dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Hans de Goede <hdegoede@redhat.com>
Cc: linux-pwm@vger.kernel.org,
	intel-gfx <intel-gfx@lists.freedesktop.org>,
	"Rafael J . Wysocki" <rjw@rjwysocki.net>,
	linux-acpi@vger.kernel.org,
	"Thierry Reding" <thierry.reding@gmail.com>,
	dri-devel@lists.freedesktop.org,
	"Rodrigo Vivi" <rodrigo.vivi@intel.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Mika Westerberg" <mika.westerberg@linux.intel.com>,
	"Len Brown" <lenb@kernel.org>
Subject: Re: [PATCH v5 10/16] pwm: crc: Enable/disable PWM output on enable/disable
Date: Wed, 29 Jul 2020 13:32:21 +0300	[thread overview]
Message-ID: <20200729103221.GR3703480@smile.fi.intel.com> (raw)
In-Reply-To: <20200717133753.127282-11-hdegoede@redhat.com>

On Fri, Jul 17, 2020 at 03:37:47PM +0200, Hans de Goede wrote:
> The pwm-crc code is using 2 different enable bits:
> 1. bit 7 of the PWM0_CLK_DIV (PWM_OUTPUT_ENABLE)
> 2. bit 0 of the BACKLIGHT_EN register
> 
> So far we've kept the PWM_OUTPUT_ENABLE bit set when disabling the PWM,
> this commit makes crc_pwm_disable() clear it on disable and makes
> crc_pwm_enable() set it again on re-enable.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> Changes in v3:
> - Remove paragraph about tri-stating the output from the commit message,
>   we don't have a datasheet so this was just an unfounded guess
> ---
>  drivers/pwm/pwm-crc.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/pwm/pwm-crc.c b/drivers/pwm/pwm-crc.c
> index 81232da0c767..b72008c9b072 100644
> --- a/drivers/pwm/pwm-crc.c
> +++ b/drivers/pwm/pwm-crc.c
> @@ -54,7 +54,9 @@ static int crc_pwm_calc_clk_div(int period_ns)
>  static int crc_pwm_enable(struct pwm_chip *c, struct pwm_device *pwm)
>  {
>  	struct crystalcove_pwm *crc_pwm = to_crc_pwm(c);
> +	int div = crc_pwm_calc_clk_div(pwm_get_period(pwm));
>  
> +	regmap_write(crc_pwm->regmap, PWM0_CLK_DIV, div | PWM_OUTPUT_ENABLE);
>  	regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 1);
>  
>  	return 0;
> @@ -63,8 +65,10 @@ static int crc_pwm_enable(struct pwm_chip *c, struct pwm_device *pwm)
>  static void crc_pwm_disable(struct pwm_chip *c, struct pwm_device *pwm)
>  {
>  	struct crystalcove_pwm *crc_pwm = to_crc_pwm(c);
> +	int div = crc_pwm_calc_clk_div(pwm_get_period(pwm));
>  
>  	regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 0);
> +	regmap_write(crc_pwm->regmap, PWM0_CLK_DIV, div);
>  }
>  
>  static int crc_pwm_config(struct pwm_chip *c, struct pwm_device *pwm,
> -- 
> 2.26.2
> 

-- 
With Best Regards,
Andy Shevchenko


_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2020-07-30  7:17 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-17 13:37 [PATCH v5 00/16] acpi/pwm/i915: Convert pwm-crc and i915 driver's PWM code to use the atomic PWM API Hans de Goede
2020-07-17 13:37 ` [PATCH v5 01/16] ACPI / LPSS: Resume Cherry Trail PWM controller in no-irq phase Hans de Goede
2020-07-17 13:37 ` [PATCH v5 02/16] ACPI / LPSS: Save Cherry Trail PWM ctx registers only once (at activation) Hans de Goede
2020-07-17 13:37 ` [PATCH v5 03/16] pwm: lpss: Fix off by one error in base_unit math in pwm_lpss_prepare() Hans de Goede
2020-07-17 13:37 ` [PATCH v5 04/16] pwm: lpss: Add range limit check for the base_unit register value Hans de Goede
2020-07-17 13:37 ` [PATCH v5 05/16] pwm: lpss: Add pwm_lpss_prepare_enable() helper Hans de Goede
2020-07-28 18:45   ` Andy Shevchenko
2020-07-28 19:49     ` Hans de Goede
2020-07-17 13:37 ` [PATCH v5 06/16] pwm: lpss: Use pwm_lpss_apply() when restoring state on resume Hans de Goede
2020-07-28 18:57   ` Andy Shevchenko
2020-07-28 19:55     ` Hans de Goede
2020-07-29  8:12       ` Andy Shevchenko
2020-08-02 20:51         ` Hans de Goede
2020-08-03  8:41           ` Andy Shevchenko
2020-07-17 13:37 ` [PATCH v5 07/16] pwm: crc: Fix period / duty_cycle times being off by a factor of 256 Hans de Goede
2020-07-28 19:36   ` Andy Shevchenko
2020-07-28 20:00     ` Hans de Goede
2020-07-29  8:13   ` Andy Shevchenko
2020-07-17 13:37 ` [PATCH v5 08/16] pwm: crc: Fix off-by-one error in the clock-divider calculations Hans de Goede
2020-07-29 10:28   ` Andy Shevchenko
2020-07-17 13:37 ` [PATCH v5 09/16] pwm: crc: Fix period changes not having any effect Hans de Goede
2020-07-29 10:30   ` Andy Shevchenko
2020-07-17 13:37 ` [PATCH v5 10/16] pwm: crc: Enable/disable PWM output on enable/disable Hans de Goede
2020-07-29 10:32   ` Andy Shevchenko [this message]
2020-07-17 13:37 ` [PATCH v5 11/16] pwm: crc: Implement apply() method to support the new atomic PWM API Hans de Goede
2020-07-29 10:51   ` Andy Shevchenko
2020-07-17 13:37 ` [PATCH v5 12/16] pwm: crc: Implement get_state() method Hans de Goede
2020-07-17 13:37 ` [PATCH v5 13/16] drm/i915: panel: Add get_vbt_pwm_freq() helper Hans de Goede
2020-07-17 13:37 ` [PATCH v5 14/16] drm/i915: panel: Honor the VBT PWM frequency for devs with an external PWM controller Hans de Goede
2020-07-17 13:44 ` [PATCH v5 15/16] drm/i915: panel: Honor the VBT PWM min setting " Hans de Goede
2020-07-17 13:44   ` [PATCH v5 16/16] drm/i915: panel: Use atomic PWM API " Hans de Goede
2020-07-27  7:41 ` [PATCH v5 00/16] acpi/pwm/i915: Convert pwm-crc and i915 driver's PWM code to use the atomic PWM API Thierry Reding
2020-07-29  8:23   ` Andy Shevchenko
2020-07-29  9:32     ` Hans de Goede
2020-07-30  9:26       ` Thierry Reding
2020-08-01 14:33         ` Hans de Goede
2020-07-29 10:54 ` Andy Shevchenko
2020-08-01 14:38   ` Hans de Goede
2020-08-02 11:25     ` Andy Shevchenko
2020-08-02 19:43       ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200729103221.GR3703480@smile.fi.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=hdegoede@redhat.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=mika.westerberg@linux.intel.com \
    --cc=rjw@rjwysocki.net \
    --cc=rodrigo.vivi@intel.com \
    --cc=thierry.reding@gmail.com \
    --cc=u.kleine-koenig@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).