dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Philippe CORNU <philippe.cornu@foss.st.com>
To: Marek Vasut <marex@denx.de>, <dri-devel@lists.freedesktop.org>
Cc: Antonio Borneo <antonio.borneo@foss.st.com>,
	Benjamin Gaignard <benjamin.gaignard@foss.st.com>,
	Yannick Fertre <yannick.fertre@foss.st.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Vincent Abriou <vincent.abriou@foss.st.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Sam Ravnborg <sam@ravnborg.org>,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] drm/stm: Remove usage of drm_display_mode_to_videomode()
Date: Tue, 8 Jun 2021 18:56:23 +0200	[thread overview]
Message-ID: <695b7ef5-480f-dc3e-74f5-99148add22d7@foss.st.com> (raw)
In-Reply-To: <20210607172457.14471-1-marex@denx.de>

Hi Marek,
Applied on drm-misc-next.
Note: I added Yannick Tested-by from the last (identical) December 
version https://patchwork.freedesktop.org/patch/409968
Many thanks for your patch,
Philippe :-)

On 6/7/21 7:24 PM, Marek Vasut wrote:
> There is not much value in the extra conversion step, the calculations
> required for the LTDC IP are different than what is used in the
> drm_display_mode_to_videomode(), so just do the right ones in the LTDC
> driver right away.
> 
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
> Cc: Antonio Borneo <antonio.borneo@foss.st.com>
> Cc: Benjamin Gaignard <benjamin.gaignard@foss.st.com>
> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
> Cc: Philippe Cornu <philippe.cornu@foss.st.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Vincent Abriou <vincent.abriou@foss.st.com>
> Cc: Yannick Fertre <yannick.fertre@foss.st.com>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-stm32@st-md-mailman.stormreply.com
> To: dri-devel@lists.freedesktop.org
> ---
>   drivers/gpu/drm/stm/ltdc.c | 33 +++++++++++++++++----------------
>   1 file changed, 17 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
> index e99771b947b6..08b71248044d 100644
> --- a/drivers/gpu/drm/stm/ltdc.c
> +++ b/drivers/gpu/drm/stm/ltdc.c
> @@ -531,7 +531,6 @@ static void ltdc_crtc_mode_set_nofb(struct drm_crtc *crtc)
>   	struct drm_encoder *encoder = NULL;
>   	struct drm_bridge *bridge = NULL;
>   	struct drm_display_mode *mode = &crtc->state->adjusted_mode;
> -	struct videomode vm;
>   	u32 hsync, vsync, accum_hbp, accum_vbp, accum_act_w, accum_act_h;
>   	u32 total_width, total_height;
>   	u32 bus_flags = 0;
> @@ -570,31 +569,33 @@ static void ltdc_crtc_mode_set_nofb(struct drm_crtc *crtc)
>   		}
>   	}
>   
> -	drm_display_mode_to_videomode(mode, &vm);
> -
>   	DRM_DEBUG_DRIVER("CRTC:%d mode:%s\n", crtc->base.id, mode->name);
> -	DRM_DEBUG_DRIVER("Video mode: %dx%d", vm.hactive, vm.vactive);
> +	DRM_DEBUG_DRIVER("Video mode: %dx%d", mode->hdisplay, mode->vdisplay);
>   	DRM_DEBUG_DRIVER(" hfp %d hbp %d hsl %d vfp %d vbp %d vsl %d\n",
> -			 vm.hfront_porch, vm.hback_porch, vm.hsync_len,
> -			 vm.vfront_porch, vm.vback_porch, vm.vsync_len);
> +			 mode->hsync_start - mode->hdisplay,
> +			 mode->htotal - mode->hsync_end,
> +			 mode->hsync_end - mode->hsync_start,
> +			 mode->vsync_start - mode->vdisplay,
> +			 mode->vtotal - mode->vsync_end,
> +			 mode->vsync_end - mode->vsync_start);
>   
>   	/* Convert video timings to ltdc timings */
> -	hsync = vm.hsync_len - 1;
> -	vsync = vm.vsync_len - 1;
> -	accum_hbp = hsync + vm.hback_porch;
> -	accum_vbp = vsync + vm.vback_porch;
> -	accum_act_w = accum_hbp + vm.hactive;
> -	accum_act_h = accum_vbp + vm.vactive;
> -	total_width = accum_act_w + vm.hfront_porch;
> -	total_height = accum_act_h + vm.vfront_porch;
> +	hsync = mode->hsync_end - mode->hsync_start - 1;
> +	vsync = mode->vsync_end - mode->vsync_start - 1;
> +	accum_hbp = mode->htotal - mode->hsync_start - 1;
> +	accum_vbp = mode->vtotal - mode->vsync_start - 1;
> +	accum_act_w = accum_hbp + mode->hdisplay;
> +	accum_act_h = accum_vbp + mode->vdisplay;
> +	total_width = mode->htotal - 1;
> +	total_height = mode->vtotal - 1;
>   
>   	/* Configures the HS, VS, DE and PC polarities. Default Active Low */
>   	val = 0;
>   
> -	if (vm.flags & DISPLAY_FLAGS_HSYNC_HIGH)
> +	if (mode->flags & DRM_MODE_FLAG_PHSYNC)
>   		val |= GCR_HSPOL;
>   
> -	if (vm.flags & DISPLAY_FLAGS_VSYNC_HIGH)
> +	if (mode->flags & DRM_MODE_FLAG_PVSYNC)
>   		val |= GCR_VSPOL;
>   
>   	if (bus_flags & DRM_BUS_FLAG_DE_LOW)
> 

  reply	other threads:[~2021-06-08 16:56 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-07 17:24 [PATCH] drm/stm: Remove usage of drm_display_mode_to_videomode() Marek Vasut
2021-06-08 16:56 ` Philippe CORNU [this message]
  -- strict thread matches above, loose matches on Subject: below --
2021-05-28  8:05 Yannick Fertre
2021-05-28 14:01 ` yannick Fertre
2021-06-01 10:19   ` Philippe CORNU
2020-12-24  6:20 Marek Vasut
2021-01-07  8:27 ` Yannick FERTRE

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=695b7ef5-480f-dc3e-74f5-99148add22d7@foss.st.com \
    --to=philippe.cornu@foss.st.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=antonio.borneo@foss.st.com \
    --cc=benjamin.gaignard@foss.st.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=marex@denx.de \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=sam@ravnborg.org \
    --cc=vincent.abriou@foss.st.com \
    --cc=yannick.fertre@foss.st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).