[PATCH v2 1/3] dt-bindings: display: convert faraday,tve200

[Corentin Labbe <clabbe@baylibre.com>]

Converts display/faraday,tve200.txt to yaml.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
Changes since v1:
- added two subsequent patchs fixing issue found when converting
- fixed all issues reported by Rob Herring
 .../bindings/display/faraday,tve200.txt       | 54 ---------------
 .../bindings/display/faraday,tve200.yaml      | 68 +++++++++++++++++++
 2 files changed, 68 insertions(+), 54 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/faraday,tve200.txt
 create mode 100644 Documentation/devicetree/bindings/display/faraday,tve200.yaml

diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.txt b/Documentation/devicetree/bindings/display/faraday,tve200.txt
deleted file mode 100644
index 82e3bc0b7485..000000000000
--- a/Documentation/devicetree/bindings/display/faraday,tve200.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-* Faraday TV Encoder TVE200
-
-Required properties:
-
-- compatible: must be one of:
-	"faraday,tve200"
-	"cortina,gemini-tvc", "faraday,tve200"
-
-- reg: base address and size of the control registers block
-
-- interrupts: contains an interrupt specifier for the interrupt
-	line from the TVE200
-
-- clock-names: should contain "PCLK" for the clock line clocking the
-	silicon and "TVE" for the 27MHz clock to the video driver
-
-- clocks: contains phandle and clock specifier pairs for the entries
-	in the clock-names property. See
-	Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Optional properties:
-
-- resets: contains the reset line phandle for the block
-
-Required sub-nodes:
-
-- port: describes LCD panel signals, following the common binding
-	for video transmitter interfaces; see
-	Documentation/devicetree/bindings/media/video-interfaces.txt
-	This port should have the properties:
-	reg = <0>;
-	It should have one endpoint connected to a remote endpoint where
-	the display is connected.
-
-Example:
-
-display-controller@6a000000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "faraday,tve200";
-	reg = <0x6a000000 0x1000>;
-	interrupts = <13 IRQ_TYPE_EDGE_RISING>;
-	resets = <&syscon GEMINI_RESET_TVC>;
-	clocks = <&syscon GEMINI_CLK_GATE_TVC>,
-		 <&syscon GEMINI_CLK_TVC>;
-	clock-names = "PCLK", "TVE";
-
-	port@0 {
-		reg = <0>;
-		display_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.yaml b/Documentation/devicetree/bindings/display/faraday,tve200.yaml
new file mode 100644
index 000000000000..e2ee77767321
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/faraday,tve200.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/faraday,tve200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday TV Encoder TVE200
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: faraday,tve200
+      - items:
+          - const: cortina,gemini-tvc
+          - const: faraday,tve200
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: PCLK
+      - const: TVE
+
+  clocks:
+    minItems: 2
+
+  resets:
+    minItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/cortina,gemini-clock.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/reset/cortina,gemini-reset.h>
+    display-controller@6a000000 {
+      compatible = "faraday,tve200";
+      reg = <0x6a000000 0x1000>;
+      interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+      resets = <&syscon GEMINI_RESET_TVC>;
+      clocks = <&syscon GEMINI_CLK_GATE_TVC>,
+               <&syscon GEMINI_CLK_TVC>;
+      clock-names = "PCLK", "TVE";
+
+      port {
+        display_out: endpoint {
+          remote-endpoint = <&panel_in>;
+        };
+      };
+    };
-- 
2.26.3