From: Lucas Stach <l.stach@pengutronix.de>
To: Philipp Zabel <p.zabel@pengutronix.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
NXP Linux Team <linux-imx@nxp.com>
Cc: devicetree@vger.kernel.org,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Neil Armstrong <narmstrong@baylibre.com>,
Robert Foss <robert.foss@linaro.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>,
dri-devel@lists.freedesktop.org,
Andrzej Hajda <andrzej.hajda@intel.com>,
linux-phy@lists.infradead.org, patchwork-lst@pengutronix.de,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v0 09/10] arm64: dts: imx8mp: add HDMI display pipeline
Date: Wed, 6 Apr 2022 18:01:22 +0200 [thread overview]
Message-ID: <20220406160123.1272911-10-l.stach@pengutronix.de> (raw)
In-Reply-To: <20220406160123.1272911-1-l.stach@pengutronix.de>
This adds the DT nodes for all the peripherals that make up the
HDMI display pipeline.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 80 +++++++++++++++++++++++
1 file changed, 80 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 6b7b5ba32b48..a41da99e9537 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -1087,6 +1087,86 @@ irqsteer_hdmi: interrupt-controller@32fc2000 {
clock-names = "ipg";
power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_IRQSTEER>;
};
+
+ hdmi_pvi: display-bridge@32fc4000 {
+ compatible = "fsl,imx8mp-hdmi-pvi";
+ reg = <0x32fc4000 0x40>;
+ power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ pvi_from_lcdif3: endpoint {
+ remote-endpoint = <&lcdif3_to_pvi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ pvi_to_hdmi_tx: endpoint {
+ remote-endpoint = <&hdmi_tx_from_pvi>;
+ };
+ };
+ };
+ };
+
+ lcdif3: display-controller@32fc6000 {
+ compatible = "fsl,imx8mp-lcdif";
+ reg = <0x32fc6000 0x238>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&irqsteer_hdmi>;
+ clocks = <&hdmi_tx_phy>,
+ <&clk IMX8MP_CLK_HDMI_APB>,
+ <&clk IMX8MP_CLK_HDMI_ROOT>;
+ clock-names = "pix", "axi", "disp_axi";
+ power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_LCDIF>;
+
+ port {
+ lcdif3_to_pvi: endpoint {
+ remote-endpoint = <&pvi_from_lcdif3>;
+ };
+ };
+ };
+
+ hdmi_tx: hdmi@32fd8000 {
+ compatible = "fsl,imx8mp-hdmi";
+ reg = <0x32fd8000 0x7eff>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&irqsteer_hdmi>;
+ clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+ <&clk IMX8MP_CLK_HDMI_REF_266M>,
+ <&clk IMX8MP_CLK_32K>,
+ <&hdmi_tx_phy>;
+ clock-names = "iahb", "isfr", "cec", "pix";
+ assigned-clocks = <&clk IMX8MP_CLK_HDMI_REF_266M>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>;
+ power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>;
+ reg-io-width = <1>;
+ status = "disabled";
+
+ port {
+ hdmi_tx_from_pvi: endpoint {
+ remote-endpoint = <&pvi_to_hdmi_tx>;
+ };
+ };
+ };
+
+ hdmi_tx_phy: phy@32fdff00 {
+ compatible = "fsl,imx8mp-hdmi-phy";
+ reg = <0x32fdff00 0x100>;
+ clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+ <&clk IMX8MP_CLK_HDMI_24M>;
+ clock-names = "apb", "ref";
+ assigned-clocks = <&clk IMX8MP_CLK_HDMI_24M>;
+ assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+ power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX_PHY>;
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
};
gpu3d: gpu@38000000 {
--
2.30.2
next prev parent reply other threads:[~2022-04-06 16:01 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-06 16:01 [PATCH v0 00/10] i.MX8MP HDMI support Lucas Stach
2022-04-06 16:01 ` [PATCH v0 01/10] drm/bridge: dw-hdmi: add low-active PHY reset Lucas Stach
2022-04-07 8:30 ` Neil Armstrong
2022-04-07 8:50 ` Lucas Stach
2022-04-06 16:01 ` [PATCH v0 02/10] dt-bindings: display: imx: add binding for i.MX8MP HDMI TX Lucas Stach
2022-04-06 20:08 ` Rob Herring
2022-04-07 9:15 ` Lucas Stach
2022-04-07 16:59 ` Rob Herring
2022-04-06 16:01 ` [PATCH v0 03/10] drm/imx: add bridge wrapper driver for i.MX8MP DWC HDMI Lucas Stach
2022-04-07 10:02 ` Philipp Zabel
2022-04-06 16:01 ` [PATCH v0 04/10] dt-bindings: display: imx: add binding for i.MX8MP HDMI PVI Lucas Stach
2022-04-06 20:08 ` Rob Herring
2022-04-06 16:01 ` [PATCH v0 05/10] drm/imx: add driver for HDMI TX Parallel Video Interface Lucas Stach
2022-04-07 10:36 ` Philipp Zabel
2022-04-06 16:01 ` [PATCH v0 06/10] dt-bindings: phy: add binding for the i.MX8MP HDMI PHY Lucas Stach
2022-04-06 20:08 ` Rob Herring
2022-04-06 16:01 ` [PATCH v0 07/10] phy: freescale: add Samsung " Lucas Stach
2022-04-07 9:29 ` Philipp Zabel
2022-04-11 11:59 ` Maxime Ripard
2022-04-11 12:20 ` Lucas Stach
2022-04-11 14:07 ` Maxime Ripard
2022-04-06 16:01 ` [PATCH v0 08/10] arm64: dts: imx8mp: add HDMI irqsteer Lucas Stach
2022-04-06 16:01 ` Lucas Stach [this message]
2022-05-31 8:31 ` (EXT) [PATCH v0 09/10] arm64: dts: imx8mp: add HDMI display pipeline Alexander Stein
2022-04-06 16:01 ` [PATCH v0 10/10] arm64: dts: imx8mp-evk: enable HDMI Lucas Stach
2022-04-06 16:10 ` [PATCH v0 00/10] i.MX8MP HDMI support Tim Harvey
2022-04-06 16:27 ` Lucas Stach
2022-04-12 9:18 ` Alexander Stein
2022-04-12 9:41 ` Lucas Stach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220406160123.1272911-10-l.stach@pengutronix.de \
--to=l.stach@pengutronix.de \
--cc=andrzej.hajda@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=kernel@pengutronix.de \
--cc=kishon@ti.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-phy@lists.infradead.org \
--cc=narmstrong@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=patchwork-lst@pengutronix.de \
--cc=robert.foss@linaro.org \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).