From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.8 required=3.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS, UNPARSEABLE_RELAY autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 272ADC4CECC for ; Mon, 27 Apr 2020 18:25:31 +0000 (UTC) Received: from gabe.freedesktop.org (gabe.freedesktop.org [131.252.210.177]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 00C0E214AF for ; Mon, 27 Apr 2020 18:25:30 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 00C0E214AF Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=collabora.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=dri-devel-bounces@lists.freedesktop.org Received: from gabe.freedesktop.org (localhost [127.0.0.1]) by gabe.freedesktop.org (Postfix) with ESMTP id 5E16B6E03A; Mon, 27 Apr 2020 18:25:30 +0000 (UTC) Received: from bhuna.collabora.co.uk (bhuna.collabora.co.uk [IPv6:2a00:1098:0:82:1000:25:2eeb:e3e3]) by gabe.freedesktop.org (Postfix) with ESMTPS id 26D676E03A for ; Mon, 27 Apr 2020 18:25:29 +0000 (UTC) Received: from [127.0.0.1] (localhost [127.0.0.1]) (Authenticated sender: aratiu) with ESMTPSA id C44D12A0C8B From: Adrian Ratiu To: Enric Balletbo i Serra , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-rockchip@lists.infradead.org, Laurent Pinchart Subject: Re: [PATCH v8 05/10] drm: imx: Add i.MX 6 MIPI DSI host platform driver In-Reply-To: <26ac2e23-f678-0c12-9a0d-d09fcb236e44@collabora.com> References: <20200427081952.3536741-1-adrian.ratiu@collabora.com> <20200427081952.3536741-6-adrian.ratiu@collabora.com> <26ac2e23-f678-0c12-9a0d-d09fcb236e44@collabora.com> Date: Mon, 27 Apr 2020 21:26:26 +0300 Message-ID: <87sggoiy3x.fsf@collabora.com> MIME-Version: 1.0 X-BeenThere: dri-devel@lists.freedesktop.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Direct Rendering Infrastructure - Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Jernej Skrabec , Adrian Pop , Jonas Karlman , Martyn Welch , Sjoerd Simons , linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, Andrzej Hajda , linux-imx@nxp.com, kernel@collabora.com, linux-stm32@st-md-mailman.stormreply.com, Arnaud Ferraris , Emil Velikov Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="us-ascii"; Format="flowed" Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" Hi Enric, Thank you very much for your review, comments below. I'll leave this a bit more on review before resending with your suggested fixes. On Mon, 27 Apr 2020, Enric Balletbo i Serra wrote: > Hi Adrian > > Thank you for your patch. > > On 27/4/20 10:19, Adrian Ratiu wrote: >> This adds support for the Synopsis DesignWare MIPI DSI v1.01 >> host controller which is embedded in i.MX 6 SoCs. Based on >> following patches, but updated/extended to work with existing >> support found in the kernel: - drm: imx: Support Synopsys >> DesignWare MIPI DSI host controller >> Signed-off-by: Liu Ying >> Cc: Fabio Estevam Cc: Enric Balletbo >> Serra Reviewed-by: Emil Velikov >> Tested-by: Adrian Pop >> Tested-by: Arnaud Ferraris >> Signed-off-by: Sjoerd Simons >> Signed-off-by: Martyn Welch >> Signed-off-by: Adrian Ratiu >> --- Changes since v7: >> - Removed encoder helper ops and added drm_bridge (Laurent) - >> Brought back drm_simple_encoder_init and dropped dependency >> on external unify encoder creation patch (Laurent) - Minor >> typo fixes >> Changes since v6: >> - Replaced custom noop encoder with the simple drm encoder >> (Enric) - Added CONFIG_DRM_IMX6_MIPI_DSI depends on CONFIG_OF >> (Enric) - Dropped imx_mipi_dsi_register() because now it only >> creates the dummy encoder which can easily be done directly >> in imx_dsi_bind() >> Changes since v5: >> - Reword to remove unrelated device tree patch mention >> (Fabio) - Move pllref_clk enable/disable to bind/unbind >> (Ezequiel) - Fix freescale.com -> nxp.com email addresses >> (Fabio) - Also added myself as module author (Fabio) - Use >> DRM_DEV_* macros for consistency, print more error msg >> Changes since v4: >> - Split off driver-specific configuration of phy timings due >> to new upstream API. - Move regmap infrastructure logic to >> separate commit (Ezequiel) - Move dsi v1.01 layout addition >> to a separate commit (Ezequiel) - Minor warnings and driver >> name fixes >> Changes since v3: >> - Renamed platform driver to reflect it's i.MX6 only. (Fabio) >> Changes since v2: >> - Fixed commit tags. (Emil) >> Changes since v1: >> - Moved register definitions & regmap initialization into >> bridge module. Platform drivers get the regmap via plat_data >> after calling the bridge probe. (Emil) >> --- >> drivers/gpu/drm/imx/Kconfig | 8 + >> drivers/gpu/drm/imx/Makefile | 1 + >> drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c | 399 >> +++++++++++++++++++++++++ 3 files changed, 408 insertions(+) >> create mode 100644 drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c >> diff --git a/drivers/gpu/drm/imx/Kconfig >> b/drivers/gpu/drm/imx/Kconfig index >> 207bf7409dfba..0dffc72df7922 100644 --- >> a/drivers/gpu/drm/imx/Kconfig +++ b/drivers/gpu/drm/imx/Kconfig >> @@ -39,3 +39,11 @@ config DRM_IMX_HDMI >> depends on DRM_IMX help Choose this if you want to use >> HDMI on i.MX6. >> + +config DRM_IMX6_MIPI_DSI + tristate "Freescale i.MX6 >> DRM MIPI DSI" + select DRM_DW_MIPI_DSI + depends on >> DRM_IMX + depends on OF + help + Choose this if you want >> to use MIPI DSI on i.MX6. diff --git >> a/drivers/gpu/drm/imx/Makefile b/drivers/gpu/drm/imx/Makefile >> index 21cdcc2faabc8..9a7843c593478 100644 --- >> a/drivers/gpu/drm/imx/Makefile +++ >> b/drivers/gpu/drm/imx/Makefile @@ -9,3 +9,4 @@ >> obj-$(CONFIG_DRM_IMX_TVE) += imx-tve.o >> obj-$(CONFIG_DRM_IMX_LDB) += imx-ldb.o >> obj-$(CONFIG_DRM_IMX_HDMI) += dw_hdmi-imx.o >> +obj-$(CONFIG_DRM_IMX6_MIPI_DSI) += dw_mipi_dsi-imx6.o diff >> --git a/drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c >> b/drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c new file mode 100644 >> index 0000000000000..492decc418bc3 --- /dev/null +++ >> b/drivers/gpu/drm/imx/dw_mipi_dsi-imx6.c @@ -0,0 +1,399 @@ +// >> SPDX-License-Identifier: GPL-2.0+ +/* + * i.MX6 drm driver - >> MIPI DSI Host Controller + * + * Copyright (C) 2011-2015 >> Freescale Semiconductor, Inc. + * Copyright (C) 2019-2020 >> Collabora, Ltd. + */ + +#include +#include >> +#include +#include >> +#include >> +#include +#include >> +#include +#include >> +#include >> +#include >> +#include >> +#include +#include +#include >> + +#include "imx-drm.h" + >> +#define DSI_PWR_UP 0x04 +#define RESET >> 0 +#define POWERUP BIT(0) + +#define >> DSI_PHY_IF_CTRL 0x5c +#define >> PHY_IF_CTRL_RESET 0x0 + +#define DSI_PHY_TST_CTRL0 >> 0x64 +#define PHY_TESTCLK BIT(1) +#define >> PHY_UNTESTCLK 0 +#define PHY_TESTCLR >> BIT(0) +#define PHY_UNTESTCLR 0 + >> +#define DSI_PHY_TST_CTRL1 0x68 +#define PHY_TESTEN >> BIT(16) +#define PHY_UNTESTEN 0 +#define >> PHY_TESTDOUT(n) (((n) & 0xff) << 8) >> +#define PHY_TESTDIN(n) (((n) & 0xff) << >> 0) + +struct imx_mipi_dsi { + struct drm_encoder >> encoder; + struct drm_bridge bridge; + struct device >> *dev; + struct regmap *mux_sel; + struct dw_mipi_dsi >> *mipi_dsi; + struct clk *pllref_clk; + + void __iomem >> *base; + unsigned int lane_mbps; +}; + +struct >> dphy_pll_testdin_map { + unsigned int max_mbps; + u8 >> testdin; +}; + +/* The table is based on 27MHz DPHY pll >> reference clock. */ +static const struct dphy_pll_testdin_map >> dptdin_map[] = { + {160, 0x04}, {180, 0x24}, {200, 0x44}, >> {210, 0x06}, + {240, 0x26}, {250, 0x46}, {270, 0x08}, >> {300, 0x28}, + {330, 0x48}, {360, 0x2a}, {400, 0x4a}, >> {450, 0x0c}, + {500, 0x2c}, {550, 0x0e}, {600, 0x2e}, >> {650, 0x10}, + {700, 0x30}, {750, 0x12}, {800, 0x32}, >> {850, 0x14}, + {900, 0x34}, {950, 0x54}, {1000, 0x74} +}; >> + +static inline struct imx_mipi_dsi *bridge_to_imxdsi(struct >> drm_bridge *br) +{ + return container_of(br, struct >> imx_mipi_dsi, bridge); +} + +static int >> +imx_mipi_dsi_bridge_atomic_check(struct drm_bridge *bridge, + >> struct drm_bridge_state *bridge_state, + >> struct drm_crtc_state *crtc_state, + >> struct drm_connector_state *conn_state) +{ + struct >> imx_crtc_state *imx_crtc_state = to_imx_crtc_state(crtc_state); >> + + /* The following values are taken from >> dw_hdmi_imx_atomic_check */ + imx_crtc_state->bus_format >> = MEDIA_BUS_FMT_RGB888_1X24; + >> imx_crtc_state->di_hsync_pin = 2; + >> imx_crtc_state->di_vsync_pin = 3; + + return 0; +} + >> +static void imx_mipi_dsi_bridge_atomic_enable(struct >> drm_bridge *bridge, + >> struct drm_bridge_state *old_st) +{ + struct >> imx_mipi_dsi *dsi = bridge_to_imxdsi(bridge); + int mux = >> drm_of_encoder_active_port_id(dsi->dev->of_node, + >> &dsi->encoder); + /* Set IOMUX DSI output reg to correct IPU >> 1 or 0 and DI 1 or 0 ports */ + >> regmap_update_bits(dsi->mux_sel, IOMUXC_GPR3, + >> IMX6Q_GPR3_MIPI_MUX_CTL_MASK, + mux << >> IMX6Q_GPR3_MIPI_MUX_CTL_SHIFT); +} + +static const struct >> drm_bridge_funcs imx_dsi_bridge_funcs = { + .atomic_enable = >> imx_mipi_dsi_bridge_atomic_enable, + .atomic_check = >> imx_mipi_dsi_bridge_atomic_check, + .atomic_reset = >> drm_atomic_helper_bridge_reset, + .atomic_duplicate_state = >> drm_atomic_helper_bridge_duplicate_state, + >> .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, >> +}; + +static enum drm_mode_status imx_mipi_dsi_mode_valid(void >> *priv_data, + const >> struct drm_display_mode *mode) +{ + /* + * The >> VID_PKT_SIZE field in the DSI_VID_PKT_CFG + * register is >> 11-bit. + */ + if (mode->hdisplay > 0x7ff) + >> return MODE_BAD_HVALUE; + + /* + * The V_ACTIVE_LINES >> field in the DSI_VTIMING_CFG + * register is 11-bit. + >> */ + if (mode->vdisplay > 0x7ff) + return >> MODE_BAD_VVALUE; + + return MODE_OK; +} + + +static unsigned >> int max_mbps_to_testdin(unsigned int max_mbps) +{ + unsigned >> int i; + + for (i = 0; i < ARRAY_SIZE(dptdin_map); i++) + >> if (dptdin_map[i].max_mbps == max_mbps) + >> return dptdin_map[i].testdin; + + return -EINVAL; +} + >> +static inline void dsi_write(struct imx_mipi_dsi *dsi, u32 >> reg, u32 val) +{ + writel(val, dsi->base + reg); +} + +static >> int imx_mipi_dsi_phy_init(void *priv_data) +{ + struct >> imx_mipi_dsi *dsi = priv_data; + int testdin; + + >> testdin = max_mbps_to_testdin(dsi->lane_mbps); + if >> (testdin < 0) { + DRM_DEV_ERROR(dsi->dev, + >> "failed to get testdin for %dmbps lane clock\n", + >> dsi->lane_mbps); + return testdin; + } + + >> dsi_write(dsi, DSI_PHY_IF_CTRL, PHY_IF_CTRL_RESET); + >> dsi_write(dsi, DSI_PWR_UP, POWERUP); + + dsi_write(dsi, >> DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR); + >> dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(0) >> | + PHY_TESTDIN(0x44)); + dsi_write(dsi, >> DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR); + >> dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | >> PHY_UNTESTCLR); + dsi_write(dsi, DSI_PHY_TST_CTRL1, >> PHY_UNTESTEN | PHY_TESTDOUT(0) | + >> PHY_TESTDIN(testdin)); + dsi_write(dsi, DSI_PHY_TST_CTRL0, >> PHY_TESTCLK | PHY_UNTESTCLR); + dsi_write(dsi, >> DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR); + + >> return 0; +} + +static int imx_mipi_dsi_get_lane_mbps(void >> *priv_data, + const struct >> drm_display_mode *mode, + >> unsigned long mode_flags, u32 lanes, + >> u32 format, unsigned int *lane_mbps) +{ + struct >> imx_mipi_dsi *dsi = priv_data; + int bpp; + unsigned >> int i, target_mbps, mpclk; + unsigned long pllref; + + >> bpp = mipi_dsi_pixel_format_to_bpp(format); + if (bpp < >> 0) { + DRM_DEV_ERROR(dsi->dev, "failed to get bpp >> for format %d: %d\n", + format, >> bpp); + return bpp; + } + + pllref = >> clk_get_rate(dsi->pllref_clk); + if (pllref != 27000000) + >> DRM_WARN("DSI pllref_clk not set to 27Mhz\n"); > > This pllref variable is only used to print this warning, what's > the point of warn and ignore it? If pllref is not set at 27MHz > what will happen? > According to the imx6 ref manual, 27Mhz is the maximum value of the D-PHY TX refclk used to drive the display in high-speed mode (in low power modes this clock is disabled). It's range is [6,27] Mhz. The manual-provided tables and examples for operating the controller always assumes the ref clk is set to 27Mhz which allows a maximum of 1Ghz pll and 125 Mhz byte clocks achieving 1000 lane mbps. This driver does the same thing as the imx manual if you look at the definition of `dptdin_map` above which is used to compute the maximum lane speed for the specific mode clock. In theory I guess power consumption can be lowered by using a less-than max value for the refclk, but I've never seen this done in practice and is very application specific... Of course, if this is a real power-save gain and people care about it, optimized tables can be added later :) If refclk is not set to 27Mhz, in the worst case, the configuration done in imx_mipi_dsi_phy_init() and imx_mipi_dsi_get_lane_mbps() based on the values provided in `dptdin_map` won't be able to drive the display. So I guess the best course of action is to drop this warn and make it an error in the platform driver bind() when enabling the clock, right? >> + + mpclk = DIV_ROUND_UP(mode->clock, MSEC_PER_SEC); + if >> (mpclk) { + /* take 1/0.7 blanking overhead into >> consideration */ + target_mbps = (mpclk * (bpp / >> lanes) * 10) / 7; + } else { + >> DRM_DEV_ERROR(dsi->dev, "use default 1Gbps DPHY pll clock\n"); > > That's really an error? Looks to me that's just a fallback if > mpclk is zero. Maybe set the level to INFO or even better > DEBUG. > Yes, I will do this and all the other suggestions you made below. Thanks! BTW I also noticed the below prints are wrong, will also fix them. >> + target_mbps = 1000; + } + + >> DRM_DEV_DEBUG(dsi->dev, "target pllref_clk frequency is >> %uMbps\n", + target_mbps); + + for (i = 0; i < >> ARRAY_SIZE(dptdin_map); i++) { + if (target_mbps < >> dptdin_map[i].max_mbps) { + *lane_mbps = >> dptdin_map[i].max_mbps; + dsi->lane_mbps = >> *lane_mbps; + DRM_DEV_DEBUG(dsi->dev, + >> "real pllref_clk frequency is %uMbps\n", + >> *lane_mbps); + return 0; + } >> + } + + DRM_DEV_ERROR(dsi->dev, "DPHY clock frequency >> %uMbps is out of range\n", + target_mbps); + + >> return -EINVAL; +} + +static int >> +dw_mipi_dsi_phy_get_timing(void *priv_data, unsigned int >> lane_mbps, + struct dw_mipi_dsi_dphy_timing >> *timing) +{ + timing->clk_hs2lp = 0x40; + >> timing->clk_lp2hs = 0x40; + timing->data_hs2lp = 0x40; + >> timing->data_lp2hs = 0x40; + + return 0; +} + +static >> const struct dw_mipi_dsi_phy_ops dw_mipi_dsi_imx6_phy_ops = { + >> .init = imx_mipi_dsi_phy_init, + .get_lane_mbps = >> imx_mipi_dsi_get_lane_mbps, + .get_timing = >> dw_mipi_dsi_phy_get_timing, +}; + +static struct >> dw_mipi_dsi_plat_data imx6_mipi_dsi_drv_data = { + >> .max_data_lanes = 2, + .mode_valid = >> imx_mipi_dsi_mode_valid, + .phy_ops = >> &dw_mipi_dsi_imx6_phy_ops, +}; + +static const struct >> of_device_id imx_dsi_dt_ids[] = { + { + >> .compatible = "fsl,imx6-mipi-dsi", + .data = >> &imx6_mipi_dsi_drv_data, + }, + { /* sentinel */ } +}; >> +MODULE_DEVICE_TABLE(of, imx_dsi_dt_ids); + +static int >> imx_mipi_dsi_bind(struct device *dev, struct device *master, + >> void *data) +{ + struct imx_mipi_dsi *dsi = >> dev_get_drvdata(dev); + struct drm_device *drm = data; + >> int ret; + + ret = clk_prepare_enable(dsi->pllref_clk); + if >> (ret) { + DRM_DEV_ERROR(dev, "Failed to enable >> pllref_clk: %d\n", ret); + return ret; + } + + >> ret = imx_drm_encoder_parse_of(drm, &dsi->encoder, >> dsi->dev->of_node); + if (ret) + return >> ret; + + ret = drm_simple_encoder_init(drm, &dsi->encoder, >> DRM_MODE_ENCODER_NONE); + if (ret) { + >> DRM_DEV_ERROR(dev, "failed to create drm encoder\n"); + >> return ret; + } + + drm_bridge_add(&dsi->bridge); > > You are adding the bridge in imx_mipi_dsi_bind() but removing in > imx_mipi_dsi_remove(). Although in this case I don't think there > is any bad effect, would be nice maintain the symetry, so I'd > move the drm_bridge_add() call to the imx_mipi_dis_probe() > function just before component_add(). > >> + + drm_bridge_attach(&dsi->encoder, &dsi->bridge, NULL, 0); + >> if (ret < 0) { + DRM_DEV_ERROR(dev, "failed to >> attach IMX6 bridge: %d\n", ret); + return ret; > > If it fails you probably want to cleanup the encoder > drm_cleanup_encoder() > >> + } >> + >> + ret = dw_mipi_dsi_bind(dsi->mipi_dsi, &dsi->encoder, &dsi->bridge); >> + if (ret) { >> + DRM_DEV_ERROR(dev, "Failed to bind: %d\n", ret); >> + return ret; > > The same here. > >> + } >> + >> + return 0; >> +} >> + >> +static void imx_mipi_dsi_unbind(struct device *dev, struct device *master, >> + void *data) >> +{ >> + struct imx_mipi_dsi *dsi = dev_get_drvdata(dev); >> + >> + dw_mipi_dsi_unbind(dsi->mipi_dsi); >> + > > drm_encoder_cleanup() ? > >> + clk_disable_unprepare(dsi->pllref_clk); >> +} >> + >> +static const struct component_ops imx_mipi_dsi_ops = { >> + .bind = imx_mipi_dsi_bind, >> + .unbind = imx_mipi_dsi_unbind, >> +}; >> + >> +static int imx_mipi_dsi_probe(struct platform_device *pdev) >> +{ >> + struct device *dev = &pdev->dev; >> + const struct of_device_id *of_id = of_match_device(imx_dsi_dt_ids, dev); >> + struct dw_mipi_dsi_plat_data *pdata = (struct dw_mipi_dsi_plat_data *) of_id->data; >> + struct imx_mipi_dsi *dsi; >> + struct resource *res; >> + int ret; >> + >> + dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL); >> + if (!dsi) >> + return -ENOMEM; >> + >> + dsi->dev = dev; >> + >> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> + dsi->base = devm_ioremap_resource(dev, res); >> + if (IS_ERR(dsi->base)) { >> + ret = PTR_ERR(dsi->base); >> + DRM_DEV_ERROR(dev, "Unable to get dsi registers: %d\n", ret); >> + return ret; > > This print is redundant, devm_ioremap_resource will print an error already. This > code can be simply > return PTR_ERR(res); > >> + } >> + >> + dsi->pllref_clk = devm_clk_get(dev, "ref"); >> + if (IS_ERR(dsi->pllref_clk)) { >> + ret = PTR_ERR(dsi->pllref_clk); >> + DRM_DEV_ERROR(dev, "Unable to get pllref_clk: %d\n", ret); > > This print is redundant, devm_clk_get will print an error already. This code can > be simply > return PTR_ERR(dsi->pllref_clk); > >> + return ret; >> + } >> + >> + dsi->mux_sel = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,gpr"); >> + if (IS_ERR(dsi->mux_sel)) { >> + ret = PTR_ERR(dsi->mux_sel); >> + DRM_DEV_ERROR(dev, "Failed to get GPR regmap: %d\n", ret); >> + return ret; >> + } >> + >> + dev_set_drvdata(dev, dsi); >> + >> + imx6_mipi_dsi_drv_data.base = dsi->base; >> + imx6_mipi_dsi_drv_data.priv_data = dsi; >> + >> + dsi->bridge.driver_private = dsi; >> + dsi->bridge.funcs = &imx_dsi_bridge_funcs; >> + dsi->bridge.of_node = dev->of_node; > > You probably want to set the bridge.type here too: > > dsi->bridge.type = DRM_MODE_CONNECTOR_DSI; > >> + >> + dsi->mipi_dsi = dw_mipi_dsi_probe(pdev, pdata); >> + if (IS_ERR(dsi->mipi_dsi)) { >> + ret = PTR_ERR(dsi->mipi_dsi); >> + DRM_DEV_ERROR(dev, "Failed to probe DW DSI host: %d\n", ret); >> + goto err_clkdisable; >> + } >> + >> + return component_add(&pdev->dev, &imx_mipi_dsi_ops); >> + >> +err_clkdisable: >> + clk_disable_unprepare(dsi->pllref_clk); >> + return ret; >> +} >> + >> +static int imx_mipi_dsi_remove(struct platform_device *pdev) >> +{ >> + struct imx_mipi_dsi *dsi = platform_get_drvdata(pdev); >> + drm_bridge_remove(&dsi->bridge); >> + component_del(&pdev->dev, &imx_mipi_dsi_ops); >> + return 0; >> +} >> + >> +static struct platform_driver imx_mipi_dsi_driver = { >> + .probe = imx_mipi_dsi_probe, >> + .remove = imx_mipi_dsi_remove, >> + .driver = { >> + .of_match_table = imx_dsi_dt_ids, >> + .name = "dw-mipi-dsi-imx6", >> + }, >> +}; >> +module_platform_driver(imx_mipi_dsi_driver); >> + >> +MODULE_DESCRIPTION("i.MX6 MIPI DSI host controller driver"); >> +MODULE_AUTHOR("Liu Ying "); >> +MODULE_AUTHOR("Adrian Ratiu "); >> +MODULE_LICENSE("GPL"); >> _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel