dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Pekka Paalanen <ppaalanen@gmail.com>
To: Melissa Wen <melissa.srw@gmail.com>
Cc: David Airlie <airlied@linux.ie>,
	Haneen Mohammed <hamohammed.sa@gmail.com>,
	Sumera Priyadarsini <sylphrenadin@gmail.com>,
	Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>,
	dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v4 4/4] drm/vkms: add overlay support
Date: Mon, 26 Apr 2021 11:07:04 +0300	[thread overview]
Message-ID: <20210426110704.7cde8c1a@eldfell> (raw)
In-Reply-To: <8261bf93d8a0e3ffaf81d8e7c9b3e9c229116be3.1619250933.git.melissa.srw@gmail.com>


[-- Attachment #1.1: Type: text/plain, Size: 7994 bytes --]

On Sat, 24 Apr 2021 05:26:10 -0300
Melissa Wen <melissa.srw@gmail.com> wrote:

> Add support to overlay plane, in addition to primary and cursor
> planes. In this approach, the plane composition still requires an
> active primary plane and planes are composed associatively in the
> order: (primary <- overlay) <- cursor
> 
> It enables to run the following IGT tests successfully:
> - kms_plane_cursor:
>   - pipe-A-[overlay, primary, viewport]-size-[64, 128, 256]
> - kms_atomic:
>   - plane-overlay-legacy
> and preserves the successful execution of kms_cursor_crc,
> kms_writeback and kms_flip
> 
> Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Hi,

just curious, when you need to compute a CRC without having a writeback
connector output, where do you write the blended result in order to
compute CRC?


Thanks,
pq

> ---
>  drivers/gpu/drm/vkms/vkms_composer.c | 27 +++++++++++++++++----------
>  drivers/gpu/drm/vkms/vkms_drv.c      |  5 +++++
>  drivers/gpu/drm/vkms/vkms_drv.h      |  1 +
>  drivers/gpu/drm/vkms/vkms_output.c   | 11 ++++++++++-
>  drivers/gpu/drm/vkms/vkms_plane.c    | 15 ++++++++++++---
>  5 files changed, 45 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/gpu/drm/vkms/vkms_composer.c b/drivers/gpu/drm/vkms/vkms_composer.c
> index 7e01bc39d2a1..1b510f3dbcbf 100644
> --- a/drivers/gpu/drm/vkms/vkms_composer.c
> +++ b/drivers/gpu/drm/vkms/vkms_composer.c
> @@ -176,11 +176,12 @@ static void compose_plane(struct vkms_composer *primary_composer,
>  
>  static int compose_active_planes(void **vaddr_out,
>  				 struct vkms_composer *primary_composer,
> -				 struct vkms_composer *cursor_composer)
> +				 struct vkms_crtc_state *crtc_state)
>  {
>  	struct drm_framebuffer *fb = &primary_composer->fb;
>  	struct drm_gem_object *gem_obj = drm_gem_fb_get_obj(fb, 0);
>  	struct drm_gem_shmem_object *shmem_obj = to_drm_gem_shmem_obj(gem_obj);
> +	int i;
>  
>  	if (!*vaddr_out) {
>  		*vaddr_out = kzalloc(shmem_obj->base.size, GFP_KERNEL);
> @@ -195,8 +196,14 @@ static int compose_active_planes(void **vaddr_out,
>  
>  	memcpy(*vaddr_out, shmem_obj->vaddr, shmem_obj->base.size);
>  
> -	if (cursor_composer)
> -		compose_plane(primary_composer, cursor_composer, *vaddr_out);
> +	/* If there are other planes besides primary, we consider the active
> +	 * planes should be in z-order and compose them associatively:
> +	 * ((primary <- overlay) <- cursor)
> +	 */
> +	for (i = 1; i < crtc_state->num_active_planes; i++)
> +		compose_plane(primary_composer,
> +			      crtc_state->active_planes[i]->composer,
> +			      *vaddr_out);
>  
>  	return 0;
>  }
> @@ -218,7 +225,7 @@ void vkms_composer_worker(struct work_struct *work)
>  	struct drm_crtc *crtc = crtc_state->base.crtc;
>  	struct vkms_output *out = drm_crtc_to_vkms_output(crtc);
>  	struct vkms_composer *primary_composer = NULL;
> -	struct vkms_composer *cursor_composer = NULL;
> +	struct vkms_plane_state *act_plane = NULL;
>  	bool crc_pending, wb_pending;
>  	void *vaddr_out = NULL;
>  	u32 crc32 = 0;
> @@ -242,11 +249,11 @@ void vkms_composer_worker(struct work_struct *work)
>  	if (!crc_pending)
>  		return;
>  
> -	if (crtc_state->num_active_planes >= 1)
> -		primary_composer = crtc_state->active_planes[0]->composer;
> -
> -	if (crtc_state->num_active_planes == 2)
> -		cursor_composer = crtc_state->active_planes[1]->composer;
> +	if (crtc_state->num_active_planes >= 1) {
> +		act_plane = crtc_state->active_planes[0];
> +		if (act_plane->base.plane->type == DRM_PLANE_TYPE_PRIMARY)
> +			primary_composer = act_plane->composer;
> +	}
>  
>  	if (!primary_composer)
>  		return;
> @@ -255,7 +262,7 @@ void vkms_composer_worker(struct work_struct *work)
>  		vaddr_out = crtc_state->active_writeback;
>  
>  	ret = compose_active_planes(&vaddr_out, primary_composer,
> -				    cursor_composer);
> +				    crtc_state);
>  	if (ret) {
>  		if (ret == -EINVAL && !wb_pending)
>  			kfree(vaddr_out);
> diff --git a/drivers/gpu/drm/vkms/vkms_drv.c b/drivers/gpu/drm/vkms/vkms_drv.c
> index 2173b82606f6..027ffe759440 100644
> --- a/drivers/gpu/drm/vkms/vkms_drv.c
> +++ b/drivers/gpu/drm/vkms/vkms_drv.c
> @@ -44,6 +44,10 @@ static bool enable_writeback = true;
>  module_param_named(enable_writeback, enable_writeback, bool, 0444);
>  MODULE_PARM_DESC(enable_writeback, "Enable/Disable writeback connector support");
>  
> +static bool enable_overlay;
> +module_param_named(enable_overlay, enable_overlay, bool, 0444);
> +MODULE_PARM_DESC(enable_overlay, "Enable/Disable overlay support");
> +
>  DEFINE_DRM_GEM_FOPS(vkms_driver_fops);
>  
>  static void vkms_release(struct drm_device *dev)
> @@ -198,6 +202,7 @@ static int __init vkms_init(void)
>  
>  	config->cursor = enable_cursor;
>  	config->writeback = enable_writeback;
> +	config->overlay = enable_overlay;
>  
>  	return vkms_create(config);
>  }
> diff --git a/drivers/gpu/drm/vkms/vkms_drv.h b/drivers/gpu/drm/vkms/vkms_drv.h
> index 70fb79621617..ac8c9c2fa4ed 100644
> --- a/drivers/gpu/drm/vkms/vkms_drv.h
> +++ b/drivers/gpu/drm/vkms/vkms_drv.h
> @@ -89,6 +89,7 @@ struct vkms_device;
>  struct vkms_config {
>  	bool writeback;
>  	bool cursor;
> +	bool overlay;
>  	/* only set when instantiated */
>  	struct vkms_device *dev;
>  };
> diff --git a/drivers/gpu/drm/vkms/vkms_output.c b/drivers/gpu/drm/vkms/vkms_output.c
> index 6979fbc7f821..04406bd3ff02 100644
> --- a/drivers/gpu/drm/vkms/vkms_output.c
> +++ b/drivers/gpu/drm/vkms/vkms_output.c
> @@ -39,7 +39,7 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
>  	struct drm_connector *connector = &output->connector;
>  	struct drm_encoder *encoder = &output->encoder;
>  	struct drm_crtc *crtc = &output->crtc;
> -	struct vkms_plane *primary, *cursor = NULL;
> +	struct vkms_plane *primary, *cursor = NULL, *overlay = NULL;
>  	int ret;
>  	int writeback;
>  
> @@ -47,6 +47,15 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
>  	if (IS_ERR(primary))
>  		return PTR_ERR(primary);
>  
> +	if (vkmsdev->config->overlay) {
> +		overlay = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_OVERLAY, index);
> +		if (IS_ERR(overlay))
> +			return PTR_ERR(overlay);
> +
> +		if (!overlay->base.possible_crtcs)
> +			overlay->base.possible_crtcs = drm_crtc_mask(crtc);
> +	}
> +
>  	if (vkmsdev->config->cursor) {
>  		cursor = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_CURSOR, index);
>  		if (IS_ERR(cursor))
> diff --git a/drivers/gpu/drm/vkms/vkms_plane.c b/drivers/gpu/drm/vkms/vkms_plane.c
> index da4251aff67f..107521ace597 100644
> --- a/drivers/gpu/drm/vkms/vkms_plane.c
> +++ b/drivers/gpu/drm/vkms/vkms_plane.c
> @@ -133,7 +133,7 @@ static int vkms_plane_atomic_check(struct drm_plane *plane,
>  	if (IS_ERR(crtc_state))
>  		return PTR_ERR(crtc_state);
>  
> -	if (plane->type == DRM_PLANE_TYPE_CURSOR)
> +	if (plane->type != DRM_PLANE_TYPE_PRIMARY)
>  		can_position = true;
>  
>  	ret = drm_atomic_helper_check_plane_state(new_plane_state, crtc_state,
> @@ -200,14 +200,23 @@ struct vkms_plane *vkms_plane_init(struct vkms_device *vkmsdev,
>  	const u32 *formats;
>  	int nformats;
>  
> -	if (type == DRM_PLANE_TYPE_CURSOR) {
> +	switch (type) {
> +	case DRM_PLANE_TYPE_PRIMARY:
> +		formats = vkms_formats;
> +		nformats = ARRAY_SIZE(vkms_formats);
> +		funcs = &vkms_primary_helper_funcs;
> +		break;
> +	case DRM_PLANE_TYPE_CURSOR:
> +	case DRM_PLANE_TYPE_OVERLAY:
>  		formats = vkms_plane_formats;
>  		nformats = ARRAY_SIZE(vkms_plane_formats);
>  		funcs = &vkms_primary_helper_funcs;
> -	} else {
> +		break;
> +	default:
>  		formats = vkms_formats;
>  		nformats = ARRAY_SIZE(vkms_formats);
>  		funcs = &vkms_primary_helper_funcs;
> +		break;
>  	}
>  
>  	plane = drmm_universal_plane_alloc(dev, struct vkms_plane, base, 1 << index,


[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2021-04-26  8:07 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-24  8:22 [PATCH v4 0/4] drm/vkms: add overlay plane support Melissa Wen
2021-04-24  8:23 ` [PATCH v4 1/4] drm/vkms: init plane using drmm_universal_plane_alloc Melissa Wen
2021-04-24  8:24 ` [PATCH v4 2/4] drm/vkms: rename cursor to plane on ops of planes composition Melissa Wen
2021-04-24  8:25 ` [PATCH v4 3/4] drm/vkms: add XRGB " Melissa Wen
2021-04-26  8:03   ` Pekka Paalanen
2021-04-26 16:28     ` Daniel Vetter
2021-04-26 17:31       ` Melissa Wen
2021-04-27  8:10         ` Pekka Paalanen
2021-04-27  8:31           ` Melissa Wen
2021-04-27  9:04           ` Daniel Vetter
2021-04-24  8:26 ` [PATCH v4 4/4] drm/vkms: add overlay support Melissa Wen
2021-04-26  8:07   ` Pekka Paalanen [this message]
2021-04-26 17:07     ` Melissa Wen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210426110704.7cde8c1a@eldfell \
    --to=ppaalanen@gmail.com \
    --cc=airlied@linux.ie \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=hamohammed.sa@gmail.com \
    --cc=melissa.srw@gmail.com \
    --cc=rodrigosiqueiramelo@gmail.com \
    --cc=sylphrenadin@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).