[PATCH v2] drm: pl111: Update documentation

[Linus Walleij <linus.walleij@linaro.org>]

Remove notes about migrating from the old driver which is
retired as all users are now migrated.

Update the text to reflect that we support PL110 and PL111
alike.

Drop the bullet on memory bandwidth scaling: this has been
implemented.

Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- Fix up the documentation rst link as well so we don't
  get build failures in the documentation.
---
 Documentation/gpu/pl111.rst       |  8 ++++----
 drivers/gpu/drm/pl111/pl111_drv.c | 20 +++++---------------
 2 files changed, 9 insertions(+), 19 deletions(-)

diff --git a/Documentation/gpu/pl111.rst b/Documentation/gpu/pl111.rst
index 9b03736d33dd..6d9a1b59a545 100644
--- a/Documentation/gpu/pl111.rst
+++ b/Documentation/gpu/pl111.rst
@@ -1,6 +1,6 @@
-==========================================
- drm/pl111 ARM PrimeCell PL111 CLCD Driver
-==========================================
+====================================================
+ drm/pl111 ARM PrimeCell PL110 and PL111 CLCD Driver
+====================================================
 
 .. kernel-doc:: drivers/gpu/drm/pl111/pl111_drv.c
-   :doc: ARM PrimeCell PL111 CLCD Driver
+   :doc: ARM PrimeCell PL110 and PL111 CLCD Driver
diff --git a/drivers/gpu/drm/pl111/pl111_drv.c b/drivers/gpu/drm/pl111/pl111_drv.c
index 96e58fda75d8..46b0d1c4a16c 100644
--- a/drivers/gpu/drm/pl111/pl111_drv.c
+++ b/drivers/gpu/drm/pl111/pl111_drv.c
@@ -10,18 +10,11 @@
  */
 
 /**
- * DOC: ARM PrimeCell PL111 CLCD Driver
+ * DOC: ARM PrimeCell PL110 and PL111 CLCD Driver
  *
- * The PL111 is a simple LCD controller that can support TFT and STN
- * displays.  This driver exposes a standard KMS interface for them.
- *
- * This driver uses the same Device Tree binding as the fbdev CLCD
- * driver.  While the fbdev driver supports panels that may be
- * connected to the CLCD internally to the CLCD driver, in DRM the
- * panels get split out to drivers/gpu/drm/panels/.  This means that,
- * in converting from using fbdev to using DRM, you also need to write
- * a panel driver (which may be as simple as an entry in
- * panel-simple.c).
+ * The PL110/PL111 is a simple LCD controller that can support TFT
+ * and STN displays. This driver exposes a standard KMS interface
+ * for them.
  *
  * The driver currently doesn't expose the cursor.  The DRM API for
  * cursors requires support for 64x64 ARGB8888 cursor images, while
@@ -29,16 +22,13 @@
  * cursors.  While one could imagine trying to hack something together
  * to look at the ARGB8888 and program reasonable in monochrome, we
  * just don't expose the cursor at all instead, and leave cursor
- * support to the X11 software cursor layer.
+ * support to the application software cursor layer.
  *
  * TODO:
  *
  * - Fix race between setting plane base address and getting IRQ for
  *   vsync firing the pageflip completion.
  *
- * - Use the "max-memory-bandwidth" DT property to filter the
- *   supported formats.
- *
  * - Read back hardware state at boot to skip reprogramming the
  *   hardware when doing a no-op modeset.
  *
-- 
2.26.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel