[PATCH 09/14] drm/kmb : W/A for planar formats

[Anitha Chrisanthus <anitha.chrisanthus@intel.com>]

This is a work around for fully planar formats, where color corruption
was observed for formats like YU12, YU16 etc. Set the DMA Vstride and
Line width for U and V planes to the same as the Y plane and not the
actual pitch. For decoded video frames, continue to use the info from
metadata.

Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display")
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
---
 drivers/gpu/drm/kmb/kmb_plane.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/kmb/kmb_plane.c b/drivers/gpu/drm/kmb/kmb_plane.c
index dacec5c4266f..4523af949ea1 100644
--- a/drivers/gpu/drm/kmb/kmb_plane.c
+++ b/drivers/gpu/drm/kmb/kmb_plane.c
@@ -333,6 +333,7 @@ static void kmb_plane_atomic_update(struct drm_plane *plane,
 	struct disp_cfg *init_disp_cfg;
 	struct viv_vidmem_metadata *md = NULL;
 	struct drm_gem_object *gem_obj;
+	unsigned int cb_stride, cr_stride;
 
 	if (!plane || !new_plane_state || !old_plane_state)
 		return;
@@ -397,8 +398,10 @@ static void kmb_plane_atomic_update(struct drm_plane *plane,
 	val |= get_bits_per_pixel(fb->format);
 	/* Program Cb/Cr for planar formats */
 	if (num_planes > 1) {
-		kmb_write_lcd(kmb, LCD_LAYERn_DMA_CB_LINE_VSTRIDE(plane_id),
-				fb->pitches[1]);
+		cb_stride = md ? fb->pitches[1] : width * fb->format->cpp[0];
+		kmb_write_lcd(kmb,
+			      LCD_LAYERn_DMA_CB_LINE_VSTRIDE(plane_id),
+			      cb_stride);
 		kmb_write_lcd(kmb, LCD_LAYERn_DMA_CB_LINE_WIDTH(plane_id),
 			      (width * fb->format->cpp[0]));
 
@@ -419,9 +422,11 @@ static void kmb_plane_atomic_update(struct drm_plane *plane,
 					addr[U_PLANE]);
 
 		if (num_planes == 3) {
+			cr_stride = md ? fb->pitches[2] :
+				    width * fb->format->cpp[0];
 			kmb_write_lcd(kmb,
 				      LCD_LAYERn_DMA_CR_LINE_VSTRIDE(plane_id),
-				      fb->pitches[2]);
+				      cr_stride);
 
 			kmb_write_lcd(kmb,
 				      LCD_LAYERn_DMA_CR_LINE_WIDTH(plane_id),
-- 
2.25.1