From: Maxime Ripard <maxime@cerno.tech>
To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
Eric Anholt <eric@anholt.net>
Cc: Tim Gover <tim.gover@raspberrypi.com>,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
bcm-kernel-feedback-list@broadcom.com,
linux-rpi-kernel@lists.infradead.org,
Phil Elwell <phil@raspberrypi.com>,
linux-arm-kernel@lists.infradead.org,
Maxime Ripard <maxime@cerno.tech>
Subject: [PATCH v2 66/91] drm/vc4: hdmi: Move accessors to vc4_hdmi
Date: Fri, 24 Apr 2020 17:34:47 +0200 [thread overview]
Message-ID: <8f10682da8c4928a350091249e7f3f8ed94d98d5.1587742492.git-series.maxime@cerno.tech> (raw)
In-Reply-To: <cover.d1e741d37e43e1ba2d2ecd93fc81d42a6df99d14.1587742492.git-series.maxime@cerno.tech>
The current driver only supports a single HDMI controller, and part of
the issue is that the main vc4_dev structure holds a pointer to its
(only) HDMI controller, and the HDMI registers accessors will use it to
retrieve the mapped addresses.
Let's modify those accessors to use directly the vc4_hdmi structure so
that we can eventually get rid of that single global pointer.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 22 ++++++++--------------
drivers/gpu/drm/vc4/vc4_hdmi.h | 8 ++++----
2 files changed, 12 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index c5fdac191404..7a98520665e3 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -122,6 +122,7 @@ vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
{
struct drm_device *dev = connector->dev;
struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct vc4_hdmi *vc4_hdmi = vc4->hdmi;
if (vc4->hdmi->hpd_gpio) {
if (gpio_get_value_cansleep(vc4->hdmi->hpd_gpio) ^
@@ -238,6 +239,7 @@ static int vc4_hdmi_stop_packet(struct drm_encoder *encoder,
{
struct drm_device *dev = encoder->dev;
struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct vc4_hdmi *vc4_hdmi = vc4->hdmi;
u32 packet_id = type - 0x80;
HDMI_WRITE(VC4_HDMI_RAM_PACKET_CONFIG,
@@ -252,6 +254,7 @@ static void vc4_hdmi_write_infoframe(struct drm_encoder *encoder,
{
struct drm_device *dev = encoder->dev;
struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct vc4_hdmi *vc4_hdmi = vc4->hdmi;
u32 packet_id = frame->any.type - 0x80;
u32 packet_reg = VC4_HDMI_RAM_PACKET(packet_id);
uint8_t buffer[VC4_HDMI_PACKET_STRIDE];
@@ -631,9 +634,6 @@ static const struct drm_encoder_helper_funcs vc4_hdmi_encoder_helper_funcs = {
/* HDMI audio codec callbacks */
static void vc4_hdmi_audio_set_mai_clock(struct vc4_hdmi *vc4_hdmi)
{
- struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
- struct drm_device *drm = encoder->dev;
- struct vc4_dev *vc4 = to_vc4_dev(drm);
u32 hsm_clock = clk_get_rate(vc4_hdmi->hsm_clock);
unsigned long n, m;
@@ -653,8 +653,6 @@ static void vc4_hdmi_set_n_cts(struct vc4_hdmi *vc4_hdmi)
{
struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
struct drm_crtc *crtc = encoder->crtc;
- struct drm_device *drm = encoder->dev;
- struct vc4_dev *vc4 = to_vc4_dev(drm);
const struct drm_display_mode *mode = &crtc->state->adjusted_mode;
u32 samplerate = vc4_hdmi->audio.samplerate;
u32 n, cts;
@@ -691,7 +689,6 @@ static int vc4_hdmi_audio_startup(struct snd_pcm_substream *substream,
struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
struct drm_connector *connector = &vc4_hdmi->connector.base;
- struct vc4_dev *vc4 = to_vc4_dev(encoder->dev);
int ret;
if (vc4_hdmi->audio.substream && vc4_hdmi->audio.substream != substream)
@@ -722,9 +719,7 @@ static int vc4_hdmi_audio_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
static void vc4_hdmi_audio_reset(struct vc4_hdmi *vc4_hdmi)
{
struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
- struct drm_device *drm = encoder->dev;
struct device *dev = &vc4_hdmi->pdev->dev;
- struct vc4_dev *vc4 = to_vc4_dev(drm);
int ret;
ret = vc4_hdmi_stop_packet(encoder, HDMI_INFOFRAME_TYPE_AUDIO);
@@ -755,10 +750,7 @@ static int vc4_hdmi_audio_hw_params(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
- struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
- struct drm_device *drm = encoder->dev;
struct device *dev = &vc4_hdmi->pdev->dev;
- struct vc4_dev *vc4 = to_vc4_dev(drm);
u32 audio_packet_config, channel_mask;
u32 channel_map, i;
@@ -829,8 +821,6 @@ static int vc4_hdmi_audio_trigger(struct snd_pcm_substream *substream, int cmd,
{
struct vc4_hdmi *vc4_hdmi = dai_to_hdmi(dai);
struct drm_encoder *encoder = &vc4_hdmi->encoder.base.base;
- struct drm_device *drm = encoder->dev;
- struct vc4_dev *vc4 = to_vc4_dev(drm);
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
@@ -1090,7 +1080,8 @@ static irqreturn_t vc4_cec_irq_handler_thread(int irq, void *priv)
static void vc4_cec_read_msg(struct vc4_dev *vc4, u32 cntrl1)
{
- struct cec_msg *msg = &vc4->hdmi->cec_rx_msg;
+ struct vc4_hdmi *vc4_hdmi = vc4->hdmi;
+ struct cec_msg *msg = &vc4_hdmi->cec_rx_msg;
unsigned int i;
msg->len = 1 + ((cntrl1 & VC4_HDMI_CEC_REC_WRD_CNT_MASK) >>
@@ -1136,6 +1127,7 @@ static irqreturn_t vc4_cec_irq_handler(int irq, void *priv)
static int vc4_hdmi_cec_adap_enable(struct cec_adapter *adap, bool enable)
{
struct vc4_dev *vc4 = cec_get_drvdata(adap);
+ struct vc4_hdmi *vc4_hdmi = vc4->hdmi;
/* clock period in microseconds */
const u32 usecs = 1000000 / CEC_CLOCK_FREQ;
u32 val = HDMI_READ(VC4_HDMI_CEC_CNTRL_5);
@@ -1179,6 +1171,7 @@ static int vc4_hdmi_cec_adap_enable(struct cec_adapter *adap, bool enable)
static int vc4_hdmi_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr)
{
struct vc4_dev *vc4 = cec_get_drvdata(adap);
+ struct vc4_hdmi *vc4_hdmi = vc4->hdmi;
HDMI_WRITE(VC4_HDMI_CEC_CNTRL_1,
(HDMI_READ(VC4_HDMI_CEC_CNTRL_1) & ~VC4_HDMI_CEC_ADDR_MASK) |
@@ -1190,6 +1183,7 @@ static int vc4_hdmi_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
u32 signal_free_time, struct cec_msg *msg)
{
struct vc4_dev *vc4 = cec_get_drvdata(adap);
+ struct vc4_hdmi *vc4_hdmi = vc4->hdmi;
u32 val;
unsigned int i;
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 17079a39f1b1..cdc9d90f62ac 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -78,9 +78,9 @@ struct vc4_hdmi {
struct debugfs_regset32 hd_regset;
};
-#define HDMI_READ(offset) readl(vc4->hdmi->hdmicore_regs + offset)
-#define HDMI_WRITE(offset, val) writel(val, vc4->hdmi->hdmicore_regs + offset)
-#define HD_READ(offset) readl(vc4->hdmi->hd_regs + offset)
-#define HD_WRITE(offset, val) writel(val, vc4->hdmi->hd_regs + offset)
+#define HDMI_READ(offset) readl(vc4_hdmi->hdmicore_regs + offset)
+#define HDMI_WRITE(offset, val) writel(val, vc4_hdmi->hdmicore_regs + offset)
+#define HD_READ(offset) readl(vc4_hdmi->hd_regs + offset)
+#define HD_WRITE(offset, val) writel(val, vc4_hdmi->hd_regs + offset)
#endif /* _VC4_HDMI_H_ */
--
git-series 0.9.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-04-24 20:11 UTC|newest]
Thread overview: 142+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-24 15:33 [PATCH v2 00/91] drm/vc4: Support BCM2711 Display Pipeline Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 01/91] i2c: brcmstb: Allow to compile it on BCM2835 Maxime Ripard
2020-04-24 16:13 ` Wolfram Sang
2020-04-24 17:07 ` Florian Fainelli
2020-04-24 19:04 ` Wolfram Sang
2020-04-26 7:44 ` Wolfram Sang
2020-04-24 15:33 ` [PATCH v2 02/91] dt-bindings: arm: bcm: Convert BCM2835 firmware binding to YAML Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 03/91] dt-bindings: clock: Add a binding for the RPi Firmware clocks Maxime Ripard
2020-05-11 21:47 ` Rob Herring
2020-05-13 8:13 ` Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 04/91] firmware: rpi: Only create clocks device if we don't have a node for it Maxime Ripard
2020-04-27 11:24 ` Nicolas Saenz Julienne
2020-04-28 13:50 ` Maxime Ripard
2020-04-30 16:27 ` Nicolas Saenz Julienne
2020-04-24 15:33 ` [PATCH v2 05/91] clk: bcm: rpi: Allow the driver to be probed by DT Maxime Ripard
2020-04-30 16:19 ` Nicolas Saenz Julienne
2020-04-24 15:33 ` [PATCH v2 06/91] clk: bcm: rpi: Statically init clk_init_data Maxime Ripard
2020-05-27 6:47 ` Stephen Boyd
2020-04-24 15:33 ` [PATCH v2 07/91] clk: bcm: rpi: Use clk_hw_register for pllb_arm Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 08/91] clk: bcm: rpi: Remove global pllb_arm clock pointer Maxime Ripard
2020-05-27 6:48 ` Stephen Boyd
2020-04-24 15:33 ` [PATCH v2 09/91] clk: bcm: rpi: Make sure pllb_arm is removed Maxime Ripard
2020-05-27 6:48 ` Stephen Boyd
2020-04-24 15:33 ` [PATCH v2 10/91] clk: bcm: rpi: Remove pllb_arm_lookup global pointer Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 11/91] clk: bcm: rpi: Switch to clk_hw_register_clkdev Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 12/91] clk: bcm: rpi: Make sure the clkdev lookup is removed Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 13/91] clk: bcm: rpi: Create a data structure for the clocks Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 14/91] clk: bcm: rpi: Add clock id to data Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 15/91] clk: bcm: rpi: Pass the clocks data to the firmware function Maxime Ripard
2020-05-27 6:49 ` Stephen Boyd
2020-04-24 15:33 ` [PATCH v2 16/91] clk: bcm: rpi: Rename is_prepared function Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 17/91] clk: bcm: rpi: Split pllb clock hooks Maxime Ripard
2020-04-24 15:33 ` [PATCH v2 18/91] clk: bcm: rpi: Make the PLLB registration function return a clk_hw Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 19/91] clk: bcm: rpi: Add DT provider for the clocks Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 20/91] clk: bcm: rpi: Discover the firmware clocks Maxime Ripard
2020-05-04 12:05 ` Nicolas Saenz Julienne
2020-05-15 8:19 ` Maxime Ripard
2020-05-21 9:13 ` Nicolas Saenz Julienne
2020-05-27 7:03 ` Stephen Boyd
2020-04-24 15:34 ` [PATCH v2 21/91] ARM: dts: bcm2711: Add firmware clocks node Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 22/91] reset: Move reset-simple header out of drivers/reset Maxime Ripard
2020-05-06 9:26 ` Philipp Zabel
2020-05-13 11:52 ` Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 23/91] reset: simple: Add reset callback Maxime Ripard
2020-05-06 9:26 ` Philipp Zabel
2020-04-24 15:34 ` [PATCH v2 24/91] dt-bindings: clock: Add BCM2711 DVP binding Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 25/91] clk: bcm: Add BCM2711 DVP driver Maxime Ripard
2020-05-27 7:06 ` Stephen Boyd
2020-04-24 15:34 ` [PATCH v2 26/91] ARM: dts: bcm2711: Add HDMI DVP Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 27/91] dt-bindings: display: Convert VC4 bindings to schemas Maxime Ripard
2020-04-27 21:32 ` Rob Herring
2020-04-24 15:34 ` [PATCH v2 28/91] dt-bindings: display: vc4: dpi: Add missing clock-names property Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 29/91] dt-bindings: display: vc4: dsi: Add missing clock properties Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 30/91] dt-bindings: display: vc4: hdmi: Add missing clock-names property Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 31/91] dt-bindings: display: vc4: Document BCM2711 VC5 Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 32/91] drm/vc4: drv: Add include guards Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 33/91] drm/vc4: drv: Support BCM2711 Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 34/91] dt-bindings: display: Add support for the BCM2711 HVS Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 35/91] drm/vc4: Add support for the BCM2711 HVS5 Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 36/91] drm/vc4: hvs: Boost the core clock during modeset Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 37/91] drm/vc4: plane: Improve LBM usage Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 38/91] drm/vc4: plane: Move planes creation to its own function Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 39/91] drm/vc4: plane: Move additional planes creation to driver Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 40/91] drm/vc4: plane: Register all the planes at once Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 41/91] drm/vc4: plane: Create overlays for any CRTC Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 42/91] drm/vc4: plane: Create more planes Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 43/91] drm/vc4: crtc: Rename SoC data structures Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 44/91] drm/vc4: crtc: Move crtc state to common header Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 45/91] drm/vc4: crtc: Deal with different number of pixel per clock Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 46/91] drm/vc4: crtc: Use a shared interrupt Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 47/91] drm/vc4: crtc: Turn static const variable into a define Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 48/91] drm/vc4: crtc: Move the cob allocation outside of bind Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 49/91] drm/vc4: crtc: Rename HVS channel to output Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 50/91] drm/vc4: crtc: Use local chan variable Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 51/91] drm/vc4: crtc: Enable and disable the PV in atomic_enable / disable Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 52/91] drm/vc4: crtc: Assign output to channel automatically Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 53/91] drm/vc4: crtc: Add FIFO depth to vc4_crtc_data Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 54/91] drm/vc4: crtc: Add function to compute FIFO level bits Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 55/91] drm/vc4: crtc: Rename HDMI encoder type to HDMI0 Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 56/91] drm/vc4: crtc: Add HDMI1 encoder type Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 57/91] drm/vc4: crtc: Remove redundant call to drm_crtc_enable_color_mgmt Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 58/91] drm/vc4: crtc: Disable color management for HVS5 Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 59/91] dt-bindings: display: vc4: pv: Add BCM2711 pixel valves Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 60/91] drm/vc4: crtc: Add BCM2711 pixelvalves Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 61/91] drm/vc4: hdmi: Use debugfs private field Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 62/91] drm/vc4: hdmi: Move structure to header Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 63/91] drm/vc4: hdmi: rework connectors and encoders Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 64/91] drm/vc4: hdmi: Remove DDC argument to connector_init Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 65/91] drm/vc4: hdmi: Rename hdmi to vc4_hdmi Maxime Ripard
2020-04-24 15:34 ` Maxime Ripard [this message]
2020-04-24 15:34 ` [PATCH v2 67/91] drm/vc4: hdmi: Use local vc4_hdmi directly Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 68/91] drm/vc4: hdmi: Add container_of macros for encoders and connectors Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 69/91] drm/vc4: hdmi: Pass vc4_hdmi to CEC code Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 70/91] drm/vc4: hdmi: Remove vc4_dev hdmi pointer Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 71/91] drm/vc4: hdmi: Remove vc4_hdmi_connector Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 72/91] drm/vc4: hdmi: Introduce resource init and variant Maxime Ripard
2020-04-25 21:06 ` Stefan Wahren
2020-04-24 15:34 ` [PATCH v2 73/91] drm/vc4: hdmi: Implement a register layout abstraction Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 74/91] drm/vc4: hdmi: Add reset callback Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 75/91] drm/vc4: hdmi: Add PHY init and disable function Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 76/91] drm/vc4: hdmi: Add PHY RNG enable / " Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 77/91] drm/vc4: hdmi: Add a CSC setup callback Maxime Ripard
2020-04-24 15:34 ` [PATCH v2 78/91] drm/vc4: hdmi: Store the encoder type in the variant structure Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 79/91] drm/vc4: hdmi: Deal with multiple debugfs files Maxime Ripard
2020-04-25 21:26 ` Stefan Wahren
2020-04-28 15:57 ` Maxime Ripard
2020-04-28 16:19 ` Dave Stevenson
2020-04-24 15:35 ` [PATCH v2 80/91] drm/vc4: hdmi: Move CEC init to its own function Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 81/91] drm/vc4: hdmi: Add CEC support flag Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 82/91] drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV define Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 83/91] drm/vc4: hdmi: Rename drm_encoder pointer in mode_valid Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 84/91] drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 85/91] drm/vc4: hdmi: Use reg-names to retrieve the HDMI audio registers Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 86/91] drm/vc4: hdmi: Reset audio infoframe on encoder_enable if previously streaming Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 87/91] drm/vc4: hdmi: Set the b-frame marker to the match ALSA's default Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 88/91] drm/vc4: hdmi: Add audio-related callbacks Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 89/91] drm/vc4: hdmi: Support the BCM2711 HDMI controllers Maxime Ripard
2020-05-07 17:36 ` Stefan Wahren
2020-04-24 15:35 ` [PATCH v2 90/91] dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings Maxime Ripard
2020-05-11 21:50 ` Rob Herring
2020-05-13 8:16 ` Maxime Ripard
2020-04-24 15:35 ` [PATCH v2 91/91] ARM: dts: bcm2711: Enable the display pipeline Maxime Ripard
2020-04-25 20:54 ` Stefan Wahren
2020-04-28 14:11 ` Maxime Ripard
2020-04-27 7:23 ` [PATCH v2 00/91] drm/vc4: Support BCM2711 Display Pipelin Jian-Hong Pan
2020-04-28 16:21 ` Maxime Ripard
2020-05-04 6:35 ` Jian-Hong Pan
2020-05-07 17:21 ` Maxime Ripard
2020-05-08 6:20 ` Jian-Hong Pan
2020-05-11 3:12 ` Jian-Hong Pan
2020-05-25 11:11 ` Maxime Ripard
2020-05-26 10:20 ` Maxime Ripard
2020-05-27 3:49 ` Daniel Drake
2020-05-27 9:13 ` Maxime Ripard
2020-05-27 9:15 ` Daniel Drake
2020-05-28 7:30 ` Maxime Ripard
2020-06-01 7:58 ` Jian-Hong Pan
2020-06-02 11:04 ` Maxime Ripard
2020-06-05 8:44 ` Jian-Hong Pan
2020-06-29 14:21 ` Maxime Ripard
2020-06-30 8:26 ` Jian-Hong Pan
2020-07-03 12:56 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8f10682da8c4928a350091249e7f3f8ed94d98d5.1587742492.git-series.maxime@cerno.tech \
--to=maxime@cerno.tech \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=eric@anholt.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=nsaenzjulienne@suse.de \
--cc=phil@raspberrypi.com \
--cc=tim.gover@raspberrypi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).