dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Agner <stefan@agner.ch>
To: Daniel Vetter <daniel@ffwll.ch>
Cc: Marek Vasut <marex@denx.de>,
	dri-devel@lists.freedesktop.org,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	kernel@pengutronix.de, linux-imx@nxp.com
Subject: Re: [PATCH 02/21] drm: mxsfb: Use drm_panel_bridge
Date: Tue, 02 Jun 2020 16:34:07 +0200	[thread overview]
Message-ID: <6b21148a3047fb2a54a1ae5e19a40f90@agner.ch> (raw)
In-Reply-To: <20200602131237.GC20149@phenom.ffwll.local>

On 2020-06-02 15:12, Daniel Vetter wrote:
> On Sat, May 30, 2020 at 05:14:21AM +0300, Laurent Pinchart wrote:
>> Hi Stefan,
>>
>> On Mon, Mar 23, 2020 at 10:27:21PM +0100, Stefan Agner wrote:
>> > On 2020-03-09 20:51, Laurent Pinchart wrote:
>> > > Replace the manual connector implementation based on drm_panel with the
>> > > drm_panel_bridge helper. This simplifies the mxsfb driver by removing
>> > > connector-related code, and standardizing all pipeline control
>> > > operations on bridges.
>> > >
>> > > A hack is needed to get hold of the connector, as that's our only source
>> > > of bus flags and formats for now. As soon as the bridge API provides us
>> > > with that information this can be fixed.
>> >
>> > This seems like a nice simplification.
>> >
>> > I gave this a go applied on today's drm-misc-next using a Colibri iMX7
>> > (imx7d-colibri-emmc-eval-v3.dts device tree). This device makes use of
>> > the simple panel driver. I get this when booting:
>> >
>> > [    2.976698] [drm] Supports vblank timestamp caching Rev 2
>> > (21.10.2013).
>> > [    2.983526] ------------[ cut here ]------------
>> > [    2.988180] WARNING: CPU: 0 PID: 1 at
>> > drivers/gpu/drm/bridge/panel.c:267 devm_drm_panel_bridge_add+0x25/0x28
>> > [    2.998059] Modules linked in:
>> > [    3.001159] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
>> > 5.6.0-rc5-yocto-standard-01250-ga4ce5db7c9f1 #29
>> > [    3.010493] Hardware name: Freescale i.MX7 Dual (Device Tree)
>> > [    3.016281] [<c010f089>] (unwind_backtrace) from [<c010a9bb>]
>> > (show_stack+0xb/0xc)
>> > [    3.023887] [<c010a9bb>] (show_stack) from [<c08b33cf>]
>> > (dump_stack+0x63/0x70)
>> > [    3.031144] [<c08b33cf>] (dump_stack) from [<c0124385>]
>> > (__warn+0x9d/0xb0)
>> > [    3.038047] [<c0124385>] (__warn) from [<c0124403>]
>> > (warn_slowpath_fmt+0x6b/0x70)
>> > [    3.045564] [<c0124403>] (warn_slowpath_fmt) from [<c04ebf65>]
>> > (devm_drm_panel_bridge_add+0x25/0x28)
>> > [    3.054736] [<c04ebf65>] (devm_drm_panel_bridge_add) from
>> > [<c051fe7f>] (mxsfb_probe+0x197/0x2e0)
>> > [    3.063559] [<c051fe7f>] (mxsfb_probe) from [<c0532e91>]
>> > (platform_drv_probe+0x2d/0x60)
>> > [    3.071598] [<c0532e91>] (platform_drv_probe) from [<c0531615>]
>> > (really_probe+0x1dd/0x330)
>> > [    3.079897] [<c0531615>] (really_probe) from [<c05318b3>]
>> > (driver_probe_device+0x4f/0x154)
>> > [    3.088195] [<c05318b3>] (driver_probe_device) from [<c0531b3f>]
>> > (device_driver_attach+0x37/0x44)
>> > [    3.097101] [<c0531b3f>] (device_driver_attach) from [<c0531bc7>]
>> > (__driver_attach+0x7b/0xec)
>> > [    3.105660] [<c0531bc7>] (__driver_attach) from [<c0530069>]
>> > (bus_for_each_dev+0x3d/0x64)
>> > [    3.113870] [<c0530069>] (bus_for_each_dev) from [<c0530b9b>]
>> > (bus_add_driver+0xef/0x160)
>> > [    3.122081] [<c0530b9b>] (bus_add_driver) from [<c053238d>]
>> > (driver_register+0x35/0x9c)
>> > [    3.130119] [<c053238d>] (driver_register) from [<c0102de9>]
>> > (do_one_initcall+0x3d/0x1e4)
>> > [    3.138333] [<c0102de9>] (do_one_initcall) from [<c1100d13>]
>> > (kernel_init_freeable+0x1b3/0x1fc)
>> > [    3.147069] [<c1100d13>] (kernel_init_freeable) from [<c08c3f7b>]
>> > (kernel_init+0x7/0xd0)
>> > [    3.155194] [<c08c3f7b>] (kernel_init) from [<c01010f9>]
>> > (ret_from_fork+0x11/0x38)
>> > [    3.162789] Exception stack(0xec0e3fb0 to 0xec0e3ff8)
>> > [    3.167862] 3fa0:                                     00000000
>> > 00000000 00000000 00000000
>> > [    3.176071] 3fc0: 00000000 00000000 00000000 00000000 00000000
>> > 00000000 00000000 00000000
>> > [    3.184278] 3fe0: 00000000 00000000 00000000 00000000 00000013
>> > 00000000
>> > [    3.191029] ---[ end trace b69e1f44de470959 ]---
>> > [    3.195671] mxsfb 30730000.lcdif: Cannot connect bridge: -19
>> >
>> > Should we maybe use devm_drm_panel_bridge_add_typed?
>>
>> As Sam reported, this is caused by the panel not setting connector_type.
>> We could use devm_drm_panel_bridge_add_typed(), even if I like the
>> warning as it uncovers the problematic panels and gets them fixed. What
>> would be your preference ?
> 
> Adding warnings everywhere is kinda uncool, at least my experience is that
> if there's too much you get warning overload and train people to ignore
> them.
> 
> Imo either hide the wwarning for now, or if it's not too much work, review
> all the panel drivers and make sure they set the connector type somewhere.
> Warnings are kinda ok once you're pretty sure you got them all, and want
> to make sure newly added drivers get this all right. But not before we've
> reached that.

I am with Daniel on this, too many warnings make users blind of them, so
we should save them when really attention is needed.

I guess the only question which connector type we should default to. I
think DRM_MODE_CONNECTOR_DPI make sense for this IP.

--
Stefan


> 
> Cheers, Daniel
> 
>>
>> > Two more comments below.
>> >
>> > > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>> > > ---
>> > >  drivers/gpu/drm/mxsfb/Makefile    |   2 +-
>> > >  drivers/gpu/drm/mxsfb/mxsfb_drv.c | 105 ++++++++++++++----------------
>> > >  drivers/gpu/drm/mxsfb/mxsfb_drv.h |   5 +-
>> > >  drivers/gpu/drm/mxsfb/mxsfb_out.c |  99 ----------------------------
>> > >  4 files changed, 53 insertions(+), 158 deletions(-)
>> > >  delete mode 100644 drivers/gpu/drm/mxsfb/mxsfb_out.c
>> > >
>> > > diff --git a/drivers/gpu/drm/mxsfb/Makefile b/drivers/gpu/drm/mxsfb/Makefile
>> > > index ff6e358088fa..811584e54ad1 100644
>> > > --- a/drivers/gpu/drm/mxsfb/Makefile
>> > > +++ b/drivers/gpu/drm/mxsfb/Makefile
>> > > @@ -1,3 +1,3 @@
>> > >  # SPDX-License-Identifier: GPL-2.0-only
>> > > -mxsfb-y := mxsfb_drv.o mxsfb_crtc.o mxsfb_out.o
>> > > +mxsfb-y := mxsfb_drv.o mxsfb_crtc.o
>> > >  obj-$(CONFIG_DRM_MXSFB)	+= mxsfb.o
>> > > diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
>> > > b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
>> > > index 2e6068d96034..cffc70257bd3 100644
>> > > --- a/drivers/gpu/drm/mxsfb/mxsfb_drv.c
>> > > +++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.c
>> > > @@ -29,7 +29,6 @@
>> > >  #include <drm/drm_gem_framebuffer_helper.h>
>> > >  #include <drm/drm_irq.h>
>> > >  #include <drm/drm_of.h>
>> > > -#include <drm/drm_panel.h>
>> > >  #include <drm/drm_probe_helper.h>
>> > >  #include <drm/drm_simple_kms_helper.h>
>> > >  #include <drm/drm_vblank.h>
>> > > @@ -100,29 +99,11 @@ static void mxsfb_pipe_enable(struct
>> > > drm_simple_display_pipe *pipe,
>> > >  			      struct drm_crtc_state *crtc_state,
>> > >  			      struct drm_plane_state *plane_state)
>> > >  {
>> > > -	struct drm_connector *connector;
>> > >  	struct mxsfb_drm_private *mxsfb = drm_pipe_to_mxsfb_drm_private(pipe);
>> > >  	struct drm_device *drm = pipe->plane.dev;
>> > >
>> > > -	if (!mxsfb->connector) {
>> > > -		list_for_each_entry(connector,
>> > > -				    &drm->mode_config.connector_list,
>> > > -				    head)
>> > > -			if (connector->encoder == &mxsfb->pipe.encoder) {
>> > > -				mxsfb->connector = connector;
>> > > -				break;
>> > > -			}
>> > > -	}
>> > > -
>> > > -	if (!mxsfb->connector) {
>> > > -		dev_warn(drm->dev, "No connector attached, using default\n");
>> > > -		mxsfb->connector = &mxsfb->panel_connector;
>> > > -	}
>> > > -
>> > >  	pm_runtime_get_sync(drm->dev);
>> > > -	drm_panel_prepare(mxsfb->panel);
>> > >  	mxsfb_crtc_enable(mxsfb);
>> > > -	drm_panel_enable(mxsfb->panel);
>> > >  }
>> > >
>> > >  static void mxsfb_pipe_disable(struct drm_simple_display_pipe *pipe)
>> > > @@ -132,9 +113,7 @@ static void mxsfb_pipe_disable(struct
>> > > drm_simple_display_pipe *pipe)
>> > >  	struct drm_crtc *crtc = &pipe->crtc;
>> > >  	struct drm_pending_vblank_event *event;
>> > >
>> > > -	drm_panel_disable(mxsfb->panel);
>> > >  	mxsfb_crtc_disable(mxsfb);
>> > > -	drm_panel_unprepare(mxsfb->panel);
>> > >  	pm_runtime_put_sync(drm->dev);
>> > >
>> > >  	spin_lock_irq(&drm->event_lock);
>> > > @@ -144,9 +123,6 @@ static void mxsfb_pipe_disable(struct
>> > > drm_simple_display_pipe *pipe)
>> > >  		drm_crtc_send_vblank_event(crtc, event);
>> > >  	}
>> > >  	spin_unlock_irq(&drm->event_lock);
>> > > -
>> > > -	if (mxsfb->connector != &mxsfb->panel_connector)
>> > > -		mxsfb->connector = NULL;
>> > >  }
>> > >
>> > >  static void mxsfb_pipe_update(struct drm_simple_display_pipe *pipe,
>> > > @@ -190,6 +166,48 @@ static struct drm_simple_display_pipe_funcs mxsfb_funcs = {
>> > >  	.disable_vblank	= mxsfb_pipe_disable_vblank,
>> > >  };
>> > >
>> > > +static int mxsfb_attach_bridge(struct mxsfb_drm_private *mxsfb)
>> > > +{
>> > > +	struct drm_device *drm = mxsfb->drm;
>> > > +	struct drm_connector_list_iter iter;
>> > > +	struct drm_panel *panel;
>> > > +	struct drm_bridge *bridge;
>> > > +	int ret;
>> > > +
>> > > +	ret = drm_of_find_panel_or_bridge(drm->dev->of_node, 0, 0, &panel,
>> > > +					  &bridge);
>> > > +	if (ret)
>> > > +		return ret;
>> > > +
>> > > +	if (panel) {
>> > > +		bridge = devm_drm_panel_bridge_add(drm->dev, panel);
>> >
>> > Do we need a select DRM_PANEL_BRIDGE in Kconfig maybe? From what I can
>> > tell there is no devm_drm_panel_bridge_add() stub if DRM_PANEL_BRIDGE is
>> > not selected.
>>
>> You're right, I'll add it.
>>
>> > > +		if (IS_ERR(bridge))
>> > > +			return PTR_ERR(bridge);
>> > > +	}
>> > > +
>> > > +	if (!bridge)
>> > > +		return -ENODEV;
>> > > +
>> > > +	ret = drm_simple_display_pipe_attach_bridge(&mxsfb->pipe, bridge);
>> > > +	if (ret) {
>> > > +		DRM_DEV_ERROR(drm->dev,
>> > > +			      "failed to attach bridge: %d\n", ret);
>> > > +		return ret;
>> > > +	}
>> > > +
>> > > +	mxsfb->bridge = bridge;
>> > > +
>> > > +	/*
>> > > +	 * Get hold of the connector. This is a bit of a hack, until the bridge
>> > > +	 * API gives us bus flags and formats.
>> > > +	 */
>> > > +	drm_connector_list_iter_begin(drm, &iter);
>> > > +	mxsfb->connector = drm_connector_list_iter_next(&iter);
>> > > +	drm_connector_list_iter_end(&iter);
>> >
>> > Could we not just use drm_panel_bridge_connector() here?
>>
>> There's no guarantee that mxsfb->bridge is a panel bridge, the LCDIF
>> output could be connected to another bridge in which case
>> drm_of_find_panel_or_bridge() will set panel to NULL and bridge to a
>> non-NULL value).
>>
>> > > +
>> > > +	return 0;
>> > > +}
>> > > +
>> > >  static int mxsfb_load(struct drm_device *drm, unsigned long flags)
>> > >  {
>> > >  	struct platform_device *pdev = to_platform_device(drm->dev);
>> > > @@ -201,6 +219,7 @@ static int mxsfb_load(struct drm_device *drm,
>> > > unsigned long flags)
>> > >  	if (!mxsfb)
>> > >  		return -ENOMEM;
>> > >
>> > > +	mxsfb->drm = drm;
>> > >  	drm->dev_private = mxsfb;
>> > >  	mxsfb->devdata = &mxsfb_devdata[pdev->id_entry->driver_data];
>> > >
>> > > @@ -236,41 +255,17 @@ static int mxsfb_load(struct drm_device *drm,
>> > > unsigned long flags)
>> > >  	/* Modeset init */
>> > >  	drm_mode_config_init(drm);
>> > >
>> > > -	ret = mxsfb_create_output(drm);
>> > > -	if (ret < 0) {
>> > > -		dev_err(drm->dev, "Failed to create outputs\n");
>> > > -		goto err_vblank;
>> > > -	}
>> > > -
>> > >  	ret = drm_simple_display_pipe_init(drm, &mxsfb->pipe, &mxsfb_funcs,
>> > > -			mxsfb_formats, ARRAY_SIZE(mxsfb_formats), NULL,
>> > > -			mxsfb->connector);
>> > > +			mxsfb_formats, ARRAY_SIZE(mxsfb_formats), NULL, NULL);
>> > >  	if (ret < 0) {
>> > >  		dev_err(drm->dev, "Cannot setup simple display pipe\n");
>> > >  		goto err_vblank;
>> > >  	}
>> > >
>> > > -	/*
>> > > -	 * Attach panel only if there is one.
>> > > -	 * If there is no panel attach, it must be a bridge. In this case, we
>> > > -	 * need a reference to its connector for a proper initialization.
>> > > -	 * We will do this check in pipe->enable(), since the connector won't
>> > > -	 * be attached to an encoder until then.
>> > > -	 */
>> > > -
>> > > -	if (mxsfb->panel) {
>> > > -		ret = drm_panel_attach(mxsfb->panel, mxsfb->connector);
>> > > -		if (ret) {
>> > > -			dev_err(drm->dev, "Cannot connect panel: %d\n", ret);
>> > > -			goto err_vblank;
>> > > -		}
>> > > -	} else if (mxsfb->bridge) {
>> > > -		ret = drm_simple_display_pipe_attach_bridge(&mxsfb->pipe,
>> > > -							    mxsfb->bridge);
>> > > -		if (ret) {
>> > > -			dev_err(drm->dev, "Cannot connect bridge: %d\n", ret);
>> > > -			goto err_vblank;
>> > > -		}
>> > > +	ret = mxsfb_attach_bridge(mxsfb);
>> > > +	if (ret) {
>> > > +		dev_err(drm->dev, "Cannot connect bridge: %d\n", ret);
>> > > +		goto err_vblank;
>> > >  	}
>> > >
>> > >  	drm->mode_config.min_width	= MXSFB_MIN_XRES;
>> > > @@ -288,7 +283,7 @@ static int mxsfb_load(struct drm_device *drm,
>> > > unsigned long flags)
>> > >
>> > >  	if (ret < 0) {
>> > >  		dev_err(drm->dev, "Failed to install IRQ handler\n");
>> > > -		goto err_irq;
>> > > +		goto err_vblank;
>> > >  	}
>> > >
>> > >  	drm_kms_helper_poll_init(drm);
>> > > @@ -299,8 +294,6 @@ static int mxsfb_load(struct drm_device *drm,
>> > > unsigned long flags)
>> > >
>> > >  	return 0;
>> > >
>> > > -err_irq:
>> > > -	drm_panel_detach(mxsfb->panel);
>> > >  err_vblank:
>> > >  	pm_runtime_disable(drm->dev);
>> > >
>> > > diff --git a/drivers/gpu/drm/mxsfb/mxsfb_drv.h
>> > > b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
>> > > index 0b65b5194a9c..0e3e5a63bbf9 100644
>> > > --- a/drivers/gpu/drm/mxsfb/mxsfb_drv.h
>> > > +++ b/drivers/gpu/drm/mxsfb/mxsfb_drv.h
>> > > @@ -8,6 +8,8 @@
>> > >  #ifndef __MXSFB_DRV_H__
>> > >  #define __MXSFB_DRV_H__
>> > >
>> > > +struct drm_device;
>> > > +
>> > >  struct mxsfb_devdata {
>> > >  	unsigned int	 transfer_count;
>> > >  	unsigned int	 cur_buf;
>> > > @@ -26,10 +28,9 @@ struct mxsfb_drm_private {
>> > >  	struct clk			*clk_axi;
>> > >  	struct clk			*clk_disp_axi;
>> > >
>> > > +	struct drm_device		*drm;
>> > >  	struct drm_simple_display_pipe	pipe;
>> > > -	struct drm_connector		panel_connector;
>> > >  	struct drm_connector		*connector;
>> > > -	struct drm_panel		*panel;
>> > >  	struct drm_bridge		*bridge;
>> > >  };
>> > >
>> > > diff --git a/drivers/gpu/drm/mxsfb/mxsfb_out.c
>> > > b/drivers/gpu/drm/mxsfb/mxsfb_out.c
>> > > deleted file mode 100644
>> > > index 9eca1605d11d..000000000000
>> > > --- a/drivers/gpu/drm/mxsfb/mxsfb_out.c
>> > > +++ /dev/null
>> > > @@ -1,99 +0,0 @@
>> > > -// SPDX-License-Identifier: GPL-2.0-or-later
>> > > -/*
>> > > - * Copyright (C) 2016 Marek Vasut <marex@denx.de>
>> > > - */
>> > > -
>> > > -#include <linux/of_graph.h>
>> > > -
>> > > -#include <drm/drm_atomic.h>
>> > > -#include <drm/drm_atomic_helper.h>
>> > > -#include <drm/drm_crtc.h>
>> > > -#include <drm/drm_fb_cma_helper.h>
>> > > -#include <drm/drm_gem_cma_helper.h>
>> > > -#include <drm/drm_of.h>
>> > > -#include <drm/drm_panel.h>
>> > > -#include <drm/drm_plane_helper.h>
>> > > -#include <drm/drm_probe_helper.h>
>> > > -#include <drm/drm_simple_kms_helper.h>
>> > > -
>> > > -#include "mxsfb_drv.h"
>> > > -
>> > > -static struct mxsfb_drm_private *
>> > > -drm_connector_to_mxsfb_drm_private(struct drm_connector *connector)
>> > > -{
>> > > -	return container_of(connector, struct mxsfb_drm_private,
>> > > -			    panel_connector);
>> > > -}
>> > > -
>> > > -static int mxsfb_panel_get_modes(struct drm_connector *connector)
>> > > -{
>> > > -	struct mxsfb_drm_private *mxsfb =
>> > > -			drm_connector_to_mxsfb_drm_private(connector);
>> > > -
>> > > -	if (mxsfb->panel)
>> > > -		return drm_panel_get_modes(mxsfb->panel, connector);
>> > > -
>> > > -	return 0;
>> > > -}
>> > > -
>> > > -static const struct
>> > > -drm_connector_helper_funcs mxsfb_panel_connector_helper_funcs = {
>> > > -	.get_modes = mxsfb_panel_get_modes,
>> > > -};
>> > > -
>> > > -static enum drm_connector_status
>> > > -mxsfb_panel_connector_detect(struct drm_connector *connector, bool force)
>> > > -{
>> > > -	struct mxsfb_drm_private *mxsfb =
>> > > -			drm_connector_to_mxsfb_drm_private(connector);
>> > > -
>> > > -	if (mxsfb->panel)
>> > > -		return connector_status_connected;
>> > > -
>> > > -	return connector_status_disconnected;
>> > > -}
>> > > -
>> > > -static void mxsfb_panel_connector_destroy(struct drm_connector *connector)
>> > > -{
>> > > -	struct mxsfb_drm_private *mxsfb =
>> > > -			drm_connector_to_mxsfb_drm_private(connector);
>> > > -
>> > > -	if (mxsfb->panel)
>> > > -		drm_panel_detach(mxsfb->panel);
>> > > -
>> > > -	drm_connector_unregister(connector);
>> > > -	drm_connector_cleanup(connector);
>> > > -}
>> > > -
>> > > -static const struct drm_connector_funcs mxsfb_panel_connector_funcs = {
>> > > -	.detect			= mxsfb_panel_connector_detect,
>> > > -	.fill_modes		= drm_helper_probe_single_connector_modes,
>> > > -	.destroy		= mxsfb_panel_connector_destroy,
>> > > -	.reset			= drm_atomic_helper_connector_reset,
>> > > -	.atomic_duplicate_state	= drm_atomic_helper_connector_duplicate_state,
>> > > -	.atomic_destroy_state	= drm_atomic_helper_connector_destroy_state,
>> > > -};
>> > > -
>> > > -int mxsfb_create_output(struct drm_device *drm)
>> > > -{
>> > > -	struct mxsfb_drm_private *mxsfb = drm->dev_private;
>> > > -	int ret;
>> > > -
>> > > -	ret = drm_of_find_panel_or_bridge(drm->dev->of_node, 0, 0,
>> > > -					  &mxsfb->panel, &mxsfb->bridge);
>> > > -	if (ret)
>> > > -		return ret;
>> > > -
>> > > -	if (mxsfb->panel) {
>> > > -		mxsfb->connector = &mxsfb->panel_connector;
>> > > -		mxsfb->connector->dpms = DRM_MODE_DPMS_OFF;
>> > > -		mxsfb->connector->polled = 0;
>> > > -		drm_connector_helper_add(mxsfb->connector,
>> > > -					 &mxsfb_panel_connector_helper_funcs);
>> > > -		ret = drm_connector_init(drm, mxsfb->connector,
>> > > -					 &mxsfb_panel_connector_funcs,
>> > > -					 DRM_MODE_CONNECTOR_Unknown);
>> > > -	}
>> > > -
>> > > -	return ret;
>> > > -}
>>
>> --
>> Regards,
>>
>> Laurent Pinchart
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2020-06-02 14:34 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-09 19:51 [PATCH 00/21] drm: mxsfb: Add i.MX7 support Laurent Pinchart
2020-03-09 19:51 ` [PATCH 01/21] drm: mxsfb: Remove fbdev leftovers Laurent Pinchart
2020-03-23 20:23   ` Stefan Agner
2020-03-09 19:51 ` [PATCH 02/21] drm: mxsfb: Use drm_panel_bridge Laurent Pinchart
2020-03-23 21:27   ` Stefan Agner
2020-03-23 21:38     ` Sam Ravnborg
2020-03-23 23:50       ` Stefan Agner
2020-05-30  2:14     ` Laurent Pinchart
2020-06-02 13:12       ` Daniel Vetter
2020-06-02 14:34         ` Stefan Agner [this message]
2020-06-02 17:18           ` Laurent Pinchart
2020-06-02 17:13         ` Laurent Pinchart
2020-06-03  8:16           ` Daniel Vetter
2020-06-04 20:10             ` Sam Ravnborg
2020-03-09 19:51 ` [PATCH 03/21] drm: mxsfb: Use BIT() macro to define register bitfields Laurent Pinchart
2020-03-23 21:34   ` Stefan Agner
2020-03-09 19:51 ` [PATCH 04/21] drm: mxsfb: Remove unused macros from mxsfb_regs.h Laurent Pinchart
2020-03-23 21:36   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 05/21] drm: mxsfb: Clarify format and bus width configuration Laurent Pinchart
2020-03-23 21:42   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 06/21] drm: mxsfb: Pass mxsfb_drm_private pointer to mxsfb_reset_block() Laurent Pinchart
2020-03-23 21:43   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 07/21] drm: mxsfb: Use LCDC_CTRL register name explicitly Laurent Pinchart
2020-03-23 21:48   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 08/21] drm: mxsfb: Remove register definitions from mxsfb_crtc.c Laurent Pinchart
2020-03-23 21:49   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 09/21] drm: mxsfb: Remove unneeded includes Laurent Pinchart
2020-03-23 21:53   ` Stefan Agner
2020-05-30  0:33     ` Laurent Pinchart
2020-03-09 19:52 ` [PATCH 10/21] drm: mxsfb: Stop using DRM simple display pipeline helper Laurent Pinchart
2020-03-23 22:30   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 11/21] drm: mxsfb: Rename mxsfb_crtc.c to mxsfb_kms.c Laurent Pinchart
2020-03-23 22:31   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 12/21] drm: mxsfb: Move vblank event arm to CRTC .atomic_flush() Laurent Pinchart
2020-03-23 22:38   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 13/21] drm: mxsfb: Don't touch AXI clock in IRQ context Laurent Pinchart
2020-03-23 22:50   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 14/21] drm: mxsfb: Enable vblank handling Laurent Pinchart
2020-03-23 23:08   ` Stefan Agner
2020-03-24 10:37     ` Stefan Agner
2020-03-09 19:52 ` [PATCH 15/21] drm: mxsfb: Remove mxsfb_devdata unused fields Laurent Pinchart
2020-03-23 23:15   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 16/21] drm: mxsfb: Add i.MX7 to the list of supported SoCs in Kconfig Laurent Pinchart
2020-03-10 16:28   ` Fabio Estevam
2020-03-10 16:32     ` Laurent Pinchart
2020-03-10 16:37       ` [PATCH v1.1 " Laurent Pinchart
2020-03-23 23:18   ` [PATCH " Stefan Agner
2020-03-09 19:52 ` [PATCH 17/21] drm: mxsfb: Update internal IP version number for i.MX6SX Laurent Pinchart
2020-03-23 23:20   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 18/21] drm: mxsfb: Drop non-OF support Laurent Pinchart
2020-03-23 23:23   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 19/21] drm: mxsfb: Turn mxsfb_set_pixel_fmt() into a void function Laurent Pinchart
2020-03-23 23:28   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 20/21] drm: mxsfb: Merge mxsfb_set_pixel_fmt() and mxsfb_set_bus_fmt() Laurent Pinchart
2020-03-23 23:34   ` Stefan Agner
2020-03-09 19:52 ` [PATCH 21/21] drm: mxsfb: Support the alpha plane Laurent Pinchart
2020-03-23 23:48   ` Stefan Agner
2020-05-30  2:44     ` Laurent Pinchart
2020-03-19  9:36 ` [PATCH 00/21] drm: mxsfb: Add i.MX7 support Laurent Pinchart
2020-04-12 16:37 ` Guido Günther
2020-05-26 15:13 ` Stefan Agner
2020-05-30  0:29   ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6b21148a3047fb2a54a1ae5e19a40f90@agner.ch \
    --to=stefan@agner.ch \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=kernel@pengutronix.de \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-imx@nxp.com \
    --cc=marex@denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).