From: Adrian Ratiu <adrian.ratiu@collabora.com>
To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-rockchip@lists.infradead.org,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>,
Adrian Pop <pop.adrian61@gmail.com>,
Jonas Karlman <jonas@kwiboo.se>,
Philippe CORNU <philippe.cornu@st.com>,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
Yannick FERTRE <yannick.fertre@st.com>,
Andrzej Hajda <a.hajda@samsung.com>,
linux-imx@nxp.com, kernel@collabora.com,
linux-stm32@st-md-mailman.stormreply.com,
Arnaud Ferraris <arnaud.ferraris@collabora.com>
Subject: [PATCH v9 09/11] drm: bridge: dw-mipi-dsi: split low power cfg register into fields
Date: Tue, 9 Jun 2020 20:49:57 +0300 [thread overview]
Message-ID: <20200609174959.955926-10-adrian.ratiu@collabora.com> (raw)
In-Reply-To: <20200609174959.955926-1-adrian.ratiu@collabora.com>
According to the Host Registers documentation for IMX, STM and RK
the LP cfg register should not be written entirely in one go because
some bits are reserved and should be kept to reset values, for eg.
BIT(15) which is reserved in all versions.
This also cleans up the code by removing the the ugly defines
and making field ranges & values written more explicit.
Tested-by: Adrian Pop <pop.adrian61@gmail.com>
Tested-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
---
New in v6.
---
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 105 ++++++------------
1 file changed, 33 insertions(+), 72 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
index 70df0578cbe7b..1e47d40b5becb 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
@@ -120,60 +120,6 @@
#define DSI_TO_CNT_CFG_V101 0x40
#define DSI_PCKHDL_CFG_V101 0x18
-#define MAX_RD_PKT_SIZE_LP BIT(24)
-#define DCS_LW_TX_LP BIT(19)
-#define DCS_SR_0P_TX_LP BIT(18)
-#define DCS_SW_1P_TX_LP BIT(17)
-#define DCS_SW_0P_TX_LP BIT(16)
-#define GEN_LW_TX_LP BIT(14)
-#define GEN_SR_2P_TX_LP BIT(13)
-#define GEN_SR_1P_TX_LP BIT(12)
-#define GEN_SR_0P_TX_LP BIT(11)
-#define GEN_SW_2P_TX_LP BIT(10)
-#define GEN_SW_1P_TX_LP BIT(9)
-#define GEN_SW_0P_TX_LP BIT(8)
-#define TEAR_FX_EN BIT(0)
-
-#define CMD_MODE_ALL_LP (MAX_RD_PKT_SIZE_LP | \
- DCS_LW_TX_LP | \
- DCS_SR_0P_TX_LP | \
- DCS_SW_1P_TX_LP | \
- DCS_SW_0P_TX_LP | \
- GEN_LW_TX_LP | \
- GEN_SR_2P_TX_LP | \
- GEN_SR_1P_TX_LP | \
- GEN_SR_0P_TX_LP | \
- GEN_SW_2P_TX_LP | \
- GEN_SW_1P_TX_LP | \
- GEN_SW_0P_TX_LP)
-
-#define EN_TEAR_FX_V101 BIT(14)
-#define DCS_LW_TX_LP_V101 BIT(12)
-#define GEN_LW_TX_LP_V101 BIT(11)
-#define MAX_RD_PKT_SIZE_LP_V101 BIT(10)
-#define DCS_SW_2P_TX_LP_V101 BIT(9)
-#define DCS_SW_1P_TX_LP_V101 BIT(8)
-#define DCS_SW_0P_TX_LP_V101 BIT(7)
-#define GEN_SR_2P_TX_LP_V101 BIT(6)
-#define GEN_SR_1P_TX_LP_V101 BIT(5)
-#define GEN_SR_0P_TX_LP_V101 BIT(4)
-#define GEN_SW_2P_TX_LP_V101 BIT(3)
-#define GEN_SW_1P_TX_LP_V101 BIT(2)
-#define GEN_SW_0P_TX_LP_V101 BIT(1)
-
-#define CMD_MODE_ALL_LP_V101 (DCS_LW_TX_LP_V101 | \
- GEN_LW_TX_LP_V101 | \
- MAX_RD_PKT_SIZE_LP_V101 | \
- DCS_SW_2P_TX_LP_V101 | \
- DCS_SW_1P_TX_LP_V101 | \
- DCS_SW_0P_TX_LP_V101 | \
- GEN_SR_2P_TX_LP_V101 | \
- GEN_SR_1P_TX_LP_V101 | \
- GEN_SR_0P_TX_LP_V101 | \
- GEN_SW_2P_TX_LP_V101 | \
- GEN_SW_1P_TX_LP_V101 | \
- GEN_SW_0P_TX_LP_V101)
-
#define DSI_GEN_HDR 0x6c
#define DSI_GEN_PLD_DATA 0x70
@@ -257,7 +203,11 @@ struct dw_mipi_dsi {
struct regmap_field *field_dpi_vsync_active_low;
struct regmap_field *field_dpi_hsync_active_low;
struct regmap_field *field_cmd_mode_ack_rqst_en;
- struct regmap_field *field_cmd_mode_all_lp_en;
+ struct regmap_field *field_cmd_mode_gen_sw_sr_en;
+ struct regmap_field *field_cmd_mode_dcs_sw_sr_en;
+ struct regmap_field *field_cmd_mode_gen_lw_en;
+ struct regmap_field *field_cmd_mode_dcs_lw_en;
+ struct regmap_field *field_cmd_mode_max_rd_pkt_size;
struct regmap_field *field_cmd_mode_en;
struct regmap_field *field_cmd_pkt_status;
struct regmap_field *field_vid_mode_en;
@@ -315,7 +265,11 @@ struct dw_mipi_dsi_variant {
struct reg_field cfg_dpi_hsync_active_low;
struct reg_field cfg_cmd_mode_en;
struct reg_field cfg_cmd_mode_ack_rqst_en;
- struct reg_field cfg_cmd_mode_all_lp_en;
+ struct reg_field cfg_cmd_mode_gen_sw_sr_en;
+ struct reg_field cfg_cmd_mode_dcs_sw_sr_en;
+ struct reg_field cfg_cmd_mode_gen_lw_en;
+ struct reg_field cfg_cmd_mode_dcs_lw_en;
+ struct reg_field cfg_cmd_mode_max_rd_pkt_size;
struct reg_field cfg_cmd_pkt_status;
struct reg_field cfg_vid_mode_en;
struct reg_field cfg_vid_mode_type;
@@ -366,7 +320,11 @@ static const struct dw_mipi_dsi_variant dw_mipi_dsi_v130_v131_layout = {
.cfg_dpi_vsync_active_low = REG_FIELD(DSI_DPI_CFG_POL, 1, 1),
.cfg_dpi_hsync_active_low = REG_FIELD(DSI_DPI_CFG_POL, 2, 2),
.cfg_cmd_mode_ack_rqst_en = REG_FIELD(DSI_CMD_MODE_CFG, 1, 1),
- .cfg_cmd_mode_all_lp_en = REG_FIELD(DSI_CMD_MODE_CFG, 8, 24),
+ .cfg_cmd_mode_gen_sw_sr_en = REG_FIELD(DSI_CMD_MODE_CFG, 8, 13),
+ .cfg_cmd_mode_gen_lw_en = REG_FIELD(DSI_CMD_MODE_CFG, 14, 14),
+ .cfg_cmd_mode_dcs_sw_sr_en = REG_FIELD(DSI_CMD_MODE_CFG, 16, 18),
+ .cfg_cmd_mode_dcs_lw_en = REG_FIELD(DSI_CMD_MODE_CFG, 19, 19),
+ .cfg_cmd_mode_max_rd_pkt_size = REG_FIELD(DSI_CMD_MODE_CFG, 24, 24),
.cfg_cmd_mode_en = REG_FIELD(DSI_MODE_CFG, 0, 31),
.cfg_cmd_pkt_status = REG_FIELD(DSI_CMD_PKT_STATUS, 0, 31),
.cfg_vid_mode_en = REG_FIELD(DSI_MODE_CFG, 0, 31),
@@ -418,7 +376,11 @@ static const struct dw_mipi_dsi_variant dw_mipi_dsi_v101_layout = {
.cfg_dpi_vsync_active_low = REG_FIELD(DSI_DPI_CFG, 6, 6),
.cfg_dpi_hsync_active_low = REG_FIELD(DSI_DPI_CFG, 7, 7),
.cfg_cmd_mode_en = REG_FIELD(DSI_CMD_MODE_CFG_V101, 0, 0),
- .cfg_cmd_mode_all_lp_en = REG_FIELD(DSI_CMD_MODE_CFG_V101, 1, 12),
+ .cfg_cmd_mode_gen_sw_sr_en = REG_FIELD(DSI_CMD_MODE_CFG, 1, 6),
+ .cfg_cmd_mode_dcs_sw_sr_en = REG_FIELD(DSI_CMD_MODE_CFG, 7, 9),
+ .cfg_cmd_mode_max_rd_pkt_size = REG_FIELD(DSI_CMD_MODE_CFG, 10, 10),
+ .cfg_cmd_mode_gen_lw_en = REG_FIELD(DSI_CMD_MODE_CFG, 11, 11),
+ .cfg_cmd_mode_dcs_lw_en = REG_FIELD(DSI_CMD_MODE_CFG, 12, 12),
.cfg_cmd_mode_ack_rqst_en = REG_FIELD(DSI_CMD_MODE_CFG_V101, 13, 13),
.cfg_cmd_pkt_status = REG_FIELD(DSI_CMD_PKT_STATUS_V101, 0, 14),
.cfg_vid_mode_en = REG_FIELD(DSI_VID_MODE_CFG_V101, 0, 0),
@@ -554,23 +516,18 @@ static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
const struct mipi_dsi_msg *msg)
{
bool lpm = msg->flags & MIPI_DSI_MSG_USE_LPM;
- u32 cmd_mode_lp = 0;
-
- switch (dsi->hw_version) {
- case HWVER_130:
- case HWVER_131:
- cmd_mode_lp = CMD_MODE_ALL_LP;
- break;
- case HWVER_101:
- cmd_mode_lp = CMD_MODE_ALL_LP_V101;
- break;
- }
if (msg->flags & MIPI_DSI_MSG_REQ_ACK)
regmap_field_write(dsi->field_cmd_mode_ack_rqst_en, 1);
- if (lpm)
- regmap_field_write(dsi->field_cmd_mode_all_lp_en, cmd_mode_lp);
+ if (lpm) {
+ regmap_field_write(dsi->field_cmd_mode_gen_sw_sr_en,
+ ENABLE_LOW_POWER);
+ regmap_field_write(dsi->field_cmd_mode_dcs_sw_sr_en, 7);
+ regmap_field_write(dsi->field_cmd_mode_gen_lw_en, 1);
+ regmap_field_write(dsi->field_cmd_mode_dcs_lw_en, 1);
+ regmap_field_write(dsi->field_cmd_mode_max_rd_pkt_size, 1);
+ }
regmap_field_write(dsi->field_phy_txrequestclkhs, lpm ? 0 : 1);
}
@@ -1256,7 +1213,11 @@ static int dw_mipi_dsi_regmap_fields_init(struct dw_mipi_dsi *dsi)
INIT_FIELD(dpi_vsync_active_low);
INIT_FIELD(dpi_hsync_active_low);
INIT_FIELD(cmd_mode_ack_rqst_en);
- INIT_FIELD(cmd_mode_all_lp_en);
+ INIT_FIELD(cmd_mode_gen_sw_sr_en);
+ INIT_FIELD(cmd_mode_dcs_sw_sr_en);
+ INIT_FIELD(cmd_mode_gen_lw_en);
+ INIT_FIELD(cmd_mode_dcs_lw_en);
+ INIT_FIELD(cmd_mode_max_rd_pkt_size);
INIT_FIELD(cmd_mode_en);
INIT_FIELD(cmd_pkt_status);
INIT_FIELD(vid_mode_en);
--
2.27.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-06-09 17:48 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-09 17:49 [PATCH v9 00/11] Genericize DW MIPI DSI bridge and add i.MX 6 driver Adrian Ratiu
2020-06-09 17:49 ` [PATCH v9 01/11] drm: bridge: dw_mipi_dsi: add initial regmap infrastructure Adrian Ratiu
2020-06-09 17:49 ` [PATCH v9 02/11] drm: bridge: dw_mipi_dsi: abstract register access using reg_fields Adrian Ratiu
2020-06-09 17:49 ` [PATCH v9 03/11] drm: bridge: dw_mipi_dsi: add dsi v1.01 support Adrian Ratiu
2020-06-10 12:20 ` Yannick FERTRE
2020-06-09 17:49 ` [PATCH v9 04/11] drm: bridge: dw_mipi_dsi: remove bind/unbind API Adrian Ratiu
2020-06-10 12:21 ` Yannick FERTRE
2020-06-09 17:49 ` [PATCH v9 05/11] dt-bindings: display: add i.MX6 MIPI DSI host controller doc Adrian Ratiu
2020-06-12 21:11 ` Rob Herring
2020-06-09 17:49 ` [PATCH v9 06/11] ARM: dts: imx6qdl: add missing mipi dsi properties Adrian Ratiu
2020-06-09 17:49 ` [PATCH v9 07/11] drm: imx: Add i.MX 6 MIPI DSI host platform driver Adrian Ratiu
2020-06-09 17:49 ` [PATCH v9 08/11] drm: stm: dw-mipi-dsi: let the bridge handle the HW version check Adrian Ratiu
2020-06-09 17:49 ` Adrian Ratiu [this message]
2020-06-10 12:21 ` [PATCH v9 09/11] drm: bridge: dw-mipi-dsi: split low power cfg register into fields Yannick FERTRE
2020-06-09 17:49 ` [PATCH v9 10/11] drm: bridge: dw-mipi-dsi: fix bad register field offsets Adrian Ratiu
2020-06-10 12:22 ` Yannick FERTRE
2020-06-09 17:49 ` [PATCH v9 11/11] Documentation: gpu: todo: Add dw-mipi-dsi consolidation plan Adrian Ratiu
2020-06-29 8:47 ` [PATCH v9 00/11] Genericize DW MIPI DSI bridge and add i.MX 6 driver Neil Armstrong
2020-07-01 6:35 ` Adrian Ratiu
2020-07-01 7:50 ` Neil Armstrong
2020-08-15 13:05 ` Ezequiel Garcia
2020-08-24 9:47 ` Neil Armstrong
2020-09-15 13:05 ` Neil Armstrong
2020-10-23 15:32 ` Adrian Ratiu
2020-07-01 12:50 ` Heiko Stübner
2020-07-01 20:32 ` Adrian Ratiu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200609174959.955926-10-adrian.ratiu@collabora.com \
--to=adrian.ratiu@collabora.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=a.hajda@samsung.com \
--cc=arnaud.ferraris@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jernej.skrabec@siol.net \
--cc=jonas@kwiboo.se \
--cc=kernel@collabora.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=philippe.cornu@st.com \
--cc=pop.adrian61@gmail.com \
--cc=yannick.fertre@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).