[PATCH AUTOSEL 4.9 08/24] drm/bridge/analogix/anx78xx: Setup encoder before registering connector

[PATCH AUTOSEL 4.9 08/24] drm/bridge/analogix/anx78xx: Setup encoder before registering connector

[Sasha Levin]

From: Lyude Paul <lyude@redhat.com>

[ Upstream commit 9962849d0871f5e53d0e3b3d84561f8f2847fbf4 ]

Since encoder mappings for connectors are exposed to userspace, we should
be attaching the encoder before exposing the connector to userspace. Just a
drive-by fix for an issue I noticed while fixing up usages of
drm_dp_aux_init()/drm_dp_aux_register() across the tree.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219215326.2227596-9-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/analogix-anx78xx.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix-anx78xx.c
index eb97e88a103c..16babacb7cf0 100644
--- a/drivers/gpu/drm/bridge/analogix-anx78xx.c
+++ b/drivers/gpu/drm/bridge/analogix-anx78xx.c
@@ -1045,12 +1045,6 @@ static int anx78xx_bridge_attach(struct drm_bridge *bridge)
 	drm_connector_helper_add(&anx78xx->connector,
 				 &anx78xx_connector_helper_funcs);
 
-	err = drm_connector_register(&anx78xx->connector);
-	if (err) {
-		DRM_ERROR("Failed to register connector: %d\n", err);
-		return err;
-	}
-
 	anx78xx->connector.polled = DRM_CONNECTOR_POLL_HPD;
 
 	err = drm_mode_connector_attach_encoder(&anx78xx->connector,
@@ -1060,6 +1054,12 @@ static int anx78xx_bridge_attach(struct drm_bridge *bridge)
 		return err;
 	}
 
+	err = drm_connector_register(&anx78xx->connector);
+	if (err) {
+		DRM_ERROR("Failed to register connector: %d\n", err);
+		return err;
+	}
+
 	return 0;
 }
 
-- 
2.30.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.9 09/24] drm/bridge/analogix/anx78xx: Cleanup on error in anx78xx_bridge_attach()

[Sasha Levin]

From: Lyude Paul <lyude@redhat.com>

[ Upstream commit 212ee8db84600f7b279b8645c62a112bff310995 ]

Just another issue I noticed while correcting usages of
drm_dp_aux_init()/drm_dp_aux_register() around the tree. If any of the
steps in anx78xx_bridge_attach() fail, we end up leaking resources. So,
let's fix that (and fix leaking a DP AUX adapter in the process) by
unrolling on errors.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219215326.2227596-10-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/analogix-anx78xx.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix-anx78xx.c
index 16babacb7cf0..5a1121af6664 100644
--- a/drivers/gpu/drm/bridge/analogix-anx78xx.c
+++ b/drivers/gpu/drm/bridge/analogix-anx78xx.c
@@ -1039,7 +1039,7 @@ static int anx78xx_bridge_attach(struct drm_bridge *bridge)
 				 DRM_MODE_CONNECTOR_DisplayPort);
 	if (err) {
 		DRM_ERROR("Failed to initialize connector: %d\n", err);
-		return err;
+		goto aux_unregister;
 	}
 
 	drm_connector_helper_add(&anx78xx->connector,
@@ -1051,16 +1051,21 @@ static int anx78xx_bridge_attach(struct drm_bridge *bridge)
 						bridge->encoder);
 	if (err) {
 		DRM_ERROR("Failed to link up connector to encoder: %d\n", err);
-		return err;
+		goto connector_cleanup;
 	}
 
 	err = drm_connector_register(&anx78xx->connector);
 	if (err) {
 		DRM_ERROR("Failed to register connector: %d\n", err);
-		return err;
+		goto connector_cleanup;
 	}
 
 	return 0;
+connector_cleanup:
+	drm_connector_cleanup(&anx78xx->connector);
+aux_unregister:
+	drm_dp_aux_unregister(&anx78xx->aux);
+	return err;
 }
 
 static bool anx78xx_bridge_mode_fixup(struct drm_bridge *bridge,
-- 
2.30.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.9 21/24] drm/msm/mdp5: Configure PP_SYNC_HEIGHT to double the vtotal

[Sasha Levin]

From: Marijn Suijten <marijn.suijten@somainline.org>

[ Upstream commit 2ad52bdb220de5ab348098e3482b01235d15a842 ]

Leaving this at a close-to-maximum register value 0xFFF0 means it takes
very long for the MDSS to generate a software vsync interrupt when the
hardware TE interrupt doesn't arrive.  Configuring this to double the
vtotal (like some downstream kernels) leads to a frame to take at most
twice before the vsync signal, until hardware TE comes up.

In this case the hardware interrupt responsible for providing this
signal - "disp-te" gpio - is not hooked up to the mdp5 vsync/pp logic at
all.  This solves severe panel update issues observed on at least the
Xperia Loire and Tone series, until said gpio is properly hooked up to
an irq.

Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210406214726.131534-2-marijn.suijten@somainline.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c
index c627ab6d0061..8ac54b9dcd39 100644
--- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c
+++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cmd_encoder.c
@@ -128,9 +128,17 @@ static int pingpong_tearcheck_setup(struct drm_encoder *encoder,
 		| MDP5_PP_SYNC_CONFIG_VSYNC_IN_EN;
 	cfg |= MDP5_PP_SYNC_CONFIG_VSYNC_COUNT(vclks_line);
 
+	/*
+	 * Tearcheck emits a blanking signal every vclks_line * vtotal * 2 ticks on
+	 * the vsync_clk equating to roughly half the desired panel refresh rate.
+	 * This is only necessary as stability fallback if interrupts from the
+	 * panel arrive too late or not at all, but is currently used by default
+	 * because these panel interrupts are not wired up yet.
+	 */
 	mdp5_write(mdp5_kms, REG_MDP5_PP_SYNC_CONFIG_VSYNC(pp_id), cfg);
 	mdp5_write(mdp5_kms,
-		REG_MDP5_PP_SYNC_CONFIG_HEIGHT(pp_id), 0xfff0);
+		REG_MDP5_PP_SYNC_CONFIG_HEIGHT(pp_id), (2 * mode->vtotal));
+
 	mdp5_write(mdp5_kms,
 		REG_MDP5_PP_VSYNC_INIT_VAL(pp_id), mode->vdisplay);
 	mdp5_write(mdp5_kms, REG_MDP5_PP_RD_PTR_IRQ(pp_id), mode->vdisplay + 1);
-- 
2.30.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.9 22/24] drm/amdgpu: fix NULL pointer dereference

[Sasha Levin]

From: Guchun Chen <guchun.chen@amd.com>

[ Upstream commit 3c3dc654333f6389803cdcaf03912e94173ae510 ]

ttm->sg needs to be checked before accessing its child member.

Call Trace:
 amdgpu_ttm_backend_destroy+0x12/0x70 [amdgpu]
 ttm_bo_cleanup_memtype_use+0x3a/0x60 [ttm]
 ttm_bo_release+0x17d/0x300 [ttm]
 amdgpu_bo_unref+0x1a/0x30 [amdgpu]
 amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x78b/0x8b0 [amdgpu]
 kfd_ioctl_alloc_memory_of_gpu+0x118/0x220 [amdgpu]
 kfd_ioctl+0x222/0x400 [amdgpu]
 ? kfd_dev_is_large_bar+0x90/0x90 [amdgpu]
 __x64_sys_ioctl+0x8e/0xd0
 ? __context_tracking_exit+0x52/0x90
 do_syscall_64+0x33/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f97f264d317
Code: b3 66 90 48 8b 05 71 4b 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 41 4b 2d 00 f7 d8 64 89 01 48
RSP: 002b:00007ffdb402c338 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f97f3cc63a0 RCX: 00007f97f264d317
RDX: 00007ffdb402c380 RSI: 00000000c0284b16 RDI: 0000000000000003
RBP: 00007ffdb402c380 R08: 00007ffdb402c428 R09: 00000000c4000004
R10: 00000000c4000004 R11: 0000000000000246 R12: 00000000c0284b16
R13: 0000000000000003 R14: 00007f97f3cc63a0 R15: 00007f8836200000

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
index 80c60a62d39e..7271e3f32d82 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
@@ -652,7 +652,7 @@ static void amdgpu_ttm_tt_unpin_userptr(struct ttm_tt *ttm)
 		DMA_BIDIRECTIONAL : DMA_TO_DEVICE;
 
 	/* double check that we don't free the table twice */
-	if (!ttm->sg->sgl)
+	if (!ttm->sg || !ttm->sg->sgl)
 		return;
 
 	/* free the sg table and pages again */
-- 
2.30.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH AUTOSEL 4.9 08/24] drm/bridge/analogix/anx78xx: Setup encoder before registering connector

[Lyude Paul]

I would drop this patch for all of the stable kernel versions, it doesn't
really fix any user reported issues.

The other patches CC'd to me look fine for stable though

On Mon, 2021-05-03 at 12:42 -0400, Sasha Levin wrote:
> From: Lyude Paul <lyude@redhat.com>
> 
> [ Upstream commit 9962849d0871f5e53d0e3b3d84561f8f2847fbf4 ]
> 
> Since encoder mappings for connectors are exposed to userspace, we should
> be attaching the encoder before exposing the connector to userspace. Just a
> drive-by fix for an issue I noticed while fixing up usages of
> drm_dp_aux_init()/drm_dp_aux_register() across the tree.
> 
> Signed-off-by: Lyude Paul <lyude@redhat.com>
> Reviewed-by: Robert Foss <robert.foss@linaro.org>
> Link:
> https://patchwork.freedesktop.org/patch/msgid/20210219215326.2227596-9-lyude@redhat.com
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/gpu/drm/bridge/analogix-anx78xx.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c
> b/drivers/gpu/drm/bridge/analogix-anx78xx.c
> index eb97e88a103c..16babacb7cf0 100644
> --- a/drivers/gpu/drm/bridge/analogix-anx78xx.c
> +++ b/drivers/gpu/drm/bridge/analogix-anx78xx.c
> @@ -1045,12 +1045,6 @@ static int anx78xx_bridge_attach(struct drm_bridge
> *bridge)
>         drm_connector_helper_add(&anx78xx->connector,
>                                  &anx78xx_connector_helper_funcs);
>  
> -       err = drm_connector_register(&anx78xx->connector);
> -       if (err) {
> -               DRM_ERROR("Failed to register connector: %d\n", err);
> -               return err;
> -       }
> -
>         anx78xx->connector.polled = DRM_CONNECTOR_POLL_HPD;
>  
>         err = drm_mode_connector_attach_encoder(&anx78xx->connector,
> @@ -1060,6 +1054,12 @@ static int anx78xx_bridge_attach(struct drm_bridge
> *bridge)
>                 return err;
>         }
>  
> +       err = drm_connector_register(&anx78xx->connector);
> +       if (err) {
> +               DRM_ERROR("Failed to register connector: %d\n", err);
> +               return err;
> +       }
> +
>         return 0;
>  }
>  

-- 
Cheers,
 Lyude Paul (she/her)
 Software Engineer at Red Hat

Re: [PATCH AUTOSEL 4.9 08/24] drm/bridge/analogix/anx78xx: Setup encoder before registering connector

[Sasha Levin]

On Thu, May 06, 2021 at 01:14:10PM -0400, Lyude Paul wrote:
>I would drop this patch for all of the stable kernel versions, it doesn't
>really fix any user reported issues.

Will do, thanks!

-- 
Thanks,
Sasha