Re: [PATCH v3 3/3] drm/msm/dp: check main link status before start aux read

[khsieh@codeaurora.org]

On 2021-04-20 16:38, Stephen Boyd wrote:
> Quoting Kuogee Hsieh (2021-04-16 10:38:51)
>> Maybe when the cable is disconnected the DP phy should be shutdown and
>> some bit in the phy could effectively "cut off" the aux channel and 
>> then
>> NAKs would start coming through here in the DP controller I/O register
>> space. This patch have DP aux channel read/write to return NAK 
>> immediately
>> if DP controller connection status is in unplugged state.
>> 
>> Changes in V3:
>> -- check core_initialized before handle irq_hpd
>> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
>> ---
>>  drivers/gpu/drm/msm/dp/dp_aux.c     |  5 +++++
>>  drivers/gpu/drm/msm/dp/dp_display.c | 14 ++++++++++----
>>  drivers/gpu/drm/msm/dp/dp_link.c    | 20 +++++++++++++++-----
>>  3 files changed, 30 insertions(+), 9 deletions(-)
>> 
>> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c 
>> b/drivers/gpu/drm/msm/dp/dp_aux.c
>> index 7c22bfe..fae3806 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_aux.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
>> @@ -343,6 +343,11 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux 
>> *dp_aux,
>> 
>>         mutex_lock(&aux->mutex);
>> 
>> +       if (!dp_catalog_link_is_connected(aux->catalog)) {
>> +               ret = -ETIMEDOUT;
>> +               goto unlock_exit;
>> +       }
>> +
> 
> This still makes me concerned. Any possibility to not do this and have
> the phy cut the connection off and have this transfer timeout
> immediately?
no, we have to wait hardware AUX_NACK timeout.
only this or the abort flag used last time.
Last time you have kernel crash because of service irq_hpd while clock 
is turned off.
I have add core_initialized checking wiinin irq_hpd to prevent this.
I think abort flag approach is safer.

> 
>>         aux->native = msg->request & (DP_AUX_NATIVE_WRITE & 
>> DP_AUX_NATIVE_READ);
>> 
>>         /* Ignore address only message */
>> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c 
>> b/drivers/gpu/drm/msm/dp/dp_display.c
>> index 1784e11..db3f45e 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_display.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
>> @@ -571,7 +571,7 @@ static int dp_hpd_plug_handle(struct 
>> dp_display_private *dp, u32 data)
>>                 dp->hpd_state = ST_DISCONNECTED;
>> 
>>                 if (ret == -ECONNRESET) { /* cable unplugged */
>> -                       dp->core_initialized = false;
>> +                       DRM_ERROR("dongle unplugged = %d\n", ret);
> 
> Is this a debug message?
> 
>>                 }
>> 
>>         } else {
>> @@ -711,9 +711,15 @@ static int dp_irq_hpd_handle(struct 
>> dp_display_private *dp, u32 data)
>>                 return 0;
>>         }
>> 
>> -       ret = dp_display_usbpd_attention_cb(&dp->pdev->dev);
>> -       if (ret == -ECONNRESET) { /* cable unplugged */
>> -               dp->core_initialized = false;
>> +       /*
>> +        * dp core (ahb/aux clks) must be initialized before
>> +        * irq_hpd be handled
>> +        */
>> +       if (dp->core_initialized) {
>> +               ret = dp_display_usbpd_attention_cb(&dp->pdev->dev);
>> +               if (ret == -ECONNRESET) { /* cable unplugged */
>> +                       DRM_ERROR("dongle unplugged = %d\n", ret);
> 
> Another debug message?
> 
>> +               }
>>         }
>> 
>>         mutex_unlock(&dp->event_mutex);
>> diff --git a/drivers/gpu/drm/msm/dp/dp_link.c 
>> b/drivers/gpu/drm/msm/dp/dp_link.c
>> index be986da..53ecae6 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_link.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_link.c
>> @@ -737,18 +737,25 @@ static int dp_link_parse_sink_count(struct 
>> dp_link *dp_link)
>>         return 0;
>>  }
>> 
>> -static void dp_link_parse_sink_status_field(struct dp_link_private 
>> *link)
>> +static int dp_link_parse_sink_status_field(struct dp_link_private 
>> *link)
>>  {
>>         int len = 0;
>> 
>>         link->prev_sink_count = link->dp_link.sink_count;
>> -       dp_link_parse_sink_count(&link->dp_link);
>> +       len = dp_link_parse_sink_count(&link->dp_link);
>> +       if (len < 0) {
>> +               DRM_ERROR("DP parse sink count failed\n");
>> +               return len;
>> +       }
>> 
>>         len = drm_dp_dpcd_read_link_status(link->aux,
>>                 link->link_status);
>> -       if (len < DP_LINK_STATUS_SIZE)
>> +       if (len < DP_LINK_STATUS_SIZE) {
>>                 DRM_ERROR("DP link status read failed\n");
>> -       dp_link_parse_request(link);
>> +               return len;
>> +       }
>> +
>> +       return dp_link_parse_request(link);
>>  }
>> 
>>  /**
>> @@ -1032,7 +1039,10 @@ int dp_link_process_request(struct dp_link 
>> *dp_link)
>> 
>>         dp_link_reset_data(link);
>> 
>> -       dp_link_parse_sink_status_field(link);
>> +       ret = dp_link_parse_sink_status_field(link);
>> +       if (ret) {
>> +               return ret;
>> +       }
>> 
>>         if (link->request.test_requested == DP_TEST_LINK_EDID_READ) {
>>                 dp_link->sink_request |= DP_TEST_LINK_EDID_READ;
>> --
> 
> Can you split this part off into another patch? It seems to stand on 
> its
> own as it makes the code more robust to transfer errors in the sink
> parsing code.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel