From: Matt Roper <matthew.d.roper@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>,
dri-devel@lists.freedesktop.org
Subject: [PATCH 37/53] drm/i915/dg2: Setup display outputs
Date: Thu, 1 Jul 2021 13:24:11 -0700 [thread overview]
Message-ID: <20210701202427.1547543-38-matthew.d.roper@intel.com> (raw)
In-Reply-To: <20210701202427.1547543-1-matthew.d.roper@intel.com>
DG2 has outputs on DDI A-D attached to what the bspec diagram shows as
"Combo PHY A-D." Note that despite being labelled "combo" the PHYs on
these outputs are Synopsys PHYs rather than traditional Intel combo PHY
technology.
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index c673d0c8fb4a..dc2b943a4e72 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -11329,7 +11329,12 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
if (!HAS_DISPLAY(dev_priv))
return;
- if (IS_ALDERLAKE_P(dev_priv)) {
+ if (IS_DG2(dev_priv)) {
+ intel_ddi_init(dev_priv, PORT_A);
+ intel_ddi_init(dev_priv, PORT_B);
+ intel_ddi_init(dev_priv, PORT_C);
+ intel_ddi_init(dev_priv, PORT_D_XELPD);
+ } else if (IS_ALDERLAKE_P(dev_priv)) {
intel_ddi_init(dev_priv, PORT_A);
intel_ddi_init(dev_priv, PORT_B);
intel_ddi_init(dev_priv, PORT_TC1);
--
2.25.4
next prev parent reply other threads:[~2021-07-01 20:26 UTC|newest]
Thread overview: 82+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-01 20:23 [PATCH 00/53] Begin enabling Xe_HP SDV and DG2 platforms Matt Roper
2021-07-01 20:23 ` [PATCH 01/53] drm/i915: Add "release id" version Matt Roper
2021-07-02 12:33 ` [Intel-gfx] " Tvrtko Ursulin
2021-07-05 11:52 ` Jani Nikula
2021-07-06 21:09 ` Lucas De Marchi
2021-07-07 8:34 ` Jani Nikula
2021-07-07 15:40 ` Lucas De Marchi
2021-07-06 20:57 ` Lucas De Marchi
2021-07-01 20:23 ` [PATCH 02/53] drm/i915: Add XE_HP initial definitions Matt Roper
2021-07-01 20:23 ` [PATCH 03/53] drm/i915: Fork DG1 interrupt handler Matt Roper
2021-07-02 9:21 ` Daniel Vetter
2021-07-06 22:48 ` [Intel-gfx] " Lucas De Marchi
2021-07-07 7:39 ` Daniel Vetter
2021-07-07 15:53 ` Lucas De Marchi
2021-07-01 20:23 ` [PATCH 04/53] drm/i915/xehp: VDBOX/VEBOX fusing registers are enable-based Matt Roper
2021-07-01 22:06 ` Lucas De Marchi
2021-07-01 20:23 ` [PATCH 05/53] drm/i915/gen12: Use fuse info to enable SFC Matt Roper
2021-07-01 22:19 ` [Intel-gfx] " Lucas De Marchi
2021-07-02 12:08 ` Tvrtko Ursulin
2021-07-01 20:23 ` [PATCH 06/53] drm/i915/selftests: Allow for larger engine counts Matt Roper
2021-07-01 22:33 ` Lucas De Marchi
2021-07-01 20:23 ` [PATCH 07/53] drm/i915/xehp: Extra media engines - Part 1 (engine definitions) Matt Roper
2021-07-02 12:22 ` [Intel-gfx] " Tvrtko Ursulin
2021-07-01 20:23 ` [PATCH 08/53] drm/i915/xehp: Extra media engines - Part 2 (interrupts) Matt Roper
2021-07-02 12:42 ` [Intel-gfx] " Tvrtko Ursulin
2021-07-06 21:15 ` Lucas De Marchi
2021-07-07 7:46 ` Tvrtko Ursulin
2021-07-01 20:23 ` [PATCH 09/53] drm/i915/xehp: Extra media engines - Part 3 (reset) Matt Roper
2021-07-01 20:23 ` [PATCH 10/53] drm/i915/xehp: Xe_HP forcewake support Matt Roper
2021-07-01 20:23 ` [PATCH 11/53] drm/i915/xehp: Define multicast register ranges Matt Roper
2021-07-01 20:23 ` [PATCH 12/53] drm/i915/xehp: Handle new device context ID format Matt Roper
2021-07-01 20:23 ` [PATCH 13/53] drm/i915/xehp: New engine context offsets Matt Roper
2021-07-01 20:23 ` [PATCH 14/53] drm/i915/xehp: handle new steering options Matt Roper
2021-07-01 20:23 ` [PATCH 15/53] drm/i915/xehp: Loop over all gslices for INSTDONE processing Matt Roper
2021-07-01 20:23 ` [PATCH 16/53] drm/i915/xehpsdv: add initial XeHP SDV definitions Matt Roper
2021-07-01 21:41 ` Rodrigo Vivi
2021-07-02 7:57 ` Jani Nikula
2021-07-01 20:23 ` [PATCH 17/53] drm/i915/xehp: Changes to ss/eu definitions Matt Roper
2021-07-01 20:23 ` [PATCH 18/53] drm/i915/xehpsdv: Add maximum sseu limits Matt Roper
2021-07-01 20:23 ` [PATCH 19/53] drm/i915/xehpsdv: Add compute DSS type Matt Roper
2021-07-01 20:23 ` [PATCH 20/53] drm/i915/xehpsdv: Define steering tables Matt Roper
2021-07-01 20:23 ` [PATCH 21/53] drm/i915/xehpsdv: Define MOCS table for XeHP SDV Matt Roper
2021-07-01 20:23 ` [PATCH 22/53] drm/i915/xehpsdv: factor out function to read RP_STATE_CAP Matt Roper
2021-07-01 20:23 ` [PATCH 23/53] drm/i915/xehpsdv: Read correct RP_STATE_CAP register Matt Roper
2021-07-01 21:41 ` Rodrigo Vivi
2021-07-01 20:23 ` [PATCH 24/53] drm/i915/dg2: add DG2 platform info Matt Roper
2021-07-01 20:23 ` [PATCH 25/53] drm/i915/dg2: DG2 uses the same sseu limits as XeHP SDV Matt Roper
2021-07-01 20:24 ` [PATCH 26/53] drm/i915/dg2: Add forcewake table Matt Roper
2021-07-01 20:24 ` [PATCH 27/53] drm/i915/dg2: Update LNCF steering ranges Matt Roper
2021-07-01 20:24 ` [PATCH 28/53] drm/i915/dg2: Add SQIDI steering Matt Roper
2021-07-01 20:24 ` [PATCH 29/53] drm/i915/dg2: Add new LRI reg offsets Matt Roper
2021-07-01 20:24 ` [PATCH 30/53] drm/i915/dg2: Maintain backward-compatible nested batch behavior Matt Roper
2021-07-01 20:24 ` [PATCH 31/53] drm/i915/dg2: Report INSTDONE_GEOM values in error state Matt Roper
2021-07-02 8:57 ` Lionel Landwerlin
2021-07-01 20:24 ` [PATCH 32/53] drm/i915/dg2: Define MOCS table for DG2 Matt Roper
2021-07-01 20:24 ` [PATCH 33/53] drm/i915/dg2: Add fake PCH Matt Roper
2021-07-06 21:47 ` Lucas De Marchi
2021-07-01 20:24 ` [PATCH 34/53] drm/i915/dg2: Add cdclk table and reference clock Matt Roper
2021-07-01 20:24 ` [PATCH 35/53] drm/i915/dg2: Skip shared DPLL handling Matt Roper
2021-07-01 20:24 ` [PATCH 36/53] drm/i915/dg2: Don't wait for AUX power well enable ACKs Matt Roper
2021-07-01 20:24 ` Matt Roper [this message]
2021-07-01 20:24 ` [PATCH 38/53] drm/i915/dg2: Add dbuf programming Matt Roper
2021-07-01 20:24 ` [PATCH 39/53] drm/i915/dg2: Don't program BW_BUDDY registers Matt Roper
2021-07-01 20:24 ` [PATCH 40/53] drm/i915/dg2: Don't read DRAM info Matt Roper
2021-07-01 20:24 ` [PATCH 41/53] drm/i915/dg2: DG2 has fixed memory bandwidth Matt Roper
2021-07-01 20:24 ` [PATCH 42/53] drm/i915/dg2: Add MPLLB programming for SNPS PHY Matt Roper
2021-07-01 20:24 ` [PATCH 43/53] drm/i915/dg2: Add MPLLB programming for HDMI Matt Roper
2021-07-01 20:24 ` [PATCH 44/53] drm/i915/dg2: Add vswing programming for SNPS phys Matt Roper
2021-07-02 8:14 ` Jani Nikula
2021-07-01 20:24 ` [PATCH 45/53] drm/i915/dg2: Update modeset sequences Matt Roper
2021-07-02 8:16 ` [Intel-gfx] " Jani Nikula
2021-07-01 20:24 ` [PATCH 46/53] drm/i915/dg2: Classify DG2 PHY types Matt Roper
2021-07-01 20:24 ` [PATCH 47/53] drm/i915/dg2: Wait for SNPS PHY calibration during display init Matt Roper
2021-07-01 20:24 ` [PATCH 48/53] drm/i915/dg2: Update lane disable power state during PSR Matt Roper
2021-07-01 20:24 ` [PATCH 49/53] drm/i915/dg2: Add DG2 to the PSR2 defeature list Matt Roper
2021-07-01 20:24 ` [PATCH 50/53] drm/i915/display/dsc: Add Per connector debugfs node for DSC BPP enable Matt Roper
2021-07-02 8:19 ` Jani Nikula
2021-08-23 5:42 ` Kulkarni, Vandita
2021-07-01 20:24 ` [PATCH 51/53] drm/i915/display/dsc: Set BPP in the kernel Matt Roper
2021-07-01 20:24 ` [PATCH 52/53] drm/i915/dg2: Update to bigjoiner path Matt Roper
2021-07-09 0:11 ` Navare, Manasi
2021-07-01 20:24 ` [PATCH 53/53] drm/i915/dg2: Configure PCON in DP pre-enable path Matt Roper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210701202427.1547543-38-matthew.d.roper@intel.com \
--to=matthew.d.roper@intel.com \
--cc=anusha.srivatsa@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).