From: Marc Zyngier <maz@kernel.org>
To: Neil Armstrong <narmstrong@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-amlogic@lists.infradead.org, kernel-team@android.com,
linux-arm-kernel@lists.infradead.org,
Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH 2/4] drm/meson: Unbind all connectors on module removal
Date: Mon, 16 Nov 2020 20:07:42 +0000 [thread overview]
Message-ID: <20201116200744.495826-3-maz@kernel.org> (raw)
In-Reply-To: <20201116200744.495826-1-maz@kernel.org>
Removing the meson DRM module results in the following splats:
[ 42.689228] WARNING: CPU: 0 PID: 572 at drivers/gpu/drm/drm_irq.c:192 drm_irq_uninstall+0x130/0x160 [drm]
[...]
[ 42.812820] Hardware name: , BIOS 2021.01-rc2-00012-gde865f7ee1 11/16/2020
[ 42.819723] pstate: 80400089 (Nzcv daIf +PAN -UAO -TCO BTYPE=--)
[ 42.825737] pc : drm_irq_uninstall+0x130/0x160 [drm]
[ 42.830647] lr : drm_irq_uninstall+0xc4/0x160 [drm]
[...]
[ 42.917614] Call trace:
[ 42.920086] drm_irq_uninstall+0x130/0x160 [drm]
[ 42.924612] meson_drv_unbind+0x68/0xa4 [meson_drm]
[ 42.929436] component_del+0xc0/0x180
[ 42.933058] meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi]
[ 42.938576] platform_drv_remove+0x38/0x60
[ 42.942628] __device_release_driver+0x190/0x23c
[ 42.947198] driver_detach+0xcc/0x160
[ 42.950822] bus_remove_driver+0x68/0xe0
[ 42.954702] driver_unregister+0x3c/0x6c
[ 42.958583] platform_driver_unregister+0x20/0x2c
[ 42.963243] meson_dw_hdmi_platform_driver_exit+0x18/0x4a8 [meson_dw_hdmi]
[ 42.970057] __arm64_sys_delete_module+0x1bc/0x294
[ 42.974801] el0_svc_common.constprop.0+0x80/0x240
[ 42.979542] do_el0_svc+0x30/0xa0
[ 42.982821] el0_svc+0x18/0x50
[ 42.985839] el0_sync_handler+0x198/0x404
[ 42.989806] el0_sync+0x158/0x180
immediatelly followed by
[ 43.002296] WARNING: CPU: 0 PID: 572 at drivers/gpu/drm/drm_mode_config.c:504 drm_mode_config_cleanup+0x2a8/0x304 [drm]
[...]
[ 43.128150] Hardware name: , BIOS 2021.01-rc2-00012-gde865f7ee1 11/16/2020
[ 43.135052] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--)
[ 43.141062] pc : drm_mode_config_cleanup+0x2a8/0x304 [drm]
[ 43.146492] lr : drm_mode_config_cleanup+0xac/0x304 [drm]
[...]
[ 43.233979] Call trace:
[ 43.236451] drm_mode_config_cleanup+0x2a8/0x304 [drm]
[ 43.241538] drm_mode_config_init_release+0x1c/0x2c [drm]
[ 43.246886] drm_managed_release+0xa8/0x120 [drm]
[ 43.251543] drm_dev_put+0x94/0xc0 [drm]
[ 43.255380] meson_drv_unbind+0x78/0xa4 [meson_drm]
[ 43.260204] component_del+0xc0/0x180
[ 43.263829] meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi]
[ 43.269344] platform_drv_remove+0x38/0x60
[ 43.273398] __device_release_driver+0x190/0x23c
[ 43.277967] driver_detach+0xcc/0x160
[ 43.281590] bus_remove_driver+0x68/0xe0
[ 43.285471] driver_unregister+0x3c/0x6c
[ 43.289352] platform_driver_unregister+0x20/0x2c
[ 43.294011] meson_dw_hdmi_platform_driver_exit+0x18/0x4a8 [meson_dw_hdmi]
[ 43.300826] __arm64_sys_delete_module+0x1bc/0x294
[ 43.305570] el0_svc_common.constprop.0+0x80/0x240
[ 43.310312] do_el0_svc+0x30/0xa0
[ 43.313590] el0_svc+0x18/0x50
[ 43.316608] el0_sync_handler+0x198/0x404
[ 43.320574] el0_sync+0x158/0x180
[ 43.323852] ---[ end trace d796a3072dab01da ]---
[ 43.328561] [drm:drm_mode_config_cleanup [drm]] *ERROR* connector HDMI-A-1 leaked!
both triggered by the fact that the HDMI subsystem is still active,
and the DRM removal doesn't result in the connectors being torn down.
Call drm_atomic_helper_shutdown() and component_unbind_all() to safely
tear the module down.
Signed-off-by: Marc Zyngier <maz@kernel.org>
---
drivers/gpu/drm/meson/meson_drv.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
index 324fa489f1c4..3d1de9cbb1c8 100644
--- a/drivers/gpu/drm/meson/meson_drv.c
+++ b/drivers/gpu/drm/meson/meson_drv.c
@@ -390,8 +390,10 @@ static void meson_drv_unbind(struct device *dev)
}
drm_dev_unregister(drm);
- drm_irq_uninstall(drm);
drm_kms_helper_poll_fini(drm);
+ drm_atomic_helper_shutdown(drm);
+ component_unbind_all(dev, drm);
+ drm_irq_uninstall(drm);
drm_dev_put(drm);
if (priv->afbcd.ops) {
--
2.28.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-11-16 20:08 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-16 20:07 [PATCH 0/4] drm/meson: Module removal fixes Marc Zyngier
2020-11-16 20:07 ` [PATCH 1/4] drm/meson: Free RDMA resources after tearing down DRM Marc Zyngier
2020-11-17 8:51 ` Neil Armstrong
2020-11-16 20:07 ` Marc Zyngier [this message]
2020-11-17 8:53 ` [PATCH 2/4] drm/meson: Unbind all connectors on module removal Neil Armstrong
2020-11-16 20:07 ` [PATCH 3/4] drm/meson: dw-hdmi: Register a callback to disable the regulator Marc Zyngier
2020-11-17 8:55 ` Neil Armstrong
2020-11-16 20:07 ` [PATCH 4/4] drm/meson: dw-hdmi: Ensure that clocks are enabled before touching the TOP registers Marc Zyngier
2020-11-17 8:56 ` Neil Armstrong
2020-11-17 8:49 ` [PATCH 0/4] drm/meson: Module removal fixes Neil Armstrong
2020-11-17 9:19 ` Marc Zyngier
2020-11-17 9:46 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201116200744.495826-3-maz@kernel.org \
--to=maz@kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jbrunet@baylibre.com \
--cc=kernel-team@android.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=narmstrong@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).