[PATCH AUTOSEL 4.19 12/35] drm/bridge/analogix/anx78xx: Setup encoder before registering connector

[PATCH AUTOSEL 4.19 12/35] drm/bridge/analogix/anx78xx: Setup encoder before registering connector

[Sasha Levin]

From: Lyude Paul <lyude@redhat.com>

[ Upstream commit 9962849d0871f5e53d0e3b3d84561f8f2847fbf4 ]

Since encoder mappings for connectors are exposed to userspace, we should
be attaching the encoder before exposing the connector to userspace. Just a
drive-by fix for an issue I noticed while fixing up usages of
drm_dp_aux_init()/drm_dp_aux_register() across the tree.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219215326.2227596-9-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/analogix-anx78xx.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix-anx78xx.c
index cc820e9aea1d..9fa1610b237a 100644
--- a/drivers/gpu/drm/bridge/analogix-anx78xx.c
+++ b/drivers/gpu/drm/bridge/analogix-anx78xx.c
@@ -1042,12 +1042,6 @@ static int anx78xx_bridge_attach(struct drm_bridge *bridge)
 	drm_connector_helper_add(&anx78xx->connector,
 				 &anx78xx_connector_helper_funcs);
 
-	err = drm_connector_register(&anx78xx->connector);
-	if (err) {
-		DRM_ERROR("Failed to register connector: %d\n", err);
-		return err;
-	}
-
 	anx78xx->connector.polled = DRM_CONNECTOR_POLL_HPD;
 
 	err = drm_connector_attach_encoder(&anx78xx->connector,
@@ -1057,6 +1051,12 @@ static int anx78xx_bridge_attach(struct drm_bridge *bridge)
 		return err;
 	}
 
+	err = drm_connector_register(&anx78xx->connector);
+	if (err) {
+		DRM_ERROR("Failed to register connector: %d\n", err);
+		return err;
+	}
+
 	return 0;
 }
 
-- 
2.30.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 13/35] drm/bridge/analogix/anx78xx: Cleanup on error in anx78xx_bridge_attach()

[Sasha Levin]

From: Lyude Paul <lyude@redhat.com>

[ Upstream commit 212ee8db84600f7b279b8645c62a112bff310995 ]

Just another issue I noticed while correcting usages of
drm_dp_aux_init()/drm_dp_aux_register() around the tree. If any of the
steps in anx78xx_bridge_attach() fail, we end up leaking resources. So,
let's fix that (and fix leaking a DP AUX adapter in the process) by
unrolling on errors.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219215326.2227596-10-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/analogix-anx78xx.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix-anx78xx.c
index 9fa1610b237a..84a261c1b54f 100644
--- a/drivers/gpu/drm/bridge/analogix-anx78xx.c
+++ b/drivers/gpu/drm/bridge/analogix-anx78xx.c
@@ -1036,7 +1036,7 @@ static int anx78xx_bridge_attach(struct drm_bridge *bridge)
 				 DRM_MODE_CONNECTOR_DisplayPort);
 	if (err) {
 		DRM_ERROR("Failed to initialize connector: %d\n", err);
-		return err;
+		goto aux_unregister;
 	}
 
 	drm_connector_helper_add(&anx78xx->connector,
@@ -1048,16 +1048,21 @@ static int anx78xx_bridge_attach(struct drm_bridge *bridge)
 					   bridge->encoder);
 	if (err) {
 		DRM_ERROR("Failed to link up connector to encoder: %d\n", err);
-		return err;
+		goto connector_cleanup;
 	}
 
 	err = drm_connector_register(&anx78xx->connector);
 	if (err) {
 		DRM_ERROR("Failed to register connector: %d\n", err);
-		return err;
+		goto connector_cleanup;
 	}
 
 	return 0;
+connector_cleanup:
+	drm_connector_cleanup(&anx78xx->connector);
+aux_unregister:
+	drm_dp_aux_unregister(&anx78xx->aux);
+	return err;
 }
 
 static enum drm_mode_status
-- 
2.30.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 14/35] drm/amdgpu : Fix asic reset regression issue introduce by 8f211fe8ac7c4f

[Sasha Levin]

From: shaoyunl <shaoyun.liu@amd.com>

[ Upstream commit c8941550aa66b2a90f4b32c45d59e8571e33336e ]

This recent change introduce SDMA interrupt info printing with irq->process function.
These functions do not require a set function to enable/disable the irq

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c
index 1abf5b5bac9e..18402a6ba8fe 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c
@@ -447,7 +447,7 @@ void amdgpu_irq_gpu_reset_resume_helper(struct amdgpu_device *adev)
 		for (j = 0; j < AMDGPU_MAX_IRQ_SRC_ID; ++j) {
 			struct amdgpu_irq_src *src = adev->irq.client[i].sources[j];
 
-			if (!src)
+			if (!src || !src->funcs || !src->funcs->set)
 				continue;
 			for (k = 0; k < src->num_types; k++)
 				amdgpu_irq_update(adev, src, k);
-- 
2.30.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 29/35] drm/msm/mdp5: Configure PP_SYNC_HEIGHT to double the vtotal

[Sasha Levin]

From: Marijn Suijten <marijn.suijten@somainline.org>

[ Upstream commit 2ad52bdb220de5ab348098e3482b01235d15a842 ]

Leaving this at a close-to-maximum register value 0xFFF0 means it takes
very long for the MDSS to generate a software vsync interrupt when the
hardware TE interrupt doesn't arrive.  Configuring this to double the
vtotal (like some downstream kernels) leads to a frame to take at most
twice before the vsync signal, until hardware TE comes up.

In this case the hardware interrupt responsible for providing this
signal - "disp-te" gpio - is not hooked up to the mdp5 vsync/pp logic at
all.  This solves severe panel update issues observed on at least the
Xperia Loire and Tone series, until said gpio is properly hooked up to
an irq.

Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210406214726.131534-2-marijn.suijten@somainline.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/mdp5/mdp5_cmd_encoder.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_cmd_encoder.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_cmd_encoder.c
index d6f79dc755b4..14e2ce87bab1 100644
--- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_cmd_encoder.c
+++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_cmd_encoder.c
@@ -78,9 +78,17 @@ static int pingpong_tearcheck_setup(struct drm_encoder *encoder,
 		| MDP5_PP_SYNC_CONFIG_VSYNC_IN_EN;
 	cfg |= MDP5_PP_SYNC_CONFIG_VSYNC_COUNT(vclks_line);
 
+	/*
+	 * Tearcheck emits a blanking signal every vclks_line * vtotal * 2 ticks on
+	 * the vsync_clk equating to roughly half the desired panel refresh rate.
+	 * This is only necessary as stability fallback if interrupts from the
+	 * panel arrive too late or not at all, but is currently used by default
+	 * because these panel interrupts are not wired up yet.
+	 */
 	mdp5_write(mdp5_kms, REG_MDP5_PP_SYNC_CONFIG_VSYNC(pp_id), cfg);
 	mdp5_write(mdp5_kms,
-		REG_MDP5_PP_SYNC_CONFIG_HEIGHT(pp_id), 0xfff0);
+		REG_MDP5_PP_SYNC_CONFIG_HEIGHT(pp_id), (2 * mode->vtotal));
+
 	mdp5_write(mdp5_kms,
 		REG_MDP5_PP_VSYNC_INIT_VAL(pp_id), mode->vdisplay);
 	mdp5_write(mdp5_kms, REG_MDP5_PP_RD_PTR_IRQ(pp_id), mode->vdisplay + 1);
-- 
2.30.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 30/35] amdgpu: avoid incorrect %hu format string

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 7d98d416c2cc1c1f7d9508e887de4630e521d797 ]

clang points out that the %hu format string does not match the type
of the variables here:

drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c:263:7: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat]
                                  version_major, version_minor);
                                  ^~~~~~~~~~~~~
include/drm/drm_print.h:498:19: note: expanded from macro 'DRM_ERROR'
        __drm_err(fmt, ##__VA_ARGS__)
                  ~~~    ^~~~~~~~~~~

Change it to a regular %u, the same way a previous patch did for
another instance of the same warning.

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c
index e5a6db6beab7..8c5f39beee7c 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c
@@ -231,7 +231,7 @@ int amdgpu_uvd_sw_init(struct amdgpu_device *adev)
 		if ((adev->asic_type == CHIP_POLARIS10 ||
 		     adev->asic_type == CHIP_POLARIS11) &&
 		    (adev->uvd.fw_version < FW_1_66_16))
-			DRM_ERROR("POLARIS10/11 UVD firmware version %hu.%hu is too old.\n",
+			DRM_ERROR("POLARIS10/11 UVD firmware version %u.%u is too old.\n",
 				  version_major, version_minor);
 	} else {
 		unsigned int enc_major, enc_minor, dec_minor;
-- 
2.30.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 31/35] drm/amdgpu: fix NULL pointer dereference

[Sasha Levin]

From: Guchun Chen <guchun.chen@amd.com>

[ Upstream commit 3c3dc654333f6389803cdcaf03912e94173ae510 ]

ttm->sg needs to be checked before accessing its child member.

Call Trace:
 amdgpu_ttm_backend_destroy+0x12/0x70 [amdgpu]
 ttm_bo_cleanup_memtype_use+0x3a/0x60 [ttm]
 ttm_bo_release+0x17d/0x300 [ttm]
 amdgpu_bo_unref+0x1a/0x30 [amdgpu]
 amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x78b/0x8b0 [amdgpu]
 kfd_ioctl_alloc_memory_of_gpu+0x118/0x220 [amdgpu]
 kfd_ioctl+0x222/0x400 [amdgpu]
 ? kfd_dev_is_large_bar+0x90/0x90 [amdgpu]
 __x64_sys_ioctl+0x8e/0xd0
 ? __context_tracking_exit+0x52/0x90
 do_syscall_64+0x33/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f97f264d317
Code: b3 66 90 48 8b 05 71 4b 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 41 4b 2d 00 f7 d8 64 89 01 48
RSP: 002b:00007ffdb402c338 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f97f3cc63a0 RCX: 00007f97f264d317
RDX: 00007ffdb402c380 RSI: 00000000c0284b16 RDI: 0000000000000003
RBP: 00007ffdb402c380 R08: 00007ffdb402c428 R09: 00000000c4000004
R10: 00000000c4000004 R11: 0000000000000246 R12: 00000000c0284b16
R13: 0000000000000003 R14: 00007f97f3cc63a0 R15: 00007f8836200000

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
index abad7460084f..757fa486aac4 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
@@ -971,7 +971,7 @@ static void amdgpu_ttm_tt_unpin_userptr(struct ttm_tt *ttm)
 		DMA_BIDIRECTIONAL : DMA_TO_DEVICE;
 
 	/* double check that we don't free the table twice */
-	if (!ttm->sg->sgl)
+	if (!ttm->sg || !ttm->sg->sgl)
 		return;
 
 	/* unmap the pages mapped to the device */
-- 
2.30.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel