dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: Eric Anholt <eric@anholt.net>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Maxime Ripard <maxime@cerno.tech>,
	Daniel Vetter <daniel.vetter@intel.com>,
	David Airlie <airlied@linux.ie>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-rpi-kernel@lists.infradead.org,
	Hans Verkuil <hverkuil-cisco@xs4all.nl>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-media@vger.kernel.org
Subject: [PATCH v2 10/15] drm/vc4: hdmi: Support BCM2711 CEC interrupt setup
Date: Mon, 11 Jan 2021 15:23:04 +0100	[thread overview]
Message-ID: <20210111142309.193441-11-maxime@cerno.tech> (raw)
In-Reply-To: <20210111142309.193441-1-maxime@cerno.tech>

The HDMI controller found in the BCM2711 has an external interrupt
controller for the CEC and hotplug interrupt shared between the two
instances.

Let's add a variant flag to register a single interrupt handler and
deals with the interrupt handler setup, or two interrupt handlers
relying on an external irqchip.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 42 ++++++++++++++++++++++++++--------
 drivers/gpu/drm/vc4/vc4_hdmi.h |  7 ++++++
 2 files changed, 39 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 12ca5f3084af..d116ecfd8cf7 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1605,9 +1605,11 @@ static int vc4_hdmi_cec_adap_enable(struct cec_adapter *adap, bool enable)
 			   ((3600 / usecs) << VC4_HDMI_CEC_CNT_TO_3600_US_SHIFT) |
 			   ((3500 / usecs) << VC4_HDMI_CEC_CNT_TO_3500_US_SHIFT));
 
-		HDMI_WRITE(HDMI_CEC_CPU_MASK_CLEAR, VC4_HDMI_CPU_CEC);
+		if (!vc4_hdmi->variant->external_irq_controller)
+			HDMI_WRITE(HDMI_CEC_CPU_MASK_CLEAR, VC4_HDMI_CPU_CEC);
 	} else {
-		HDMI_WRITE(HDMI_CEC_CPU_MASK_SET, VC4_HDMI_CPU_CEC);
+		if (!vc4_hdmi->variant->external_irq_controller)
+			HDMI_WRITE(HDMI_CEC_CPU_MASK_SET, VC4_HDMI_CPU_CEC);
 		HDMI_WRITE(HDMI_CEC_CNTRL_5, val |
 			   VC4_HDMI_CEC_TX_SW_RESET | VC4_HDMI_CEC_RX_SW_RESET);
 	}
@@ -1682,8 +1684,6 @@ static int vc4_hdmi_cec_init(struct vc4_hdmi *vc4_hdmi)
 	cec_fill_conn_info_from_drm(&conn_info, &vc4_hdmi->connector);
 	cec_s_conn_info(vc4_hdmi->cec_adap, &conn_info);
 
-	HDMI_WRITE(HDMI_CEC_CPU_MASK_SET, 0xffffffff);
-
 	value = HDMI_READ(HDMI_CEC_CNTRL_1);
 	/* Set the logical address to Unregistered */
 	value |= VC4_HDMI_CEC_ADDR_MASK;
@@ -1691,12 +1691,32 @@ static int vc4_hdmi_cec_init(struct vc4_hdmi *vc4_hdmi)
 
 	vc4_hdmi_cec_update_clk_div(vc4_hdmi);
 
-	ret = devm_request_threaded_irq(&pdev->dev, platform_get_irq(pdev, 0),
-					vc4_cec_irq_handler,
-					vc4_cec_irq_handler_thread, 0,
-					"vc4 hdmi cec", vc4_hdmi);
-	if (ret)
-		goto err_delete_cec_adap;
+	if (vc4_hdmi->variant->external_irq_controller) {
+		ret = devm_request_threaded_irq(&pdev->dev,
+						platform_get_irq_byname(pdev, "cec-rx"),
+						vc4_cec_irq_handler_rx_bare,
+						vc4_cec_irq_handler_rx_thread, 0,
+						"vc4 hdmi cec rx", vc4_hdmi);
+		if (ret)
+			goto err_delete_cec_adap;
+
+		ret = devm_request_threaded_irq(&pdev->dev,
+						platform_get_irq_byname(pdev, "cec-tx"),
+						vc4_cec_irq_handler_tx_bare,
+						vc4_cec_irq_handler_tx_thread, 0,
+						"vc4 hdmi cec tx", vc4_hdmi);
+		if (ret)
+			goto err_delete_cec_adap;
+	} else {
+		HDMI_WRITE(HDMI_CEC_CPU_MASK_SET, 0xffffffff);
+
+		ret = devm_request_threaded_irq(&pdev->dev, platform_get_irq(pdev, 0),
+						vc4_cec_irq_handler,
+						vc4_cec_irq_handler_thread, 0,
+						"vc4 hdmi cec", vc4_hdmi);
+		if (ret)
+			goto err_delete_cec_adap;
+	}
 
 	ret = cec_register_adapter(vc4_hdmi->cec_adap, &pdev->dev);
 	if (ret < 0)
@@ -2095,6 +2115,7 @@ static const struct vc4_hdmi_variant bcm2711_hdmi0_variant = {
 		PHY_LANE_CK,
 	},
 	.unsupported_odd_h_timings	= true,
+	.external_irq_controller	= true,
 
 	.init_resources		= vc5_hdmi_init_resources,
 	.csc_setup		= vc5_hdmi_csc_setup,
@@ -2121,6 +2142,7 @@ static const struct vc4_hdmi_variant bcm2711_hdmi1_variant = {
 		PHY_LANE_2,
 	},
 	.unsupported_odd_h_timings	= true,
+	.external_irq_controller	= true,
 
 	.init_resources		= vc5_hdmi_init_resources,
 	.csc_setup		= vc5_hdmi_csc_setup,
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 6966db1a0957..d71f6ed321bf 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -64,6 +64,13 @@ struct vc4_hdmi_variant {
 	/* The BCM2711 cannot deal with odd horizontal pixel timings */
 	bool unsupported_odd_h_timings;
 
+	/*
+	 * The BCM2711 CEC/hotplug IRQ controller is shared between the
+	 * two HDMI controllers, and we have a proper irqchip driver for
+	 * it.
+	 */
+	bool external_irq_controller;
+
 	/* Callback to get the resources (memory region, interrupts,
 	 * clocks, etc) for that variant.
 	 */
-- 
2.29.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2021-01-12  7:57 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-11 14:22 [PATCH v2 00/15] drm/vc4: hdmi: Add CEC support for the BCM2711 Maxime Ripard
2021-01-11 14:22 ` [PATCH v2 01/15] ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835 Maxime Ripard
2021-01-11 16:54   ` Florian Fainelli
2021-01-11 17:12     ` Nicolas Saenz Julienne
2021-01-11 14:22 ` [PATCH v2 02/15] drm/vc4: hdmi: Move hdmi reset to bind Maxime Ripard
2021-01-11 14:22 ` [PATCH v2 03/15] drm/vc4: hdmi: Fix register offset with longer CEC messages Maxime Ripard
2021-01-11 14:22 ` [PATCH v2 04/15] drm/vc4: hdmi: Fix up CEC registers Maxime Ripard
2021-01-11 14:22 ` [PATCH v2 05/15] drm/vc4: hdmi: Restore cec physical address on reconnect Maxime Ripard
2021-01-22 10:31   ` Dave Stevenson
2021-01-11 14:23 ` [PATCH v2 06/15] drm/vc4: hdmi: Compute the CEC clock divider from the clock rate Maxime Ripard
2021-01-11 14:23 ` [PATCH v2 07/15] drm/vc4: hdmi: Update the CEC clock divider on HSM rate change Maxime Ripard
2021-01-11 14:23 ` [PATCH v2 08/15] drm/vc4: hdmi: Introduce a CEC clock Maxime Ripard
2021-01-11 14:23 ` [PATCH v2 09/15] drm/vc4: hdmi: Split the interrupt handlers Maxime Ripard
2021-01-22 13:01   ` Dave Stevenson
2021-01-11 14:23 ` Maxime Ripard [this message]
2021-01-22 13:10   ` [PATCH v2 10/15] drm/vc4: hdmi: Support BCM2711 CEC interrupt setup Dave Stevenson
2021-01-11 14:23 ` [PATCH v2 11/15] drm/vc4: hdmi: Remove cec_available flag Maxime Ripard
2021-01-11 14:23 ` [PATCH v2 12/15] drm/vc4: hdmi: Don't register the CEC adapter if there's no interrupts Maxime Ripard
2021-01-11 14:23 ` [PATCH v2 13/15] dt-binding: display: bcm2711-hdmi: Add CEC and hotplug interrupts Maxime Ripard
2021-01-22 13:28   ` Dave Stevenson
2021-02-01 18:56   ` Rob Herring
2021-02-18 14:54     ` Rob Herring
2021-01-11 14:23 ` [PATCH v2 14/15] ARM: dts: bcm2711: Add the BSC interrupt controller Maxime Ripard
2021-02-09  9:49   ` Dave Stevenson
2021-02-10 14:40     ` Maxime Ripard
2021-02-10 15:30       ` Marc Zyngier
2021-02-10 15:49         ` Dave Stevenson
2021-02-10 18:49           ` Florian Fainelli
2021-02-12 11:20             ` Nicolas Saenz Julienne
2021-02-12 11:34               ` Maxime Ripard
2021-01-11 14:23 ` [PATCH v2 15/15] ARM: dts: bcm2711: Add the CEC " Maxime Ripard
2021-01-28 14:51   ` Nicolas Saenz Julienne
2021-01-12 15:24 ` [PATCH v2 00/15] drm/vc4: hdmi: Add CEC support for the BCM2711 Hans Verkuil
2021-01-18 13:55   ` Hans Verkuil
2021-01-27 15:28     ` Hans Verkuil
2021-01-25 21:03 ` Nicolas Saenz Julienne
2021-01-28  9:48   ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210111142309.193441-11-maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=airlied@linux.ie \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=daniel.vetter@intel.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=eric@anholt.net \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mchehab@kernel.org \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).