* [PATCH v3 1/2] dt-bindings: drm/bridge: anx7625: Add power supplies @ 2021-01-15 7:02 Hsin-Yi Wang 2021-01-15 7:02 ` [PATCH v3 2/2] drm/bridge: anx7625: disable regulators when power off Hsin-Yi Wang 0 siblings, 1 reply; 3+ messages in thread From: Hsin-Yi Wang @ 2021-01-15 7:02 UTC (permalink / raw) To: Xin Ji, David Airlie Cc: devicetree, Jernej Skrabec, Neil Armstrong, Jonas Karlman, linux-kernel, dri-devel, Andrzej Hajda, Rob Herring, Laurent Pinchart, Hsin-Yi Wang, Sam Ravnborg anx7625 requires 3 power supply regulators. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> --- .../bindings/display/bridge/analogix,anx7625.yaml | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml index 60585a4fc22b..3ae97d9523e5 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -34,6 +34,15 @@ properties: description: used for reset chip control, RESET_N pin B7. maxItems: 1 + vdd10-supply: + description: Regulator that provides the supply 1.0V power. + + vdd18-supply: + description: Regulator that provides the supply 1.8V power. + + vdd33-supply: + description: Regulator that provides the supply 3.3V power. + ports: type: object @@ -55,6 +64,9 @@ properties: required: - compatible - reg + - vdd10-supply + - vdd18-supply + - vdd33-supply - ports additionalProperties: false @@ -72,6 +84,9 @@ examples: reg = <0x58>; enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&pp1000_mipibrdg>; + vdd18-supply = <&pp1800_mipibrdg>; + vdd33-supply = <&pp3300_mipibrdg>; ports { #address-cells = <1>; -- 2.30.0.284.gd98b1dd5eaa7-goog _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH v3 2/2] drm/bridge: anx7625: disable regulators when power off 2021-01-15 7:02 [PATCH v3 1/2] dt-bindings: drm/bridge: anx7625: Add power supplies Hsin-Yi Wang @ 2021-01-15 7:02 ` Hsin-Yi Wang 2021-02-23 15:23 ` Robert Foss 0 siblings, 1 reply; 3+ messages in thread From: Hsin-Yi Wang @ 2021-01-15 7:02 UTC (permalink / raw) To: Xin Ji, David Airlie Cc: devicetree, Jernej Skrabec, Neil Armstrong, Jonas Karlman, linux-kernel, dri-devel, Andrzej Hajda, Rob Herring, Laurent Pinchart, Hsin-Yi Wang, Sam Ravnborg When suspending the driver, anx7625_power_standby() will be called to turn off reset-gpios and enable-gpios. However, power supplies are not disabled. To save power, the driver can get the power supply regulators and turn off them in anx7625_power_standby(). Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> --- Change: v3: add delays between regulators power on --- drivers/gpu/drm/bridge/analogix/anx7625.c | 34 +++++++++++++++++++++++ drivers/gpu/drm/bridge/analogix/anx7625.h | 1 + 2 files changed, 35 insertions(+) diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c index 65cc05982f82..23283ba0c4f9 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.c +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/mutex.h> +#include <linux/regulator/consumer.h> #include <linux/slab.h> #include <linux/types.h> #include <linux/workqueue.h> @@ -875,12 +876,25 @@ static int sp_tx_edid_read(struct anx7625_data *ctx, static void anx7625_power_on(struct anx7625_data *ctx) { struct device *dev = &ctx->client->dev; + int ret, i; if (!ctx->pdata.low_power_mode) { DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n"); return; } + for (i = 0; i < ARRAY_SIZE(ctx->pdata.supplies); i++) { + ret = regulator_enable(ctx->pdata.supplies[i].consumer); + if (ret < 0) { + DRM_DEV_DEBUG_DRIVER(dev, "cannot enable supply %d: %d\n", + i, ret); + goto reg_err; + } + usleep_range(2000, 2100); + } + + usleep_range(4000, 4100); + /* Power on pin enable */ gpiod_set_value(ctx->pdata.gpio_p_on, 1); usleep_range(10000, 11000); @@ -889,11 +903,16 @@ static void anx7625_power_on(struct anx7625_data *ctx) usleep_range(10000, 11000); DRM_DEV_DEBUG_DRIVER(dev, "power on !\n"); + return; +reg_err: + for (--i; i >= 0; i--) + regulator_disable(ctx->pdata.supplies[i].consumer); } static void anx7625_power_standby(struct anx7625_data *ctx) { struct device *dev = &ctx->client->dev; + int ret; if (!ctx->pdata.low_power_mode) { DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n"); @@ -904,6 +923,12 @@ static void anx7625_power_standby(struct anx7625_data *ctx) usleep_range(1000, 1100); gpiod_set_value(ctx->pdata.gpio_p_on, 0); usleep_range(1000, 1100); + + ret = regulator_bulk_disable(ARRAY_SIZE(ctx->pdata.supplies), + ctx->pdata.supplies); + if (ret < 0) + DRM_DEV_DEBUG_DRIVER(dev, "cannot disable supplies %d\n", ret); + DRM_DEV_DEBUG_DRIVER(dev, "power down\n"); } @@ -1742,6 +1767,15 @@ static int anx7625_i2c_probe(struct i2c_client *client, platform->client = client; i2c_set_clientdata(client, platform); + pdata->supplies[0].supply = "vdd10"; + pdata->supplies[1].supply = "vdd18"; + pdata->supplies[2].supply = "vdd33"; + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(pdata->supplies), + pdata->supplies); + if (ret) { + DRM_DEV_ERROR(dev, "fail to get power supplies: %d\n", ret); + return ret; + } anx7625_init_gpio(platform); atomic_set(&platform->power_status, 0); diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h index 193ad86c5450..e4a086b3a3d7 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.h +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h @@ -350,6 +350,7 @@ struct s_edid_data { struct anx7625_platform_data { struct gpio_desc *gpio_p_on; struct gpio_desc *gpio_reset; + struct regulator_bulk_data supplies[3]; struct drm_bridge *panel_bridge; int intp_irq; u32 low_power_mode; -- 2.30.0.284.gd98b1dd5eaa7-goog _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v3 2/2] drm/bridge: anx7625: disable regulators when power off 2021-01-15 7:02 ` [PATCH v3 2/2] drm/bridge: anx7625: disable regulators when power off Hsin-Yi Wang @ 2021-02-23 15:23 ` Robert Foss 0 siblings, 0 replies; 3+ messages in thread From: Robert Foss @ 2021-02-23 15:23 UTC (permalink / raw) To: Hsin-Yi Wang Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, Jernej Skrabec, Neil Armstrong, David Airlie, Jonas Karlman, linux-kernel, dri-devel, Andrzej Hajda, Rob Herring, Laurent Pinchart, Sam Ravnborg, Xin Ji Hey Hsin-Yi, This patch looks good to me, feel free to add my r-b. Reviewed-by: Robert Foss <robert.foss@linaro.org> On Fri, 15 Jan 2021 at 08:05, Hsin-Yi Wang <hsinyi@chromium.org> wrote: > > When suspending the driver, anx7625_power_standby() will be called to > turn off reset-gpios and enable-gpios. However, power supplies are not > disabled. To save power, the driver can get the power supply regulators > and turn off them in anx7625_power_standby(). > > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> > --- > Change: > v3: add delays between regulators power on > --- > drivers/gpu/drm/bridge/analogix/anx7625.c | 34 +++++++++++++++++++++++ > drivers/gpu/drm/bridge/analogix/anx7625.h | 1 + > 2 files changed, 35 insertions(+) > > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c > index 65cc05982f82..23283ba0c4f9 100644 > --- a/drivers/gpu/drm/bridge/analogix/anx7625.c > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c > @@ -11,6 +11,7 @@ > #include <linux/kernel.h> > #include <linux/module.h> > #include <linux/mutex.h> > +#include <linux/regulator/consumer.h> > #include <linux/slab.h> > #include <linux/types.h> > #include <linux/workqueue.h> > @@ -875,12 +876,25 @@ static int sp_tx_edid_read(struct anx7625_data *ctx, > static void anx7625_power_on(struct anx7625_data *ctx) > { > struct device *dev = &ctx->client->dev; > + int ret, i; > > if (!ctx->pdata.low_power_mode) { > DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n"); > return; > } > > + for (i = 0; i < ARRAY_SIZE(ctx->pdata.supplies); i++) { > + ret = regulator_enable(ctx->pdata.supplies[i].consumer); > + if (ret < 0) { > + DRM_DEV_DEBUG_DRIVER(dev, "cannot enable supply %d: %d\n", > + i, ret); > + goto reg_err; > + } > + usleep_range(2000, 2100); > + } > + > + usleep_range(4000, 4100); > + > /* Power on pin enable */ > gpiod_set_value(ctx->pdata.gpio_p_on, 1); > usleep_range(10000, 11000); > @@ -889,11 +903,16 @@ static void anx7625_power_on(struct anx7625_data *ctx) > usleep_range(10000, 11000); > > DRM_DEV_DEBUG_DRIVER(dev, "power on !\n"); > + return; > +reg_err: > + for (--i; i >= 0; i--) > + regulator_disable(ctx->pdata.supplies[i].consumer); > } > > static void anx7625_power_standby(struct anx7625_data *ctx) > { > struct device *dev = &ctx->client->dev; > + int ret; > > if (!ctx->pdata.low_power_mode) { > DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n"); > @@ -904,6 +923,12 @@ static void anx7625_power_standby(struct anx7625_data *ctx) > usleep_range(1000, 1100); > gpiod_set_value(ctx->pdata.gpio_p_on, 0); > usleep_range(1000, 1100); > + > + ret = regulator_bulk_disable(ARRAY_SIZE(ctx->pdata.supplies), > + ctx->pdata.supplies); > + if (ret < 0) > + DRM_DEV_DEBUG_DRIVER(dev, "cannot disable supplies %d\n", ret); > + > DRM_DEV_DEBUG_DRIVER(dev, "power down\n"); > } > > @@ -1742,6 +1767,15 @@ static int anx7625_i2c_probe(struct i2c_client *client, > platform->client = client; > i2c_set_clientdata(client, platform); > > + pdata->supplies[0].supply = "vdd10"; > + pdata->supplies[1].supply = "vdd18"; > + pdata->supplies[2].supply = "vdd33"; > + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(pdata->supplies), > + pdata->supplies); > + if (ret) { > + DRM_DEV_ERROR(dev, "fail to get power supplies: %d\n", ret); > + return ret; > + } > anx7625_init_gpio(platform); > > atomic_set(&platform->power_status, 0); > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h > index 193ad86c5450..e4a086b3a3d7 100644 > --- a/drivers/gpu/drm/bridge/analogix/anx7625.h > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h > @@ -350,6 +350,7 @@ struct s_edid_data { > struct anx7625_platform_data { > struct gpio_desc *gpio_p_on; > struct gpio_desc *gpio_reset; > + struct regulator_bulk_data supplies[3]; > struct drm_bridge *panel_bridge; > int intp_irq; > u32 low_power_mode; > -- > 2.30.0.284.gd98b1dd5eaa7-goog > _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-02-23 15:23 UTC | newest] Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-01-15 7:02 [PATCH v3 1/2] dt-bindings: drm/bridge: anx7625: Add power supplies Hsin-Yi Wang 2021-01-15 7:02 ` [PATCH v3 2/2] drm/bridge: anx7625: disable regulators when power off Hsin-Yi Wang 2021-02-23 15:23 ` Robert Foss
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).