dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Matthias Brugger <matthias.bgg@gmail.com>
To: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Jassi Brar <jassisinghbrar@gmail.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>
Cc: devicetree@vger.kernel.org, wsd_upstream@mediatek.com,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	HS Liao <hs.liao@mediatek.com>,
	linux-mediatek@lists.infradead.org,
	Houlong Wei <houlong.wei@mediatek.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v5 07/13] soc: mediatek: cmdq: add write_s function
Date: Sat, 16 May 2020 20:14:52 +0200	[thread overview]
Message-ID: <58575c2c-0b5a-55c0-f3b0-082bfd4b6144@gmail.com> (raw)
In-Reply-To: <1583664775-19382-8-git-send-email-dennis-yc.hsieh@mediatek.com>



On 08/03/2020 11:52, Dennis YC Hsieh wrote:
> add write_s function in cmdq helper functions which
> writes value contains in internal register to address
> with large dma access support.
> 
> Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
> Reviewed-by: CK Hu <ck.hu@mediatek.com>
> ---
>  drivers/soc/mediatek/mtk-cmdq-helper.c   | 34 +++++++++++++++++++++++-
>  include/linux/mailbox/mtk-cmdq-mailbox.h |  2 ++
>  include/linux/soc/mediatek/mtk-cmdq.h    | 20 ++++++++++++++
>  3 files changed, 55 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index 33153d17c9d9..90f1ff2b4b00 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -18,6 +18,10 @@ struct cmdq_instruction {
>  	union {
>  		u32 value;
>  		u32 mask;
> +		struct {
> +			u16 arg_c;
> +			u16 src_reg;
> +		};
>  	};
>  	union {
>  		u16 offset;
> @@ -29,7 +33,7 @@ struct cmdq_instruction {
>  		struct {
>  			u8 sop:5;
>  			u8 arg_c_t:1;
> -			u8 arg_b_t:1;
> +			u8 src_t:1;

fixing patch 6/13 please. seems the struct should be added in this patch.

>  			u8 dst_t:1;
>  		};
>  	};
> @@ -222,6 +226,34 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
>  }
>  EXPORT_SYMBOL(cmdq_pkt_write_mask);
>  
> +int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> +		     u16 addr_low, u16 src_reg_idx, u32 mask)
> +{
> +	struct cmdq_instruction inst = { {0} };
> +	int err;
> +
> +	if (mask != U32_MAX) {
> +		inst.op = CMDQ_CODE_MASK;
> +		inst.mask = ~mask;
> +		err = cmdq_pkt_append_command(pkt, inst);
> +		if (err < 0)
> +			return err;
> +
> +		inst.mask = 0;
> +		inst.op = CMDQ_CODE_WRITE_S_MASK;
> +	} else {
> +		inst.op = CMDQ_CODE_WRITE_S;
> +	}
> +
> +	inst.src_t = CMDQ_REG_TYPE;

Not defined.
Please make sure that every patch compiles on it's own and does not add a
regression. This is very helpful if we have to bisect the kernel in the future.

> +	inst.sop = high_addr_reg_idx;
> +	inst.offset = addr_low;
> +	inst.src_reg = src_reg_idx;
> +
> +	return cmdq_pkt_append_command(pkt, inst);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_write_s);
> +
>  int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
>  {
>  	struct cmdq_instruction inst = { {0} };
> diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> index 121c3bb6d3de..8ef87e1bd03b 100644
> --- a/include/linux/mailbox/mtk-cmdq-mailbox.h
> +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> @@ -59,6 +59,8 @@ enum cmdq_code {
>  	CMDQ_CODE_JUMP = 0x10,
>  	CMDQ_CODE_WFE = 0x20,
>  	CMDQ_CODE_EOC = 0x40,
> +	CMDQ_CODE_WRITE_S = 0x90,
> +	CMDQ_CODE_WRITE_S_MASK = 0x91,
>  	CMDQ_CODE_LOGIC = 0xa0,
>  };
>  
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> index 83340211e1d3..c72d826d8934 100644
> --- a/include/linux/soc/mediatek/mtk-cmdq.h
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -12,6 +12,8 @@
>  #include <linux/timer.h>
>  
>  #define CMDQ_NO_TIMEOUT		0xffffffffu
> +#define CMDQ_ADDR_HIGH(addr)	((u32)(((addr) >> 16) & GENMASK(31, 0)))
> +#define CMDQ_ADDR_LOW(addr)	((u16)(addr) | BIT(1))
>  
>  struct cmdq_pkt;
>  
> @@ -102,6 +104,24 @@ int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value);
>  int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
>  			u16 offset, u32 value, u32 mask);
>  
> +/**
> + * cmdq_pkt_write_s() - append write_s command to the CMDQ packet
> + * @pkt:	the CMDQ packet
> + * @high_addr_reg_idx:	internal regisger ID which contains high address of pa

s/regisger/register

> + * @addr_low:	low address of pa
> + * @src_reg_idx:	the CMDQ internal register ID which cache source value
> + * @mask:	the specified target address mask, use U32_MAX if no need
> + *
> + * Return: 0 for success; else the error code is returned
> + *
> + * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH()
> + * to get high addrees and call cmdq_pkt_assign() to assign value into internal

s/addrees/address

> + * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameterwhen

s/parameterwhen/parameter when

> + * call to this function.
> + */
> +int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
> +		     u16 addr_low, u16 src_reg_idx, u32 mask);
> +

In general I wonder if we shouldn't provide two functions, one that writes a
mask and on for the else case.

Regards,
Matthias

>  /**
>   * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
>   * @pkt:	the CMDQ packet
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2020-05-16 18:14 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-08 10:52 [PATCH v5 00/13] support gce on mt6779 platform Dennis YC Hsieh
2020-03-08 10:52 ` [PATCH v5 01/13] dt-binding: gce: add gce header file for mt6779 Dennis YC Hsieh
2020-03-08 10:52 ` [PATCH v5 02/13] mailbox: cmdq: variablize address shift in platform Dennis YC Hsieh
2020-03-20  1:05   ` Jassi Brar
2020-03-23  1:11     ` Dennis-YC Hsieh
2020-03-08 10:52 ` [PATCH v5 03/13] mailbox: cmdq: support mt6779 gce platform definition Dennis YC Hsieh
2020-05-16 16:10   ` Matthias Brugger
2020-03-08 10:52 ` [PATCH v5 04/13] mailbox: mediatek: cmdq: clear task in channel before shutdown Dennis YC Hsieh
2020-03-08 10:52 ` [PATCH v5 05/13] soc: mediatek: cmdq: return send msg error code Dennis YC Hsieh
2020-05-16 17:56   ` Matthias Brugger
2020-03-08 10:52 ` [PATCH v5 06/13] soc: mediatek: cmdq: add assign function Dennis YC Hsieh
2020-05-16 17:59   ` Matthias Brugger
2020-05-24 17:01     ` Dennis-YC Hsieh
2020-05-24 18:09       ` Matthias Brugger
2020-03-08 10:52 ` [PATCH v5 07/13] soc: mediatek: cmdq: add write_s function Dennis YC Hsieh
2020-05-16 18:14   ` Matthias Brugger [this message]
2020-05-24 17:26     ` Dennis-YC Hsieh
2020-05-24 18:12       ` Matthias Brugger
2020-03-08 10:52 ` [PATCH v5 08/13] soc: mediatek: cmdq: add read_s function Dennis YC Hsieh
2020-03-08 10:52 ` [PATCH v5 09/13] soc: mediatek: cmdq: add write_s value function Dennis YC Hsieh
2020-05-16 18:20   ` Matthias Brugger
2020-05-24 17:31     ` Dennis-YC Hsieh
2020-05-24 18:13       ` Matthias Brugger
2020-05-25  2:27         ` Dennis-YC Hsieh
2020-05-25  8:39           ` Matthias Brugger
2020-05-25 10:38             ` Dennis-YC Hsieh
2020-05-25 13:59               ` Matthias Brugger
2020-03-08 10:52 ` [PATCH v5 10/13] soc: mediatek: cmdq: export finalize function Dennis YC Hsieh
2020-05-16 18:22   ` Matthias Brugger
2020-05-24 17:32     ` Dennis-YC Hsieh
2020-05-25  0:23     ` Chun-Kuang Hu
2020-05-25  8:38       ` Matthias Brugger
2020-05-25 10:48         ` Chun-Kuang Hu
2020-03-08 10:52 ` [PATCH v5 11/13] soc: mediatek: cmdq: add jump function Dennis YC Hsieh
2020-03-09  1:48   ` CK Hu
2020-03-08 10:52 ` [PATCH v5 12/13] soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api Dennis YC Hsieh
2020-03-09  2:07   ` CK Hu
2020-05-16 18:30   ` Matthias Brugger
2020-05-24 17:32     ` Dennis-YC Hsieh
2020-03-08 10:52 ` [PATCH v5 13/13] soc: mediatek: cmdq: add set event function Dennis YC Hsieh
2020-05-16 18:32   ` Matthias Brugger
2020-05-24 17:39     ` Dennis-YC Hsieh
2020-05-24 18:15       ` Matthias Brugger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=58575c2c-0b5a-55c0-f3b0-082bfd4b6144@gmail.com \
    --to=matthias.bgg@gmail.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=dennis-yc.hsieh@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=houlong.wei@mediatek.com \
    --cc=hs.liao@mediatek.com \
    --cc=jassisinghbrar@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=wsd_upstream@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).