dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Ramalingam C <ramalingam.c@intel.com>
To: intel-gfx <intel-gfx@lists.freedesktop.org>,
	dri-devel <dri-devel@lists.freedesktop.org>
Cc: "Swathi Dhanavanthri" <swathi.dhanavanthri@intel.com>,
	"Lucas De Marchi" <lucas.demarchi@intel.com>,
	"José Roberto de Souza" <jose.souza@intel.com>,
	"Shankar Uma" <uma.shankar@intel.com>
Subject: [PATCH 1/3] drm/i915/dg2: Enable 5th display
Date: Tue, 15 Feb 2022 11:21:52 +0530	[thread overview]
Message-ID: <20220215055154.15363-2-ramalingam.c@intel.com> (raw)
In-Reply-To: <20220215055154.15363-1-ramalingam.c@intel.com>

From: Matt Roper <matthew.d.roper@intel.com>

DG2 supports a 5th display output which the hardware refers to as "TC1,"
even though it isn't a Type-C output.  This behaves similarly to the TC1
on past platforms with just a couple minor differences:

 * DG2's TC1 bit in SDEISR is at bit 25 rather than 24 as it is on
   ICP/TGP/ADP.
 * DG2 doesn't need the hpd inversion setting that we had to use on DG1

Cc: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
---
 drivers/gpu/drm/i915/display/intel_gmbus.c | 16 ++++++++++++++--
 drivers/gpu/drm/i915/i915_irq.c            |  5 ++++-
 drivers/gpu/drm/i915/i915_reg.h            |  1 +
 3 files changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_gmbus.c b/drivers/gpu/drm/i915/display/intel_gmbus.c
index 6ce8c10fe975..2fad03250661 100644
--- a/drivers/gpu/drm/i915/display/intel_gmbus.c
+++ b/drivers/gpu/drm/i915/display/intel_gmbus.c
@@ -98,11 +98,21 @@ static const struct gmbus_pin gmbus_pins_dg1[] = {
 	[GMBUS_PIN_4_CNP] = { "dpd", GPIOE },
 };
 
+static const struct gmbus_pin gmbus_pins_dg2[] = {
+	[GMBUS_PIN_1_BXT] = { "dpa", GPIOB },
+	[GMBUS_PIN_2_BXT] = { "dpb", GPIOC },
+	[GMBUS_PIN_3_BXT] = { "dpc", GPIOD },
+	[GMBUS_PIN_4_CNP] = { "dpd", GPIOE },
+	[GMBUS_PIN_9_TC1_ICP] = { "tc1", GPIOJ },
+};
+
 /* pin is expected to be valid */
 static const struct gmbus_pin *get_gmbus_pin(struct drm_i915_private *dev_priv,
 					     unsigned int pin)
 {
-	if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG1)
+	if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG2)
+		return &gmbus_pins_dg2[pin];
+	else if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG1)
 		return &gmbus_pins_dg1[pin];
 	else if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP)
 		return &gmbus_pins_icp[pin];
@@ -123,7 +133,9 @@ bool intel_gmbus_is_valid_pin(struct drm_i915_private *dev_priv,
 {
 	unsigned int size;
 
-	if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG1)
+	if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG2)
+		size = ARRAY_SIZE(gmbus_pins_dg2);
+	else if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG1)
 		size = ARRAY_SIZE(gmbus_pins_dg1);
 	else if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP)
 		size = ARRAY_SIZE(gmbus_pins_icp);
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index fdd568ba4a16..4d81063b128c 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -179,6 +179,7 @@ static const u32 hpd_sde_dg1[HPD_NUM_PINS] = {
 	[HPD_PORT_B] = SDE_DDI_HOTPLUG_ICP(HPD_PORT_B),
 	[HPD_PORT_C] = SDE_DDI_HOTPLUG_ICP(HPD_PORT_C),
 	[HPD_PORT_D] = SDE_DDI_HOTPLUG_ICP(HPD_PORT_D),
+	[HPD_PORT_TC1] = SDE_TC_HOTPLUG_DG2(HPD_PORT_TC1),
 };
 
 static void intel_hpd_init_pins(struct drm_i915_private *dev_priv)
@@ -4424,7 +4425,9 @@ void intel_irq_init(struct drm_i915_private *dev_priv)
 		if (I915_HAS_HOTPLUG(dev_priv))
 			dev_priv->hotplug_funcs = &i915_hpd_funcs;
 	} else {
-		if (HAS_PCH_DG1(dev_priv))
+		if (HAS_PCH_DG2(dev_priv))
+			dev_priv->hotplug_funcs = &icp_hpd_funcs;
+		else if (HAS_PCH_DG1(dev_priv))
 			dev_priv->hotplug_funcs = &dg1_hpd_funcs;
 		else if (DISPLAY_VER(dev_priv) >= 11)
 			dev_priv->hotplug_funcs = &gen11_hpd_funcs;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 4ea1713e6b60..4d12abb2d7ff 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6182,6 +6182,7 @@
 /* south display engine interrupt: ICP/TGP */
 #define SDE_GMBUS_ICP			(1 << 23)
 #define SDE_TC_HOTPLUG_ICP(hpd_pin)	REG_BIT(24 + _HPD_PIN_TC(hpd_pin))
+#define SDE_TC_HOTPLUG_DG2(hpd_pin)	REG_BIT(25 + _HPD_PIN_TC(hpd_pin)) /* sigh */
 #define SDE_DDI_HOTPLUG_ICP(hpd_pin)	REG_BIT(16 + _HPD_PIN_DDI(hpd_pin))
 #define SDE_DDI_HOTPLUG_MASK_ICP	(SDE_DDI_HOTPLUG_ICP(HPD_PORT_D) | \
 					 SDE_DDI_HOTPLUG_ICP(HPD_PORT_C) | \
-- 
2.20.1


  reply	other threads:[~2022-02-15  5:51 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-15  5:51 [PATCH 0/3] drm/i915/dg2: 5th Display output Ramalingam C
2022-02-15  5:51 ` Ramalingam C [this message]
2022-02-16  8:02   ` [PATCH 1/3] drm/i915/dg2: Enable 5th display Shankar, Uma
2022-02-17 16:33     ` Matt Roper
2022-02-17 16:37   ` Matt Roper
2022-02-17 17:46     ` Ramalingam C
2022-02-17 18:42   ` [PATCH v2 1/3] drm/i915/dg2: Enable 5th port Ramalingam C
2022-02-17 21:15     ` [Intel-gfx] " Lucas De Marchi
2022-02-15  5:51 ` [PATCH 2/3] drm/i915/dg2: Drop 38.4 MHz MPLLB tables Ramalingam C
2022-02-16  8:06   ` Shankar, Uma
2022-02-17 19:35   ` [Intel-gfx] " Lucas De Marchi
2022-02-15  5:51 ` [PATCH 3/3] drm/i915: Fix for PHY_MISC_TC1 offset Ramalingam C
2022-02-16  8:16   ` Shankar, Uma
2022-02-16  8:50   ` Ville Syrjälä
2022-02-16  9:36     ` Hogander, Jouni
2022-02-16 10:07       ` Ville Syrjälä
2022-02-16 14:11         ` Hogander, Jouni
2022-02-16 15:01           ` Ville Syrjälä
2022-02-17 12:56             ` [Intel-gfx] " Ville Syrjälä
2022-02-17 20:46       ` Lucas De Marchi
2022-02-17 19:38   ` [Intel-gfx] " Lucas De Marchi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220215055154.15363-2-ramalingam.c@intel.com \
    --to=ramalingam.c@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jose.souza@intel.com \
    --cc=lucas.demarchi@intel.com \
    --cc=swathi.dhanavanthri@intel.com \
    --cc=uma.shankar@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).