[PATCH 4/7] media: sun4i: Remove the MBUS quirks

[Maxime Ripard <maxime@cerno.tech>]

Now that the MBUS quirks are applied by our global notifier, we can
remove them from our CSI driver for the A10.

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 .../platform/sunxi/sun4i-csi/sun4i_csi.c      | 27 -------------------
 1 file changed, 27 deletions(-)

diff --git a/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c b/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c
index eb15c8c725ca..ec46cff80fdb 100644
--- a/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c
+++ b/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c
@@ -167,33 +167,6 @@ static int sun4i_csi_probe(struct platform_device *pdev)
 	if (!csi->traits)
 		return -EINVAL;
 
-	/*
-	 * On Allwinner SoCs, some high memory bandwidth devices do DMA
-	 * directly over the memory bus (called MBUS), instead of the
-	 * system bus. The memory bus has a different addressing scheme
-	 * without the DRAM starting offset.
-	 *
-	 * In some cases this can be described by an interconnect in
-	 * the device tree. In other cases where the hardware is not
-	 * fully understood and the interconnect is left out of the
-	 * device tree, fall back to a default offset.
-	 */
-	if (of_find_property(csi->dev->of_node, "interconnects", NULL)) {
-		ret = of_dma_configure(csi->dev, csi->dev->of_node, true);
-		if (ret)
-			return ret;
-	} else {
-		/*
-		 * XXX(hch): this has no business in a driver and needs to move
-		 * to the device tree.
-		 */
-#ifdef PHYS_PFN_OFFSET
-		ret = dma_direct_set_offset(csi->dev, PHYS_OFFSET, 0, SZ_4G);
-		if (ret)
-			return ret;
-#endif
-	}
-
 	csi->mdev.dev = csi->dev;
 	strscpy(csi->mdev.model, "Allwinner Video Capture Device",
 		sizeof(csi->mdev.model));
-- 
2.28.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel