dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Lucas Stach <l.stach@pengutronix.de>
To: etnaviv@lists.freedesktop.org
Cc: patchwork-lst@pengutronix.de, kernel@pengutronix.de,
	dri-devel@lists.freedesktop.org,
	Russell King <linux+etnaviv@armlinux.org.uk>
Subject: [PATCH] drm/etnaviv: slow down FE idle polling
Date: Wed,  7 Jun 2023 14:59:32 +0200	[thread overview]
Message-ID: <20230607125932.3518547-1-l.stach@pengutronix.de> (raw)

Currently the FE is spinning way too fast when polling for new work in
the FE idleloop. As each poll fetches 16 bytes from memory, a GPU running
at 1GHz with the current setting of 200 wait cycle between fetches causes
80 MB/s of memory traffic just to check for new work when the GPU is
otherwise idle, which is more FE traffic than in some GPU loaded cases.

Significantly increase the number of wait cycles to slow down the poll
interval to ~30µs, limiting the FE idle memory traffic to 512 KB/s, while
providing a max latency which should not hurt most use-cases. The FE WAIT
command seems to have some unknown discrete steps in the wait cycles so
we may over/undershoot the target a bit, but that should be harmless.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 drivers/gpu/drm/etnaviv/etnaviv_buffer.c | 11 ++++++-----
 drivers/gpu/drm/etnaviv/etnaviv_gpu.c    |  7 +++++++
 drivers/gpu/drm/etnaviv/etnaviv_gpu.h    |  1 +
 3 files changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/etnaviv/etnaviv_buffer.c b/drivers/gpu/drm/etnaviv/etnaviv_buffer.c
index cf741c5c82d2..384df1659be6 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_buffer.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_buffer.c
@@ -53,11 +53,12 @@ static inline void CMD_END(struct etnaviv_cmdbuf *buffer)
 	OUT(buffer, VIV_FE_END_HEADER_OP_END);
 }
 
-static inline void CMD_WAIT(struct etnaviv_cmdbuf *buffer)
+static inline void CMD_WAIT(struct etnaviv_cmdbuf *buffer,
+			    unsigned int waitcycles)
 {
 	buffer->user_size = ALIGN(buffer->user_size, 8);
 
-	OUT(buffer, VIV_FE_WAIT_HEADER_OP_WAIT | 200);
+	OUT(buffer, VIV_FE_WAIT_HEADER_OP_WAIT | waitcycles);
 }
 
 static inline void CMD_LINK(struct etnaviv_cmdbuf *buffer,
@@ -168,7 +169,7 @@ u16 etnaviv_buffer_init(struct etnaviv_gpu *gpu)
 	/* initialize buffer */
 	buffer->user_size = 0;
 
-	CMD_WAIT(buffer);
+	CMD_WAIT(buffer, gpu->fe_waitcycles);
 	CMD_LINK(buffer, 2,
 		 etnaviv_cmdbuf_get_va(buffer, &gpu->mmu_context->cmdbuf_mapping)
 		 + buffer->user_size - 4);
@@ -320,7 +321,7 @@ void etnaviv_sync_point_queue(struct etnaviv_gpu *gpu, unsigned int event)
 	CMD_END(buffer);
 
 	/* Append waitlink */
-	CMD_WAIT(buffer);
+	CMD_WAIT(buffer, gpu->fe_waitcycles);
 	CMD_LINK(buffer, 2,
 		 etnaviv_cmdbuf_get_va(buffer, &gpu->mmu_context->cmdbuf_mapping)
 		 + buffer->user_size - 4);
@@ -503,7 +504,7 @@ void etnaviv_buffer_queue(struct etnaviv_gpu *gpu, u32 exec_state,
 
 	CMD_LOAD_STATE(buffer, VIVS_GL_EVENT, VIVS_GL_EVENT_EVENT_ID(event) |
 		       VIVS_GL_EVENT_FROM_PE);
-	CMD_WAIT(buffer);
+	CMD_WAIT(buffer, gpu->fe_waitcycles);
 	CMD_LINK(buffer, 2,
 		 etnaviv_cmdbuf_get_va(buffer, &gpu->mmu_context->cmdbuf_mapping)
 		 + buffer->user_size - 4);
diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
index 41aab1aa330b..8c20dff32240 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
@@ -493,6 +493,13 @@ static void etnaviv_gpu_update_clock(struct etnaviv_gpu *gpu)
 		clock |= VIVS_HI_CLOCK_CONTROL_FSCALE_VAL(fscale);
 		etnaviv_gpu_load_clock(gpu, clock);
 	}
+
+	/*
+	 * Choose number of wait cycles to target a ~30us (1/32768) max latency
+	 * until new work is picked up by the FE when it polls in the idle loop.
+	 */
+	gpu->fe_waitcycles = min(gpu->base_rate_core >> (15 - gpu->freq_scale),
+				 0xffffUL);
 }
 
 static int etnaviv_hw_reset(struct etnaviv_gpu *gpu)
diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.h b/drivers/gpu/drm/etnaviv/etnaviv_gpu.h
index 98c6f9c320fc..e1e1de59c38d 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.h
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.h
@@ -150,6 +150,7 @@ struct etnaviv_gpu {
 	struct clk *clk_shader;
 
 	unsigned int freq_scale;
+	unsigned int fe_waitcycles;
 	unsigned long base_rate_core;
 	unsigned long base_rate_shader;
 };
-- 
2.39.2


             reply	other threads:[~2023-06-07 12:59 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-07 12:59 Lucas Stach [this message]
2023-06-14 18:37 ` [PATCH] drm/etnaviv: slow down FE idle polling Christian Gmeiner
2023-06-15  4:09 ` Sui Jingfeng
2023-06-15  9:04   ` Lucas Stach
2023-06-15  9:16     ` Sui Jingfeng
2023-06-15  9:20       ` Christian Gmeiner
2023-06-15  9:37         ` Sui Jingfeng
2023-06-15  9:53           ` Lucas Stach
2023-06-15 13:41             ` Chris Healy
2023-06-15 13:51               ` Sui Jingfeng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230607125932.3518547-1-l.stach@pengutronix.de \
    --to=l.stach@pengutronix.de \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=etnaviv@lists.freedesktop.org \
    --cc=kernel@pengutronix.de \
    --cc=linux+etnaviv@armlinux.org.uk \
    --cc=patchwork-lst@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).