Hi Am 07.07.20 um 18:40 schrieb Lyude Paul: > For context - I already reviewed this once, it just missed the dri-devel list by > accident > > For the whole series: > > Reviewed-by: Lyude Paul I pushed the patches into drm-misc-next and also added a comment in the commit message on the busy-waiting thing you asked about. Best regards Thomas > > On Tue, 2020-07-07 at 10:24 +0200, Thomas Zimmermann wrote: >> Mgag200's modesetting still utilizes the prepare and commit functions >> that were part of the non-atomic interface. This patchset integrates >> them into the simple-display's enable function. >> >> Patch 1 disables CRTC write protection once when initializing the >> registers. Before, CRTC registers were temporarily write-protected for >> no apparent reason. >> >> The screen is toggled on and off multiple times while setting a mode. >> Patch 3 removes any intermediate screen on/off changes. >> >> In patch 4, DPMS functionality is reduced to on an off. The DPMS helper >> function implemements on, off, suspend and standby. In atomic modesetting, >> only on and off is required. >> >> Tested on G200SE HW with Xorg, Weston and fbdev. >> >> Thomas Zimmermann (7): >> drm/mgag200: Don't write-protect CRTC 0-7 while in mga_crtc_prepare() >> drm/mgag200: Move PLL setup out of mode-setting function >> drm/mgag200: Don't set or clear field during modeset >> drm/mgag200: Split DPMS function into helpers >> drm/mgag200: Set/clear field in display enable/disable >> helpers >> drm/mgag200: Rename G200WB prepare/commit function >> drm/mgag200: Inline mga_crtc_{prepare,commit}() into enable function >> >> drivers/gpu/drm/mgag200/mgag200_drv.h | 6 + >> drivers/gpu/drm/mgag200/mgag200_mode.c | 168 +++++++++---------------- >> drivers/gpu/drm/mgag200/mgag200_reg.h | 11 ++ >> 3 files changed, 76 insertions(+), 109 deletions(-) >> >> -- >> 2.27.0 >> > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel > -- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany (HRB 36809, AG Nürnberg) Geschäftsführer: Felix Imendörffer