From: Ondrej Jirman <megous@megous.com>
To: linux-sunxi@googlegroups.com,
"Thierry Reding" <thierry.reding@gmail.com>,
"Sam Ravnborg" <sam@ravnborg.org>,
"David Airlie" <airlied@linux.ie>,
"Daniel Vetter" <daniel@ffwll.ch>,
"Guido Günther" <agx@sigxcpu.org>,
"Purism Kernel Team" <kernel@puri.sm>,
"Rob Herring" <robh+dt@kernel.org>,
"Maxime Ripard" <mripard@kernel.org>,
"Chen-Yu Tsai" <wens@csie.org>,
"Linus Walleij" <linus.walleij@linaro.org>,
"Icenowy Zheng" <icenowy@aosc.io>
Cc: Ondrej Jirman <megous@megous.com>,
devicetree@vger.kernel.org, Samuel Holland <samuel@sholland.org>,
Bhushan Shah <bshah@kde.org>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
Luca Weiss <luca@z3ntu.xyz>, Martijn Braam <martijn@brixit.nl>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 00/13] Add support for PinePhone LCD panel
Date: Fri, 26 Jun 2020 02:55:48 +0200 [thread overview]
Message-ID: <20200626005601.241022-1-megous@megous.com> (raw)
This patchset adds support for the LCD panel of PinePhone.
I've tested this on PinePhone 1.0 and 1.2.
Please take a look.
thank you and regards,
Ondrej Jirman
Changes in v5:
- rewritten on top of rocktech-jh057n00900 driver
- rocktech-jh057n00900 renamed to st7703 (controller name)
- converted rocktech-jh057n00900 bindings to yaml and extended for xbd599
Changes in v4:
- use ->type from the mode instead of hardcoding (Samuel)
- move init_sequence to ->prepare (Samuel)
- move anti-flicker delay to ->enable, explain it (Samuel)
- add enter_sleep after display_off (Samuel)
- drop ->disable (move code to ->unprepare)
- add ID bytes dumping (Linus)
(I can't test it since allwinner DSI driver has a broken
dcs_read function, and I didn't manage to fix it.)
- document magic bytes (Linus)
- assert reset during powerup
- cleanup powerup timings according to the datasheet
Changes in v3:
- Panel driver renamed to the name of the LCD controller
- Re-organize the driver slightly to more easily support more panels
based on the same controller.
- Add patch to enable the touchscreen to complete the LCD support
on PinePhone.
- Dropped the "DSI fix" patch (the driver seems to work for me without it)
- Improved brightness levels handling:
- PinePhone 1.0 uses default levels generated by the driver
- On PinePhone 1.1 duty cycles < 20% lead to black screen, so
default levels can't be used. Martijn Braam came up with a
list of duty cycle values that lead to perception of linear
brigtness level <-> light intensity on PinePhone 1.1
- There was some feedback on v2 about this being similar to st7701.
It's only similar in name. Most of the "user commands" are different,
so I opted to keep this in a new driver instead of creating st770x.
Anyone who likes to check the differences, here are datasheets:
- https://megous.com/dl/tmp/ST7703_DS_v01_20160128.pdf
- https://megous.com/dl/tmp/ST7701.pdf
Changes in v2:
- DT Example fix.
- DT Format fix.
- Raised copyright info to 2020.
- Sort panel operation functions.
- Sort inclusion.
-- For phone owners: --
There's an open question on how to set the backlight brightness values
on post 1.0 revision phone, since lower duty cycles (< 10-20%) lead
to backlight being black. It would be nice if more people can test
the various backlight levels on 1.1 and 1.2 revision with this change
in dts:
brightness-levels = <0 1000>;
num-interpolated-steps = <1000>;
and report at what brightness level the backlight turns on. So far it
seems this has a wide range. Lowest useable duty cycle for me is ~7%
on 1.2 and for Martijn ~20% on 1.1.
Icenowy Zheng (2):
dt-bindings: vendor-prefixes: Add Xingbangda
arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone
Ondrej Jirman (11):
dt-bindings: panel: Convert rocktech,jh057n00900 to yaml
dt-bindings: panel: Add compatible for Xingbangda XBD599 panel
drm/panel: rocktech-jh057n00900: Rename the driver to st7703
drm/panel: st7703: Rename functions from jh057n prefix to st7703
drm/panel: st7703: Prepare for supporting multiple panels
drm/panel: st7703: Move code specific to jh057n closer together
drm/panel: st7703: Move generic part of init sequence to enable
callback
drm/panel: st7703: Add support for Xingbangda XBD599
drm/panel: st7703: Enter sleep after display off
drm/panel: st7703: Assert reset prior to powering down the regulators
arm64: dts: sun50i-a64-pinephone: Add touchscreen support
.../display/panel/rocktech,jh057n00900.txt | 23 -
.../display/panel/rocktech,jh057n00900.yaml | 70 ++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
.../allwinner/sun50i-a64-pinephone-1.1.dts | 19 +
.../dts/allwinner/sun50i-a64-pinephone.dtsi | 54 ++
drivers/gpu/drm/panel/Kconfig | 26 +-
drivers/gpu/drm/panel/Makefile | 2 +-
.../drm/panel/panel-rocktech-jh057n00900.c | 424 ------------
drivers/gpu/drm/panel/panel-sitronix-st7703.c | 655 ++++++++++++++++++
9 files changed, 814 insertions(+), 461 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt
create mode 100644 Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
delete mode 100644 drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c
create mode 100644 drivers/gpu/drm/panel/panel-sitronix-st7703.c
--
2.27.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2020-06-26 7:36 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-26 0:55 Ondrej Jirman [this message]
2020-06-26 0:55 ` [PATCH v5 01/13] dt-bindings: vendor-prefixes: Add Xingbangda Ondrej Jirman
2020-06-26 0:55 ` [PATCH v5 02/13] dt-bindings: panel: Convert rocktech, jh057n00900 to yaml Ondrej Jirman
2020-06-29 22:02 ` Rob Herring
2020-06-26 0:55 ` [PATCH v5 03/13] dt-bindings: panel: Add compatible for Xingbangda XBD599 panel Ondrej Jirman
2020-06-26 0:55 ` [PATCH v5 04/13] drm/panel: rocktech-jh057n00900: Rename the driver to st7703 Ondrej Jirman
2020-07-01 7:47 ` Linus Walleij
2020-06-26 0:55 ` [PATCH v5 05/13] drm/panel: st7703: Rename functions from jh057n prefix " Ondrej Jirman
2020-07-01 7:48 ` Linus Walleij
2020-06-26 0:55 ` [PATCH v5 06/13] drm/panel: st7703: Prepare for supporting multiple panels Ondrej Jirman
2020-07-01 7:48 ` Linus Walleij
2020-06-26 0:55 ` [PATCH v5 07/13] drm/panel: st7703: Move code specific to jh057n closer together Ondrej Jirman
2020-07-01 7:49 ` Linus Walleij
2020-06-26 0:55 ` [PATCH v5 08/13] drm/panel: st7703: Move generic part of init sequence to enable callback Ondrej Jirman
2020-07-01 7:50 ` Linus Walleij
2020-06-26 0:55 ` [PATCH v5 09/13] drm/panel: st7703: Add support for Xingbangda XBD599 Ondrej Jirman
2020-07-01 7:50 ` Linus Walleij
2020-07-01 10:34 ` Ondřej Jirman
2020-06-26 0:55 ` [PATCH v5 10/13] drm/panel: st7703: Enter sleep after display off Ondrej Jirman
2020-07-01 7:51 ` Linus Walleij
2020-06-26 0:55 ` [PATCH v5 11/13] drm/panel: st7703: Assert reset prior to powering down the regulators Ondrej Jirman
2020-07-01 7:51 ` Linus Walleij
2020-06-26 0:56 ` [PATCH v5 12/13] arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone Ondrej Jirman
2020-07-01 7:52 ` Linus Walleij
2020-06-26 0:56 ` [PATCH v5 13/13] arm64: dts: sun50i-a64-pinephone: Add touchscreen support Ondrej Jirman
2020-07-01 7:52 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200626005601.241022-1-megous@megous.com \
--to=megous@megous.com \
--cc=agx@sigxcpu.org \
--cc=airlied@linux.ie \
--cc=bshah@kde.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=icenowy@aosc.io \
--cc=kernel@puri.sm \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=luca@z3ntu.xyz \
--cc=martijn@brixit.nl \
--cc=mripard@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=samuel@sholland.org \
--cc=thierry.reding@gmail.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).