[PATCHv2 0/6] drm/omap: hdmi: improve hdmi4 CEC, add CEC for hdmi5

[PATCHv2 0/6] drm/omap: hdmi: improve hdmi4 CEC, add CEC for hdmi5

[Hans Verkuil]

This series improves the drm_bridge support for CEC by introducing two
new bridge ops in the first patch, and using those in the second patch.

This makes it possible to call cec_s_conn_info() and set
CEC_CAP_CONNECTOR_INFO for the CEC adapter, so userspace can associate
the CEC adapter with the corresponding DRM connector.

The third patch simplifies CEC physical address handling by using the
cec_s_phys_addr_from_edid helper function that didn't exist when this
code was originally written.

The fourth patch adds the cec clock to ti,omap5-dss.txt.

The fifth patch the missing cec clock to the dra7 and omap5 device tree,
and the last patch adds CEC support to the OMAP5 driver.

Tested with a Pandaboard and a Beagle X15 board.

Regards,

	Hans

Changes since v1:

- as per suggestion from Laurent, changed cec_init/exit to
  connector_attach/_detach which are just called for all
  bridges. The DRM_BRIDGE_OP_CEC was dropped.

- added patch to add the cec clock to ti,omap5-dss.txt

- swapped the order of the last two patches

- incorporated Tomi's suggestions for the hdmi5 CEC support.

Hans Verkuil (6):
  drm: drm_bridge: add connector_attach/detach bridge ops
  drm/omapdrm/dss/hdmi4: switch to the connector bridge ops
  drm/omapdrm/dss/hdmi4: simplify CEC Phys Addr handling
  dt-bindings: display: ti: ti,omap5-dss.txt: add cec clock
  dra7.dtsi/omap5.dtsi: add cec clock
  drm/omapdrm/dss/hdmi5: add CEC support

 .../bindings/display/ti/ti,omap5-dss.txt      |   4 +-
 arch/arm/boot/dts/dra7.dtsi                   |   5 +-
 arch/arm/boot/dts/omap5.dtsi                  |   5 +-
 drivers/gpu/drm/drm_bridge_connector.c        |   9 +
 drivers/gpu/drm/omapdrm/Kconfig               |   8 +
 drivers/gpu/drm/omapdrm/Makefile              |   1 +
 drivers/gpu/drm/omapdrm/dss/hdmi.h            |   1 +
 drivers/gpu/drm/omapdrm/dss/hdmi4.c           |  40 ++--
 drivers/gpu/drm/omapdrm/dss/hdmi4_cec.c       |  13 +-
 drivers/gpu/drm/omapdrm/dss/hdmi4_cec.h       |  12 +-
 drivers/gpu/drm/omapdrm/dss/hdmi5.c           |  63 +++++-
 drivers/gpu/drm/omapdrm/dss/hdmi5_cec.c       | 209 ++++++++++++++++++
 drivers/gpu/drm/omapdrm/dss/hdmi5_cec.h       |  42 ++++
 drivers/gpu/drm/omapdrm/dss/hdmi5_core.c      |  35 ++-
 drivers/gpu/drm/omapdrm/dss/hdmi5_core.h      |  33 ++-
 include/drm/drm_bridge.h                      |  27 +++
 16 files changed, 453 insertions(+), 54 deletions(-)
 create mode 100644 drivers/gpu/drm/omapdrm/dss/hdmi5_cec.c
 create mode 100644 drivers/gpu/drm/omapdrm/dss/hdmi5_cec.h

-- 
2.30.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCHv2 1/6] drm: drm_bridge: add connector_attach/detach bridge ops

[Hans Verkuil]

Add bridge connector_attach/detach ops. These ops are called when a
bridge is attached or detached to a drm_connector. These ops can be
used to register and unregister an HDMI CEC adapter for a bridge that
supports CEC.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
---
 drivers/gpu/drm/drm_bridge_connector.c |  9 +++++++++
 include/drm/drm_bridge.h               | 27 ++++++++++++++++++++++++++
 2 files changed, 36 insertions(+)

diff --git a/drivers/gpu/drm/drm_bridge_connector.c b/drivers/gpu/drm/drm_bridge_connector.c
index 791379816837..07db71d4f5b3 100644
--- a/drivers/gpu/drm/drm_bridge_connector.c
+++ b/drivers/gpu/drm/drm_bridge_connector.c
@@ -203,6 +203,11 @@ static void drm_bridge_connector_destroy(struct drm_connector *connector)
 {
 	struct drm_bridge_connector *bridge_connector =
 		to_drm_bridge_connector(connector);
+	struct drm_bridge *bridge;
+
+	drm_for_each_bridge_in_chain(bridge_connector->encoder, bridge)
+		if (bridge->funcs->connector_detach)
+			bridge->funcs->connector_detach(bridge, connector);
 
 	if (bridge_connector->bridge_hpd) {
 		struct drm_bridge *hpd = bridge_connector->bridge_hpd;
@@ -375,6 +380,10 @@ struct drm_connector *drm_bridge_connector_init(struct drm_device *drm,
 		connector->polled = DRM_CONNECTOR_POLL_CONNECT
 				  | DRM_CONNECTOR_POLL_DISCONNECT;
 
+	drm_for_each_bridge_in_chain(encoder, bridge)
+		if (bridge->funcs->connector_attach)
+			bridge->funcs->connector_attach(bridge, connector);
+
 	return connector;
 }
 EXPORT_SYMBOL_GPL(drm_bridge_connector_init);
diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
index 2195daa289d2..3320a6ebd253 100644
--- a/include/drm/drm_bridge.h
+++ b/include/drm/drm_bridge.h
@@ -629,6 +629,33 @@ struct drm_bridge_funcs {
 	 * the DRM_BRIDGE_OP_HPD flag in their &drm_bridge->ops.
 	 */
 	void (*hpd_disable)(struct drm_bridge *bridge);
+
+	/**
+	 * @connector_attach:
+	 *
+	 * This callback is invoked whenever our bridge is being attached to a
+	 * &drm_connector. This is where an HDMI CEC adapter can be registered.
+	 * Note that this callback expects that this op always succeeds. Since
+	 * HDMI CEC support is an optional feature, any failure to register a
+	 * CEC adapter must be ignored since video output will still work
+	 * without CEC.
+	 *
+	 * The @connector_attach callback is optional.
+	 */
+	void (*connector_attach)(struct drm_bridge *bridge,
+				 struct drm_connector *conn);
+
+	/**
+	 * @connector_detach:
+	 *
+	 * This callback is invoked whenever our bridge is being detached from a
+	 * &drm_connector. This is where an HDMI CEC adapter can be
+	 * unregistered.
+	 *
+	 * The @connector_detach callback is optional.
+	 */
+	void (*connector_detach)(struct drm_bridge *bridge,
+				 struct drm_connector *conn);
 };
 
 /**
-- 
2.30.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCHv2 1/6] drm: drm_bridge: add connector_attach/detach bridge ops

[Tomi Valkeinen]

Hi Hans,

On 02/03/2021 18:23, Hans Verkuil wrote:
> Add bridge connector_attach/detach ops. These ops are called when a
> bridge is attached or detached to a drm_connector. These ops can be
> used to register and unregister an HDMI CEC adapter for a bridge that
> supports CEC.
> 
> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
> ---
>   drivers/gpu/drm/drm_bridge_connector.c |  9 +++++++++
>   include/drm/drm_bridge.h               | 27 ++++++++++++++++++++++++++
>   2 files changed, 36 insertions(+)
> 
> diff --git a/drivers/gpu/drm/drm_bridge_connector.c b/drivers/gpu/drm/drm_bridge_connector.c
> index 791379816837..07db71d4f5b3 100644
> --- a/drivers/gpu/drm/drm_bridge_connector.c
> +++ b/drivers/gpu/drm/drm_bridge_connector.c
> @@ -203,6 +203,11 @@ static void drm_bridge_connector_destroy(struct drm_connector *connector)
>   {
>   	struct drm_bridge_connector *bridge_connector =
>   		to_drm_bridge_connector(connector);
> +	struct drm_bridge *bridge;
> +
> +	drm_for_each_bridge_in_chain(bridge_connector->encoder, bridge)
> +		if (bridge->funcs->connector_detach)
> +			bridge->funcs->connector_detach(bridge, connector);
>   
>   	if (bridge_connector->bridge_hpd) {
>   		struct drm_bridge *hpd = bridge_connector->bridge_hpd;
> @@ -375,6 +380,10 @@ struct drm_connector *drm_bridge_connector_init(struct drm_device *drm,
>   		connector->polled = DRM_CONNECTOR_POLL_CONNECT
>   				  | DRM_CONNECTOR_POLL_DISCONNECT;
>   
> +	drm_for_each_bridge_in_chain(encoder, bridge)
> +		if (bridge->funcs->connector_attach)
> +			bridge->funcs->connector_attach(bridge, connector);
> +
>   	return connector;
>   }
>   EXPORT_SYMBOL_GPL(drm_bridge_connector_init);
> diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
> index 2195daa289d2..3320a6ebd253 100644
> --- a/include/drm/drm_bridge.h
> +++ b/include/drm/drm_bridge.h
> @@ -629,6 +629,33 @@ struct drm_bridge_funcs {
>   	 * the DRM_BRIDGE_OP_HPD flag in their &drm_bridge->ops.
>   	 */
>   	void (*hpd_disable)(struct drm_bridge *bridge);
> +
> +	/**
> +	 * @connector_attach:
> +	 *
> +	 * This callback is invoked whenever our bridge is being attached to a
> +	 * &drm_connector. This is where an HDMI CEC adapter can be registered.
> +	 * Note that this callback expects that this op always succeeds. Since
> +	 * HDMI CEC support is an optional feature, any failure to register a
> +	 * CEC adapter must be ignored since video output will still work
> +	 * without CEC.
> +	 *

Even if CEC support is optional, the callback itself is generic. 
Wouldn't it be better to make this function return an error, and for 
CEC, just return 0 if CEC won't get registered correctly?

Also, I personally like things to fail if something doesn't go right, 
instead of continuing, if that thing is never supposed to happen in 
normal situations. E.g. if CEC registration fails because we're out of 
memory, I think the op should fail too.

  Tomi
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCHv2 1/6] drm: drm_bridge: add connector_attach/detach bridge ops

[Hans Verkuil]

On 16/04/2021 09:46, Tomi Valkeinen wrote:
> Hi Hans,
> 
> On 02/03/2021 18:23, Hans Verkuil wrote:
>> Add bridge connector_attach/detach ops. These ops are called when a
>> bridge is attached or detached to a drm_connector. These ops can be
>> used to register and unregister an HDMI CEC adapter for a bridge that
>> supports CEC.
>>
>> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
>> ---
>>   drivers/gpu/drm/drm_bridge_connector.c |  9 +++++++++
>>   include/drm/drm_bridge.h               | 27 ++++++++++++++++++++++++++
>>   2 files changed, 36 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/drm_bridge_connector.c b/drivers/gpu/drm/drm_bridge_connector.c
>> index 791379816837..07db71d4f5b3 100644
>> --- a/drivers/gpu/drm/drm_bridge_connector.c
>> +++ b/drivers/gpu/drm/drm_bridge_connector.c
>> @@ -203,6 +203,11 @@ static void drm_bridge_connector_destroy(struct drm_connector *connector)
>>   {
>>   	struct drm_bridge_connector *bridge_connector =
>>   		to_drm_bridge_connector(connector);
>> +	struct drm_bridge *bridge;
>> +
>> +	drm_for_each_bridge_in_chain(bridge_connector->encoder, bridge)
>> +		if (bridge->funcs->connector_detach)
>> +			bridge->funcs->connector_detach(bridge, connector);
>>   
>>   	if (bridge_connector->bridge_hpd) {
>>   		struct drm_bridge *hpd = bridge_connector->bridge_hpd;
>> @@ -375,6 +380,10 @@ struct drm_connector *drm_bridge_connector_init(struct drm_device *drm,
>>   		connector->polled = DRM_CONNECTOR_POLL_CONNECT
>>   				  | DRM_CONNECTOR_POLL_DISCONNECT;
>>   
>> +	drm_for_each_bridge_in_chain(encoder, bridge)
>> +		if (bridge->funcs->connector_attach)
>> +			bridge->funcs->connector_attach(bridge, connector);
>> +
>>   	return connector;
>>   }
>>   EXPORT_SYMBOL_GPL(drm_bridge_connector_init);
>> diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
>> index 2195daa289d2..3320a6ebd253 100644
>> --- a/include/drm/drm_bridge.h
>> +++ b/include/drm/drm_bridge.h
>> @@ -629,6 +629,33 @@ struct drm_bridge_funcs {
>>   	 * the DRM_BRIDGE_OP_HPD flag in their &drm_bridge->ops.
>>   	 */
>>   	void (*hpd_disable)(struct drm_bridge *bridge);
>> +
>> +	/**
>> +	 * @connector_attach:
>> +	 *
>> +	 * This callback is invoked whenever our bridge is being attached to a
>> +	 * &drm_connector. This is where an HDMI CEC adapter can be registered.
>> +	 * Note that this callback expects that this op always succeeds. Since
>> +	 * HDMI CEC support is an optional feature, any failure to register a
>> +	 * CEC adapter must be ignored since video output will still work
>> +	 * without CEC.
>> +	 *
> 
> Even if CEC support is optional, the callback itself is generic. 
> Wouldn't it be better to make this function return an error, and for 
> CEC, just return 0 if CEC won't get registered correctly?

I'll do that.

> 
> Also, I personally like things to fail if something doesn't go right, 
> instead of continuing, if that thing is never supposed to happen in 
> normal situations. E.g. if CEC registration fails because we're out of 
> memory, I think the op should fail too.

If that happens you have no video output. And that's a lot more important
than CEC! As you suggested, I'll have the cec connector_attach just return
0.

Regards,

	Hans

> 
>   Tomi
> 

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCHv2 2/6] drm/omapdrm/dss/hdmi4: switch to the connector bridge ops

[Hans Verkuil]

Implement the new connector_attach/detach bridge ops. This makes it
possible to associate a CEC adapter with a drm connector, which helps
userspace determine which cec device node belongs to which drm connector.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
---
 drivers/gpu/drm/omapdrm/dss/hdmi4.c     | 27 +++++++++++++++++--------
 drivers/gpu/drm/omapdrm/dss/hdmi4_cec.c |  9 ++++++---
 drivers/gpu/drm/omapdrm/dss/hdmi4_cec.h |  7 ++++---
 3 files changed, 29 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi4.c b/drivers/gpu/drm/omapdrm/dss/hdmi4.c
index 35b750cebaeb..c387156a5cbb 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi4.c
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi4.c
@@ -482,6 +482,22 @@ static struct edid *hdmi4_bridge_get_edid(struct drm_bridge *bridge,
 	return edid;
 }
 
+static void hdmi4_bridge_connector_attach(struct drm_bridge *bridge,
+					  struct drm_connector *conn)
+{
+	struct omap_hdmi *hdmi = drm_bridge_to_hdmi(bridge);
+
+	hdmi4_cec_init(hdmi->pdev, &hdmi->core, &hdmi->wp, conn);
+}
+
+static void hdmi4_bridge_connector_detach(struct drm_bridge *bridge,
+					  struct drm_connector *conn)
+{
+	struct omap_hdmi *hdmi = drm_bridge_to_hdmi(bridge);
+
+	hdmi4_cec_uninit(&hdmi->core);
+}
+
 static const struct drm_bridge_funcs hdmi4_bridge_funcs = {
 	.attach = hdmi4_bridge_attach,
 	.mode_set = hdmi4_bridge_mode_set,
@@ -492,6 +508,8 @@ static const struct drm_bridge_funcs hdmi4_bridge_funcs = {
 	.atomic_disable = hdmi4_bridge_disable,
 	.hpd_notify = hdmi4_bridge_hpd_notify,
 	.get_edid = hdmi4_bridge_get_edid,
+	.connector_attach = hdmi4_bridge_connector_attach,
+	.connector_detach = hdmi4_bridge_connector_detach,
 };
 
 static void hdmi4_bridge_init(struct omap_hdmi *hdmi)
@@ -647,14 +665,10 @@ static int hdmi4_bind(struct device *dev, struct device *master, void *data)
 	if (r)
 		goto err_runtime_put;
 
-	r = hdmi4_cec_init(hdmi->pdev, &hdmi->core, &hdmi->wp);
-	if (r)
-		goto err_pll_uninit;
-
 	r = hdmi_audio_register(hdmi);
 	if (r) {
 		DSSERR("Registering HDMI audio failed\n");
-		goto err_cec_uninit;
+		goto err_pll_uninit;
 	}
 
 	hdmi->debugfs = dss_debugfs_create_file(dss, "hdmi", hdmi_dump_regs,
@@ -664,8 +678,6 @@ static int hdmi4_bind(struct device *dev, struct device *master, void *data)
 
 	return 0;
 
-err_cec_uninit:
-	hdmi4_cec_uninit(&hdmi->core);
 err_pll_uninit:
 	hdmi_pll_uninit(&hdmi->pll);
 err_runtime_put:
@@ -682,7 +694,6 @@ static void hdmi4_unbind(struct device *dev, struct device *master, void *data)
 	if (hdmi->audio_pdev)
 		platform_device_unregister(hdmi->audio_pdev);
 
-	hdmi4_cec_uninit(&hdmi->core);
 	hdmi_pll_uninit(&hdmi->pll);
 }
 
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi4_cec.c b/drivers/gpu/drm/omapdrm/dss/hdmi4_cec.c
index 43592c1cf081..80ec52c9c846 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi4_cec.c
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi4_cec.c
@@ -335,10 +335,10 @@ void hdmi4_cec_set_phys_addr(struct hdmi_core_data *core, u16 pa)
 }
 
 int hdmi4_cec_init(struct platform_device *pdev, struct hdmi_core_data *core,
-		  struct hdmi_wp_data *wp)
+		   struct hdmi_wp_data *wp, struct drm_connector *conn)
 {
-	const u32 caps = CEC_CAP_TRANSMIT | CEC_CAP_LOG_ADDRS |
-			 CEC_CAP_PASSTHROUGH | CEC_CAP_RC;
+	const u32 caps = CEC_CAP_DEFAULTS | CEC_CAP_CONNECTOR_INFO;
+	struct cec_connector_info conn_info;
 	int ret;
 
 	core->adap = cec_allocate_adapter(&hdmi_cec_adap_ops, core,
@@ -346,6 +346,8 @@ int hdmi4_cec_init(struct platform_device *pdev, struct hdmi_core_data *core,
 	ret = PTR_ERR_OR_ZERO(core->adap);
 	if (ret < 0)
 		return ret;
+	cec_fill_conn_info_from_drm(&conn_info, conn);
+	cec_s_conn_info(core->adap, &conn_info);
 	core->wp = wp;
 
 	/* Disable clock initially, hdmi_cec_adap_enable() manages it */
@@ -354,6 +356,7 @@ int hdmi4_cec_init(struct platform_device *pdev, struct hdmi_core_data *core,
 	ret = cec_register_adapter(core->adap, &pdev->dev);
 	if (ret < 0) {
 		cec_delete_adapter(core->adap);
+		core->adap = NULL;
 		return ret;
 	}
 	return 0;
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi4_cec.h b/drivers/gpu/drm/omapdrm/dss/hdmi4_cec.h
index 0292337c97cc..b59a54c3040e 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi4_cec.h
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi4_cec.h
@@ -29,7 +29,7 @@ struct platform_device;
 void hdmi4_cec_set_phys_addr(struct hdmi_core_data *core, u16 pa);
 void hdmi4_cec_irq(struct hdmi_core_data *core);
 int hdmi4_cec_init(struct platform_device *pdev, struct hdmi_core_data *core,
-		  struct hdmi_wp_data *wp);
+		   struct hdmi_wp_data *wp, struct drm_connector *conn);
 void hdmi4_cec_uninit(struct hdmi_core_data *core);
 #else
 static inline void hdmi4_cec_set_phys_addr(struct hdmi_core_data *core, u16 pa)
@@ -41,8 +41,9 @@ static inline void hdmi4_cec_irq(struct hdmi_core_data *core)
 }
 
 static inline int hdmi4_cec_init(struct platform_device *pdev,
-				struct hdmi_core_data *core,
-				struct hdmi_wp_data *wp)
+				 struct hdmi_core_data *core,
+				 struct hdmi_wp_data *wp,
+				 struct drm_connector *conn)
 {
 	return 0;
 }
-- 
2.30.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCHv2 2/6] drm/omapdrm/dss/hdmi4: switch to the connector bridge ops

[Tomi Valkeinen]

On 02/03/2021 18:23, Hans Verkuil wrote:
> Implement the new connector_attach/detach bridge ops. This makes it
> possible to associate a CEC adapter with a drm connector, which helps
> userspace determine which cec device node belongs to which drm connector.
> 
> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
> ---
>   drivers/gpu/drm/omapdrm/dss/hdmi4.c     | 27 +++++++++++++++++--------
>   drivers/gpu/drm/omapdrm/dss/hdmi4_cec.c |  9 ++++++---
>   drivers/gpu/drm/omapdrm/dss/hdmi4_cec.h |  7 ++++---
>   3 files changed, 29 insertions(+), 14 deletions(-)

Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>

  Tomi
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCHv2 3/6] drm/omapdrm/dss/hdmi4: simplify CEC Phys Addr handling

[Hans Verkuil]

Switch to using cec_s_phys_addr_from_edid() instead of a two-step process
of calling cec_get_edid_phys_addr() followed by cec_s_phys_addr().

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
---
 drivers/gpu/drm/omapdrm/dss/hdmi4.c     | 13 ++-----------
 drivers/gpu/drm/omapdrm/dss/hdmi4_cec.c |  4 ++--
 drivers/gpu/drm/omapdrm/dss/hdmi4_cec.h |  5 +++--
 3 files changed, 7 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi4.c b/drivers/gpu/drm/omapdrm/dss/hdmi4.c
index c387156a5cbb..73f6ed3b75ee 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi4.c
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi4.c
@@ -432,7 +432,7 @@ static void hdmi4_bridge_hpd_notify(struct drm_bridge *bridge,
 	struct omap_hdmi *hdmi = drm_bridge_to_hdmi(bridge);
 
 	if (status == connector_status_disconnected)
-		hdmi4_cec_set_phys_addr(&hdmi->core, CEC_PHYS_ADDR_INVALID);
+		hdmi4_cec_set_phys_addr(&hdmi->core, NULL);
 }
 
 static struct edid *hdmi4_bridge_get_edid(struct drm_bridge *bridge,
@@ -440,7 +440,6 @@ static struct edid *hdmi4_bridge_get_edid(struct drm_bridge *bridge,
 {
 	struct omap_hdmi *hdmi = drm_bridge_to_hdmi(bridge);
 	struct edid *edid = NULL;
-	unsigned int cec_addr;
 	bool need_enable;
 	int r;
 
@@ -466,15 +465,7 @@ static struct edid *hdmi4_bridge_get_edid(struct drm_bridge *bridge,
 	hdmi_runtime_put(hdmi);
 	mutex_unlock(&hdmi->lock);
 
-	if (edid && edid->extensions) {
-		unsigned int len = (edid->extensions + 1) * EDID_LENGTH;
-
-		cec_addr = cec_get_edid_phys_addr((u8 *)edid, len, NULL);
-	} else {
-		cec_addr = CEC_PHYS_ADDR_INVALID;
-	}
-
-	hdmi4_cec_set_phys_addr(&hdmi->core, cec_addr);
+	hdmi4_cec_set_phys_addr(&hdmi->core, edid);
 
 	if (need_enable)
 		hdmi4_core_disable(&hdmi->core);
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi4_cec.c b/drivers/gpu/drm/omapdrm/dss/hdmi4_cec.c
index 80ec52c9c846..cf406d86c845 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi4_cec.c
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi4_cec.c
@@ -329,9 +329,9 @@ static const struct cec_adap_ops hdmi_cec_adap_ops = {
 	.adap_transmit = hdmi_cec_adap_transmit,
 };
 
-void hdmi4_cec_set_phys_addr(struct hdmi_core_data *core, u16 pa)
+void hdmi4_cec_set_phys_addr(struct hdmi_core_data *core, struct edid *edid)
 {
-	cec_s_phys_addr(core->adap, pa, false);
+	cec_s_phys_addr_from_edid(core->adap, edid);
 }
 
 int hdmi4_cec_init(struct platform_device *pdev, struct hdmi_core_data *core,
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi4_cec.h b/drivers/gpu/drm/omapdrm/dss/hdmi4_cec.h
index b59a54c3040e..16bf259643b7 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi4_cec.h
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi4_cec.h
@@ -26,13 +26,14 @@ struct platform_device;
 
 /* HDMI CEC funcs */
 #ifdef CONFIG_OMAP4_DSS_HDMI_CEC
-void hdmi4_cec_set_phys_addr(struct hdmi_core_data *core, u16 pa);
+void hdmi4_cec_set_phys_addr(struct hdmi_core_data *core, struct edid *edid);
 void hdmi4_cec_irq(struct hdmi_core_data *core);
 int hdmi4_cec_init(struct platform_device *pdev, struct hdmi_core_data *core,
 		   struct hdmi_wp_data *wp, struct drm_connector *conn);
 void hdmi4_cec_uninit(struct hdmi_core_data *core);
 #else
-static inline void hdmi4_cec_set_phys_addr(struct hdmi_core_data *core, u16 pa)
+static inline void hdmi4_cec_set_phys_addr(struct hdmi_core_data *core,
+					   struct edid *edid)
 {
 }
 
-- 
2.30.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCHv2 4/6] dt-bindings: display: ti: ti, omap5-dss.txt: add cec clock

[Hans Verkuil]

The cec clock is required as well in order to support HDMI CEC,
document this.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
---
 Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt b/Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt
index 20861218649f..c321c67472f0 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt
+++ b/Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt
@@ -89,8 +89,8 @@ Required properties:
 - interrupts: the HDMI interrupt line
 - ti,hwmods: "dss_hdmi"
 - vdda-supply: vdda power supply
-- clocks: handles to fclk and pll clock
-- clock-names: "fck", "sys_clk"
+- clocks: handles to fclk, pll and cec clock
+- clock-names: "fck", "sys_clk", "cec"
 
 Optional nodes:
 - Video port for HDMI output
-- 
2.30.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCHv2 4/6] dt-bindings: display: ti: ti, omap5-dss.txt: add cec clock

[Tomi Valkeinen]

On 02/03/2021 18:24, Hans Verkuil wrote:
> The cec clock is required as well in order to support HDMI CEC,
> document this.
> 
> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
> ---
>   Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt b/Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt
> index 20861218649f..c321c67472f0 100644
> --- a/Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt
> +++ b/Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt
> @@ -89,8 +89,8 @@ Required properties:
>   - interrupts: the HDMI interrupt line
>   - ti,hwmods: "dss_hdmi"
>   - vdda-supply: vdda power supply
> -- clocks: handles to fclk and pll clock
> -- clock-names: "fck", "sys_clk"
> +- clocks: handles to fclk, pll and cec clock
> +- clock-names: "fck", "sys_clk", "cec"
>   
>   Optional nodes:
>   - Video port for HDMI output
> 

Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>

  Tomi
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCHv2 4/6] dt-bindings: display: ti: ti, omap5-dss.txt: add cec clock

[Rob Herring]

On Tue, 02 Mar 2021 17:24:01 +0100, Hans Verkuil wrote:
> The cec clock is required as well in order to support HDMI CEC,
> document this.
> 
> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
> ---
>  Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCHv2 5/6] dra7.dtsi/omap5.dtsi: add cec clock

[Hans Verkuil]

Add cec clock to the dra7 and omap5 device trees.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/boot/dts/dra7.dtsi  | 5 +++--
 arch/arm/boot/dts/omap5.dtsi | 5 +++--
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index ce1194744f84..efe579ddb324 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -879,8 +879,9 @@ hdmi: encoder@0 {
 						interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 						status = "disabled";
 						clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
-							 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>;
-						clock-names = "fck", "sys_clk";
+							 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>,
+							 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 11>;
+						clock-names = "fck", "sys_clk", "cec";
 						dmas = <&sdma_xbar 76>;
 						dma-names = "audio_tx";
 					};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index e025b7c9a357..6726e1f1b07c 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -586,8 +586,9 @@ hdmi: encoder@0 {
 						interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 						status = "disabled";
 						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
-							 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
-						clock-names = "fck", "sys_clk";
+							 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>,
+							 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 11>;
+						clock-names = "fck", "sys_clk", "cec";
 						dmas = <&sdma 76>;
 						dma-names = "audio_tx";
 					};
-- 
2.30.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCHv2 5/6] dra7.dtsi/omap5.dtsi: add cec clock

[Tomi Valkeinen]

On 02/03/2021 18:24, Hans Verkuil wrote:
> Add cec clock to the dra7 and omap5 device trees.
> 
> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
> Acked-by: Tony Lindgren <tony@atomide.com>
> ---
>   arch/arm/boot/dts/dra7.dtsi  | 5 +++--
>   arch/arm/boot/dts/omap5.dtsi | 5 +++--
>   2 files changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> index ce1194744f84..efe579ddb324 100644
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -879,8 +879,9 @@ hdmi: encoder@0 {
>   						interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
>   						status = "disabled";
>   						clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
> -							 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>;
> -						clock-names = "fck", "sys_clk";
> +							 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>,
> +							 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 11>;
> +						clock-names = "fck", "sys_clk", "cec";
>   						dmas = <&sdma_xbar 76>;
>   						dma-names = "audio_tx";
>   					};
> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> index e025b7c9a357..6726e1f1b07c 100644
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -586,8 +586,9 @@ hdmi: encoder@0 {
>   						interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
>   						status = "disabled";
>   						clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>,
> -							 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
> -						clock-names = "fck", "sys_clk";
> +							 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>,
> +							 <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 11>;
> +						clock-names = "fck", "sys_clk", "cec";
>   						dmas = <&sdma 76>;
>   						dma-names = "audio_tx";
>   					};
> 

Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>

  Tomi

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCHv2 6/6] drm/omapdrm/dss/hdmi5: add CEC support

[Hans Verkuil]

Add HDMI CEC support for OMAP5.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
---
 drivers/gpu/drm/omapdrm/Kconfig          |   8 +
 drivers/gpu/drm/omapdrm/Makefile         |   1 +
 drivers/gpu/drm/omapdrm/dss/hdmi.h       |   1 +
 drivers/gpu/drm/omapdrm/dss/hdmi5.c      |  63 +++++--
 drivers/gpu/drm/omapdrm/dss/hdmi5_cec.c  | 209 +++++++++++++++++++++++
 drivers/gpu/drm/omapdrm/dss/hdmi5_cec.h  |  42 +++++
 drivers/gpu/drm/omapdrm/dss/hdmi5_core.c |  35 +++-
 drivers/gpu/drm/omapdrm/dss/hdmi5_core.h |  33 +++-
 8 files changed, 373 insertions(+), 19 deletions(-)
 create mode 100644 drivers/gpu/drm/omapdrm/dss/hdmi5_cec.c
 create mode 100644 drivers/gpu/drm/omapdrm/dss/hdmi5_cec.h

diff --git a/drivers/gpu/drm/omapdrm/Kconfig b/drivers/gpu/drm/omapdrm/Kconfig
index e7281da5bc6a..08866ac7d869 100644
--- a/drivers/gpu/drm/omapdrm/Kconfig
+++ b/drivers/gpu/drm/omapdrm/Kconfig
@@ -80,6 +80,14 @@ config OMAP5_DSS_HDMI
 	  Definition Multimedia Interface. See http://www.hdmi.org/ for HDMI
 	  specification.
 
+config OMAP5_DSS_HDMI_CEC
+	bool "Enable HDMI CEC support for OMAP5"
+	depends on OMAP5_DSS_HDMI
+	select CEC_CORE
+	default y
+	help
+	  When selected the HDMI transmitter will support the CEC feature.
+
 config OMAP2_DSS_SDI
 	bool "SDI support"
 	default n
diff --git a/drivers/gpu/drm/omapdrm/Makefile b/drivers/gpu/drm/omapdrm/Makefile
index 21e8277ff88f..0732bd2dae1e 100644
--- a/drivers/gpu/drm/omapdrm/Makefile
+++ b/drivers/gpu/drm/omapdrm/Makefile
@@ -29,6 +29,7 @@ omapdrm-$(CONFIG_OMAP2_DSS_HDMI_COMMON) += dss/hdmi_common.o dss/hdmi_wp.o \
 omapdrm-$(CONFIG_OMAP4_DSS_HDMI) += dss/hdmi4.o dss/hdmi4_core.o
 omapdrm-$(CONFIG_OMAP4_DSS_HDMI_CEC) += dss/hdmi4_cec.o
 omapdrm-$(CONFIG_OMAP5_DSS_HDMI) += dss/hdmi5.o dss/hdmi5_core.o
+omapdrm-$(CONFIG_OMAP5_DSS_HDMI_CEC) += dss/hdmi5_cec.o
 ccflags-$(CONFIG_OMAP2_DSS_DEBUG) += -DDEBUG
 
 obj-$(CONFIG_DRM_OMAP) += omapdrm.o
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi.h b/drivers/gpu/drm/omapdrm/dss/hdmi.h
index c4a4e07f0b99..72d8ae441da6 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi.h
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi.h
@@ -261,6 +261,7 @@ struct hdmi_core_data {
 	struct hdmi_wp_data *wp;
 	unsigned int core_pwr_cnt;
 	struct cec_adapter *adap;
+	struct clk *cec_clk;
 };
 
 static inline void hdmi_write_reg(void __iomem *base_addr, const u32 idx,
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi5.c b/drivers/gpu/drm/omapdrm/dss/hdmi5.c
index 65085d886da5..561d57f2dd04 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi5.c
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi5.c
@@ -29,12 +29,14 @@
 #include <linux/of.h>
 #include <linux/of_graph.h>
 #include <sound/omap-hdmi-audio.h>
+#include <media/cec.h>
 
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_state_helper.h>
 
 #include "omapdss.h"
 #include "hdmi5_core.h"
+#include "hdmi5_cec.h"
 #include "dss.h"
 
 static int hdmi_runtime_get(struct omap_hdmi *hdmi)
@@ -105,6 +107,9 @@ static irqreturn_t hdmi_irq_handler(int irq, void *data)
 		hdmi_wp_set_phy_pwr(wp, HDMI_PHYPWRCMD_LDOON);
 	}
 
+	if (irqstatus & HDMI_IRQ_CORE)
+		hdmi5_core_handle_irqs(&hdmi->core);
+
 	return IRQ_HANDLED;
 }
 
@@ -112,9 +117,12 @@ static int hdmi_power_on_core(struct omap_hdmi *hdmi)
 {
 	int r;
 
+	if (hdmi->core.core_pwr_cnt++)
+		return 0;
+
 	r = regulator_enable(hdmi->vdda_reg);
 	if (r)
-		return r;
+		goto err_reg_enable;
 
 	r = hdmi_runtime_get(hdmi);
 	if (r)
@@ -129,12 +137,17 @@ static int hdmi_power_on_core(struct omap_hdmi *hdmi)
 
 err_runtime_get:
 	regulator_disable(hdmi->vdda_reg);
+err_reg_enable:
+	hdmi->core.core_pwr_cnt--;
 
 	return r;
 }
 
 static void hdmi_power_off_core(struct omap_hdmi *hdmi)
 {
+	if (--hdmi->core.core_pwr_cnt)
+		return;
+
 	hdmi->core_enabled = false;
 
 	hdmi_runtime_put(hdmi);
@@ -168,9 +181,9 @@ static int hdmi_power_on_full(struct omap_hdmi *hdmi)
 		pc, &hdmi_cinfo);
 
 	/* disable and clear irqs */
-	hdmi_wp_clear_irqenable(&hdmi->wp, 0xffffffff);
+	hdmi_wp_clear_irqenable(&hdmi->wp, ~HDMI_IRQ_CORE);
 	hdmi_wp_set_irqstatus(&hdmi->wp,
-			hdmi_wp_get_irqstatus(&hdmi->wp));
+			hdmi_wp_get_irqstatus(&hdmi->wp) & ~HDMI_IRQ_CORE);
 
 	r = dss_pll_enable(&hdmi->pll.pll);
 	if (r) {
@@ -225,7 +238,7 @@ static int hdmi_power_on_full(struct omap_hdmi *hdmi)
 
 static void hdmi_power_off_full(struct omap_hdmi *hdmi)
 {
-	hdmi_wp_clear_irqenable(&hdmi->wp, 0xffffffff);
+	hdmi_wp_clear_irqenable(&hdmi->wp, ~HDMI_IRQ_CORE);
 
 	hdmi_wp_video_stop(&hdmi->wp);
 
@@ -273,11 +286,11 @@ static void hdmi_stop_audio_stream(struct omap_hdmi *hd)
 	REG_FLD_MOD(hd->wp.base, HDMI_WP_SYSCONFIG, hd->wp_idlemode, 3, 2);
 }
 
-static int hdmi_core_enable(struct omap_hdmi *hdmi)
+int hdmi5_core_enable(struct omap_hdmi *hdmi)
 {
 	int r = 0;
 
-	DSSDBG("ENTER omapdss_hdmi_core_enable\n");
+	DSSDBG("ENTER %s\n", __func__);
 
 	mutex_lock(&hdmi->lock);
 
@@ -295,9 +308,9 @@ static int hdmi_core_enable(struct omap_hdmi *hdmi)
 	return r;
 }
 
-static void hdmi_core_disable(struct omap_hdmi *hdmi)
+void hdmi5_core_disable(struct omap_hdmi *hdmi)
 {
-	DSSDBG("Enter omapdss_hdmi_core_disable\n");
+	DSSDBG("ENTER %s\n", __func__);
 
 	mutex_lock(&hdmi->lock);
 
@@ -424,6 +437,15 @@ static void hdmi5_bridge_disable(struct drm_bridge *bridge,
 	mutex_unlock(&hdmi->lock);
 }
 
+static void hdmi5_bridge_hpd_notify(struct drm_bridge *bridge,
+				    enum drm_connector_status status)
+{
+	struct omap_hdmi *hdmi = drm_bridge_to_hdmi(bridge);
+
+	if (status == connector_status_disconnected)
+		hdmi5_cec_set_phys_addr(&hdmi->core, NULL);
+}
+
 static struct edid *hdmi5_bridge_get_edid(struct drm_bridge *bridge,
 					  struct drm_connector *connector)
 {
@@ -436,7 +458,7 @@ static struct edid *hdmi5_bridge_get_edid(struct drm_bridge *bridge,
 	need_enable = hdmi->core_enabled == false;
 
 	if (need_enable) {
-		r = hdmi_core_enable(hdmi);
+		r = hdmi5_core_enable(hdmi);
 		if (r)
 			return NULL;
 	}
@@ -460,12 +482,30 @@ static struct edid *hdmi5_bridge_get_edid(struct drm_bridge *bridge,
 	hdmi_runtime_put(hdmi);
 	mutex_unlock(&hdmi->lock);
 
+	hdmi5_cec_set_phys_addr(&hdmi->core, edid);
+
 	if (need_enable)
-		hdmi_core_disable(hdmi);
+		hdmi5_core_disable(hdmi);
 
 	return (struct edid *)edid;
 }
 
+static void hdmi5_bridge_connector_attach(struct drm_bridge *bridge,
+					  struct drm_connector *conn)
+{
+	struct omap_hdmi *hdmi = drm_bridge_to_hdmi(bridge);
+
+	hdmi5_cec_init(hdmi->pdev, &hdmi->core, &hdmi->wp, conn);
+}
+
+static void hdmi5_bridge_connector_detach(struct drm_bridge *bridge,
+					  struct drm_connector *conn)
+{
+	struct omap_hdmi *hdmi = drm_bridge_to_hdmi(bridge);
+
+	hdmi5_cec_uninit(&hdmi->core);
+}
+
 static const struct drm_bridge_funcs hdmi5_bridge_funcs = {
 	.attach = hdmi5_bridge_attach,
 	.mode_set = hdmi5_bridge_mode_set,
@@ -474,7 +514,10 @@ static const struct drm_bridge_funcs hdmi5_bridge_funcs = {
 	.atomic_reset = drm_atomic_helper_bridge_reset,
 	.atomic_enable = hdmi5_bridge_enable,
 	.atomic_disable = hdmi5_bridge_disable,
+	.hpd_notify = hdmi5_bridge_hpd_notify,
 	.get_edid = hdmi5_bridge_get_edid,
+	.connector_attach = hdmi5_bridge_connector_attach,
+	.connector_detach = hdmi5_bridge_connector_detach,
 };
 
 static void hdmi5_bridge_init(struct omap_hdmi *hdmi)
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi5_cec.c b/drivers/gpu/drm/omapdrm/dss/hdmi5_cec.c
new file mode 100644
index 000000000000..cb7ddc5df33d
--- /dev/null
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi5_cec.c
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HDMI CEC
+ *
+ * Copyright 2019 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+
+#include "dss.h"
+#include "hdmi.h"
+#include "hdmi5_core.h"
+#include "hdmi5_cec.h"
+
+static int hdmi5_cec_log_addr(struct cec_adapter *adap, u8 logical_addr)
+{
+	struct hdmi_core_data *core = cec_get_drvdata(adap);
+	u8 v;
+
+	if (logical_addr == CEC_LOG_ADDR_INVALID) {
+		hdmi_write_reg(core->base, HDMI_CORE_CEC_ADDR_L, 0);
+		hdmi_write_reg(core->base, HDMI_CORE_CEC_ADDR_H, 0);
+
+		return 0;
+	}
+
+	if (logical_addr <= 7) {
+		v = hdmi_read_reg(core->base, HDMI_CORE_CEC_ADDR_L);
+		v |= 1 << logical_addr;
+		hdmi_write_reg(core->base, HDMI_CORE_CEC_ADDR_L, v);
+		v = hdmi_read_reg(core->base, HDMI_CORE_CEC_ADDR_H);
+		v |= 1 << 7;
+		hdmi_write_reg(core->base, HDMI_CORE_CEC_ADDR_H, v);
+	} else {
+		v = hdmi_read_reg(core->base, HDMI_CORE_CEC_ADDR_H);
+		v |= 1 << (logical_addr - 8);
+		v |= 1 << 7;
+		hdmi_write_reg(core->base, HDMI_CORE_CEC_ADDR_H, v);
+	}
+
+	return 0;
+}
+
+static int hdmi5_cec_transmit(struct cec_adapter *adap, u8 attempts,
+				u32 signal_free_time, struct cec_msg *msg)
+{
+	struct hdmi_core_data *core = cec_get_drvdata(adap);
+	unsigned int i, ctrl;
+
+	switch (signal_free_time) {
+	case CEC_SIGNAL_FREE_TIME_RETRY:
+		ctrl = CEC_CTRL_RETRY;
+		break;
+	case CEC_SIGNAL_FREE_TIME_NEW_INITIATOR:
+	default:
+		ctrl = CEC_CTRL_NORMAL;
+		break;
+	case CEC_SIGNAL_FREE_TIME_NEXT_XFER:
+		ctrl = CEC_CTRL_IMMED;
+		break;
+	}
+
+	for (i = 0; i < msg->len; i++)
+		hdmi_write_reg(core->base,
+			       HDMI_CORE_CEC_TX_DATA0 + i * 4, msg->msg[i]);
+
+	hdmi_write_reg(core->base, HDMI_CORE_CEC_TX_CNT, msg->len);
+	hdmi_write_reg(core->base, HDMI_CORE_CEC_CTRL,
+		       ctrl | CEC_CTRL_START);
+
+	return 0;
+}
+
+void hdmi5_cec_irq(struct hdmi_core_data *core, unsigned int stat)
+{
+	struct cec_adapter *adap = core->adap;
+
+	if (stat & CEC_STAT_ERROR_INIT)
+		cec_transmit_attempt_done(adap, CEC_TX_STATUS_ERROR);
+	else if (stat & CEC_STAT_DONE)
+		cec_transmit_attempt_done(adap, CEC_TX_STATUS_OK);
+	else if (stat & CEC_STAT_NACK)
+		cec_transmit_attempt_done(adap, CEC_TX_STATUS_NACK);
+
+	if (stat & CEC_STAT_EOM) {
+		struct cec_msg msg = {};
+		unsigned int len, i;
+
+		len = hdmi_read_reg(core->base, HDMI_CORE_CEC_RX_CNT);
+		if (len > sizeof(msg.msg))
+			len = sizeof(msg.msg);
+
+		for (i = 0; i < len; i++)
+			msg.msg[i] =
+				hdmi_read_reg(core->base,
+					      HDMI_CORE_CEC_RX_DATA0 + i * 4);
+
+		hdmi_write_reg(core->base, HDMI_CORE_CEC_LOCK, 0);
+
+		msg.len = len;
+		cec_received_msg(adap, &msg);
+	}
+}
+
+static int hdmi5_cec_enable(struct cec_adapter *adap, bool enable)
+{
+	struct hdmi_core_data *core = cec_get_drvdata(adap);
+	struct omap_hdmi *hdmi = container_of(core, struct omap_hdmi, core);
+	unsigned int irqs;
+	int err;
+
+	if (!enable) {
+		hdmi_write_reg(core->base, HDMI_CORE_CEC_MASK, ~0);
+		hdmi_write_reg(core->base, HDMI_CORE_IH_MUTE_CEC_STAT0, ~0);
+		hdmi_wp_clear_irqenable(core->wp, HDMI_IRQ_CORE);
+		hdmi_wp_set_irqstatus(core->wp, HDMI_IRQ_CORE);
+		REG_FLD_MOD(core->base, HDMI_CORE_MC_CLKDIS, 0x01, 5, 5);
+		hdmi5_core_disable(hdmi);
+
+		return 0;
+	}
+
+	err = hdmi5_core_enable(hdmi);
+	if (err)
+		return err;
+
+	REG_FLD_MOD(core->base, HDMI_CORE_MC_CLKDIS, 0x00, 5, 5);
+	hdmi_write_reg(core->base, HDMI_CORE_IH_I2CM_STAT0, ~0);
+	hdmi_write_reg(core->base, HDMI_CORE_IH_MUTE_I2CM_STAT0, ~0);
+	hdmi_write_reg(core->base, HDMI_CORE_CEC_CTRL, 0);
+	hdmi_write_reg(core->base, HDMI_CORE_IH_CEC_STAT0, ~0);
+	hdmi_write_reg(core->base, HDMI_CORE_CEC_LOCK, 0);
+	hdmi_write_reg(core->base, HDMI_CORE_CEC_TX_CNT, 0);
+
+	hdmi5_cec_log_addr(adap, CEC_LOG_ADDR_INVALID);
+
+	/* Enable HDMI core interrupts */
+	hdmi_wp_set_irqenable(core->wp, HDMI_IRQ_CORE);
+
+	irqs = CEC_STAT_ERROR_INIT | CEC_STAT_NACK | CEC_STAT_EOM |
+	       CEC_STAT_DONE;
+	hdmi_write_reg(core->base, HDMI_CORE_CEC_MASK, ~irqs);
+	hdmi_write_reg(core->base, HDMI_CORE_IH_MUTE_CEC_STAT0, ~irqs);
+
+	return 0;
+}
+
+static const struct cec_adap_ops hdmi5_cec_ops = {
+	.adap_enable = hdmi5_cec_enable,
+	.adap_log_addr = hdmi5_cec_log_addr,
+	.adap_transmit = hdmi5_cec_transmit,
+};
+
+void hdmi5_cec_set_phys_addr(struct hdmi_core_data *core, struct edid *edid)
+{
+	cec_s_phys_addr_from_edid(core->adap, edid);
+}
+
+int hdmi5_cec_init(struct platform_device *pdev, struct hdmi_core_data *core,
+		   struct hdmi_wp_data *wp, struct drm_connector *conn)
+{
+	const u32 caps = CEC_CAP_DEFAULTS | CEC_CAP_CONNECTOR_INFO;
+	struct cec_connector_info conn_info;
+	int ret;
+
+	core->cec_clk = devm_clk_get(&pdev->dev, "cec");
+	if (IS_ERR(core->cec_clk))
+		return PTR_ERR(core->cec_clk);
+	ret = clk_prepare_enable(core->cec_clk);
+	if (ret)
+		return ret;
+
+	core->adap = cec_allocate_adapter(&hdmi5_cec_ops, core,
+					  "omap5", caps, CEC_MAX_LOG_ADDRS);
+	ret = PTR_ERR_OR_ZERO(core->adap);
+	if (ret < 0)
+		goto disable_clk;
+
+	cec_fill_conn_info_from_drm(&conn_info, conn);
+	cec_s_conn_info(core->adap, &conn_info);
+	core->wp = wp;
+
+	ret = cec_register_adapter(core->adap, &pdev->dev);
+	if (ret < 0)
+		goto delete_adap;
+
+	return 0;
+
+delete_adap:
+	cec_delete_adapter(core->adap);
+disable_clk:
+	clk_disable_unprepare(core->cec_clk);
+	core->adap = NULL;
+	return ret;
+}
+
+void hdmi5_cec_uninit(struct hdmi_core_data *core)
+{
+	if (IS_ERR_OR_NULL(core->adap))
+		return;
+
+	cec_unregister_adapter(core->adap);
+	clk_disable_unprepare(core->cec_clk);
+}
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi5_cec.h b/drivers/gpu/drm/omapdrm/dss/hdmi5_cec.h
new file mode 100644
index 000000000000..739d16e90e7e
--- /dev/null
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi5_cec.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * HDMI header definition for OMAP5 HDMI CEC IP
+ *
+ * Copyright 2019 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _HDMI5_CEC_H_
+#define _HDMI5_CEC_H_
+
+/* HDMI CEC funcs */
+#ifdef CONFIG_OMAP5_DSS_HDMI_CEC
+void hdmi5_cec_set_phys_addr(struct hdmi_core_data *core,
+			     struct edid *edid);
+void hdmi5_cec_irq(struct hdmi_core_data *core, unsigned int stat);
+int hdmi5_cec_init(struct platform_device *pdev, struct hdmi_core_data *core,
+		   struct hdmi_wp_data *wp, struct drm_connector *conn);
+void hdmi5_cec_uninit(struct hdmi_core_data *core);
+#else
+static inline void hdmi5_cec_set_phys_addr(struct hdmi_core_data *core,
+					   struct edid *edid)
+{
+}
+
+static inline void hdmi5_cec_irq(struct hdmi_core_data *core, unsigned int stat)
+{
+}
+
+static inline int hdmi5_cec_init(struct platform_device *pdev,
+				struct hdmi_core_data *core,
+				struct hdmi_wp_data *wp,
+				struct drm_connector *conn)
+{
+	return 0;
+}
+
+static inline void hdmi5_cec_uninit(struct hdmi_core_data *core)
+{
+}
+#endif
+
+#endif
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi5_core.c b/drivers/gpu/drm/omapdrm/dss/hdmi5_core.c
index 6cc2ad7a420c..de57384ad159 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi5_core.c
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi5_core.c
@@ -22,6 +22,7 @@
 #include <sound/asoundef.h>
 
 #include "hdmi5_core.h"
+#include "hdmi5_cec.h"
 
 void hdmi5_core_ddc_init(struct hdmi_core_data *core)
 {
@@ -229,6 +230,19 @@ void hdmi5_core_dump(struct hdmi_core_data *core, struct seq_file *s)
 	DUMPCORE(HDMI_CORE_I2CM_FS_SCL_LCNT_1_ADDR);
 	DUMPCORE(HDMI_CORE_I2CM_FS_SCL_LCNT_0_ADDR);
 	DUMPCORE(HDMI_CORE_I2CM_SDA_HOLD_ADDR);
+
+	DUMPCORE(HDMI_CORE_IH_CEC_STAT0);
+	DUMPCORE(HDMI_CORE_IH_MUTE_CEC_STAT0);
+	DUMPCORE(HDMI_CORE_CEC_CTRL);
+	DUMPCORE(HDMI_CORE_CEC_MASK);
+	DUMPCORE(HDMI_CORE_CEC_ADDR_L);
+	DUMPCORE(HDMI_CORE_CEC_ADDR_H);
+	DUMPCORE(HDMI_CORE_CEC_TX_CNT);
+	DUMPCORE(HDMI_CORE_CEC_RX_CNT);
+	DUMPCORE(HDMI_CORE_CEC_TX_DATA0);
+	DUMPCORE(HDMI_CORE_CEC_RX_DATA0);
+	DUMPCORE(HDMI_CORE_CEC_LOCK);
+	DUMPCORE(HDMI_CORE_CEC_WKUPCTRL);
 }
 
 static void hdmi_core_init(struct hdmi_core_vid_config *video_cfg,
@@ -513,8 +527,6 @@ static void hdmi_core_mask_interrupts(struct hdmi_core_data *core)
 	REG_FLD_MOD(base, HDMI_CORE_AUD_INT, 0x3, 3, 2);
 	REG_FLD_MOD(base, HDMI_CORE_AUD_GP_MASK, 0x3, 1, 0);
 
-	REG_FLD_MOD(base, HDMI_CORE_CEC_MASK, 0x7f, 6, 0);
-
 	REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x1, 6, 6);
 	REG_FLD_MOD(base, HDMI_CORE_I2CM_CTLINT, 0x1, 2, 2);
 	REG_FLD_MOD(base, HDMI_CORE_I2CM_INT, 0x1, 2, 2);
@@ -532,8 +544,6 @@ static void hdmi_core_mask_interrupts(struct hdmi_core_data *core)
 
 	REG_FLD_MOD(base, HDMI_CORE_IH_AS_STAT0, 0x7, 2, 0);
 
-	REG_FLD_MOD(base, HDMI_CORE_IH_CEC_STAT0, 0x7f, 6, 0);
-
 	REG_FLD_MOD(base, HDMI_CORE_IH_I2CM_STAT0, 0x3, 1, 0);
 
 	REG_FLD_MOD(base, HDMI_CORE_IH_PHY_STAT0, 0xff, 7, 0);
@@ -548,14 +558,24 @@ static void hdmi_core_enable_interrupts(struct hdmi_core_data *core)
 int hdmi5_core_handle_irqs(struct hdmi_core_data *core)
 {
 	void __iomem *base = core->base;
+	unsigned int stat = hdmi_read_reg(base, HDMI_CORE_IH_CEC_STAT0);
+
+	if (stat) {
+		hdmi_write_reg(base, HDMI_CORE_IH_CEC_STAT0, stat);
+		hdmi5_cec_irq(core, stat);
+	}
 
+	/*
+	 * Clear all possible IRQ_CORE interrupts except for
+	 * HDMI_CORE_IH_I2CM_STAT0 (that interrupt is muted and
+	 * is handled by polling elsewhere) and HDMI_CORE_IH_CEC_STAT0
+	 * which is handled by the CEC code above.
+	 */
 	REG_FLD_MOD(base, HDMI_CORE_IH_FC_STAT0, 0xff, 7, 0);
 	REG_FLD_MOD(base, HDMI_CORE_IH_FC_STAT1, 0xff, 7, 0);
 	REG_FLD_MOD(base, HDMI_CORE_IH_FC_STAT2, 0xff, 7, 0);
 	REG_FLD_MOD(base, HDMI_CORE_IH_AS_STAT0, 0xff, 7, 0);
 	REG_FLD_MOD(base, HDMI_CORE_IH_PHY_STAT0, 0xff, 7, 0);
-	REG_FLD_MOD(base, HDMI_CORE_IH_I2CM_STAT0, 0xff, 7, 0);
-	REG_FLD_MOD(base, HDMI_CORE_IH_CEC_STAT0, 0xff, 7, 0);
 	REG_FLD_MOD(base, HDMI_CORE_IH_VP_STAT0, 0xff, 7, 0);
 	REG_FLD_MOD(base, HDMI_CORE_IH_I2CMPHY_STAT0, 0xff, 7, 0);
 
@@ -879,5 +899,8 @@ int hdmi5_core_init(struct platform_device *pdev, struct hdmi_core_data *core)
 	if (IS_ERR(core->base))
 		return PTR_ERR(core->base);
 
+	REG_FLD_MOD(core->base, HDMI_CORE_CEC_MASK, 0x7f, 6, 0);
+	REG_FLD_MOD(core->base, HDMI_CORE_IH_CEC_STAT0, 0x7f, 6, 0);
+
 	return 0;
 }
diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi5_core.h b/drivers/gpu/drm/omapdrm/dss/hdmi5_core.h
index 070cbf5fb57d..a83b634f6011 100644
--- a/drivers/gpu/drm/omapdrm/dss/hdmi5_core.h
+++ b/drivers/gpu/drm/omapdrm/dss/hdmi5_core.h
@@ -30,8 +30,18 @@
 #define HDMI_CORE_IH_PHY_STAT0			0x00410
 #define HDMI_CORE_IH_I2CM_STAT0			0x00414
 #define HDMI_CORE_IH_CEC_STAT0			0x00418
+#define CEC_STAT_DONE				BIT(0)
+#define CEC_STAT_EOM				BIT(1)
+#define CEC_STAT_NACK				BIT(2)
+#define CEC_STAT_ARBLOST			BIT(3)
+#define CEC_STAT_ERROR_INIT			BIT(4)
+#define CEC_STAT_ERROR_FOLL			BIT(5)
+#define CEC_STAT_WAKEUP				BIT(6)
+
 #define HDMI_CORE_IH_VP_STAT0			0x0041C
 #define HDMI_CORE_IH_I2CMPHY_STAT0		0x00420
+#define HDMI_CORE_IH_MUTE_I2CM_STAT0            0x00614
+#define HDMI_CORE_IH_MUTE_CEC_STAT0		0x00618
 #define HDMI_CORE_IH_MUTE			0x007FC
 
 /* HDMI Video Sampler */
@@ -233,9 +243,6 @@
 /* HDMI HDCP */
 #define HDMI_CORE_HDCP_MASK			0x14020
 
-/* HDMI CEC */
-#define HDMI_CORE_CEC_MASK			0x17408
-
 /* HDMI I2C Master */
 #define HDMI_CORE_I2CM_SLAVE			0x157C8
 #define HDMI_CORE_I2CM_ADDRESS			0x157CC
@@ -258,6 +265,24 @@
 #define HDMI_CORE_I2CM_FS_SCL_LCNT_0_ADDR	0x15810
 #define HDMI_CORE_I2CM_SDA_HOLD_ADDR		0x15814
 
+/* HDMI CEC */
+#define HDMI_CORE_CEC_CTRL			0x153C8
+#define CEC_CTRL_START				BIT(0)
+#define CEC_CTRL_FRAME_TYP			(3 << 1)
+#define CEC_CTRL_RETRY				(0 << 1)
+#define CEC_CTRL_NORMAL				(1 << 1)
+#define CEC_CTRL_IMMED				(2 << 1)
+
+#define HDMI_CORE_CEC_MASK			0x153D0
+#define HDMI_CORE_CEC_ADDR_L			0x153DC
+#define HDMI_CORE_CEC_ADDR_H			0x153E0
+#define HDMI_CORE_CEC_TX_CNT			0x153E4
+#define HDMI_CORE_CEC_RX_CNT			0x153E8
+#define HDMI_CORE_CEC_TX_DATA0			0x15408
+#define HDMI_CORE_CEC_RX_DATA0			0x15448
+#define HDMI_CORE_CEC_LOCK			0x15488
+#define HDMI_CORE_CEC_WKUPCTRL			0x1548C
+
 enum hdmi_core_packet_mode {
 	HDMI_PACKETMODERESERVEDVALUE = 0,
 	HDMI_PACKETMODE24BITPERPIXEL = 4,
@@ -290,6 +315,8 @@ int hdmi5_core_handle_irqs(struct hdmi_core_data *core);
 void hdmi5_configure(struct hdmi_core_data *core, struct hdmi_wp_data *wp,
 			struct hdmi_config *cfg);
 int hdmi5_core_init(struct platform_device *pdev, struct hdmi_core_data *core);
+int hdmi5_core_enable(struct omap_hdmi *hdmi);
+void hdmi5_core_disable(struct omap_hdmi *hdmi);
 
 int hdmi5_audio_config(struct hdmi_core_data *core, struct hdmi_wp_data *wp,
 			struct omap_dss_audio *audio, u32 pclk);
-- 
2.30.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCHv2 6/6] drm/omapdrm/dss/hdmi5: add CEC support

[Tomi Valkeinen]

On 02/03/2021 18:24, Hans Verkuil wrote:
> Add HDMI CEC support for OMAP5.
> 
> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
> ---
>   drivers/gpu/drm/omapdrm/Kconfig          |   8 +
>   drivers/gpu/drm/omapdrm/Makefile         |   1 +
>   drivers/gpu/drm/omapdrm/dss/hdmi.h       |   1 +
>   drivers/gpu/drm/omapdrm/dss/hdmi5.c      |  63 +++++--
>   drivers/gpu/drm/omapdrm/dss/hdmi5_cec.c  | 209 +++++++++++++++++++++++
>   drivers/gpu/drm/omapdrm/dss/hdmi5_cec.h  |  42 +++++
>   drivers/gpu/drm/omapdrm/dss/hdmi5_core.c |  35 +++-
>   drivers/gpu/drm/omapdrm/dss/hdmi5_core.h |  33 +++-
>   8 files changed, 373 insertions(+), 19 deletions(-)
>   create mode 100644 drivers/gpu/drm/omapdrm/dss/hdmi5_cec.c
>   create mode 100644 drivers/gpu/drm/omapdrm/dss/hdmi5_cec.h

<snip>

> diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi5_core.h b/drivers/gpu/drm/omapdrm/dss/hdmi5_core.h
> index 070cbf5fb57d..a83b634f6011 100644
> --- a/drivers/gpu/drm/omapdrm/dss/hdmi5_core.h
> +++ b/drivers/gpu/drm/omapdrm/dss/hdmi5_core.h
> @@ -30,8 +30,18 @@
>   #define HDMI_CORE_IH_PHY_STAT0			0x00410
>   #define HDMI_CORE_IH_I2CM_STAT0			0x00414
>   #define HDMI_CORE_IH_CEC_STAT0			0x00418
> +#define CEC_STAT_DONE				BIT(0)
> +#define CEC_STAT_EOM				BIT(1)
> +#define CEC_STAT_NACK				BIT(2)
> +#define CEC_STAT_ARBLOST			BIT(3)
> +#define CEC_STAT_ERROR_INIT			BIT(4)
> +#define CEC_STAT_ERROR_FOLL			BIT(5)
> +#define CEC_STAT_WAKEUP				BIT(6)
> +
>   #define HDMI_CORE_IH_VP_STAT0			0x0041C
>   #define HDMI_CORE_IH_I2CMPHY_STAT0		0x00420
> +#define HDMI_CORE_IH_MUTE_I2CM_STAT0            0x00614

The line above has indentation in spaces, but everything else uses tabs.

Other than that:

Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>

  Tomi
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCHv2 6/6] drm/omapdrm/dss/hdmi5: add CEC support

[Hans Verkuil]

On 03/03/2021 08:47, Tomi Valkeinen wrote:
> On 02/03/2021 18:24, Hans Verkuil wrote:
>> Add HDMI CEC support for OMAP5.
>>
>> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
>> ---
>>   drivers/gpu/drm/omapdrm/Kconfig          |   8 +
>>   drivers/gpu/drm/omapdrm/Makefile         |   1 +
>>   drivers/gpu/drm/omapdrm/dss/hdmi.h       |   1 +
>>   drivers/gpu/drm/omapdrm/dss/hdmi5.c      |  63 +++++--
>>   drivers/gpu/drm/omapdrm/dss/hdmi5_cec.c  | 209 +++++++++++++++++++++++
>>   drivers/gpu/drm/omapdrm/dss/hdmi5_cec.h  |  42 +++++
>>   drivers/gpu/drm/omapdrm/dss/hdmi5_core.c |  35 +++-
>>   drivers/gpu/drm/omapdrm/dss/hdmi5_core.h |  33 +++-
>>   8 files changed, 373 insertions(+), 19 deletions(-)
>>   create mode 100644 drivers/gpu/drm/omapdrm/dss/hdmi5_cec.c
>>   create mode 100644 drivers/gpu/drm/omapdrm/dss/hdmi5_cec.h
> 
> <snip>
> 
>> diff --git a/drivers/gpu/drm/omapdrm/dss/hdmi5_core.h b/drivers/gpu/drm/omapdrm/dss/hdmi5_core.h
>> index 070cbf5fb57d..a83b634f6011 100644
>> --- a/drivers/gpu/drm/omapdrm/dss/hdmi5_core.h
>> +++ b/drivers/gpu/drm/omapdrm/dss/hdmi5_core.h
>> @@ -30,8 +30,18 @@
>>   #define HDMI_CORE_IH_PHY_STAT0			0x00410
>>   #define HDMI_CORE_IH_I2CM_STAT0			0x00414
>>   #define HDMI_CORE_IH_CEC_STAT0			0x00418
>> +#define CEC_STAT_DONE				BIT(0)
>> +#define CEC_STAT_EOM				BIT(1)
>> +#define CEC_STAT_NACK				BIT(2)
>> +#define CEC_STAT_ARBLOST			BIT(3)
>> +#define CEC_STAT_ERROR_INIT			BIT(4)
>> +#define CEC_STAT_ERROR_FOLL			BIT(5)
>> +#define CEC_STAT_WAKEUP				BIT(6)
>> +
>>   #define HDMI_CORE_IH_VP_STAT0			0x0041C
>>   #define HDMI_CORE_IH_I2CMPHY_STAT0		0x00420
>> +#define HDMI_CORE_IH_MUTE_I2CM_STAT0            0x00614
> 
> The line above has indentation in spaces, but everything else uses tabs.

Well spotted!

I've fixed that in my tree.

> 
> Other than that:
> 
> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>

Thanks!

	Hans

> 
>   Tomi
> 

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel