dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Werner Sembach <wse@tuxedocomputers.com>
To: wse@tuxedocomputers.com, airlied@linux.ie, daniel@ffwll.ch,
	intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
	linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Subject: [PATCH] drm/i915/display Try YCbCr420 color when RGB fails
Date: Thu, 29 Apr 2021 14:05:53 +0200	[thread overview]
Message-ID: <20210429120553.7823-1-wse@tuxedocomputers.com> (raw)

When encoder validation of a display mode fails, retry with less bandwidth
heavy YCbCr420 color mode, if available. This enables some HDMI 1.4 setups
to support 4k60Hz output, which previously failed silently.

AMDGPU had nearly the exact same issue. This problem description is
therefore copied from my commit message of the AMDGPU patch.

On some setups, while the monitor and the gpu support display modes with
pixel clocks of up to 600MHz, the link encoder might not. This prevents
YCbCr444 and RGB encoding for 4k60Hz, but YCbCr420 encoding might still be
possible. However, which color mode is used is decided before the link
encoder capabilities are checked. This patch fixes the problem by retrying
to find a display mode with YCbCr420 enforced and using it, if it is
valid.

I'm not entierly sure if the second
"if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv))" check in
intel_hdmi_compute_config(...) after forcing ycbcr420 is necessary. I
included it to better be safe then sorry.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
---
Rebased from 5.12 to drm-tip and resend to resolve merge conflict.

From 876c1c8d970ff2a411ee8d08651bd4edbe9ecb3d Mon Sep 17 00:00:00 2001
From: Werner Sembach <wse@tuxedocomputers.com>
Date: Thu, 29 Apr 2021 13:59:30 +0200
Subject: [PATCH] Retry using YCbCr420 encoding if clock setup for RGB fails

---
 drivers/gpu/drm/i915/display/intel_hdmi.c | 80 +++++++++++++++++------
 1 file changed, 60 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index 46de56af33db..c9b5a7d7f9c6 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -1861,6 +1861,30 @@ static int intel_hdmi_port_clock(int clock, int bpc)
 	return clock * bpc / 8;
 }
 
+static enum drm_mode_status
+intel_hdmi_check_bpc(struct intel_hdmi *hdmi, int clock, bool has_hdmi_sink, struct drm_i915_private *dev_priv)
+{
+	enum drm_mode_status status;
+
+	/* check if we can do 8bpc */
+	status = hdmi_port_clock_valid(hdmi, intel_hdmi_port_clock(clock, 8),
+				       true, has_hdmi_sink);
+
+	if (has_hdmi_sink) {
+		/* if we can't do 8bpc we may still be able to do 12bpc */
+		if (status != MODE_OK && !HAS_GMCH(dev_priv))
+			status = hdmi_port_clock_valid(hdmi, intel_hdmi_port_clock(clock, 12),
+						       true, has_hdmi_sink);
+
+		/* if we can't do 8,12bpc we may still be able to do 10bpc */
+		if (status != MODE_OK && DISPLAY_VER(dev_priv) >= 11)
+			status = hdmi_port_clock_valid(hdmi, intel_hdmi_port_clock(clock, 10),
+						       true, has_hdmi_sink);
+	}
+
+	return status;
+}
+
 static enum drm_mode_status
 intel_hdmi_mode_valid(struct drm_connector *connector,
 		      struct drm_display_mode *mode)
@@ -1891,23 +1915,18 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
 	if (drm_mode_is_420_only(&connector->display_info, mode))
 		clock /= 2;
 
-	/* check if we can do 8bpc */
-	status = hdmi_port_clock_valid(hdmi, intel_hdmi_port_clock(clock, 8),
-				       true, has_hdmi_sink);
+	status = intel_hdmi_check_bpc(hdmi, clock, has_hdmi_sink, dev_priv);
 
-	if (has_hdmi_sink) {
-		/* if we can't do 8bpc we may still be able to do 12bpc */
-		if (status != MODE_OK && !HAS_GMCH(dev_priv))
-			status = hdmi_port_clock_valid(hdmi, intel_hdmi_port_clock(clock, 12),
-						       true, has_hdmi_sink);
+	if (status != MODE_OK) {
+		if (drm_mode_is_420_also(&connector->display_info, mode)) {
+			/* if we can't do full color resolution we may still be able to do reduced color resolution */
+			clock /= 2;
 
-		/* if we can't do 8,12bpc we may still be able to do 10bpc */
-		if (status != MODE_OK && DISPLAY_VER(dev_priv) >= 11)
-			status = hdmi_port_clock_valid(hdmi, intel_hdmi_port_clock(clock, 10),
-						       true, has_hdmi_sink);
+			status = intel_hdmi_check_bpc(hdmi, clock, has_hdmi_sink, dev_priv);
+		}
+		if (status != MODE_OK)
+			return status;
 	}
-	if (status != MODE_OK)
-		return status;
 
 	return intel_mode_valid_max_plane_size(dev_priv, mode, false);
 }
@@ -1990,14 +2009,17 @@ static bool hdmi_deep_color_possible(const struct intel_crtc_state *crtc_state,
 
 static int
 intel_hdmi_ycbcr420_config(struct intel_crtc_state *crtc_state,
-			   const struct drm_connector_state *conn_state)
+			   const struct drm_connector_state *conn_state,
+			   const bool force_ycbcr420)
 {
 	struct drm_connector *connector = conn_state->connector;
 	struct drm_i915_private *i915 = to_i915(connector->dev);
 	const struct drm_display_mode *adjusted_mode =
 		&crtc_state->hw.adjusted_mode;
 
-	if (!drm_mode_is_420_only(&connector->display_info, adjusted_mode))
+	if (!(drm_mode_is_420_only(&connector->display_info, adjusted_mode) ||
+			(force_ycbcr420 &&
+			drm_mode_is_420_also(&connector->display_info, adjusted_mode))))
 		return 0;
 
 	if (!connector->ycbcr_420_allowed) {
@@ -2126,7 +2148,7 @@ int intel_hdmi_compute_config(struct intel_encoder *encoder,
 	struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
 	struct drm_connector *connector = conn_state->connector;
 	struct drm_scdc *scdc = &connector->display_info.hdmi.scdc;
-	int ret;
+	int ret, ret_saved;
 
 	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return -EINVAL;
@@ -2141,7 +2163,7 @@ int intel_hdmi_compute_config(struct intel_encoder *encoder,
 	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
 		pipe_config->pixel_multiplier = 2;
 
-	ret = intel_hdmi_ycbcr420_config(pipe_config, conn_state);
+	ret = intel_hdmi_ycbcr420_config(pipe_config, conn_state, false);
 	if (ret)
 		return ret;
 
@@ -2155,8 +2177,26 @@ int intel_hdmi_compute_config(struct intel_encoder *encoder,
 		intel_hdmi_has_audio(encoder, pipe_config, conn_state);
 
 	ret = intel_hdmi_compute_clock(encoder, pipe_config);
-	if (ret)
-		return ret;
+	if (ret) {
+		ret_saved = ret;
+
+		ret = intel_hdmi_ycbcr420_config(pipe_config, conn_state, true);
+		if (ret)
+			return ret;
+
+		if (pipe_config->output_format != INTEL_OUTPUT_FORMAT_YCBCR420)
+			return ret_saved;
+
+		pipe_config->limited_color_range =
+			intel_hdmi_limited_color_range(pipe_config, conn_state);
+
+		if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv))
+			pipe_config->has_pch_encoder = true;
+
+		ret = intel_hdmi_compute_clock(encoder, pipe_config);
+		if (ret)
+			return ret;
+	}
 
 	if (conn_state->picture_aspect_ratio)
 		adjusted_mode->picture_aspect_ratio =
-- 
2.25.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

             reply	other threads:[~2021-04-29 12:06 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-29 12:05 Werner Sembach [this message]
2021-04-30 16:56 ` [PATCH] drm/i915/display Try YCbCr420 color when RGB fails Ville Syrjälä
2021-05-03 11:39   ` Werner Sembach
2021-05-03 15:05     ` Ville Syrjälä
  -- strict thread matches above, loose matches on Subject: below --
2021-04-28 17:38 Werner Sembach

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210429120553.7823-1-wse@tuxedocomputers.com \
    --to=wse@tuxedocomputers.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).