[PATCH 1/2] dt-bindings: display/panel: Add AUO A030JTN01

From: Paul Cercueil <paul@crapouillou.net>
To: Thierry Reding <thierry.reding@gmail.com>,
	Sam Ravnborg <sam@ravnborg.org>, Rob Herring <robh+dt@kernel.org>
Cc: Christophe Branchereau <cbranchereau@gmail.com>,
	list@opendingux.net, dri-devel@lists.freedesktop.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH 1/2] dt-bindings: display/panel: Add AUO A030JTN01
Date: Sat, 28 Aug 2021 12:26:39 +0100	[thread overview]
Message-ID: <20210828112640.7248-1-paul@crapouillou.net> (raw)

Add binding for the AUO A030JTN01 panel, which is a 320x480 3.0" 4:3
24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit
interface.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 .../bindings/display/panel/auo,a030jtn01.yaml | 57 +++++++++++++++++++
 1 file changed, 57 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml
new file mode 100644
index 000000000000..21c9d62e3625
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/auo,a030jtn01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AUO A030JTN01 3.0" (320x480 pixels) 24-bit TFT LCD
+
+description: |
+  The panel must obey the rules for a SPI slave device as specified in
+  spi/spi-controller.yaml
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: auo,a030jtn01
+
+  backlight: true
+  port: true
+  power-supply: true
+  reg: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - reg
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    panel@0 {
+      compatible = "auo,a030jtn01";
+      reg = <0>;
+
+      spi-max-frequency = <10000000>;
+
+      reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>;
+      power-supply = <&lcd_power>;
+
+      backlight = <&backlight>;
+
+      port {
+        panel_input: endpoint {
+          remote-endpoint = <&panel_output>;
+        };
+      };
+    };
-- 
2.33.0

