dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Jordan Crouse <jcrouse@codeaurora.org>
To: Akhil P Oommen <akhilpo@codeaurora.org>
Cc: devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org, mka@chromium.org,
	dri-devel@freedesktop.org, freedreno@lists.freedesktop.org
Subject: Re: [PATCH v4 1/2] drm/msm: Add speed-bin support to a618 gpu
Date: Mon, 11 Jan 2021 09:49:39 -0700	[thread overview]
Message-ID: <20210111164939.GC29638@jcrouse1-lnx.qualcomm.com> (raw)
In-Reply-To: <1610129731-4875-1-git-send-email-akhilpo@codeaurora.org>

On Fri, Jan 08, 2021 at 11:45:30PM +0530, Akhil P Oommen wrote:
> Some GPUs support different max frequencies depending on the platform.
> To identify the correct variant, we should check the gpu speedbin
> fuse value. Add support for this speedbin detection to a6xx family
> along with the required fuse details for a618 gpu.

Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>

> Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
> ---
> Changes from v2:
> 	1. Made the changes a6xx specific to save space.
> Changes from v1:
> 	1. Added the changes to support a618 sku to the series.
> 	2. Avoid failing probe in case of an unsupported sku. (Rob)
> Changes from v3:
> 	1. Replace a618_speedbins[] with a function. (Jordan)
> 
>  drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 83 +++++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/msm/adreno/a6xx_gpu.h |  2 +
>  2 files changed, 85 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> index 1306618..499d134 100644
> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> @@ -10,6 +10,7 @@
>  
>  #include <linux/bitfield.h>
>  #include <linux/devfreq.h>
> +#include <linux/nvmem-consumer.h>
>  #include <linux/soc/qcom/llcc-qcom.h>
>  
>  #define GPU_PAS_ID 13
> @@ -1208,6 +1209,10 @@ static void a6xx_destroy(struct msm_gpu *gpu)
>  	a6xx_gmu_remove(a6xx_gpu);
>  
>  	adreno_gpu_cleanup(adreno_gpu);
> +
> +	if (a6xx_gpu->opp_table)
> +		dev_pm_opp_put_supported_hw(a6xx_gpu->opp_table);
> +
>  	kfree(a6xx_gpu);
>  }
>  
> @@ -1264,6 +1269,78 @@ static uint32_t a6xx_get_rptr(struct msm_gpu *gpu, struct msm_ringbuffer *ring)
>  	return ring->memptrs->rptr = gpu_read(gpu, REG_A6XX_CP_RB_RPTR);
>  }
>  
> +static u32 a618_get_speed_bin(u32 fuse)
> +{
> +	if (fuse == 0)
> +		return 0;
> +	else if (fuse == 169)
> +		return 1;
> +	else if (fuse == 174)
> +		return 2;
> +
> +	return UINT_MAX;
> +}
> +
> +static u32 fuse_to_supp_hw(struct device *dev, u32 revn, u32 fuse)
> +{
> +	u32 val = UINT_MAX;
> +
> +	if (revn == 618)
> +		val = a618_get_speed_bin(fuse);
> +
> +	if (val == UINT_MAX) {
> +		DRM_DEV_ERROR(dev,
> +			"missing support for speed-bin: %u. Some OPPs may not be supported by hardware",
> +			fuse);
> +		return UINT_MAX;
> +	}
> +
> +	return (1 << val);
> +}
> +
> +static int a6xx_set_supported_hw(struct device *dev, struct a6xx_gpu *a6xx_gpu,
> +		u32 revn)
> +{
> +	struct opp_table *opp_table;
> +	struct nvmem_cell *cell;
> +	u32 supp_hw = UINT_MAX;
> +	void *buf;
> +
> +	cell = nvmem_cell_get(dev, "speed_bin");
> +	/*
> +	 * -ENOENT means that the platform doesn't support speedbin which is
> +	 * fine
> +	 */
> +	if (PTR_ERR(cell) == -ENOENT)
> +		return 0;
> +	else if (IS_ERR(cell)) {
> +		DRM_DEV_ERROR(dev,
> +				"failed to read speed-bin. Some OPPs may not be supported by hardware");
> +		goto done;
> +	}
> +
> +	buf = nvmem_cell_read(cell, NULL);
> +	if (IS_ERR(buf)) {
> +		nvmem_cell_put(cell);
> +		DRM_DEV_ERROR(dev,
> +				"failed to read speed-bin. Some OPPs may not be supported by hardware");
> +		goto done;
> +	}
> +
> +	supp_hw = fuse_to_supp_hw(dev, revn, *((u32 *) buf));
> +
> +	kfree(buf);
> +	nvmem_cell_put(cell);
> +
> +done:
> +	opp_table = dev_pm_opp_set_supported_hw(dev, &supp_hw, 1);
> +	if (IS_ERR(opp_table))
> +		return PTR_ERR(opp_table);
> +
> +	a6xx_gpu->opp_table = opp_table;
> +	return 0;
> +}
> +
>  static const struct adreno_gpu_funcs funcs = {
>  	.base = {
>  		.get_param = adreno_get_param,
> @@ -1325,6 +1402,12 @@ struct msm_gpu *a6xx_gpu_init(struct drm_device *dev)
>  
>  	a6xx_llc_slices_init(pdev, a6xx_gpu);
>  
> +	ret = a6xx_set_supported_hw(&pdev->dev, a6xx_gpu, info->revn);
> +	if (ret) {
> +		a6xx_destroy(&(a6xx_gpu->base.base));
> +		return ERR_PTR(ret);
> +	}
> +
>  	ret = adreno_gpu_init(dev, pdev, adreno_gpu, &funcs, 1);
>  	if (ret) {
>  		a6xx_destroy(&(a6xx_gpu->base.base));
> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.h b/drivers/gpu/drm/msm/adreno/a6xx_gpu.h
> index e793d32..ce0610c 100644
> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.h
> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.h
> @@ -33,6 +33,8 @@ struct a6xx_gpu {
>  	void *llc_slice;
>  	void *htw_llc_slice;
>  	bool have_mmu500;
> +
> +	struct opp_table *opp_table;
>  };
>  
>  #define to_a6xx_gpu(x) container_of(x, struct a6xx_gpu, base)
> -- 
> 2.7.4
> 

-- 
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

      parent reply	other threads:[~2021-01-11 16:50 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-08 18:15 [PATCH v4 1/2] drm/msm: Add speed-bin support to a618 gpu Akhil P Oommen
2021-01-08 18:15 ` [PATCH v4 2/2] arm: dts: sc7180: Add support for gpu fuse Akhil P Oommen
2021-02-02 22:52   ` Bjorn Andersson
2021-02-03 17:54     ` Akhil P Oommen
2021-01-11 16:49 ` Jordan Crouse [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210111164939.GC29638@jcrouse1-lnx.qualcomm.com \
    --to=jcrouse@codeaurora.org \
    --cc=akhilpo@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mka@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).