From: Marek Vasut <marex@denx.de>
To: dri-devel@lists.freedesktop.org
Cc: Marek Vasut <marex@denx.de>,
ch@denx.de, devicetree@vger.kernel.org,
Douglas Anderson <dianders@chromium.org>,
Stephen Boyd <swboyd@chromium.org>,
Rob Herring <robh+dt@kernel.org>,
Jagan Teki <jagan@amarulasolutions.com>,
Sam Ravnborg <sam@ravnborg.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Subject: [PATCH V5 1/2] dt-bindings: drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 bindings
Date: Wed, 2 Jun 2021 22:49:27 +0200 [thread overview]
Message-ID: <20210602204928.420342-1-marex@denx.de> (raw)
Add DT binding document for TI SN65DSI83 and SN65DSI84 DSI to LVDS bridge.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
---
V2: Add compatible string for SN65DSI84, since this is now tested on it
V3: - Add 0x2c as valid i2c address
- Switch to schemas/graph.yaml
- Constraint data-lanes to <1>, <1 2>, <1 2 3>, <1 2 3 4> only
- Indent example by 4 spaces
- Handle dual-link LVDS with two ports and describe the second DSI
channel-B port as well. Based on the register defaults of DSI83
and DSI84, it is likely that the LVDS-channel-B and DSI-channel-B
hardware is present in all the chips, so just reuse port@0 and 2
for DSI83, port@0,2,3 for DSI84 and all of 0,1,2,3 for DSI85 when
that is supported
V4: - Fix typo in port@3 description
- Add RB from Linus Walleij
- Replace oneOf: and const with enum:
- ref /schemas/media/video-interfaces.yaml#
- Drop empty endpoint: and properties:
V5: - Add RB from Rob Herring
---
.../bindings/display/bridge/ti,sn65dsi83.yaml | 159 ++++++++++++++++++
1 file changed, 159 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
new file mode 100644
index 0000000000000..d101233ae17ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ti,sn65dsi83.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SN65DSI83 and SN65DSI84 DSI to LVDS bridge chip
+
+maintainers:
+ - Marek Vasut <marex@denx.de>
+
+description: |
+ Texas Instruments SN65DSI83 1x Single-link MIPI DSI
+ to 1x Single-link LVDS
+ https://www.ti.com/lit/gpn/sn65dsi83
+ Texas Instruments SN65DSI84 1x Single-link MIPI DSI
+ to 1x Dual-link or 2x Single-link LVDS
+ https://www.ti.com/lit/gpn/sn65dsi84
+
+properties:
+ compatible:
+ enum:
+ - ti,sn65dsi83
+ - ti,sn65dsi84
+
+ reg:
+ enum:
+ - 0x2c
+ - 0x2d
+
+ enable-gpios:
+ maxItems: 1
+ description: GPIO specifier for bridge_en pin (active high).
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Video port for MIPI DSI Channel-A input
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ description: array of physical DSI data lane indexes.
+ minItems: 1
+ maxItems: 4
+ items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Video port for MIPI DSI Channel-B input
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ description: array of physical DSI data lane indexes.
+ minItems: 1
+ maxItems: 4
+ items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Video port for LVDS Channel-A output (panel or bridge).
+
+ port@3:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Video port for LVDS Channel-B output (panel or bridge).
+
+ required:
+ - port@0
+ - port@2
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+ - ports
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,sn65dsi83
+ then:
+ properties:
+ ports:
+ properties:
+ port@1: false
+ port@3: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ti,sn65dsi84
+ then:
+ properties:
+ ports:
+ properties:
+ port@1: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@2d {
+ compatible = "ti,sn65dsi83";
+ reg = <0x2d>;
+
+ enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ endpoint {
+ remote-endpoint = <&dsi0_out>;
+ data-lanes = <1 2 3 4>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ endpoint {
+ remote-endpoint = <&panel_in_lvds>;
+ };
+ };
+ };
+ };
+ };
--
2.30.2
next reply other threads:[~2021-06-02 20:49 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-02 20:49 Marek Vasut [this message]
2021-06-02 20:49 ` [PATCH V5 2/2] drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver Marek Vasut
2021-06-04 4:04 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210602204928.420342-1-marex@denx.de \
--to=marex@denx.de \
--cc=ch@denx.de \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jagan@amarulasolutions.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).