dri-devel Archive on lore.kernel.org
 help / color / Atom feed
From: Frank Wunderlich <linux@fw-web.de>
To: linux-mediatek@lists.infradead.org
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>,
	Frank Wunderlich <frank-w@public-files.de>,
	David Airlie <airlied@linux.ie>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	Matthias Brugger <matthias.bgg@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 1/6] dt-bindings: mediatek: add mt7623 display-nodes
Date: Tue,  4 Aug 2020 18:55:49 +0200
Message-ID: <20200804165555.75159-2-linux@fw-web.de> (raw)
In-Reply-To: <20200804165555.75159-1-linux@fw-web.de>

From: Frank Wunderlich <frank-w@public-files.de>

mt7623 uses mt2701/mt8173 for drm, but have own compatibles

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
 .../devicetree/bindings/display/mediatek/mediatek,disp.txt    | 2 +-
 .../devicetree/bindings/display/mediatek/mediatek,dpi.txt     | 2 +-
 .../devicetree/bindings/display/mediatek/mediatek,dsi.txt     | 4 ++--
 .../devicetree/bindings/display/mediatek/mediatek,hdmi.txt    | 4 ++++
 4 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
index b91e709db7a4..121220745d46 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -43,7 +43,7 @@ Required properties (all function blocks):
 	"mediatek,<chip>-dpi"        		- DPI controller, see mediatek,dpi.txt
 	"mediatek,<chip>-disp-mutex" 		- display mutex
 	"mediatek,<chip>-disp-od"    		- overdrive
-  the supported chips are mt2701, mt2712 and mt8173.
+  the supported chips are mt2701, mt7623, mt2712 and mt8173.
 - reg: Physical base address and length of the function block register space
 - interrupts: The interrupt signal from the function block (required, except for
   merge and split function blocks).
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
index 77def4456706..dc1ebd13cc88 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
@@ -7,7 +7,7 @@ output bus.
 
 Required properties:
 - compatible: "mediatek,<chip>-dpi"
-  the supported chips are mt2701 , mt8173 and mt8183.
+  the supported chips are mt2701, mt7623, mt8173 and mt8183.
 - reg: Physical base address and length of the controller's registers
 - interrupts: The interrupt signal from the function block.
 - clocks: device clocks
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
index 8e4729de8c85..f06f24d405a5 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
@@ -7,7 +7,7 @@ channel output.
 
 Required properties:
 - compatible: "mediatek,<chip>-dsi"
-  the supported chips are mt2701, mt8173 and mt8183.
+- the supported chips are mt2701, mt7623, mt8173 and mt8183.
 - reg: Physical base address and length of the controller's registers
 - interrupts: The interrupt signal from the function block.
 - clocks: device clocks
@@ -26,7 +26,7 @@ The MIPI TX configuration module controls the MIPI D-PHY.
 
 Required properties:
 - compatible: "mediatek,<chip>-mipi-tx"
-  the supported chips are mt2701, mt8173 and mt8183.
+- the supported chips are mt2701, 7623, mt8173 and mt8183.
 - reg: Physical base address and length of the controller's registers
 - clocks: PLL reference clock
 - clock-output-names: name of the output clock line to the DSI encoder
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
index 7b124242b0c5..6b1c586403e4 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt
@@ -6,6 +6,7 @@ its parallel input.
 
 Required properties:
 - compatible: Should be "mediatek,<chip>-hdmi".
+- the supported chips are mt2701, mt7623 and mt8173
 - reg: Physical base address and length of the controller's registers
 - interrupts: The interrupt signal from the function block.
 - clocks: device clocks
@@ -32,6 +33,7 @@ The HDMI CEC controller handles hotplug detection and CEC communication.
 
 Required properties:
 - compatible: Should be "mediatek,<chip>-cec"
+- the supported chips are mt7623 and mt8173
 - reg: Physical base address and length of the controller's registers
 - interrupts: The interrupt signal from the function block.
 - clocks: device clock
@@ -44,6 +46,7 @@ The Mediatek's I2C controller is used to interface with I2C devices.
 
 Required properties:
 - compatible: Should be "mediatek,<chip>-hdmi-ddc"
+- the supported chips are mt7623 and mt8173
 - reg: Physical base address and length of the controller's registers
 - clocks: device clock
 - clock-names: Should be "ddc-i2c".
@@ -56,6 +59,7 @@ output and drives the HDMI pads.
 
 Required properties:
 - compatible: "mediatek,<chip>-hdmi-phy"
+- the supported chips are mt2701, mt7623 and mt8173
 - reg: Physical base address and length of the module's registers
 - clocks: PLL reference clock
 - clock-names: must contain "pll_ref"
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply index

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-04 16:55 [PATCH v4 0/6] make hdmi work on bananapi-r2 Frank Wunderlich
2020-08-04 16:55 ` Frank Wunderlich [this message]
2020-08-04 17:18   ` Aw: [PATCH v4 1/6] dt-bindings: mediatek: add mt7623 display-nodes Frank Wunderlich
2020-08-04 17:22     ` Rob Herring
2020-08-04 23:27   ` Chun-Kuang Hu
2020-08-04 16:55 ` [PATCH v4] net: ethernet: mtk_eth_soc: fix MTU warnings Frank Wunderlich
2020-08-04 17:20   ` Aw: " Frank Wunderlich
2020-08-04 16:55 ` [PATCH v4 2/6] drm/mediatek: add ddp routing for mt7623 Frank Wunderlich
2020-08-04 23:01   ` Chun-Kuang Hu
2020-08-04 16:55 ` [PATCH v4 3/6] drm/mediatek: disable tmds on mt2701 Frank Wunderlich
2020-08-04 16:55 ` [PATCH v4 4/6] drm/mediatek: Add get_possible_crtc API for dpi, dsi Frank Wunderlich
2020-08-04 16:55 ` [PATCH v4 5/6] drm/mediatek: dpi/dsi: change the getting possible_crtc way Frank Wunderlich
2020-08-04 16:55 ` [PATCH v4 6/6] arm: dts: mt7623: add display subsystem related device nodes Frank Wunderlich
2020-08-04 17:24   ` David Woodhouse
2020-08-04 17:40     ` Aw: " Frank Wunderlich
2020-08-04 18:02       ` David Woodhouse
2020-08-05  7:27         ` Aw: " Frank Wunderlich
2020-08-05  8:36           ` David Woodhouse
2020-08-05  8:49             ` Aw: " Frank Wunderlich
2020-08-05 11:27               ` David Woodhouse
2020-08-05 11:30                 ` [PATCH 1/3] arm: dts: remove stray /dts-v1/ from mt7623a.dtsi David Woodhouse
2020-08-05 11:30                   ` [PATCH 2/3] arm: dts: mt7623: move MT7623N GPU to separate mt7623n.dtsi file David Woodhouse
2020-08-05 13:01                     ` Aw: " Frank Wunderlich
2020-08-05 11:30                   ` [PATCH 3/3] arm: dts: mt7623: add support for UniElec U7623 eMMC David Woodhouse

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200804165555.75159-2-linux@fw-web.de \
    --to=linux@fw-web.de \
    --cc=airlied@linux.ie \
    --cc=chunkuang.hu@kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=frank-w@public-files.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

dri-devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dri-devel/0 dri-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dri-devel dri-devel/ https://lore.kernel.org/dri-devel \
		dri-devel@lists.freedesktop.org
	public-inbox-index dri-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.dri-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git