ interrupt-parent = <&display_subsystem>;
+ interrupts = <12 0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+ clock-names = "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface", "stream_pixel",
+ "pixel_rcg";
+ #clock-cells = <1>;
+
+ vdda-1p2-supply = <&vreg_l3c_1p2>;
+ vdda-0p9-supply = <&vreg_l4a_0p8>;
+
+ data-lanes = <0 1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dp_in: endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dp_out: endpoint {
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
index 551ae26..30c8ab4 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
@@ -65,6 +65,7 @@ Required properties:
Port 0 -> DPU_INTF1 (DSI1)
Port 1 -> DPU_INTF2 (DSI2)
+ Port 2 -> DPU_INTF0 (DP)
Optional properties:
- assigned-clocks: list of clock specifiers for clocks needing rate assignment
@@ -136,6 +137,13 @@ Example:
remote-endpoint = <&dsi1_in>;
};
};
+
+ port@2 {
+ reg = <2>;
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&dp_in>;
+ };
+ };
};
};
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2020-06-09 3:43 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-09 3:38 Tanmay Shah [this message]
2020-06-10 2:15 ` [PATCH v6 1/5] dt-bindings: msm/dp: add bindings of DP/DP-PLL driver for Snapdragon Stephen Boyd
2020-06-11 20:07 ` tanmay
2020-06-16 10:55 ` Stephen Boyd
2020-06-16 22:30 ` tanmay
2020-06-12 1:50 [PATCH v6 0/5] Add support for DisplayPort driver on Tanmay Shah
2020-06-12 1:50 ` [PATCH v6 1/5] dt-bindings: msm/dp: add bindings of DP/DP-PLL driver for Snapdragon Tanmay Shah
2020-06-12 16:21 ` Rob Herring
2020-06-16 11:15 ` Stephen Boyd
2020-06-17 15:38 ` Rob Herring
2020-06-17 19:52 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200609033818.9028-1-tanmay@codeaurora.org \
--to=tanmay@codeaurora.org \
--cc=abhinavk@codeaurora.org \
--cc=chandanu@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=sam@ravnborg.org \
--cc=seanpaul@chromium.org \
--cc=swboyd@chromium.org \
--cc=varar@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).